diff mbox series

[PULL,13/54] hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour

Message ID 20210308173244.20710-14-peter.maydell@linaro.org (mailing list archive)
State New, archived
Headers show
Series [PULL,01/54] clock: Add ClockEvent parameter to callbacks | expand

Commit Message

Peter Maydell March 8, 2021, 5:32 p.m. UTC
The SSE-300's iokit-sysctl device is similar to the SSE-200, but
some registers have moved address or have different behaviours.
In this commit we add case statements for the registers where
the SSE-300 and SSE-200 have the same behaviour. Some registers
are the same on all SSE versions and so need no code change at all.
Putting both of these categories together covers:

0x0 SECDBGSTAT
0x4 SECDBGSET
0x8 SECDBGCLR
0xc SCSECCTRL
0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a
   different set of clocks being controlled; our implementation
   is a dummy reads-as-written anyway
0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation
   is a dummy
0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations;
   we have a dummy implementation
0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our
   implementation is a dummy
0x104 RESET_MASK -- bit allocation differs from SSE-200 but our
   implementation is a dummy
0x108 SWRESET
0x10c GRETREG
0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our
   implementation is a dummy

We also need to migrate the state of these registers which are shared
between the SSE-200 and SSE-300, so update the vmstate 'needed'
function to do this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
---
 hw/misc/iotkit-sysctl.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/hw/misc/iotkit-sysctl.c b/hw/misc/iotkit-sysctl.c
index c67f5b320ab..7f8608c814c 100644
--- a/hw/misc/iotkit-sysctl.c
+++ b/hw/misc/iotkit-sysctl.c
@@ -105,6 +105,7 @@  static uint64_t iotkit_sysctl_read(void *opaque, hwaddr offset,
         case ARMSSE_IOTKIT:
             goto bad_offset;
         case ARMSSE_SSE200:
+        case ARMSSE_SSE300:
             r = s->scsecctrl;
             break;
         default:
@@ -116,6 +117,7 @@  static uint64_t iotkit_sysctl_read(void *opaque, hwaddr offset,
         case ARMSSE_IOTKIT:
             goto bad_offset;
         case ARMSSE_SSE200:
+        case ARMSSE_SSE300:
             r = s->fclk_div;
             break;
         default:
@@ -127,6 +129,7 @@  static uint64_t iotkit_sysctl_read(void *opaque, hwaddr offset,
         case ARMSSE_IOTKIT:
             goto bad_offset;
         case ARMSSE_SSE200:
+        case ARMSSE_SSE300:
             r = s->sysclk_div;
             break;
         default:
@@ -138,6 +141,7 @@  static uint64_t iotkit_sysctl_read(void *opaque, hwaddr offset,
         case ARMSSE_IOTKIT:
             goto bad_offset;
         case ARMSSE_SSE200:
+        case ARMSSE_SSE300:
             r = s->clock_force;
             break;
         default:
@@ -202,6 +206,7 @@  static uint64_t iotkit_sysctl_read(void *opaque, hwaddr offset,
         case ARMSSE_IOTKIT:
             goto bad_offset;
         case ARMSSE_SSE200:
+        case ARMSSE_SSE300:
             r = s->pdcm_pd_sys_sense;
             break;
         default:
@@ -348,6 +353,7 @@  static void iotkit_sysctl_write(void *opaque, hwaddr offset,
         case ARMSSE_IOTKIT:
             goto bad_offset;
         case ARMSSE_SSE200:
+        case ARMSSE_SSE300:
             qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl SCSECCTRL unimplemented\n");
             s->scsecctrl = value;
             break;
@@ -360,6 +366,7 @@  static void iotkit_sysctl_write(void *opaque, hwaddr offset,
         case ARMSSE_IOTKIT:
             goto bad_offset;
         case ARMSSE_SSE200:
+        case ARMSSE_SSE300:
             qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl FCLK_DIV unimplemented\n");
             s->fclk_div = value;
             break;
@@ -372,6 +379,7 @@  static void iotkit_sysctl_write(void *opaque, hwaddr offset,
         case ARMSSE_IOTKIT:
             goto bad_offset;
         case ARMSSE_SSE200:
+        case ARMSSE_SSE300:
             qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl SYSCLK_DIV unimplemented\n");
             s->sysclk_div = value;
             break;
@@ -384,6 +392,7 @@  static void iotkit_sysctl_write(void *opaque, hwaddr offset,
         case ARMSSE_IOTKIT:
             goto bad_offset;
         case ARMSSE_SSE200:
+        case ARMSSE_SSE300:
             qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl CLOCK_FORCE unimplemented\n");
             s->clock_force = value;
             break;
@@ -420,6 +429,7 @@  static void iotkit_sysctl_write(void *opaque, hwaddr offset,
         case ARMSSE_IOTKIT:
             goto bad_offset;
         case ARMSSE_SSE200:
+        case ARMSSE_SSE300:
             qemu_log_mask(LOG_UNIMP,
                           "IoTKit SysCtl PDCM_PD_SYS_SENSE unimplemented\n");
             s->pdcm_pd_sys_sense = value;
@@ -569,7 +579,7 @@  static bool sse200_needed(void *opaque)
 {
     IoTKitSysCtl *s = IOTKIT_SYSCTL(opaque);
 
-    return s->sse_version == ARMSSE_SSE200;
+    return s->sse_version != ARMSSE_IOTKIT;
 }
 
 static const VMStateDescription iotkit_sysctl_sse200_vmstate = {