@@ -628,19 +628,19 @@ static void create_v2m(VirtMachineState *vms)
static void create_gic(VirtMachineState *vms)
{
- MachineState *ms = MACHINE(vms);
/* We create a standalone GIC */
SysBusDevice *gicbusdev;
const char *gictype;
int type = vms->gic_version, i;
- unsigned int smp_cpus = ms->smp.cpus;
+ unsigned int max_cpus = vms->max_cpus;
+ unsigned int smp_cpus = vms->smp_cpus;
uint32_t nb_redist_regions = 0;
gictype = (type == 3) ? gicv3_class_name() : gic_class_name();
vms->gic = qdev_create(NULL, gictype);
qdev_prop_set_uint32(vms->gic, "revision", type);
- qdev_prop_set_uint32(vms->gic, "num-cpu", smp_cpus);
+ qdev_prop_set_uint32(vms->gic, "num-cpu", max_cpus);
/* Note that the num-irq property counts both internal and external
* interrupts; there are always 32 of the former (mandated by GIC spec).
*/
@@ -652,7 +652,7 @@ static void create_gic(VirtMachineState *vms)
if (type == 3) {
uint32_t redist0_capacity =
vms->memmap[VIRT_GIC_REDIST].size / GICV3_REDIST_SIZE;
- uint32_t redist0_count = MIN(smp_cpus, redist0_capacity);
+ uint32_t redist0_count = MIN(max_cpus, redist0_capacity);
nb_redist_regions = virt_gicv3_redist_region_count(vms);
@@ -665,7 +665,7 @@ static void create_gic(VirtMachineState *vms)
vms->memmap[VIRT_HIGH_GIC_REDIST2].size / GICV3_REDIST_SIZE;
qdev_prop_set_uint32(vms->gic, "redist-region-count[1]",
- MIN(smp_cpus - redist0_count, redist1_capacity));
+ MIN(max_cpus - redist0_count, redist1_capacity));
}
} else {
if (!kvm_irqchip_in_kernel()) {
@@ -722,7 +722,7 @@ static void create_gic(VirtMachineState *vms)
} else if (vms->virt) {
qemu_irq irq = qdev_get_gpio_in(vms->gic,
ppibase + ARCH_GIC_MAINT_IRQ);
- sysbus_connect_irq(gicbusdev, i + 4 * smp_cpus, irq);
+ sysbus_connect_irq(gicbusdev, i + 4 * max_cpus, irq);
}
qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
@@ -730,11 +730,11 @@ static void create_gic(VirtMachineState *vms)
+ VIRTUAL_PMU_IRQ));
sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
- sysbus_connect_irq(gicbusdev, i + smp_cpus,
+ sysbus_connect_irq(gicbusdev, i + max_cpus,
qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
- sysbus_connect_irq(gicbusdev, i + 2 * smp_cpus,
+ sysbus_connect_irq(gicbusdev, i + 2 * max_cpus,
qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
- sysbus_connect_irq(gicbusdev, i + 3 * smp_cpus,
+ sysbus_connect_irq(gicbusdev, i + 3 * max_cpus,
qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
}
@@ -348,11 +348,15 @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
s->cpu = g_new0(GICv3CPUState, s->num_cpu);
for (i = 0; i < s->num_cpu; i++) {
- CPUState *cpu = qemu_get_cpu(i);
+ CPUState *cpu = qemu_get_possible_cpu(i);
uint64_t cpu_affid;
int last;
- s->cpu[i].cpu = cpu;
+ if (qemu_present_cpu(cpu))
+ s->cpu[i].cpu = cpu;
+ else
+ s->cpu[i].cpu = NULL;
+
s->cpu[i].gic = s;
/* Store GICv3CPUState in CPUARMState gicv3state pointer */
gicv3_set_gicv3state(cpu, &s->cpu[i]);
@@ -779,6 +779,9 @@ void gicv3_cpuif_update(GICv3CPUState *cs)
ARMCPU *cpu = ARM_CPU(cs->cpu);
CPUARMState *env = &cpu->env;
+ if (!qemu_present_cpu(cs->cpu))
+ return;
+
g_assert(qemu_mutex_iothread_locked());
trace_gicv3_cpuif_update(gicv3_redist_affid(cs), cs->hppi.irq,
@@ -1654,6 +1657,9 @@ static void icc_generate_sgi(CPUARMState *env, GICv3CPUState *cs,
for (i = 0; i < s->num_cpu; i++) {
GICv3CPUState *ocs = &s->cpu[i];
+ if (!qemu_present_cpu(ocs->cpu))
+ continue;
+
if (irm) {
/* IRM == 1 : route to all CPUs except self */
if (cs == ocs) {
@@ -25,6 +25,7 @@
#include "hw/sysbus.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
+#include "sysemu/cpus.h"
#include "sysemu/kvm.h"
#include "sysemu/runstate.h"
#include "kvm_arm.h"
@@ -458,6 +459,17 @@ static void kvm_arm_gicv3_put(GICv3State *s)
GICv3CPUState *c = &s->cpu[ncpu];
int num_pri_bits;
+ /*
+ * To support hotplug of vcpus we need to make sure all gic cpuif/GICC
+ * are initialized at machvirt init time. Once the init is done we
+ * release the ARMCPU object for disabled vcpus but this leg could hit
+ * during reset of GICC later as well i.e. after init has happened and
+ * all of the cases we want to make sure we dont acess the GICC for
+ * the disabled VCPUs.
+ */
+ if (!qemu_present_cpu(c->cpu))
+ continue;
+
kvm_gicc_access(s, ICC_SRE_EL1, ncpu, &c->icc_sre_el1, true);
kvm_gicc_access(s, ICC_CTLR_EL1, ncpu,
&c->icc_ctlr_el1[GICV3_NS], true);
@@ -677,10 +689,21 @@ static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri)
return;
}
+ /*
+ * This shall be called even when vcpu is being hotplugged and other vcpus
+ * might be running. Host kernel KVM code to handle device access of IOCTLs
+ * KVM_{GET|SET}_DEVICE_ATTR might fail due to inability to grab vcpu locks
+ * for all the vcpus. Hence, we need to pause all vcpus to facilitate
+ * locking within host.
+ */
+ if (!qemu_present_cpu(c->cpu))
+ pause_all_vcpus();
/* Initialize to actual HW supported configuration */
kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS,
KVM_VGIC_ATTR(ICC_CTLR_EL1, c->gicr_typer),
&c->icc_ctlr_el1[GICV3_NS], false, &error_abort);
+ if (!qemu_present_cpu(c->cpu))
+ resume_all_vcpus();
c->icc_ctlr_el1[GICV3_S] = c->icc_ctlr_el1[GICV3_NS];
}
@@ -788,9 +811,9 @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp)
}
for (i = 0; i < s->num_cpu; i++) {
- ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i));
-
- define_arm_cp_regs(cpu, gicv3_cpuif_reginfo);
+ CPUState *cs = qemu_get_cpu(i);
+ if (qemu_present_cpu(cs))
+ define_arm_cp_regs(ARM_CPU(cs), gicv3_cpuif_reginfo);
}
/* Try to create the device via the device control API */
@@ -178,7 +178,7 @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms)
assert(vms->gic_version == VIRT_GIC_VERSION_3);
- return vms->smp_cpus > redist0_capacity ? 2 : 1;
+ return vms->max_cpus > redist0_capacity ? 2 : 1;
}
#endif /* QEMU_ARM_VIRT_H */
GIC needs to be pre-sized with possible vcpus at the initialization time. This is necessary because Memory regions and resources associated with GICC/GICR etc cannot be changed (add/del/modified) after VM has inited. Also, GIC_TYPER needs to be initialized with mp_affinity and cpu interface number association. This cannot be changed after GIC has initialized. Once all the cpu interfaces of the GIC has been inited it needs to be ensured that any updations to the GICC during reset only takes place for the present vcpus and not the disabled ones. Therefore, proper checks are required at various places. Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> --- hw/arm/virt.c | 18 +++++++++--------- hw/intc/arm_gicv3_common.c | 8 ++++++-- hw/intc/arm_gicv3_cpuif.c | 6 ++++++ hw/intc/arm_gicv3_kvm.c | 29 ++++++++++++++++++++++++++--- include/hw/arm/virt.h | 2 +- 5 files changed, 48 insertions(+), 15 deletions(-)