diff mbox series

[1/2] hw/arm: fsl-imx25: Wire up eSDHC controllers

Message ID 20200310215146.19688-2-linux@roeck-us.net (mailing list archive)
State New, archived
Headers show
Series hw/arm: fsl-imx25: Connect eSDHC and USB controllers | expand

Commit Message

Guenter Roeck March 10, 2020, 9:51 p.m. UTC
Wire up eSDHC controllers in fsl-imx25. For imx25-pdk, connect drives
provided on the command line to available eSDHC controllers.

This patch enables booting the imx25-pdk emulation from SD card.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 hw/arm/fsl-imx25.c         | 32 ++++++++++++++++++++++++++++++++
 hw/arm/imx25_pdk.c         | 16 ++++++++++++++++
 include/hw/arm/fsl-imx25.h |  9 +++++++++
 3 files changed, 57 insertions(+)
diff mbox series

Patch

diff --git a/hw/arm/fsl-imx25.c b/hw/arm/fsl-imx25.c
index da3471b395..f977c42426 100644
--- a/hw/arm/fsl-imx25.c
+++ b/hw/arm/fsl-imx25.c
@@ -31,6 +31,8 @@ 
 #include "hw/qdev-properties.h"
 #include "chardev/char.h"
 
+#define IMX25_ESDHC_CAPABILITIES     0x07e20000
+
 static void fsl_imx25_init(Object *obj)
 {
     FslIMX25State *s = FSL_IMX25(obj);
@@ -74,6 +76,11 @@  static void fsl_imx25_init(Object *obj)
         sysbus_init_child_obj(obj, "gpio[*]", &s->gpio[i], sizeof(s->gpio[i]),
                               TYPE_IMX_GPIO);
     }
+
+    for (i = 0; i < FSL_IMX25_NUM_ESDHCS; i++) {
+        sysbus_init_child_obj(obj, "sdhc[*]", &s->esdhc[i], sizeof(s->esdhc[i]),
+                              TYPE_IMX_USDHC);
+    }
 }
 
 static void fsl_imx25_realize(DeviceState *dev, Error **errp)
@@ -246,6 +253,31 @@  static void fsl_imx25_realize(DeviceState *dev, Error **errp)
                                             gpio_table[i].irq));
     }
 
+    /* Initialize all SDHC */
+    for (i = 0; i < FSL_IMX25_NUM_ESDHCS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } esdhc_table[FSL_IMX25_NUM_ESDHCS] = {
+            { FSL_IMX25_ESDHC1_ADDR, FSL_IMX25_ESDHC1_IRQ },
+            { FSL_IMX25_ESDHC2_ADDR, FSL_IMX25_ESDHC2_IRQ },
+        };
+
+        object_property_set_uint(OBJECT(&s->esdhc[i]), 2, "sd-spec-version",
+                                 &err);
+        object_property_set_uint(OBJECT(&s->esdhc[i]), IMX25_ESDHC_CAPABILITIES,
+                                 "capareg", &err);
+        object_property_set_bool(OBJECT(&s->esdhc[i]), true, "realized", &err);
+        if (err) {
+            error_propagate(errp, err);
+            return;
+        }
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->esdhc[i]), 0, esdhc_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->esdhc[i]), 0,
+                           qdev_get_gpio_in(DEVICE(&s->avic),
+                                            esdhc_table[i].irq));
+    }
+
     /* initialize 2 x 16 KB ROM */
     memory_region_init_rom(&s->rom[0], NULL,
                            "imx25.rom0", FSL_IMX25_ROM0_SIZE, &err);
diff --git a/hw/arm/imx25_pdk.c b/hw/arm/imx25_pdk.c
index 26713d9a7e..b3ca82bafa 100644
--- a/hw/arm/imx25_pdk.c
+++ b/hw/arm/imx25_pdk.c
@@ -26,6 +26,7 @@ 
 #include "qemu/osdep.h"
 #include "qapi/error.h"
 #include "cpu.h"
+#include "hw/qdev-properties.h"
 #include "hw/arm/fsl-imx25.h"
 #include "hw/boards.h"
 #include "qemu/error-report.h"
@@ -120,6 +121,21 @@  static void imx25_pdk_init(MachineState *machine)
     imx25_pdk_binfo.board_id = 1771,
     imx25_pdk_binfo.nb_cpus = 1;
 
+    for (i = 0; i < FSL_IMX25_NUM_ESDHCS; i++) {
+        BusState *bus;
+        DeviceState *carddev;
+        DriveInfo *di;
+        BlockBackend *blk;
+
+        di = drive_get_next(IF_SD);
+        blk = di ? blk_by_legacy_dinfo(di) : NULL;
+        bus = qdev_get_child_bus(DEVICE(&s->soc.esdhc[i]), "sd-bus");
+        carddev = qdev_create(bus, TYPE_SD_CARD);
+        qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
+        object_property_set_bool(OBJECT(carddev), true,
+                                 "realized", &error_fatal);
+    }
+
     /*
      * We test explicitly for qtest here as it is not done (yet?) in
      * arm_load_kernel(). Without this the "make check" command would
diff --git a/include/hw/arm/fsl-imx25.h b/include/hw/arm/fsl-imx25.h
index 1c86bb55fb..4e2d4868cd 100644
--- a/include/hw/arm/fsl-imx25.h
+++ b/include/hw/arm/fsl-imx25.h
@@ -27,6 +27,7 @@ 
 #include "hw/misc/imx_rngc.h"
 #include "hw/i2c/imx_i2c.h"
 #include "hw/gpio/imx_gpio.h"
+#include "hw/sd/sdhci.h"
 #include "exec/memory.h"
 #include "target/arm/cpu.h"
 
@@ -38,6 +39,7 @@ 
 #define FSL_IMX25_NUM_EPITS 2
 #define FSL_IMX25_NUM_I2CS 3
 #define FSL_IMX25_NUM_GPIOS 4
+#define FSL_IMX25_NUM_ESDHCS 2
 
 typedef struct FslIMX25State {
     /*< private >*/
@@ -54,6 +56,7 @@  typedef struct FslIMX25State {
     IMXRNGCState   rngc;
     IMXI2CState    i2c[FSL_IMX25_NUM_I2CS];
     IMXGPIOState   gpio[FSL_IMX25_NUM_GPIOS];
+    SDHCIState     esdhc[FSL_IMX25_NUM_ESDHCS];
     MemoryRegion   rom[2];
     MemoryRegion   iram;
     MemoryRegion   iram_alias;
@@ -215,6 +218,10 @@  typedef struct FslIMX25State {
 #define FSL_IMX25_GPIO3_SIZE    0x4000
 #define FSL_IMX25_RNGC_ADDR     0x53FB0000
 #define FSL_IMX25_RNGC_SIZE     0x4000
+#define FSL_IMX25_ESDHC1_ADDR   0x53FB4000
+#define FSL_IMX25_ESDHC1_SIZE   0x4000
+#define FSL_IMX25_ESDHC2_ADDR   0x53FB8000
+#define FSL_IMX25_ESDHC2_SIZE   0x4000
 #define FSL_IMX25_GPIO1_ADDR    0x53FCC000
 #define FSL_IMX25_GPIO1_SIZE    0x4000
 #define FSL_IMX25_GPIO2_ADDR    0x53FD0000
@@ -250,5 +257,7 @@  typedef struct FslIMX25State {
 #define FSL_IMX25_GPIO2_IRQ     51
 #define FSL_IMX25_GPIO3_IRQ     16
 #define FSL_IMX25_GPIO4_IRQ     23
+#define FSL_IMX25_ESDHC1_IRQ    9
+#define FSL_IMX25_ESDHC2_IRQ    8
 
 #endif /* FSL_IMX25_H */