| Message ID | 20200917150044.23159-10-ani@anisinha.ca (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | i440fx/acpi: addition of feature and bug fixes. | expand |
On Thu, 17 Sep 2020 20:30:41 +0530 Ani Sinha <ani@anisinha.ca> wrote: > When acpi hotplug is turned off for both root pci bus as well as for pci > bridges, we should not generate the related ACPI code for DSDT table or > initialize related hw ports or reserve hw resources. This change makes > sure all those operations are turned off in the case ACPI pci hotplug is > off globally. > > In this change, we also make sure ACPI code for the PCNT method are only > added when bsel is enabled for the corresponding pci bus or bridge hotplug > is turned on. > > As q35 machines do not use bsel for it's pci buses at this point in time, this > change affects DSDT acpi table for q35 machines as well. Therefore, we will > also need to commit the updated golden master DSDT table acpi binary blobs as > well. Follwoing is the list of blobs which needs updating: > > tests/data/acpi/q35/DSDT > tests/data/acpi/q35/DSDT.acpihmat > tests/data/acpi/q35/DSDT.bridge > tests/data/acpi/q35/DSDT.cphp > tests/data/acpi/q35/DSDT.dimmpxm > tests/data/acpi/q35/DSDT.ipmibt > tests/data/acpi/q35/DSDT.memhp > tests/data/acpi/q35/DSDT.mmio64 > tests/data/acpi/q35/DSDT.numamem > tests/data/acpi/q35/DSDT.tis > > These tables are updated in the following commit. Without the updated table > blobs, the unit tests would fail with this patch. adding this to commit description doesn't help, 'make check' still fails if we apply patches till this point. which leads to broken bisection. I'm curious, what is not clear in process description at the start of tests/qtest/bios-tables-test.c. You did that for new tests, but so some reason you are avoiding to follow the same rules with this patch. > Signed-off-by: Ani Sinha <ani@anisinha.ca> > --- > hw/acpi/piix4.c | 6 ++++-- > hw/i386/acpi-build.c | 25 ++++++++++++++++++------- > 2 files changed, 22 insertions(+), 9 deletions(-) > > diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c > index e6163bb6ce..b70b1f98af 100644 > --- a/hw/acpi/piix4.c > +++ b/hw/acpi/piix4.c > @@ -596,8 +596,10 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, > "acpi-gpe0", GPE_LEN); > memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe); > > - acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, > - s->use_acpi_hotplug_bridge); > + if (s->use_acpi_hotplug_bridge || s->use_acpi_root_pci_hotplug) { > + acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, > + s->use_acpi_hotplug_bridge); > + } > > s->cpu_hotplug_legacy = true; > object_property_add_bool(OBJECT(s), "cpu-hotplug-legacy", > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c > index e079b686f5..e41bb0992b 100644 > --- a/hw/i386/acpi-build.c > +++ b/hw/i386/acpi-build.c > @@ -95,6 +95,7 @@ typedef struct AcpiPmInfo { > bool s3_disabled; > bool s4_disabled; > bool pcihp_bridge_en; > + bool pcihp_root_en; > uint8_t s4_val; > AcpiFadtData fadt; > uint16_t cpu_hp_io_base; > @@ -245,6 +246,9 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) > pm->pcihp_bridge_en = > object_property_get_bool(obj, "acpi-pci-hotplug-with-bridge-support", > NULL); > + pm->pcihp_root_en = > + object_property_get_bool(obj, "acpi-root-pci-hotplug", > + NULL); > } > > static void acpi_get_misc_info(AcpiMiscInfo *info) > @@ -450,10 +454,12 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, > } > > /* Append PCNT method to notify about events on local and child buses. > - * Add unconditionally for root since DSDT expects it. > + * Add this method for root bus only when hotplug is enabled since DSDT > + * expects it. > */ > - method = aml_method("PCNT", 0, AML_NOTSERIALIZED); > - > + if (bsel || pcihp_bridge_en) { > + method = aml_method("PCNT", 0, AML_NOTSERIALIZED); > + } > /* If bus supports hotplug select it and notify about local events */ > if (bsel) { > uint64_t bsel_val = qnum_get_uint(qobject_to(QNum, bsel)); > @@ -479,7 +485,10 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, > aml_append(method, aml_name("^S%.02X.PCNT", devfn)); > } > } > - aml_append(parent_scope, method); > + > + if (bsel || pcihp_bridge_en) { > + aml_append(parent_scope, method); > + } > qobject_unref(bsel); > } > > @@ -1504,7 +1513,9 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > build_hpet_aml(dsdt); > build_piix4_isa_bridge(dsdt); > build_isa_devices_aml(dsdt); > - build_piix4_pci_hotplug(dsdt); > + if (pm->pcihp_bridge_en || pm->pcihp_root_en) { > + build_piix4_pci_hotplug(dsdt); > + } > build_piix4_pci0_int(dsdt); > } else { > sb_scope = aml_scope("_SB"); > @@ -1546,7 +1557,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > { > aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006"))); > > - if (misc->is_piix4) { > + if (misc->is_piix4 && (pm->pcihp_bridge_en || pm->pcihp_root_en)) { > method = aml_method("_E01", 0, AML_NOTSERIALIZED); > aml_append(method, > aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF)); > @@ -1698,7 +1709,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > crs_range_set_free(&crs_range_set); > > /* reserve PCIHP resources */ > - if (pm->pcihp_io_len) { > + if (pm->pcihp_io_len && (pm->pcihp_bridge_en || pm->pcihp_root_en)) { > dev = aml_device("PHPR"); > aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A06"))); > aml_append(dev,
On Fri, Sep 18, 2020 at 11:54 AM Igor Mammedov <imammedo@redhat.com> wrote: > > On Thu, 17 Sep 2020 20:30:41 +0530 > Ani Sinha <ani@anisinha.ca> wrote: > > > When acpi hotplug is turned off for both root pci bus as well as for pci > > bridges, we should not generate the related ACPI code for DSDT table or > > initialize related hw ports or reserve hw resources. This change makes > > sure all those operations are turned off in the case ACPI pci hotplug is > > off globally. > > > > In this change, we also make sure ACPI code for the PCNT method are only > > added when bsel is enabled for the corresponding pci bus or bridge hotplug > > is turned on. > > > > As q35 machines do not use bsel for it's pci buses at this point in time, this > > change affects DSDT acpi table for q35 machines as well. Therefore, we will > > also need to commit the updated golden master DSDT table acpi binary blobs as > > well. Follwoing is the list of blobs which needs updating: > > > > tests/data/acpi/q35/DSDT > > tests/data/acpi/q35/DSDT.acpihmat > > tests/data/acpi/q35/DSDT.bridge > > tests/data/acpi/q35/DSDT.cphp > > tests/data/acpi/q35/DSDT.dimmpxm > > tests/data/acpi/q35/DSDT.ipmibt > > tests/data/acpi/q35/DSDT.memhp > > tests/data/acpi/q35/DSDT.mmio64 > > tests/data/acpi/q35/DSDT.numamem > > tests/data/acpi/q35/DSDT.tis > > > > These tables are updated in the following commit. Without the updated table > > blobs, the unit tests would fail with this patch. > > adding this to commit description doesn't help, > 'make check' still fails if we apply patches till this point. > which leads to broken bisection. > > I'm curious, what is not clear in process description at > the start of tests/qtest/bios-tables-test.c. > You did that for new tests, but so some reason you are avoiding > to follow the same rules with this patch. Yes because I assumed the instructions were for tests only not for patches which modify tables. It starts with the lines: " How to add or update the tests:" > > > > Signed-off-by: Ani Sinha <ani@anisinha.ca> > > --- > > hw/acpi/piix4.c | 6 ++++-- > > hw/i386/acpi-build.c | 25 ++++++++++++++++++------- > > 2 files changed, 22 insertions(+), 9 deletions(-) > > > > diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c > > index e6163bb6ce..b70b1f98af 100644 > > --- a/hw/acpi/piix4.c > > +++ b/hw/acpi/piix4.c > > @@ -596,8 +596,10 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, > > "acpi-gpe0", GPE_LEN); > > memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe); > > > > - acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, > > - s->use_acpi_hotplug_bridge); > > + if (s->use_acpi_hotplug_bridge || s->use_acpi_root_pci_hotplug) { > > + acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, > > + s->use_acpi_hotplug_bridge); > > + } > > > > s->cpu_hotplug_legacy = true; > > object_property_add_bool(OBJECT(s), "cpu-hotplug-legacy", > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c > > index e079b686f5..e41bb0992b 100644 > > --- a/hw/i386/acpi-build.c > > +++ b/hw/i386/acpi-build.c > > @@ -95,6 +95,7 @@ typedef struct AcpiPmInfo { > > bool s3_disabled; > > bool s4_disabled; > > bool pcihp_bridge_en; > > + bool pcihp_root_en; > > uint8_t s4_val; > > AcpiFadtData fadt; > > uint16_t cpu_hp_io_base; > > @@ -245,6 +246,9 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) > > pm->pcihp_bridge_en = > > object_property_get_bool(obj, "acpi-pci-hotplug-with-bridge-support", > > NULL); > > + pm->pcihp_root_en = > > + object_property_get_bool(obj, "acpi-root-pci-hotplug", > > + NULL); > > } > > > > static void acpi_get_misc_info(AcpiMiscInfo *info) > > @@ -450,10 +454,12 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, > > } > > > > /* Append PCNT method to notify about events on local and child buses. > > - * Add unconditionally for root since DSDT expects it. > > + * Add this method for root bus only when hotplug is enabled since DSDT > > + * expects it. > > */ > > - method = aml_method("PCNT", 0, AML_NOTSERIALIZED); > > - > > + if (bsel || pcihp_bridge_en) { > > + method = aml_method("PCNT", 0, AML_NOTSERIALIZED); > > + } > > /* If bus supports hotplug select it and notify about local events */ > > if (bsel) { > > uint64_t bsel_val = qnum_get_uint(qobject_to(QNum, bsel)); > > @@ -479,7 +485,10 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, > > aml_append(method, aml_name("^S%.02X.PCNT", devfn)); > > } > > } > > - aml_append(parent_scope, method); > > + > > + if (bsel || pcihp_bridge_en) { > > + aml_append(parent_scope, method); > > + } > > qobject_unref(bsel); > > } > > > > @@ -1504,7 +1513,9 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > build_hpet_aml(dsdt); > > build_piix4_isa_bridge(dsdt); > > build_isa_devices_aml(dsdt); > > - build_piix4_pci_hotplug(dsdt); > > + if (pm->pcihp_bridge_en || pm->pcihp_root_en) { > > + build_piix4_pci_hotplug(dsdt); > > + } > > build_piix4_pci0_int(dsdt); > > } else { > > sb_scope = aml_scope("_SB"); > > @@ -1546,7 +1557,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > { > > aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006"))); > > > > - if (misc->is_piix4) { > > + if (misc->is_piix4 && (pm->pcihp_bridge_en || pm->pcihp_root_en)) { > > method = aml_method("_E01", 0, AML_NOTSERIALIZED); > > aml_append(method, > > aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF)); > > @@ -1698,7 +1709,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > crs_range_set_free(&crs_range_set); > > > > /* reserve PCIHP resources */ > > - if (pm->pcihp_io_len) { > > + if (pm->pcihp_io_len && (pm->pcihp_bridge_en || pm->pcihp_root_en)) { > > dev = aml_device("PHPR"); > > aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A06"))); > > aml_append(dev, >
On Fri, 18 Sep 2020 12:06:26 +0530 Ani Sinha <ani@anisinha.ca> wrote: > On Fri, Sep 18, 2020 at 11:54 AM Igor Mammedov <imammedo@redhat.com> wrote: > > > > On Thu, 17 Sep 2020 20:30:41 +0530 > > Ani Sinha <ani@anisinha.ca> wrote: > > > > > When acpi hotplug is turned off for both root pci bus as well as for pci > > > bridges, we should not generate the related ACPI code for DSDT table or > > > initialize related hw ports or reserve hw resources. This change makes > > > sure all those operations are turned off in the case ACPI pci hotplug is > > > off globally. > > > > > > In this change, we also make sure ACPI code for the PCNT method are only > > > added when bsel is enabled for the corresponding pci bus or bridge hotplug > > > is turned on. > > > > > > As q35 machines do not use bsel for it's pci buses at this point in time, this > > > change affects DSDT acpi table for q35 machines as well. Therefore, we will > > > also need to commit the updated golden master DSDT table acpi binary blobs as > > > well. Follwoing is the list of blobs which needs updating: > > > > > > tests/data/acpi/q35/DSDT > > > tests/data/acpi/q35/DSDT.acpihmat > > > tests/data/acpi/q35/DSDT.bridge > > > tests/data/acpi/q35/DSDT.cphp > > > tests/data/acpi/q35/DSDT.dimmpxm > > > tests/data/acpi/q35/DSDT.ipmibt > > > tests/data/acpi/q35/DSDT.memhp > > > tests/data/acpi/q35/DSDT.mmio64 > > > tests/data/acpi/q35/DSDT.numamem > > > tests/data/acpi/q35/DSDT.tis > > > > > > These tables are updated in the following commit. Without the updated table > > > blobs, the unit tests would fail with this patch. > > > > adding this to commit description doesn't help, > > 'make check' still fails if we apply patches till this point. > > which leads to broken bisection. > > > > I'm curious, what is not clear in process description at > > the start of tests/qtest/bios-tables-test.c. > > You did that for new tests, but so some reason you are avoiding > > to follow the same rules with this patch. > > Yes because I assumed the instructions were for tests only not for > patches which modify tables. It starts with the lines: > " How to add or update the tests:" any change to ACPI tables, that breaks test[s], leads to updating relevant blobs and you point out in commit message that it does break q35 tests. " * How to add or update the tests: * Contributor: * 1. add empty files for new tables, if any, under tests/data/acpi * 2. list any changed files in tests/qtest/bios-tables-test-allowed-diff.h * 3. commit the above *before* making changes that affect the tables " Above is pretty clear to me, but if you can improve it feel free to post a patch clarifying process. > > > > > > > Signed-off-by: Ani Sinha <ani@anisinha.ca> > > > --- > > > hw/acpi/piix4.c | 6 ++++-- > > > hw/i386/acpi-build.c | 25 ++++++++++++++++++------- > > > 2 files changed, 22 insertions(+), 9 deletions(-) > > > > > > diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c > > > index e6163bb6ce..b70b1f98af 100644 > > > --- a/hw/acpi/piix4.c > > > +++ b/hw/acpi/piix4.c > > > @@ -596,8 +596,10 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, > > > "acpi-gpe0", GPE_LEN); > > > memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe); > > > > > > - acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, > > > - s->use_acpi_hotplug_bridge); > > > + if (s->use_acpi_hotplug_bridge || s->use_acpi_root_pci_hotplug) { > > > + acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, > > > + s->use_acpi_hotplug_bridge); > > > + } > > > > > > s->cpu_hotplug_legacy = true; > > > object_property_add_bool(OBJECT(s), "cpu-hotplug-legacy", > > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c > > > index e079b686f5..e41bb0992b 100644 > > > --- a/hw/i386/acpi-build.c > > > +++ b/hw/i386/acpi-build.c > > > @@ -95,6 +95,7 @@ typedef struct AcpiPmInfo { > > > bool s3_disabled; > > > bool s4_disabled; > > > bool pcihp_bridge_en; > > > + bool pcihp_root_en; > > > uint8_t s4_val; > > > AcpiFadtData fadt; > > > uint16_t cpu_hp_io_base; > > > @@ -245,6 +246,9 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) > > > pm->pcihp_bridge_en = > > > object_property_get_bool(obj, "acpi-pci-hotplug-with-bridge-support", > > > NULL); > > > + pm->pcihp_root_en = > > > + object_property_get_bool(obj, "acpi-root-pci-hotplug", > > > + NULL); > > > } > > > > > > static void acpi_get_misc_info(AcpiMiscInfo *info) > > > @@ -450,10 +454,12 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, > > > } > > > > > > /* Append PCNT method to notify about events on local and child buses. > > > - * Add unconditionally for root since DSDT expects it. > > > + * Add this method for root bus only when hotplug is enabled since DSDT > > > + * expects it. > > > */ > > > - method = aml_method("PCNT", 0, AML_NOTSERIALIZED); > > > - > > > + if (bsel || pcihp_bridge_en) { > > > + method = aml_method("PCNT", 0, AML_NOTSERIALIZED); > > > + } > > > /* If bus supports hotplug select it and notify about local events */ > > > if (bsel) { > > > uint64_t bsel_val = qnum_get_uint(qobject_to(QNum, bsel)); > > > @@ -479,7 +485,10 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, > > > aml_append(method, aml_name("^S%.02X.PCNT", devfn)); > > > } > > > } > > > - aml_append(parent_scope, method); > > > + > > > + if (bsel || pcihp_bridge_en) { > > > + aml_append(parent_scope, method); > > > + } > > > qobject_unref(bsel); > > > } > > > > > > @@ -1504,7 +1513,9 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > > build_hpet_aml(dsdt); > > > build_piix4_isa_bridge(dsdt); > > > build_isa_devices_aml(dsdt); > > > - build_piix4_pci_hotplug(dsdt); > > > + if (pm->pcihp_bridge_en || pm->pcihp_root_en) { > > > + build_piix4_pci_hotplug(dsdt); > > > + } > > > build_piix4_pci0_int(dsdt); > > > } else { > > > sb_scope = aml_scope("_SB"); > > > @@ -1546,7 +1557,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > > { > > > aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006"))); > > > > > > - if (misc->is_piix4) { > > > + if (misc->is_piix4 && (pm->pcihp_bridge_en || pm->pcihp_root_en)) { > > > method = aml_method("_E01", 0, AML_NOTSERIALIZED); > > > aml_append(method, > > > aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF)); > > > @@ -1698,7 +1709,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > > crs_range_set_free(&crs_range_set); > > > > > > /* reserve PCIHP resources */ > > > - if (pm->pcihp_io_len) { > > > + if (pm->pcihp_io_len && (pm->pcihp_bridge_en || pm->pcihp_root_en)) { > > > dev = aml_device("PHPR"); > > > aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A06"))); > > > aml_append(dev, > > >
On Fri, Sep 18, 2020 at 12:17 PM Igor Mammedov <imammedo@redhat.com> wrote: > > On Fri, 18 Sep 2020 12:06:26 +0530 > Ani Sinha <ani@anisinha.ca> wrote: > > > On Fri, Sep 18, 2020 at 11:54 AM Igor Mammedov <imammedo@redhat.com> wrote: > > > > > > On Thu, 17 Sep 2020 20:30:41 +0530 > > > Ani Sinha <ani@anisinha.ca> wrote: > > > > > > > When acpi hotplug is turned off for both root pci bus as well as for pci > > > > bridges, we should not generate the related ACPI code for DSDT table or > > > > initialize related hw ports or reserve hw resources. This change makes > > > > sure all those operations are turned off in the case ACPI pci hotplug is > > > > off globally. > > > > > > > > In this change, we also make sure ACPI code for the PCNT method are only > > > > added when bsel is enabled for the corresponding pci bus or bridge hotplug > > > > is turned on. > > > > > > > > As q35 machines do not use bsel for it's pci buses at this point in time, this > > > > change affects DSDT acpi table for q35 machines as well. Therefore, we will > > > > also need to commit the updated golden master DSDT table acpi binary blobs as > > > > well. Follwoing is the list of blobs which needs updating: > > > > > > > > tests/data/acpi/q35/DSDT > > > > tests/data/acpi/q35/DSDT.acpihmat > > > > tests/data/acpi/q35/DSDT.bridge > > > > tests/data/acpi/q35/DSDT.cphp > > > > tests/data/acpi/q35/DSDT.dimmpxm > > > > tests/data/acpi/q35/DSDT.ipmibt > > > > tests/data/acpi/q35/DSDT.memhp > > > > tests/data/acpi/q35/DSDT.mmio64 > > > > tests/data/acpi/q35/DSDT.numamem > > > > tests/data/acpi/q35/DSDT.tis > > > > > > > > These tables are updated in the following commit. Without the updated table > > > > blobs, the unit tests would fail with this patch. > > > > > > adding this to commit description doesn't help, > > > 'make check' still fails if we apply patches till this point. > > > which leads to broken bisection. > > > > > > I'm curious, what is not clear in process description at > > > the start of tests/qtest/bios-tables-test.c. > > > You did that for new tests, but so some reason you are avoiding > > > to follow the same rules with this patch. > > > > Yes because I assumed the instructions were for tests only not for > > patches which modify tables. It starts with the lines: > > " How to add or update the tests:" > > any change to ACPI tables, that breaks test[s], leads to > updating relevant blobs Yes this should be mentioned in the comment in that file as well. I will send a patch to that effect. It's not just about adding new tests or updating existing tests. and you point out in commit message > that it does break q35 tests. > > " > * How to add or update the tests: > * Contributor: > * 1. add empty files for new tables, if any, under tests/data/acpi > * 2. list any changed files in tests/qtest/bios-tables-test-allowed-diff.h > * 3. commit the above *before* making changes that affect the tables > " > > Above is pretty clear to me, but if you can improve it > feel free to post a patch clarifying process. > > > > > > > > > > > Signed-off-by: Ani Sinha <ani@anisinha.ca> > > > > --- > > > > hw/acpi/piix4.c | 6 ++++-- > > > > hw/i386/acpi-build.c | 25 ++++++++++++++++++------- > > > > 2 files changed, 22 insertions(+), 9 deletions(-) > > > > > > > > diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c > > > > index e6163bb6ce..b70b1f98af 100644 > > > > --- a/hw/acpi/piix4.c > > > > +++ b/hw/acpi/piix4.c > > > > @@ -596,8 +596,10 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, > > > > "acpi-gpe0", GPE_LEN); > > > > memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe); > > > > > > > > - acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, > > > > - s->use_acpi_hotplug_bridge); > > > > + if (s->use_acpi_hotplug_bridge || s->use_acpi_root_pci_hotplug) { > > > > + acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, > > > > + s->use_acpi_hotplug_bridge); > > > > + } > > > > > > > > s->cpu_hotplug_legacy = true; > > > > object_property_add_bool(OBJECT(s), "cpu-hotplug-legacy", > > > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c > > > > index e079b686f5..e41bb0992b 100644 > > > > --- a/hw/i386/acpi-build.c > > > > +++ b/hw/i386/acpi-build.c > > > > @@ -95,6 +95,7 @@ typedef struct AcpiPmInfo { > > > > bool s3_disabled; > > > > bool s4_disabled; > > > > bool pcihp_bridge_en; > > > > + bool pcihp_root_en; > > > > uint8_t s4_val; > > > > AcpiFadtData fadt; > > > > uint16_t cpu_hp_io_base; > > > > @@ -245,6 +246,9 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) > > > > pm->pcihp_bridge_en = > > > > object_property_get_bool(obj, "acpi-pci-hotplug-with-bridge-support", > > > > NULL); > > > > + pm->pcihp_root_en = > > > > + object_property_get_bool(obj, "acpi-root-pci-hotplug", > > > > + NULL); > > > > } > > > > > > > > static void acpi_get_misc_info(AcpiMiscInfo *info) > > > > @@ -450,10 +454,12 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, > > > > } > > > > > > > > /* Append PCNT method to notify about events on local and child buses. > > > > - * Add unconditionally for root since DSDT expects it. > > > > + * Add this method for root bus only when hotplug is enabled since DSDT > > > > + * expects it. > > > > */ > > > > - method = aml_method("PCNT", 0, AML_NOTSERIALIZED); > > > > - > > > > + if (bsel || pcihp_bridge_en) { > > > > + method = aml_method("PCNT", 0, AML_NOTSERIALIZED); > > > > + } > > > > /* If bus supports hotplug select it and notify about local events */ > > > > if (bsel) { > > > > uint64_t bsel_val = qnum_get_uint(qobject_to(QNum, bsel)); > > > > @@ -479,7 +485,10 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, > > > > aml_append(method, aml_name("^S%.02X.PCNT", devfn)); > > > > } > > > > } > > > > - aml_append(parent_scope, method); > > > > + > > > > + if (bsel || pcihp_bridge_en) { > > > > + aml_append(parent_scope, method); > > > > + } > > > > qobject_unref(bsel); > > > > } > > > > > > > > @@ -1504,7 +1513,9 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > > > build_hpet_aml(dsdt); > > > > build_piix4_isa_bridge(dsdt); > > > > build_isa_devices_aml(dsdt); > > > > - build_piix4_pci_hotplug(dsdt); > > > > + if (pm->pcihp_bridge_en || pm->pcihp_root_en) { > > > > + build_piix4_pci_hotplug(dsdt); > > > > + } > > > > build_piix4_pci0_int(dsdt); > > > > } else { > > > > sb_scope = aml_scope("_SB"); > > > > @@ -1546,7 +1557,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > > > { > > > > aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006"))); > > > > > > > > - if (misc->is_piix4) { > > > > + if (misc->is_piix4 && (pm->pcihp_bridge_en || pm->pcihp_root_en)) { > > > > method = aml_method("_E01", 0, AML_NOTSERIALIZED); > > > > aml_append(method, > > > > aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF)); > > > > @@ -1698,7 +1709,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > > > crs_range_set_free(&crs_range_set); > > > > > > > > /* reserve PCIHP resources */ > > > > - if (pm->pcihp_io_len) { > > > > + if (pm->pcihp_io_len && (pm->pcihp_bridge_en || pm->pcihp_root_en)) { > > > > dev = aml_device("PHPR"); > > > > aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A06"))); > > > > aml_append(dev, > > > > > >
diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c index e6163bb6ce..b70b1f98af 100644 --- a/hw/acpi/piix4.c +++ b/hw/acpi/piix4.c @@ -596,8 +596,10 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, "acpi-gpe0", GPE_LEN); memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe); - acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, - s->use_acpi_hotplug_bridge); + if (s->use_acpi_hotplug_bridge || s->use_acpi_root_pci_hotplug) { + acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, + s->use_acpi_hotplug_bridge); + } s->cpu_hotplug_legacy = true; object_property_add_bool(OBJECT(s), "cpu-hotplug-legacy", diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index e079b686f5..e41bb0992b 100644 --- a/hw/i386/acpi-build.c +++ b/hw/i386/acpi-build.c @@ -95,6 +95,7 @@ typedef struct AcpiPmInfo { bool s3_disabled; bool s4_disabled; bool pcihp_bridge_en; + bool pcihp_root_en; uint8_t s4_val; AcpiFadtData fadt; uint16_t cpu_hp_io_base; @@ -245,6 +246,9 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) pm->pcihp_bridge_en = object_property_get_bool(obj, "acpi-pci-hotplug-with-bridge-support", NULL); + pm->pcihp_root_en = + object_property_get_bool(obj, "acpi-root-pci-hotplug", + NULL); } static void acpi_get_misc_info(AcpiMiscInfo *info) @@ -450,10 +454,12 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, } /* Append PCNT method to notify about events on local and child buses. - * Add unconditionally for root since DSDT expects it. + * Add this method for root bus only when hotplug is enabled since DSDT + * expects it. */ - method = aml_method("PCNT", 0, AML_NOTSERIALIZED); - + if (bsel || pcihp_bridge_en) { + method = aml_method("PCNT", 0, AML_NOTSERIALIZED); + } /* If bus supports hotplug select it and notify about local events */ if (bsel) { uint64_t bsel_val = qnum_get_uint(qobject_to(QNum, bsel)); @@ -479,7 +485,10 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, aml_append(method, aml_name("^S%.02X.PCNT", devfn)); } } - aml_append(parent_scope, method); + + if (bsel || pcihp_bridge_en) { + aml_append(parent_scope, method); + } qobject_unref(bsel); } @@ -1504,7 +1513,9 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, build_hpet_aml(dsdt); build_piix4_isa_bridge(dsdt); build_isa_devices_aml(dsdt); - build_piix4_pci_hotplug(dsdt); + if (pm->pcihp_bridge_en || pm->pcihp_root_en) { + build_piix4_pci_hotplug(dsdt); + } build_piix4_pci0_int(dsdt); } else { sb_scope = aml_scope("_SB"); @@ -1546,7 +1557,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, { aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006"))); - if (misc->is_piix4) { + if (misc->is_piix4 && (pm->pcihp_bridge_en || pm->pcihp_root_en)) { method = aml_method("_E01", 0, AML_NOTSERIALIZED); aml_append(method, aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF)); @@ -1698,7 +1709,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, crs_range_set_free(&crs_range_set); /* reserve PCIHP resources */ - if (pm->pcihp_io_len) { + if (pm->pcihp_io_len && (pm->pcihp_bridge_en || pm->pcihp_root_en)) { dev = aml_device("PHPR"); aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A06"))); aml_append(dev,
When acpi hotplug is turned off for both root pci bus as well as for pci bridges, we should not generate the related ACPI code for DSDT table or initialize related hw ports or reserve hw resources. This change makes sure all those operations are turned off in the case ACPI pci hotplug is off globally. In this change, we also make sure ACPI code for the PCNT method are only added when bsel is enabled for the corresponding pci bus or bridge hotplug is turned on. As q35 machines do not use bsel for it's pci buses at this point in time, this change affects DSDT acpi table for q35 machines as well. Therefore, we will also need to commit the updated golden master DSDT table acpi binary blobs as well. Follwoing is the list of blobs which needs updating: tests/data/acpi/q35/DSDT tests/data/acpi/q35/DSDT.acpihmat tests/data/acpi/q35/DSDT.bridge tests/data/acpi/q35/DSDT.cphp tests/data/acpi/q35/DSDT.dimmpxm tests/data/acpi/q35/DSDT.ipmibt tests/data/acpi/q35/DSDT.memhp tests/data/acpi/q35/DSDT.mmio64 tests/data/acpi/q35/DSDT.numamem tests/data/acpi/q35/DSDT.tis These tables are updated in the following commit. Without the updated table blobs, the unit tests would fail with this patch. Signed-off-by: Ani Sinha <ani@anisinha.ca> --- hw/acpi/piix4.c | 6 ++++-- hw/i386/acpi-build.c | 25 ++++++++++++++++++------- 2 files changed, 22 insertions(+), 9 deletions(-)