[PULL,067/115] vfio/pci: Use kvm_irqchip_add_irqfd_notifier_gsi() for irqfds

Commit Message

Paolo Bonzini June 11, 2020, 7:44 p.m. UTC

From: Peter Xu <[e-mail]>

VFIO is currently the only one left that is not using the generic
function (kvm_irqchip_add_irqfd_notifier_gsi()) to register irqfds.
Let VFIO use the common framework too.

Follow up patches will introduce extra features for kvm irqfd, so that
VFIO can easily leverage that after the switch.

Reviewed-by: Eric Auger <[e-mail]>
Reviewed-by: Cornelia Huck <[e-mail]>
Reviewed-by: Alex Williamson <[e-mail]>
Acked-by: Alex Williamson <[e-mail]>
Signed-off-by: Peter Xu <[e-mail]>
Message-Id: <[e-mail]>
Signed-off-by: Paolo Bonzini <[e-mail]>
---
 hw/vfio/pci.c | 37 +++++++++++++++----------------------
 1 file changed, 15 insertions(+), 22 deletions(-)

Patch

diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 342dd6b912..6838bcc4b3 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -115,11 +115,7 @@  static void vfio_intx_eoi(VFIODevice *vbasedev)
 static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev, Error **errp)
 {
 #ifdef CONFIG_KVM
-    struct kvm_irqfd irqfd = {
-        .fd = event_notifier_get_fd(&vdev->intx.interrupt),
-        .gsi = vdev->intx.route.irq,
-        .flags = KVM_IRQFD_FLAG_RESAMPLE,
-    };
+    int irq_fd = event_notifier_get_fd(&vdev->intx.interrupt);
     Error *err = NULL;
 
     if (vdev->no_kvm_intx || !kvm_irqfds_enabled() ||
@@ -129,7 +125,7 @@  static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev, Error **errp)
     }
 
     /* Get to a known interrupt state */
-    qemu_set_fd_handler(irqfd.fd, NULL, NULL, vdev);
+    qemu_set_fd_handler(irq_fd, NULL, NULL, vdev);
     vfio_mask_single_irqindex(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX);
     vdev->intx.pending = false;
     pci_irq_deassert(&vdev->pdev);
@@ -140,17 +136,18 @@  static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev, Error **errp)
         goto fail;
     }
 
-    /* KVM triggers it, VFIO listens for it */
-    irqfd.resamplefd = event_notifier_get_fd(&vdev->intx.unmask);
-
-    if (kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd)) {
+    if (kvm_irqchip_add_irqfd_notifier_gsi(kvm_state,
+                                           &vdev->intx.interrupt,
+                                           &vdev->intx.unmask,
+                                           vdev->intx.route.irq)) {
         error_setg_errno(errp, errno, "failed to setup resample irqfd");
         goto fail_irqfd;
     }
 
     if (vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX, 0,
                                VFIO_IRQ_SET_ACTION_UNMASK,
-                               irqfd.resamplefd, &err)) {
+                               event_notifier_get_fd(&vdev->intx.unmask),
+                               &err)) {
         error_propagate(errp, err);
         goto fail_vfio;
     }
@@ -165,12 +162,12 @@  static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev, Error **errp)
     return;
 
 fail_vfio:
-    irqfd.flags = KVM_IRQFD_FLAG_DEASSIGN;
-    kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd);
+    kvm_irqchip_remove_irqfd_notifier_gsi(kvm_state, &vdev->intx.interrupt,
+                                          vdev->intx.route.irq);
 fail_irqfd:
     event_notifier_cleanup(&vdev->intx.unmask);
 fail:
-    qemu_set_fd_handler(irqfd.fd, vfio_intx_interrupt, NULL, vdev);
+    qemu_set_fd_handler(irq_fd, vfio_intx_interrupt, NULL, vdev);
     vfio_unmask_single_irqindex(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX);
 #endif
 }
@@ -178,12 +175,6 @@  fail:
 static void vfio_intx_disable_kvm(VFIOPCIDevice *vdev)
 {
 #ifdef CONFIG_KVM
-    struct kvm_irqfd irqfd = {
-        .fd = event_notifier_get_fd(&vdev->intx.interrupt),
-        .gsi = vdev->intx.route.irq,
-        .flags = KVM_IRQFD_FLAG_DEASSIGN,
-    };
-
     if (!vdev->intx.kvm_accel) {
         return;
     }
@@ -197,7 +188,8 @@  static void vfio_intx_disable_kvm(VFIOPCIDevice *vdev)
     pci_irq_deassert(&vdev->pdev);
 
     /* Tell KVM to stop listening for an INTx irqfd */
-    if (kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd)) {
+    if (kvm_irqchip_remove_irqfd_notifier_gsi(kvm_state, &vdev->intx.interrupt,
+                                              vdev->intx.route.irq)) {
         error_report("vfio: Error: Failed to disable INTx irqfd: %m");
     }
 
@@ -205,7 +197,8 @@  static void vfio_intx_disable_kvm(VFIOPCIDevice *vdev)
     event_notifier_cleanup(&vdev->intx.unmask);
 
     /* QEMU starts listening for interrupt events. */
-    qemu_set_fd_handler(irqfd.fd, vfio_intx_interrupt, NULL, vdev);
+    qemu_set_fd_handler(event_notifier_get_fd(&vdev->intx.interrupt),
+                        vfio_intx_interrupt, NULL, vdev);
 
     vdev->intx.kvm_accel = false;