diff mbox series

[PULL,v2,07/10] docs/specs/tpm: Document TPM_TIS sysbus device for ARM

Message ID 20200305193855.278878-8-stefanb@linux.vnet.ibm.com (mailing list archive)
State New, archived
Headers show
Series [PULL,v2,01/10] tpm: rename TPM_TIS into TPM_TIS_ISA | expand

Commit Message

Stefan Berger March 5, 2020, 7:38 p.m. UTC 
From: Eric Auger <eric.auger@redhat.com>

Update the documentation with recent changes related to the
sysbus TPM_TIS device addition and add the command line
to be used with arm VIRT.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200305165149.618-8-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
---
 docs/specs/tpm.rst | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/docs/specs/tpm.rst b/docs/specs/tpm.rst
index 2bdf637f55..da9eb39ca9 100644
--- a/docs/specs/tpm.rst
+++ b/docs/specs/tpm.rst
@@ -18,9 +18,15 @@  The TIS interface makes a memory mapped IO region in the area
 0xfed40000-0xfed44fff available to the guest operating system.
 
 QEMU files related to TPM TIS interface:
- - ``hw/tpm/tpm_tis.c``
+ - ``hw/tpm/tpm_tis_common.c``
+ - ``hw/tpm/tpm_tis_isa.c``
+ - ``hw/tpm/tpm_tis_sysbus.c``
  - ``hw/tpm/tpm_tis.h``
 
+Both an ISA device and a sysbus device are available. The former is
+used with pc/q35 machine while the latter can be instantiated in the
+ARM virt machine.
+
 CRB interface
 -------------
 
@@ -325,6 +331,23 @@  In case a pSeries machine is emulated, use the following command line:
     -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x3,drive=drive-virtio-disk0,id=virtio-disk0 \
     -drive file=test.img,format=raw,if=none,id=drive-virtio-disk0
 
+In case an ARM virt machine is emulated, use the following command line:
+
+.. code-block:: console
+
+  qemu-system-aarch64 -machine virt,gic-version=3,accel=kvm \
+    -cpu host -m 4G \
+    -nographic -no-acpi \
+    -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
+    -tpmdev emulator,id=tpm0,chardev=chrtpm \
+    -device tpm-tis-device,tpmdev=tpm0 \
+    -device virtio-blk-pci,drive=drv0 \
+    -drive format=qcow2,file=hda.qcow2,if=none,id=drv0 \
+    -drive if=pflash,format=raw,file=flash0.img,readonly \
+    -drive if=pflash,format=raw,file=flash1.img
+
+  On ARM, ACPI boot with TPM is not yet supported.
+
 In case SeaBIOS is used as firmware, it should show the TPM menu item
 after entering the menu with 'ESC'.