| Message ID | 20201117193448.393472-1-sw@weilnetz.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [for-5.2] docs: Fix some typos (found by codespell) | expand |
On Tue, Nov 17, 2020 at 08:34:48PM +0100, Stefan Weil wrote: > Fix also a similar typo in a code comment. > > Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> > --- > docs/can.txt | 8 ++++---- > docs/interop/vhost-user.rst | 2 +- > docs/replay.txt | 2 +- > docs/specs/ppc-spapr-numa.rst | 2 +- > docs/system/deprecated.rst | 4 ++-- > docs/tools/virtiofsd.rst | 2 +- > hw/vfio/igd.c | 2 +- > 7 files changed, 11 insertions(+), 11 deletions(-) > > diff --git a/docs/can.txt b/docs/can.txt > index 5838f6620c..0d310237df 100644 > --- a/docs/can.txt > +++ b/docs/can.txt > @@ -19,7 +19,7 @@ interface to implement because such device can be easily connected > to systems with different CPU architectures (x86, PowerPC, Arm, etc.). > > In 2020, CTU CAN FD controller model has been added as part > -of the bachelor theses of Jan Charvat. This controller is complete > +of the bachelor thesis of Jan Charvat. This controller is complete > open-source/design/hardware solution. The core designer > of the project is Ondrej Ille, the financial support has been > provided by CTU, and more companies including Volkswagen subsidiaries. > @@ -31,7 +31,7 @@ testing lead to goal change to provide environment which provides complete > emulated environment for testing and RTEMS GSoC slot has been donated > to work on CAN hardware emulation on QEMU. > > -Examples how to use CAN emulation for SJA1000 based borads > +Examples how to use CAN emulation for SJA1000 based boards > ========================================================== > > When QEMU with CAN PCI support is compiled then one of the next > @@ -106,8 +106,8 @@ This open-source core provides CAN FD support. CAN FD drames are > delivered even to the host systems when SocketCAN interface is found > CAN FD capable. > > -The PCIe borad emulation is provided for now (the device identifier is > -ctucan_pci). The defauld build defines two CTU CAN FD cores > +The PCIe board emulation is provided for now (the device identifier is > +ctucan_pci). The default build defines two CTU CAN FD cores > on the board. > > Example how to connect the canbus0-bus (virtual wire) to the host > diff --git a/docs/interop/vhost-user.rst b/docs/interop/vhost-user.rst > index 988f154144..72b2e8c7ba 100644 > --- a/docs/interop/vhost-user.rst > +++ b/docs/interop/vhost-user.rst > @@ -513,7 +513,7 @@ descriptor table (split virtqueue) or descriptor ring (packed > virtqueue). However, it can't work when we process descriptors > out-of-order because some entries which store the information of > inflight descriptors in available ring (split virtqueue) or descriptor > -ring (packed virtqueue) might be overrided by new entries. To solve > +ring (packed virtqueue) might be overridden by new entries. To solve > this problem, slave need to allocate an extra buffer to store this > information of inflight descriptors and share it with master for > persistent. ``VHOST_USER_GET_INFLIGHT_FD`` and > diff --git a/docs/replay.txt b/docs/replay.txt > index 87a64ae068..5b008ca491 100644 > --- a/docs/replay.txt > +++ b/docs/replay.txt > @@ -328,7 +328,7 @@ between the snapshots. Each of the passes include the following steps: > 1. loading the snapshot > 2. replaying to examine the breakpoints > 3. if breakpoint or watchpoint was met > - - loading the snaphot again > + - loading the snapshot again > - replaying to the required breakpoint > 4. else > - proceeding to the p.1 with the earlier snapshot > diff --git a/docs/specs/ppc-spapr-numa.rst b/docs/specs/ppc-spapr-numa.rst > index 5fca2bdd8e..ffa687dc89 100644 > --- a/docs/specs/ppc-spapr-numa.rst > +++ b/docs/specs/ppc-spapr-numa.rst > @@ -198,7 +198,7 @@ This is how it is being done: > * user distance 121 and beyond will be interpreted as 160 > * user distance 10 stays 10 > > -The reasoning behind this aproximation is to avoid any round up to the local > +The reasoning behind this approximation is to avoid any round up to the local > distance (10), keeping it exclusive to the 4th NUMA level (which is still > exclusive to the node_id). All other ranges were chosen under the developer > discretion of what would be (somewhat) sensible considering the user input. > diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst > index 32a0e620db..63e9db1463 100644 > --- a/docs/system/deprecated.rst > +++ b/docs/system/deprecated.rst > @@ -465,7 +465,7 @@ default configuration. > > The CPU model runnability guarantee won't apply anymore to > existing CPU models. Management software that needs runnability > -guarantees must resolve the CPU model aliases using te > +guarantees must resolve the CPU model aliases using the > ``alias-of`` field returned by the ``query-cpu-definitions`` QMP > command. > > @@ -637,7 +637,7 @@ Splitting RAM by default between NUMA nodes had the same issues as ``mem`` > parameter with the difference that the role of the user plays QEMU using > implicit generic or board specific splitting rule. > Use ``memdev`` with *memory-backend-ram* backend or ``mem`` (if > -it's supported by used machine type) to define mapping explictly instead. > +it's supported by used machine type) to define mapping explicitly instead. > Users of existing VMs, wishing to preserve the same RAM distribution, should > configure it explicitly using ``-numa node,memdev`` options. Current RAM > distribution can be retrieved using HMP command ``info numa`` and if separate > diff --git a/docs/tools/virtiofsd.rst b/docs/tools/virtiofsd.rst > index 34a9e40146..866b7db3ee 100644 > --- a/docs/tools/virtiofsd.rst > +++ b/docs/tools/virtiofsd.rst > @@ -174,7 +174,7 @@ Using ':' as the separator a rule is of the form: > - 'bad' - If a client tries to use a name matching 'key' it's > denied using EPERM; when the server passes an attribute > name matching 'prepend' it's hidden. In many ways it's use is very like > - 'ok' as either an explict terminator or for special handling of certain > + 'ok' as either an explicit terminator or for special handling of certain > patterns. > > **key** is a string tested as a prefix on an attribute name originating > diff --git a/hw/vfio/igd.c b/hw/vfio/igd.c > index 64e332746b..470205f487 100644 > --- a/hw/vfio/igd.c > +++ b/hw/vfio/igd.c > @@ -535,7 +535,7 @@ void vfio_probe_igd_bar4_quirk(VFIOPCIDevice *vdev, int nr) > } > > /* > - * Assume we have no GMS memory, but allow it to be overrided by device > + * Assume we have no GMS memory, but allow it to be overridden by device > * option (experimental). The spec doesn't actually allow zero GMS when > * when IVD (IGD VGA Disable) is clear, but the claim is that it's unused, > * so let's not waste VM memory for it. > -- > 2.29.2
On 17/11/20 20:34, Stefan Weil wrote: > Fix also a similar typo in a code comment. > > Signed-off-by: Stefan Weil <sw@weilnetz.de> > --- > docs/can.txt | 8 ++++---- > docs/interop/vhost-user.rst | 2 +- > docs/replay.txt | 2 +- > docs/specs/ppc-spapr-numa.rst | 2 +- > docs/system/deprecated.rst | 4 ++-- > docs/tools/virtiofsd.rst | 2 +- > hw/vfio/igd.c | 2 +- > 7 files changed, 11 insertions(+), 11 deletions(-) > > diff --git a/docs/can.txt b/docs/can.txt > index 5838f6620c..0d310237df 100644 > --- a/docs/can.txt > +++ b/docs/can.txt > @@ -19,7 +19,7 @@ interface to implement because such device can be easily connected > to systems with different CPU architectures (x86, PowerPC, Arm, etc.). > > In 2020, CTU CAN FD controller model has been added as part > -of the bachelor theses of Jan Charvat. This controller is complete > +of the bachelor thesis of Jan Charvat. This controller is complete > open-source/design/hardware solution. The core designer > of the project is Ondrej Ille, the financial support has been > provided by CTU, and more companies including Volkswagen subsidiaries. > @@ -31,7 +31,7 @@ testing lead to goal change to provide environment which provides complete > emulated environment for testing and RTEMS GSoC slot has been donated > to work on CAN hardware emulation on QEMU. > > -Examples how to use CAN emulation for SJA1000 based borads > +Examples how to use CAN emulation for SJA1000 based boards > ========================================================== > > When QEMU with CAN PCI support is compiled then one of the next > @@ -106,8 +106,8 @@ This open-source core provides CAN FD support. CAN FD drames are > delivered even to the host systems when SocketCAN interface is found > CAN FD capable. > > -The PCIe borad emulation is provided for now (the device identifier is > -ctucan_pci). The defauld build defines two CTU CAN FD cores > +The PCIe board emulation is provided for now (the device identifier is > +ctucan_pci). The default build defines two CTU CAN FD cores > on the board. > > Example how to connect the canbus0-bus (virtual wire) to the host > diff --git a/docs/interop/vhost-user.rst b/docs/interop/vhost-user.rst > index 988f154144..72b2e8c7ba 100644 > --- a/docs/interop/vhost-user.rst > +++ b/docs/interop/vhost-user.rst > @@ -513,7 +513,7 @@ descriptor table (split virtqueue) or descriptor ring (packed > virtqueue). However, it can't work when we process descriptors > out-of-order because some entries which store the information of > inflight descriptors in available ring (split virtqueue) or descriptor > -ring (packed virtqueue) might be overrided by new entries. To solve > +ring (packed virtqueue) might be overridden by new entries. To solve > this problem, slave need to allocate an extra buffer to store this > information of inflight descriptors and share it with master for > persistent. ``VHOST_USER_GET_INFLIGHT_FD`` and > diff --git a/docs/replay.txt b/docs/replay.txt > index 87a64ae068..5b008ca491 100644 > --- a/docs/replay.txt > +++ b/docs/replay.txt > @@ -328,7 +328,7 @@ between the snapshots. Each of the passes include the following steps: > 1. loading the snapshot > 2. replaying to examine the breakpoints > 3. if breakpoint or watchpoint was met > - - loading the snaphot again > + - loading the snapshot again > - replaying to the required breakpoint > 4. else > - proceeding to the p.1 with the earlier snapshot > diff --git a/docs/specs/ppc-spapr-numa.rst b/docs/specs/ppc-spapr-numa.rst > index 5fca2bdd8e..ffa687dc89 100644 > --- a/docs/specs/ppc-spapr-numa.rst > +++ b/docs/specs/ppc-spapr-numa.rst > @@ -198,7 +198,7 @@ This is how it is being done: > * user distance 121 and beyond will be interpreted as 160 > * user distance 10 stays 10 > > -The reasoning behind this aproximation is to avoid any round up to the local > +The reasoning behind this approximation is to avoid any round up to the local > distance (10), keeping it exclusive to the 4th NUMA level (which is still > exclusive to the node_id). All other ranges were chosen under the developer > discretion of what would be (somewhat) sensible considering the user input. > diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst > index 32a0e620db..63e9db1463 100644 > --- a/docs/system/deprecated.rst > +++ b/docs/system/deprecated.rst > @@ -465,7 +465,7 @@ default configuration. > > The CPU model runnability guarantee won't apply anymore to > existing CPU models. Management software that needs runnability > -guarantees must resolve the CPU model aliases using te > +guarantees must resolve the CPU model aliases using the > ``alias-of`` field returned by the ``query-cpu-definitions`` QMP > command. > > @@ -637,7 +637,7 @@ Splitting RAM by default between NUMA nodes had the same issues as ``mem`` > parameter with the difference that the role of the user plays QEMU using > implicit generic or board specific splitting rule. > Use ``memdev`` with *memory-backend-ram* backend or ``mem`` (if > -it's supported by used machine type) to define mapping explictly instead. > +it's supported by used machine type) to define mapping explicitly instead. > Users of existing VMs, wishing to preserve the same RAM distribution, should > configure it explicitly using ``-numa node,memdev`` options. Current RAM > distribution can be retrieved using HMP command ``info numa`` and if separate > diff --git a/docs/tools/virtiofsd.rst b/docs/tools/virtiofsd.rst > index 34a9e40146..866b7db3ee 100644 > --- a/docs/tools/virtiofsd.rst > +++ b/docs/tools/virtiofsd.rst > @@ -174,7 +174,7 @@ Using ':' as the separator a rule is of the form: > - 'bad' - If a client tries to use a name matching 'key' it's > denied using EPERM; when the server passes an attribute > name matching 'prepend' it's hidden. In many ways it's use is very like > - 'ok' as either an explict terminator or for special handling of certain > + 'ok' as either an explicit terminator or for special handling of certain > patterns. > > **key** is a string tested as a prefix on an attribute name originating > diff --git a/hw/vfio/igd.c b/hw/vfio/igd.c > index 64e332746b..470205f487 100644 > --- a/hw/vfio/igd.c > +++ b/hw/vfio/igd.c > @@ -535,7 +535,7 @@ void vfio_probe_igd_bar4_quirk(VFIOPCIDevice *vdev, int nr) > } > > /* > - * Assume we have no GMS memory, but allow it to be overrided by device > + * Assume we have no GMS memory, but allow it to be overridden by device > * option (experimental). The spec doesn't actually allow zero GMS when > * when IVD (IGD VGA Disable) is clear, but the claim is that it's unused, > * so let's not waste VM memory for it. > Queued, thanks. Paolo
diff --git a/docs/can.txt b/docs/can.txt index 5838f6620c..0d310237df 100644 --- a/docs/can.txt +++ b/docs/can.txt @@ -19,7 +19,7 @@ interface to implement because such device can be easily connected to systems with different CPU architectures (x86, PowerPC, Arm, etc.). In 2020, CTU CAN FD controller model has been added as part -of the bachelor theses of Jan Charvat. This controller is complete +of the bachelor thesis of Jan Charvat. This controller is complete open-source/design/hardware solution. The core designer of the project is Ondrej Ille, the financial support has been provided by CTU, and more companies including Volkswagen subsidiaries. @@ -31,7 +31,7 @@ testing lead to goal change to provide environment which provides complete emulated environment for testing and RTEMS GSoC slot has been donated to work on CAN hardware emulation on QEMU. -Examples how to use CAN emulation for SJA1000 based borads +Examples how to use CAN emulation for SJA1000 based boards ========================================================== When QEMU with CAN PCI support is compiled then one of the next @@ -106,8 +106,8 @@ This open-source core provides CAN FD support. CAN FD drames are delivered even to the host systems when SocketCAN interface is found CAN FD capable. -The PCIe borad emulation is provided for now (the device identifier is -ctucan_pci). The defauld build defines two CTU CAN FD cores +The PCIe board emulation is provided for now (the device identifier is +ctucan_pci). The default build defines two CTU CAN FD cores on the board. Example how to connect the canbus0-bus (virtual wire) to the host diff --git a/docs/interop/vhost-user.rst b/docs/interop/vhost-user.rst index 988f154144..72b2e8c7ba 100644 --- a/docs/interop/vhost-user.rst +++ b/docs/interop/vhost-user.rst @@ -513,7 +513,7 @@ descriptor table (split virtqueue) or descriptor ring (packed virtqueue). However, it can't work when we process descriptors out-of-order because some entries which store the information of inflight descriptors in available ring (split virtqueue) or descriptor -ring (packed virtqueue) might be overrided by new entries. To solve +ring (packed virtqueue) might be overridden by new entries. To solve this problem, slave need to allocate an extra buffer to store this information of inflight descriptors and share it with master for persistent. ``VHOST_USER_GET_INFLIGHT_FD`` and diff --git a/docs/replay.txt b/docs/replay.txt index 87a64ae068..5b008ca491 100644 --- a/docs/replay.txt +++ b/docs/replay.txt @@ -328,7 +328,7 @@ between the snapshots. Each of the passes include the following steps: 1. loading the snapshot 2. replaying to examine the breakpoints 3. if breakpoint or watchpoint was met - - loading the snaphot again + - loading the snapshot again - replaying to the required breakpoint 4. else - proceeding to the p.1 with the earlier snapshot diff --git a/docs/specs/ppc-spapr-numa.rst b/docs/specs/ppc-spapr-numa.rst index 5fca2bdd8e..ffa687dc89 100644 --- a/docs/specs/ppc-spapr-numa.rst +++ b/docs/specs/ppc-spapr-numa.rst @@ -198,7 +198,7 @@ This is how it is being done: * user distance 121 and beyond will be interpreted as 160 * user distance 10 stays 10 -The reasoning behind this aproximation is to avoid any round up to the local +The reasoning behind this approximation is to avoid any round up to the local distance (10), keeping it exclusive to the 4th NUMA level (which is still exclusive to the node_id). All other ranges were chosen under the developer discretion of what would be (somewhat) sensible considering the user input. diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst index 32a0e620db..63e9db1463 100644 --- a/docs/system/deprecated.rst +++ b/docs/system/deprecated.rst @@ -465,7 +465,7 @@ default configuration. The CPU model runnability guarantee won't apply anymore to existing CPU models. Management software that needs runnability -guarantees must resolve the CPU model aliases using te +guarantees must resolve the CPU model aliases using the ``alias-of`` field returned by the ``query-cpu-definitions`` QMP command. @@ -637,7 +637,7 @@ Splitting RAM by default between NUMA nodes had the same issues as ``mem`` parameter with the difference that the role of the user plays QEMU using implicit generic or board specific splitting rule. Use ``memdev`` with *memory-backend-ram* backend or ``mem`` (if -it's supported by used machine type) to define mapping explictly instead. +it's supported by used machine type) to define mapping explicitly instead. Users of existing VMs, wishing to preserve the same RAM distribution, should configure it explicitly using ``-numa node,memdev`` options. Current RAM distribution can be retrieved using HMP command ``info numa`` and if separate diff --git a/docs/tools/virtiofsd.rst b/docs/tools/virtiofsd.rst index 34a9e40146..866b7db3ee 100644 --- a/docs/tools/virtiofsd.rst +++ b/docs/tools/virtiofsd.rst @@ -174,7 +174,7 @@ Using ':' as the separator a rule is of the form: - 'bad' - If a client tries to use a name matching 'key' it's denied using EPERM; when the server passes an attribute name matching 'prepend' it's hidden. In many ways it's use is very like - 'ok' as either an explict terminator or for special handling of certain + 'ok' as either an explicit terminator or for special handling of certain patterns. **key** is a string tested as a prefix on an attribute name originating diff --git a/hw/vfio/igd.c b/hw/vfio/igd.c index 64e332746b..470205f487 100644 --- a/hw/vfio/igd.c +++ b/hw/vfio/igd.c @@ -535,7 +535,7 @@ void vfio_probe_igd_bar4_quirk(VFIOPCIDevice *vdev, int nr) } /* - * Assume we have no GMS memory, but allow it to be overrided by device + * Assume we have no GMS memory, but allow it to be overridden by device * option (experimental). The spec doesn't actually allow zero GMS when * when IVD (IGD VGA Disable) is clear, but the claim is that it's unused, * so let's not waste VM memory for it.
Fix also a similar typo in a code comment. Signed-off-by: Stefan Weil <sw@weilnetz.de> --- docs/can.txt | 8 ++++---- docs/interop/vhost-user.rst | 2 +- docs/replay.txt | 2 +- docs/specs/ppc-spapr-numa.rst | 2 +- docs/system/deprecated.rst | 4 ++-- docs/tools/virtiofsd.rst | 2 +- hw/vfio/igd.c | 2 +- 7 files changed, 11 insertions(+), 11 deletions(-)