diff mbox series

[PULL,v1,13/14] target/microblaze: gdb: Fix incorrect SReg reporting

Message ID 20200514141402.12498-14-edgar.iglesias@gmail.com (mailing list archive)
State New, archived
Headers show
Series [PULL,v1,01/14] hw/net/xilinx_axienet: Auto-clear PHY Autoneg | expand

Commit Message

Edgar E. Iglesias May 14, 2020, 2:14 p.m. UTC
From: Joe Komlodi <joe.komlodi@xilinx.com>

SRegs used to be reported to GDB by iterating over the SRegs array,
however we do not store them in an order that allows them to be
reported to GDB in that way.

To fix this, a simple map is used to map the register GDB wants to its
location in the SRegs array.

Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <1589393329-223076-3-git-send-email-komlodi@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---
 target/microblaze/gdbstub.c | 59 ++++++++++++++++++++++++++++++-------
 1 file changed, 49 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/target/microblaze/gdbstub.c b/target/microblaze/gdbstub.c
index 54cc7857d1..73e8973597 100644
--- a/target/microblaze/gdbstub.c
+++ b/target/microblaze/gdbstub.c
@@ -25,6 +25,21 @@  int mb_cpu_gdb_read_register(CPUState *cs, GByteArray *mem_buf, int n)
 {
     MicroBlazeCPU *cpu = MICROBLAZE_CPU(cs);
     CPUMBState *env = &cpu->env;
+    /*
+     * GDB expects SREGs in the following order:
+     * PC, MSR, EAR, ESR, FSR, BTR, EDR, PID, ZPR, TLBX, TLBSX, TLBLO, TLBHI.
+     * They aren't stored in this order, so make a map.
+     * PID, ZPR, TLBx, TLBsx, TLBLO, and TLBHI aren't modeled, so we don't
+     * map them to anything and return a value of 0 instead.
+     */
+    static const uint8_t sreg_map[6] = {
+        SR_PC,
+        SR_MSR,
+        SR_EAR,
+        SR_ESR,
+        SR_FSR,
+        SR_BTR
+    };
 
     /*
      * GDB expects registers to be reported in this order:
@@ -40,15 +55,16 @@  int mb_cpu_gdb_read_register(CPUState *cs, GByteArray *mem_buf, int n)
         n -= 32;
         switch (n) {
         case 0 ... 5:
-            return gdb_get_reg32(mem_buf, env->sregs[n]);
+            return gdb_get_reg32(mem_buf, env->sregs[sreg_map[n]]);
         /* PVR12 is intentionally skipped */
         case 6 ... 17:
             n -= 6;
             return gdb_get_reg32(mem_buf, env->pvr.regs[n]);
-        case 18 ... 24:
-            /* Add an offset of 6 to resume where we left off with SRegs */
-            n = n - 18 + 6;
-            return gdb_get_reg32(mem_buf, env->sregs[n]);
+        case 18:
+            return gdb_get_reg32(mem_buf, env->sregs[SR_EDR]);
+        /* Other SRegs aren't modeled, so report a value of 0 */
+        case 19 ... 24:
+            return gdb_get_reg32(mem_buf, 0);
         case 25:
             return gdb_get_reg32(mem_buf, env->slr);
         case 26:
@@ -66,29 +82,52 @@  int mb_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
     CPUMBState *env = &cpu->env;
     uint32_t tmp;
 
+    /*
+     * GDB expects SREGs in the following order:
+     * PC, MSR, EAR, ESR, FSR, BTR, EDR, PID, ZPR, TLBX, TLBSX, TLBLO, TLBHI.
+     * They aren't stored in this order, so make a map.
+     * PID, ZPR, TLBx, TLBsx, TLBLO, and TLBHI aren't modeled, so we don't
+     * map them to anything.
+     */
+    static const uint8_t sreg_map[6] = {
+        SR_PC,
+        SR_MSR,
+        SR_EAR,
+        SR_ESR,
+        SR_FSR,
+        SR_BTR
+    };
+
     if (n > cc->gdb_num_core_regs) {
         return 0;
     }
 
     tmp = ldl_p(mem_buf);
 
+    /*
+     * GDB expects registers to be reported in this order:
+     * R0-R31
+     * PC-BTR
+     * PVR0-PVR11
+     * EDR-TLBHI
+     * SLR-SHR
+     */
     if (n < 32) {
         env->regs[n] = tmp;
     } else {
         n -= 32;
         switch (n) {
         case 0 ... 5:
-            env->sregs[n] = tmp;
+            env->sregs[sreg_map[n]] = tmp;
             break;
         /* PVR12 is intentionally skipped */
         case 6 ... 17:
             n -= 6;
             env->pvr.regs[n] = tmp;
             break;
-        case 18 ... 24:
-            /* Add an offset of 6 to resume where we left off with SRegs */
-            n = n - 18 + 6;
-            env->sregs[n] = tmp;
+        /* Only EDR is modeled in these indeces, so ignore the rest */
+        case 18:
+            env->sregs[SR_EDR] = tmp;
             break;
         case 25:
             env->slr = tmp;