diff mbox series

[v3,1/5] qdev: Introduce DEFINE_PROP_RESERVED_REGION

Message ID 20200611151209.22547-2-eric.auger@redhat.com (mailing list archive)
State New, archived
Headers show
Series VIRTIO-IOMMU probe request support and MSI bypass on ARM | expand

Commit Message

Eric Auger June 11, 2020, 3:12 p.m. UTC
Introduce a new property defining a reserved region:
<low address>, <high address>, <type>.

This will be used to encode reserved IOVA regions.

For instance, in virtio-iommu use case, reserved IOVA regions
will be passed by the machine code to the virtio-iommu-pci
device (an array of those). The type of the reserved region
will match the virtio_iommu_probe_resv_mem subtype value:
- VIRTIO_IOMMU_RESV_MEM_T_RESERVED (0)
- VIRTIO_IOMMU_RESV_MEM_T_MSI (1)

on PC/Q35 machine, this will be used to inform the
virtio-iommu-pci device it should bypass the MSI region.
The reserved region will be: 0xfee00000, 0xfeefffff, 1.

On ARM, we can declare the ITS MSI doorbell as an MSI
region to prevent MSIs from being mapped on guest side.

Signed-off-by: Eric Auger <eric.auger@redhat.com>

---

v11 -> v12:
- rename into DEFINE_PROP_RESERVED_REGION
- do not use g_strsplit anymore, use endptr instead
- remove 0x references
---
 include/exec/memory.h        |  6 +++
 include/hw/qdev-properties.h |  3 ++
 include/qemu/typedefs.h      |  1 +
 hw/core/qdev-properties.c    | 89 ++++++++++++++++++++++++++++++++++++
 4 files changed, 99 insertions(+)

Comments

Markus Armbruster June 22, 2020, 11:22 a.m. UTC | #1
Eric Auger <eric.auger@redhat.com> writes:

> Introduce a new property defining a reserved region:
> <low address>, <high address>, <type>.
>
> This will be used to encode reserved IOVA regions.
>
> For instance, in virtio-iommu use case, reserved IOVA regions
> will be passed by the machine code to the virtio-iommu-pci
> device (an array of those). The type of the reserved region
> will match the virtio_iommu_probe_resv_mem subtype value:
> - VIRTIO_IOMMU_RESV_MEM_T_RESERVED (0)
> - VIRTIO_IOMMU_RESV_MEM_T_MSI (1)
>
> on PC/Q35 machine, this will be used to inform the
> virtio-iommu-pci device it should bypass the MSI region.
> The reserved region will be: 0xfee00000, 0xfeefffff, 1.
>
> On ARM, we can declare the ITS MSI doorbell as an MSI
> region to prevent MSIs from being mapped on guest side.
>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>
> ---
>
> v11 -> v12:
> - rename into DEFINE_PROP_RESERVED_REGION
> - do not use g_strsplit anymore, use endptr instead
> - remove 0x references
> ---
>  include/exec/memory.h        |  6 +++
>  include/hw/qdev-properties.h |  3 ++
>  include/qemu/typedefs.h      |  1 +
>  hw/core/qdev-properties.c    | 89 ++++++++++++++++++++++++++++++++++++
>  4 files changed, 99 insertions(+)
>
> diff --git a/include/exec/memory.h b/include/exec/memory.h
> index 3e00cdbbfa..3ee8224fa7 100644
> --- a/include/exec/memory.h
> +++ b/include/exec/memory.h
> @@ -57,6 +57,12 @@ struct MemoryRegionMmio {
>      CPUWriteMemoryFunc *write[3];
>  };
>  
> +struct ReservedRegion {
> +    hwaddr low;
> +    hwaddr high;
> +    unsigned int type;
> +};
> +
>  typedef struct IOMMUTLBEntry IOMMUTLBEntry;
>  
>  /* See address_space_translate: bit 0 is read, bit 1 is write.  */
> diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h
> index f161604fb6..03bf850a7e 100644
> --- a/include/hw/qdev-properties.h
> +++ b/include/hw/qdev-properties.h
> @@ -19,6 +19,7 @@ extern const PropertyInfo qdev_prop_string;
>  extern const PropertyInfo qdev_prop_chr;
>  extern const PropertyInfo qdev_prop_tpm;
>  extern const PropertyInfo qdev_prop_macaddr;
> +extern const PropertyInfo qdev_prop_reserved_region;
>  extern const PropertyInfo qdev_prop_on_off_auto;
>  extern const PropertyInfo qdev_prop_multifd_compression;
>  extern const PropertyInfo qdev_prop_losttickpolicy;
> @@ -183,6 +184,8 @@ extern const PropertyInfo qdev_prop_pcie_link_width;
>      DEFINE_PROP(_n, _s, _f, qdev_prop_drive_iothread, BlockBackend *)
>  #define DEFINE_PROP_MACADDR(_n, _s, _f)         \
>      DEFINE_PROP(_n, _s, _f, qdev_prop_macaddr, MACAddr)
> +#define DEFINE_PROP_RESERVED_REGION(_n, _s, _f)         \
> +    DEFINE_PROP(_n, _s, _f, qdev_prop_reserved_region, ReservedRegion)
>  #define DEFINE_PROP_ON_OFF_AUTO(_n, _s, _f, _d) \
>      DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_on_off_auto, OnOffAuto)
>  #define DEFINE_PROP_MULTIFD_COMPRESSION(_n, _s, _f, _d) \
> diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
> index ecf3cde26c..85c4f891f4 100644
> --- a/include/qemu/typedefs.h
> +++ b/include/qemu/typedefs.h
> @@ -59,6 +59,7 @@ typedef struct ISABus ISABus;
>  typedef struct ISADevice ISADevice;
>  typedef struct IsaDma IsaDma;
>  typedef struct MACAddr MACAddr;
> +typedef struct ReservedRegion ReservedRegion;
>  typedef struct MachineClass MachineClass;
>  typedef struct MachineState MachineState;
>  typedef struct MemoryListener MemoryListener;
> diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
> index cc924815da..15b84adbee 100644
> --- a/hw/core/qdev-properties.c
> +++ b/hw/core/qdev-properties.c
> @@ -14,6 +14,7 @@
>  #include "qapi/visitor.h"
>  #include "chardev/char.h"
>  #include "qemu/uuid.h"
> +#include "qemu/cutils.h"
>  
>  void qdev_prop_set_after_realize(DeviceState *dev, const char *name,
>                                    Error **errp)
> @@ -577,6 +578,94 @@ const PropertyInfo qdev_prop_macaddr = {
>      .set   = set_mac,
>  };
>  
> +/* --- Reserved Region --- */
> +
> +/*
> + * accepted syntax version:
> + *   <low address>,<high address>,<type>
> + *   where low/high addresses are uint64_t in hexadecimal
> + *   and type is an unsigned integer in decimal
> + */
> +static void get_reserved_region(Object *obj, Visitor *v, const char *name,
> +                                void *opaque, Error **errp)
> +{
> +    DeviceState *dev = DEVICE(obj);
> +    Property *prop = opaque;
> +    ReservedRegion *rr = qdev_get_prop_ptr(dev, prop);
> +    char buffer[64];
> +    char *p = buffer;
> +
> +    snprintf(buffer, sizeof(buffer), "0x%"PRIx64",0x%"PRIx64",%u",
> +             rr->low, rr->high, rr->type);

Matches existing practice in other getters.  Nevertheless, I'd suggest
something like

       n = snprintf(buffer, sizeof(buffer), ...);
       assert(n < sizeof(buffer);

> +
> +    visit_type_str(v, name, &p, errp);
> +}
> +
> +static void set_reserved_region(Object *obj, Visitor *v, const char *name,
> +                                void *opaque, Error **errp)
> +{
> +    DeviceState *dev = DEVICE(obj);
> +    Property *prop = opaque;
> +    ReservedRegion *rr = qdev_get_prop_ptr(dev, prop);
> +    Error *local_err = NULL;
> +    const char *endptr;
> +    char *str;
> +    int ret;
> +
> +    if (dev->realized) {
> +        qdev_prop_set_after_realize(dev, name, errp);
> +        return;
> +    }
> +
> +    visit_type_str(v, name, &str, &local_err);
> +    if (local_err) {
> +        error_propagate(errp, local_err);
> +        return;
> +    }
> +
> +    ret = qemu_strtou64(str, &endptr, 16, &rr->low);
> +    if (ret) {
> +        error_setg(errp, "Failed to decode reserved region low addr");
> +        error_append_hint(errp,
> +                          "should be an address in hexadecimal\n");

Comes out like this:

    qemu-system-x86_64: -device ...: Failed to decode reserved region low addr
    should be an address in hexadecimal

I'd capitalize the other way, to get

    qemu-system-x86_64: -device ...: failed to decode reserved region low addr
    Should be an address in hexadecimal

Note: output is made up; I failed at figuring out how to use the new
property.  An example in PATCH 4's commit message might help.

Since the error message fails to mention @name, the user is left
guessing unless "-device ..." contains just one reserved region
parameter.

What about something like this:

           error_setg(errp, "start address of reserved region '%s'"
                      " must be a hexadecimal integer",
                      name);

No need to mess around with error_append_hint() then.

Same for the other error messages.

> +        goto out;
> +    }
> +    if (*endptr != ',') {
> +        goto separator_error;
> +    }
> +
> +    ret = qemu_strtou64(endptr + 1, &endptr, 16, &rr->high);
> +    if (ret) {
> +        error_setg(errp, "Failed to decode reserved region high addr");
> +        error_append_hint(errp,
> +                          "should be an address in hexadecimal\n");
> +        goto out;
> +    }
> +    if (*endptr != ',') {
> +        goto separator_error;
> +    }
> +
> +    ret = qemu_strtoui(endptr + 1, &endptr, 10, &rr->type);
> +    if (ret) {
> +        error_setg(errp, "Failed to decode reserved region type");
> +        error_append_hint(errp, "should be an unsigned integer in decimal\n");
> +    }

I dimly remember discussing the wisdom of numeric type here, dig, dig,
..., aha:

    Subject: Re: [PATCH for-5.0 v11 12/20] qapi: Introduce DEFINE_PROP_INTERVAL
    Date: Fri, 13 Dec 2019 11:03:02 +0100
    Message-ID: <87y2vg4k6h.fsf@dusky.pond.sub.org>

    >> So the "label" part of "<low address>,<high address>,label" is a number?
    > yes it is.
    >> 
    >> Is a number appropriate for your use case, or would an enum be better?
    > I think a number is OK. There might be other types of reserved regions
    > in the future. Also if we want to allow somebody else to reuse that
    > property in another context, I would rather leave it open?

    I'd prioritize the user interface over possible reuse (which might never
    happen).  Mind, I'm not telling you using numbers is a bad user
    interface.  In general, enums are nicer, but I don't know enough about
    this particular case.

> +    goto out;
> +
> +separator_error:
> +    error_setg(errp, "reserved region fields must be separated with commas");

I'm not sure de-duplicating this error message is worth the extra goto.

> +out:
> +    g_free(str);
> +    return;
> +}
> +
> +const PropertyInfo qdev_prop_reserved_region = {
> +    .name  = "reserved_region",
> +    .description = "Reserved Region, example: 0xFEE00000,0xFEEFFFFF,0",
> +    .get   = get_reserved_region,
> +    .set   = set_reserved_region,
> +};
> +
>  /* --- on/off/auto --- */
>  
>  const PropertyInfo qdev_prop_on_off_auto = {

Can't find anything that's actually wrong, so

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Eric Auger June 23, 2020, 8:22 a.m. UTC | #2
Hi Markus,

On 6/22/20 1:22 PM, Markus Armbruster wrote:
> Eric Auger <eric.auger@redhat.com> writes:
> 
>> Introduce a new property defining a reserved region:
>> <low address>, <high address>, <type>.
>>
>> This will be used to encode reserved IOVA regions.
>>
>> For instance, in virtio-iommu use case, reserved IOVA regions
>> will be passed by the machine code to the virtio-iommu-pci
>> device (an array of those). The type of the reserved region
>> will match the virtio_iommu_probe_resv_mem subtype value:
>> - VIRTIO_IOMMU_RESV_MEM_T_RESERVED (0)
>> - VIRTIO_IOMMU_RESV_MEM_T_MSI (1)
>>
>> on PC/Q35 machine, this will be used to inform the
>> virtio-iommu-pci device it should bypass the MSI region.
>> The reserved region will be: 0xfee00000, 0xfeefffff, 1.
>>
>> On ARM, we can declare the ITS MSI doorbell as an MSI
>> region to prevent MSIs from being mapped on guest side.
>>
>> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>>
>> ---
>>
>> v11 -> v12:
>> - rename into DEFINE_PROP_RESERVED_REGION
>> - do not use g_strsplit anymore, use endptr instead
>> - remove 0x references
>> ---
>>  include/exec/memory.h        |  6 +++
>>  include/hw/qdev-properties.h |  3 ++
>>  include/qemu/typedefs.h      |  1 +
>>  hw/core/qdev-properties.c    | 89 ++++++++++++++++++++++++++++++++++++
>>  4 files changed, 99 insertions(+)
>>
>> diff --git a/include/exec/memory.h b/include/exec/memory.h
>> index 3e00cdbbfa..3ee8224fa7 100644
>> --- a/include/exec/memory.h
>> +++ b/include/exec/memory.h
>> @@ -57,6 +57,12 @@ struct MemoryRegionMmio {
>>      CPUWriteMemoryFunc *write[3];
>>  };
>>  
>> +struct ReservedRegion {
>> +    hwaddr low;
>> +    hwaddr high;
>> +    unsigned int type;
>> +};
>> +
>>  typedef struct IOMMUTLBEntry IOMMUTLBEntry;
>>  
>>  /* See address_space_translate: bit 0 is read, bit 1 is write.  */
>> diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h
>> index f161604fb6..03bf850a7e 100644
>> --- a/include/hw/qdev-properties.h
>> +++ b/include/hw/qdev-properties.h
>> @@ -19,6 +19,7 @@ extern const PropertyInfo qdev_prop_string;
>>  extern const PropertyInfo qdev_prop_chr;
>>  extern const PropertyInfo qdev_prop_tpm;
>>  extern const PropertyInfo qdev_prop_macaddr;
>> +extern const PropertyInfo qdev_prop_reserved_region;
>>  extern const PropertyInfo qdev_prop_on_off_auto;
>>  extern const PropertyInfo qdev_prop_multifd_compression;
>>  extern const PropertyInfo qdev_prop_losttickpolicy;
>> @@ -183,6 +184,8 @@ extern const PropertyInfo qdev_prop_pcie_link_width;
>>      DEFINE_PROP(_n, _s, _f, qdev_prop_drive_iothread, BlockBackend *)
>>  #define DEFINE_PROP_MACADDR(_n, _s, _f)         \
>>      DEFINE_PROP(_n, _s, _f, qdev_prop_macaddr, MACAddr)
>> +#define DEFINE_PROP_RESERVED_REGION(_n, _s, _f)         \
>> +    DEFINE_PROP(_n, _s, _f, qdev_prop_reserved_region, ReservedRegion)
>>  #define DEFINE_PROP_ON_OFF_AUTO(_n, _s, _f, _d) \
>>      DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_on_off_auto, OnOffAuto)
>>  #define DEFINE_PROP_MULTIFD_COMPRESSION(_n, _s, _f, _d) \
>> diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
>> index ecf3cde26c..85c4f891f4 100644
>> --- a/include/qemu/typedefs.h
>> +++ b/include/qemu/typedefs.h
>> @@ -59,6 +59,7 @@ typedef struct ISABus ISABus;
>>  typedef struct ISADevice ISADevice;
>>  typedef struct IsaDma IsaDma;
>>  typedef struct MACAddr MACAddr;
>> +typedef struct ReservedRegion ReservedRegion;
>>  typedef struct MachineClass MachineClass;
>>  typedef struct MachineState MachineState;
>>  typedef struct MemoryListener MemoryListener;
>> diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
>> index cc924815da..15b84adbee 100644
>> --- a/hw/core/qdev-properties.c
>> +++ b/hw/core/qdev-properties.c
>> @@ -14,6 +14,7 @@
>>  #include "qapi/visitor.h"
>>  #include "chardev/char.h"
>>  #include "qemu/uuid.h"
>> +#include "qemu/cutils.h"
>>  
>>  void qdev_prop_set_after_realize(DeviceState *dev, const char *name,
>>                                    Error **errp)
>> @@ -577,6 +578,94 @@ const PropertyInfo qdev_prop_macaddr = {
>>      .set   = set_mac,
>>  };
>>  
>> +/* --- Reserved Region --- */
>> +
>> +/*
>> + * accepted syntax version:
>> + *   <low address>,<high address>,<type>
>> + *   where low/high addresses are uint64_t in hexadecimal
>> + *   and type is an unsigned integer in decimal
>> + */
>> +static void get_reserved_region(Object *obj, Visitor *v, const char *name,
>> +                                void *opaque, Error **errp)
>> +{
>> +    DeviceState *dev = DEVICE(obj);
>> +    Property *prop = opaque;
>> +    ReservedRegion *rr = qdev_get_prop_ptr(dev, prop);
>> +    char buffer[64];
>> +    char *p = buffer;
>> +
>> +    snprintf(buffer, sizeof(buffer), "0x%"PRIx64",0x%"PRIx64",%u",
>> +             rr->low, rr->high, rr->type);
> 
> Matches existing practice in other getters.  Nevertheless, I'd suggest
> something like
> 
>        n = snprintf(buffer, sizeof(buffer), ...);
>        assert(n < sizeof(buffer);
OK
> 
>> +
>> +    visit_type_str(v, name, &p, errp);
>> +}
>> +
>> +static void set_reserved_region(Object *obj, Visitor *v, const char *name,
>> +                                void *opaque, Error **errp)
>> +{
>> +    DeviceState *dev = DEVICE(obj);
>> +    Property *prop = opaque;
>> +    ReservedRegion *rr = qdev_get_prop_ptr(dev, prop);
>> +    Error *local_err = NULL;
>> +    const char *endptr;
>> +    char *str;
>> +    int ret;
>> +
>> +    if (dev->realized) {
>> +        qdev_prop_set_after_realize(dev, name, errp);
>> +        return;
>> +    }
>> +
>> +    visit_type_str(v, name, &str, &local_err);
>> +    if (local_err) {
>> +        error_propagate(errp, local_err);
>> +        return;
>> +    }
>> +
>> +    ret = qemu_strtou64(str, &endptr, 16, &rr->low);
>> +    if (ret) {
>> +        error_setg(errp, "Failed to decode reserved region low addr");
>> +        error_append_hint(errp,
>> +                          "should be an address in hexadecimal\n");
> 
> Comes out like this:
> 
>     qemu-system-x86_64: -device ...: Failed to decode reserved region low addr
>     should be an address in hexadecimal
> 
> I'd capitalize the other way, to get
> 
>     qemu-system-x86_64: -device ...: failed to decode reserved region low addr
>     Should be an address in hexadecimal
> 
> Note: output is made up; I failed at figuring out how to use the new
> property.  An example in PATCH 4's commit message might help.
OK I will add one example. In practice in the virtio-iommu case the
property is not really meant to be passed by the end-user but should be
set by the machine code. However I have just tested from the cmd line
and it looks using commas as separators is a bad idea because it
collides with ',' separating properties. So if you're OK I will change
the comma into ':'.

> 
> Since the error message fails to mention @name, the user is left
> guessing unless "-device ..." contains just one reserved region
> parameter.
> 
> What about something like this:
> 
>            error_setg(errp, "start address of reserved region '%s'"
>                       " must be a hexadecimal integer",
>                       name);
Sure. Given the fact the property is named reserved-region[n], this may
be simplified into
            error_setg(errp, "start address of '%s'"
                       " must be a hexadecimal integer",
>                      name);
> 
> No need to mess around with error_append_hint() then.
OK
> 
> Same for the other error messages.
> 
>> +        goto out;
>> +    }
>> +    if (*endptr != ',') {
>> +        goto separator_error;
>> +    }
>> +
>> +    ret = qemu_strtou64(endptr + 1, &endptr, 16, &rr->high);
>> +    if (ret) {
>> +        error_setg(errp, "Failed to decode reserved region high addr");
>> +        error_append_hint(errp,
>> +                          "should be an address in hexadecimal\n");
>> +        goto out;
>> +    }
>> +    if (*endptr != ',') {
>> +        goto separator_error;
>> +    }
>> +
>> +    ret = qemu_strtoui(endptr + 1, &endptr, 10, &rr->type);
>> +    if (ret) {
>> +        error_setg(errp, "Failed to decode reserved region type");
>> +        error_append_hint(errp, "should be an unsigned integer in decimal\n");
>> +    }
> 
> I dimly remember discussing the wisdom of numeric type here, dig, dig,
> ..., aha:
> 
>     Subject: Re: [PATCH for-5.0 v11 12/20] qapi: Introduce DEFINE_PROP_INTERVAL
>     Date: Fri, 13 Dec 2019 11:03:02 +0100
>     Message-ID: <87y2vg4k6h.fsf@dusky.pond.sub.org>
> 
>     >> So the "label" part of "<low address>,<high address>,label" is a number?
>     > yes it is.
>     >> 
>     >> Is a number appropriate for your use case, or would an enum be better?
>     > I think a number is OK. There might be other types of reserved regions
>     > in the future. Also if we want to allow somebody else to reuse that
>     > property in another context, I would rather leave it open?
> 
>     I'd prioritize the user interface over possible reuse (which might never
>     happen).  Mind, I'm not telling you using numbers is a bad user
>     interface.  In general, enums are nicer, but I don't know enough about
>     this particular case.
Yep I remember too ;-) I left as it was because I think this property
could be used for other use cases.
> 
>> +    goto out;
>> +
>> +separator_error:
>> +    error_setg(errp, "reserved region fields must be separated with commas");
> 
> I'm not sure de-duplicating this error message is worth the extra goto.
> 
>> +out:
>> +    g_free(str);
>> +    return;
>> +}
>> +
>> +const PropertyInfo qdev_prop_reserved_region = {
>> +    .name  = "reserved_region",
>> +    .description = "Reserved Region, example: 0xFEE00000,0xFEEFFFFF,0",
>> +    .get   = get_reserved_region,
>> +    .set   = set_reserved_region,
>> +};
>> +
>>  /* --- on/off/auto --- */
>>  
>>  const PropertyInfo qdev_prop_on_off_auto = {
> 
> Can't find anything that's actually wrong, so
> 
> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Thanks

Eric
>
Markus Armbruster June 23, 2020, 8:57 a.m. UTC | #3
Auger Eric <eric.auger@redhat.com> writes:

> Hi Markus,
>
> On 6/22/20 1:22 PM, Markus Armbruster wrote:
>> Eric Auger <eric.auger@redhat.com> writes:
>> 
>>> Introduce a new property defining a reserved region:
>>> <low address>, <high address>, <type>.
>>>
>>> This will be used to encode reserved IOVA regions.
>>>
>>> For instance, in virtio-iommu use case, reserved IOVA regions
>>> will be passed by the machine code to the virtio-iommu-pci
>>> device (an array of those). The type of the reserved region
>>> will match the virtio_iommu_probe_resv_mem subtype value:
>>> - VIRTIO_IOMMU_RESV_MEM_T_RESERVED (0)
>>> - VIRTIO_IOMMU_RESV_MEM_T_MSI (1)
>>>
>>> on PC/Q35 machine, this will be used to inform the
>>> virtio-iommu-pci device it should bypass the MSI region.
>>> The reserved region will be: 0xfee00000, 0xfeefffff, 1.
>>>
>>> On ARM, we can declare the ITS MSI doorbell as an MSI
>>> region to prevent MSIs from being mapped on guest side.
>>>
>>> Signed-off-by: Eric Auger <eric.auger@redhat.com>
[...]
>>> diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
>>> index cc924815da..15b84adbee 100644
>>> --- a/hw/core/qdev-properties.c
>>> +++ b/hw/core/qdev-properties.c
[...]
>>> +static void set_reserved_region(Object *obj, Visitor *v, const char *name,
>>> +                                void *opaque, Error **errp)
>>> +{
>>> +    DeviceState *dev = DEVICE(obj);
>>> +    Property *prop = opaque;
>>> +    ReservedRegion *rr = qdev_get_prop_ptr(dev, prop);
>>> +    Error *local_err = NULL;
>>> +    const char *endptr;
>>> +    char *str;
>>> +    int ret;
>>> +
>>> +    if (dev->realized) {
>>> +        qdev_prop_set_after_realize(dev, name, errp);
>>> +        return;
>>> +    }
>>> +
>>> +    visit_type_str(v, name, &str, &local_err);
>>> +    if (local_err) {
>>> +        error_propagate(errp, local_err);
>>> +        return;
>>> +    }
>>> +
>>> +    ret = qemu_strtou64(str, &endptr, 16, &rr->low);
>>> +    if (ret) {
>>> +        error_setg(errp, "Failed to decode reserved region low addr");
>>> +        error_append_hint(errp,
>>> +                          "should be an address in hexadecimal\n");
>> 
>> Comes out like this:
>> 
>>     qemu-system-x86_64: -device ...: Failed to decode reserved region low addr
>>     should be an address in hexadecimal
>> 
>> I'd capitalize the other way, to get
>> 
>>     qemu-system-x86_64: -device ...: failed to decode reserved region low addr
>>     Should be an address in hexadecimal
>> 
>> Note: output is made up; I failed at figuring out how to use the new
>> property.  An example in PATCH 4's commit message might help.
> OK I will add one example. In practice in the virtio-iommu case the
> property is not really meant to be passed by the end-user but should be
> set by the machine code. However I have just tested from the cmd line
> and it looks using commas as separators is a bad idea because it
> collides with ',' separating properties. So if you're OK I will change
> the comma into ':'.

Please do.

[...]
Markus Armbruster June 23, 2020, 3:15 p.m. UTC | #4
Auger Eric <eric.auger@redhat.com> writes:

> Hi Markus,
>
> On 6/22/20 1:22 PM, Markus Armbruster wrote:
>> Eric Auger <eric.auger@redhat.com> writes:
>> 
>>> Introduce a new property defining a reserved region:
>>> <low address>, <high address>, <type>.
[...]
>> I dimly remember discussing the wisdom of numeric type here, dig, dig,
>> ..., aha:
>> 
>>     Subject: Re: [PATCH for-5.0 v11 12/20] qapi: Introduce DEFINE_PROP_INTERVAL
>>     Date: Fri, 13 Dec 2019 11:03:02 +0100
>>     Message-ID: <87y2vg4k6h.fsf@dusky.pond.sub.org>
>> 
>>     >> So the "label" part of "<low address>,<high address>,label" is a number?
>>     > yes it is.
>>     >> 
>>     >> Is a number appropriate for your use case, or would an enum be better?
>>     > I think a number is OK. There might be other types of reserved regions
>>     > in the future. Also if we want to allow somebody else to reuse that
>>     > property in another context, I would rather leave it open?
>> 
>>     I'd prioritize the user interface over possible reuse (which might never
>>     happen).  Mind, I'm not telling you using numbers is a bad user
>>     interface.  In general, enums are nicer, but I don't know enough about
>>     this particular case.
> Yep I remember too ;-) I left as it was because I think this property
> could be used for other use cases.

YAGNI :)

A string would work, too, wouldn't it?

[...]
Eric Auger June 23, 2020, 3:22 p.m. UTC | #5
Hi Markus,

On 6/23/20 5:15 PM, Markus Armbruster wrote:
> Auger Eric <eric.auger@redhat.com> writes:
> 
>> Hi Markus,
>>
>> On 6/22/20 1:22 PM, Markus Armbruster wrote:
>>> Eric Auger <eric.auger@redhat.com> writes:
>>>
>>>> Introduce a new property defining a reserved region:
>>>> <low address>, <high address>, <type>.
> [...]
>>> I dimly remember discussing the wisdom of numeric type here, dig, dig,
>>> ..., aha:
>>>
>>>     Subject: Re: [PATCH for-5.0 v11 12/20] qapi: Introduce DEFINE_PROP_INTERVAL
>>>     Date: Fri, 13 Dec 2019 11:03:02 +0100
>>>     Message-ID: <87y2vg4k6h.fsf@dusky.pond.sub.org>
>>>
>>>     >> So the "label" part of "<low address>,<high address>,label" is a number?
>>>     > yes it is.
>>>     >> 
>>>     >> Is a number appropriate for your use case, or would an enum be better?
>>>     > I think a number is OK. There might be other types of reserved regions
>>>     > in the future. Also if we want to allow somebody else to reuse that
>>>     > property in another context, I would rather leave it open?
>>>
>>>     I'd prioritize the user interface over possible reuse (which might never
>>>     happen).  Mind, I'm not telling you using numbers is a bad user
>>>     interface.  In general, enums are nicer, but I don't know enough about
>>>     this particular case.
>> Yep I remember too ;-) I left as it was because I think this property
>> could be used for other use cases.
> 
> YAGNI :)
> 
> A string would work, too, wouldn't it?
:-)

Eric
> 
> [...]
> 
>
diff mbox series

Patch

diff --git a/include/exec/memory.h b/include/exec/memory.h
index 3e00cdbbfa..3ee8224fa7 100644
--- a/include/exec/memory.h
+++ b/include/exec/memory.h
@@ -57,6 +57,12 @@  struct MemoryRegionMmio {
     CPUWriteMemoryFunc *write[3];
 };
 
+struct ReservedRegion {
+    hwaddr low;
+    hwaddr high;
+    unsigned int type;
+};
+
 typedef struct IOMMUTLBEntry IOMMUTLBEntry;
 
 /* See address_space_translate: bit 0 is read, bit 1 is write.  */
diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h
index f161604fb6..03bf850a7e 100644
--- a/include/hw/qdev-properties.h
+++ b/include/hw/qdev-properties.h
@@ -19,6 +19,7 @@  extern const PropertyInfo qdev_prop_string;
 extern const PropertyInfo qdev_prop_chr;
 extern const PropertyInfo qdev_prop_tpm;
 extern const PropertyInfo qdev_prop_macaddr;
+extern const PropertyInfo qdev_prop_reserved_region;
 extern const PropertyInfo qdev_prop_on_off_auto;
 extern const PropertyInfo qdev_prop_multifd_compression;
 extern const PropertyInfo qdev_prop_losttickpolicy;
@@ -183,6 +184,8 @@  extern const PropertyInfo qdev_prop_pcie_link_width;
     DEFINE_PROP(_n, _s, _f, qdev_prop_drive_iothread, BlockBackend *)
 #define DEFINE_PROP_MACADDR(_n, _s, _f)         \
     DEFINE_PROP(_n, _s, _f, qdev_prop_macaddr, MACAddr)
+#define DEFINE_PROP_RESERVED_REGION(_n, _s, _f)         \
+    DEFINE_PROP(_n, _s, _f, qdev_prop_reserved_region, ReservedRegion)
 #define DEFINE_PROP_ON_OFF_AUTO(_n, _s, _f, _d) \
     DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_on_off_auto, OnOffAuto)
 #define DEFINE_PROP_MULTIFD_COMPRESSION(_n, _s, _f, _d) \
diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
index ecf3cde26c..85c4f891f4 100644
--- a/include/qemu/typedefs.h
+++ b/include/qemu/typedefs.h
@@ -59,6 +59,7 @@  typedef struct ISABus ISABus;
 typedef struct ISADevice ISADevice;
 typedef struct IsaDma IsaDma;
 typedef struct MACAddr MACAddr;
+typedef struct ReservedRegion ReservedRegion;
 typedef struct MachineClass MachineClass;
 typedef struct MachineState MachineState;
 typedef struct MemoryListener MemoryListener;
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index cc924815da..15b84adbee 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -14,6 +14,7 @@ 
 #include "qapi/visitor.h"
 #include "chardev/char.h"
 #include "qemu/uuid.h"
+#include "qemu/cutils.h"
 
 void qdev_prop_set_after_realize(DeviceState *dev, const char *name,
                                   Error **errp)
@@ -577,6 +578,94 @@  const PropertyInfo qdev_prop_macaddr = {
     .set   = set_mac,
 };
 
+/* --- Reserved Region --- */
+
+/*
+ * accepted syntax version:
+ *   <low address>,<high address>,<type>
+ *   where low/high addresses are uint64_t in hexadecimal
+ *   and type is an unsigned integer in decimal
+ */
+static void get_reserved_region(Object *obj, Visitor *v, const char *name,
+                                void *opaque, Error **errp)
+{
+    DeviceState *dev = DEVICE(obj);
+    Property *prop = opaque;
+    ReservedRegion *rr = qdev_get_prop_ptr(dev, prop);
+    char buffer[64];
+    char *p = buffer;
+
+    snprintf(buffer, sizeof(buffer), "0x%"PRIx64",0x%"PRIx64",%u",
+             rr->low, rr->high, rr->type);
+
+    visit_type_str(v, name, &p, errp);
+}
+
+static void set_reserved_region(Object *obj, Visitor *v, const char *name,
+                                void *opaque, Error **errp)
+{
+    DeviceState *dev = DEVICE(obj);
+    Property *prop = opaque;
+    ReservedRegion *rr = qdev_get_prop_ptr(dev, prop);
+    Error *local_err = NULL;
+    const char *endptr;
+    char *str;
+    int ret;
+
+    if (dev->realized) {
+        qdev_prop_set_after_realize(dev, name, errp);
+        return;
+    }
+
+    visit_type_str(v, name, &str, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
+    }
+
+    ret = qemu_strtou64(str, &endptr, 16, &rr->low);
+    if (ret) {
+        error_setg(errp, "Failed to decode reserved region low addr");
+        error_append_hint(errp,
+                          "should be an address in hexadecimal\n");
+        goto out;
+    }
+    if (*endptr != ',') {
+        goto separator_error;
+    }
+
+    ret = qemu_strtou64(endptr + 1, &endptr, 16, &rr->high);
+    if (ret) {
+        error_setg(errp, "Failed to decode reserved region high addr");
+        error_append_hint(errp,
+                          "should be an address in hexadecimal\n");
+        goto out;
+    }
+    if (*endptr != ',') {
+        goto separator_error;
+    }
+
+    ret = qemu_strtoui(endptr + 1, &endptr, 10, &rr->type);
+    if (ret) {
+        error_setg(errp, "Failed to decode reserved region type");
+        error_append_hint(errp, "should be an unsigned integer in decimal\n");
+    }
+    goto out;
+
+separator_error:
+    error_setg(errp, "reserved region fields must be separated with commas");
+out:
+    g_free(str);
+    return;
+}
+
+const PropertyInfo qdev_prop_reserved_region = {
+    .name  = "reserved_region",
+    .description = "Reserved Region, example: 0xFEE00000,0xFEEFFFFF,0",
+    .get   = get_reserved_region,
+    .set   = set_reserved_region,
+};
+
 /* --- on/off/auto --- */
 
 const PropertyInfo qdev_prop_on_off_auto = {