diff mbox series

[4/4] iotests/108: Test new refcount rebuild algorithm

Message ID 20210310155906.147478-5-mreitz@redhat.com (mailing list archive)
State New, archived
Headers show
Series qcow2: Improve refcount structure rebuilding | expand

Commit Message

Max Reitz March 10, 2021, 3:59 p.m. UTC
One clear problem with how qcow2's refcount structure rebuild algorithm
used to be before "qcow2: Improve refcount structure rebuilding" was
that it is prone to failure for qcow2 images on block devices: There is
generally unused space after the actual image, and if that exceeds what
one refblock covers, the old algorithm would invariably write the
reftable past the block device's end, which cannot work.  The new
algorithm does not have this problem.

Test it with three tests:
(1) Create an image with more empty space at the end than what one
    refblock covers, see whether rebuilding the refcount structures
    results in a change in the image file length.  (It should not.)

(2) Leave precisely enough space somewhere at the beginning of the image
    for the new reftable (and the refblock for that place), see whether
    the new algorithm puts the reftable there.  (It should.)

(3) Test the original problem: Create (something like) a block device
    with a fixed size, then create a qcow2 image in there, write some
    data, and then have qemu-img check rebuild the refcount structures.
    Before HEAD^, the reftable would have been written past the image
    file end, i.e. outside of what the block device provides, which
    cannot work.  HEAD^ should have fixed that.
    ("Something like a block device" means a loop device if we can use
    one ("sudo -n losetup" works), or a FUSE block export with
    growable=false otherwise.)

Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 tests/qemu-iotests/108     | 259 +++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/108.out |  80 ++++++++++++
 2 files changed, 339 insertions(+)

Comments

Eric Blake March 10, 2021, 4:07 p.m. UTC | #1
On 3/10/21 9:59 AM, Max Reitz wrote:
> One clear problem with how qcow2's refcount structure rebuild algorithm
> used to be before "qcow2: Improve refcount structure rebuilding" was
> that it is prone to failure for qcow2 images on block devices: There is
> generally unused space after the actual image, and if that exceeds what
> one refblock covers, the old algorithm would invariably write the
> reftable past the block device's end, which cannot work.  The new
> algorithm does not have this problem.
> 
> Test it with three tests:
> (1) Create an image with more empty space at the end than what one
>     refblock covers, see whether rebuilding the refcount structures
>     results in a change in the image file length.  (It should not.)
> 
> (2) Leave precisely enough space somewhere at the beginning of the image
>     for the new reftable (and the refblock for that place), see whether
>     the new algorithm puts the reftable there.  (It should.)
> 
> (3) Test the original problem: Create (something like) a block device
>     with a fixed size, then create a qcow2 image in there, write some
>     data, and then have qemu-img check rebuild the refcount structures.
>     Before HEAD^, the reftable would have been written past the image
>     file end, i.e. outside of what the block device provides, which
>     cannot work.  HEAD^ should have fixed that.
>     ("Something like a block device" means a loop device if we can use
>     one ("sudo -n losetup" works), or a FUSE block export with
>     growable=false otherwise.)

We could use qemu-nbd as another alternative to create a non-growable
protocol layer.  Then we don't need root access via sudo to run the test.
diff mbox series

Patch

diff --git a/tests/qemu-iotests/108 b/tests/qemu-iotests/108
index 8eaef0b8bf..7b1aa08781 100755
--- a/tests/qemu-iotests/108
+++ b/tests/qemu-iotests/108
@@ -37,6 +37,7 @@  trap "_cleanup; exit \$status" 0 1 2 3 15
 # get standard environment, filters and checks
 . ./common.rc
 . ./common.filter
+. ./common.qemu
 
 # This tests qcow2-specific low-level functionality
 _supported_fmt qcow2
@@ -47,6 +48,22 @@  _supported_os Linux
 # files
 _unsupported_imgopts 'refcount_bits=\([^1]\|.\([^6]\|$\)\)' data_file
 
+# This test either needs sudo -n losetup or FUSE exports to work
+if sudo -n losetup &>/dev/null; then
+    loopdev=true
+else
+    loopdev=false
+
+    # QSD --export fuse will either yield "Parameter 'id' is missing"
+    # or "Invalid parameter 'fuse'", depending on whether there is
+    # FUSE support or not.
+    error=$($QSD --export fuse 2>&1)
+    if [[ $error = *"Invalid parameter 'fuse'" ]]; then
+        _notrun 'Passwordless sudo for losetup or FUSE support required, but' \
+                'neither is available'
+    fi
+fi
+
 echo
 echo '=== Repairing an image without any refcount table ==='
 echo
@@ -138,6 +155,248 @@  _make_test_img 64M
 poke_file "$TEST_IMG" $((0x10008)) "\xff\xff\xff\xff\xff\xff\x00\x00"
 _check_test_img -r all
 
+echo
+echo '=== Check rebuilt reftable location ==='
+
+# In an earlier version of the refcount rebuild algorithm, the
+# reftable was generally placed at the image end (unless something was
+# allocated in the area covered by the refblock right before the image
+# file end, then we would try to place the reftable in that refblock).
+# This was later changed so the reftable would be placed in the
+# earliest possible location.  Test this.
+
+echo
+echo '--- Does the image size increase? ---'
+echo
+
+# First test: Just create some image, write some data to it, and
+# resize it so there is free space at the end of the image (enough
+# that it spans at least one full refblock, which for cluster_size=512
+# images, spans 128k).  With the old algorithm, the reftable would
+# have then been placed at the end of the image file, but with the new
+# one, it will be put in that free space.
+# We want to check whether the size of the image file increases due to
+# rebuilding the refcount structures (it should not).
+
+_make_test_img -o 'cluster_size=512' 1M
+# Write something
+$QEMU_IO -c 'write 0 64k' "$TEST_IMG" | _filter_qemu_io
+
+# Add free space
+file_len=$(stat -c '%s' "$TEST_IMG")
+truncate -s $((file_len + 256 * 1024)) "$TEST_IMG"
+
+# Corrupt the image by saying the image header were not allocated
+rt_offset=$(peek_file_be "$TEST_IMG" 48 8)
+rb_offset=$(peek_file_be "$TEST_IMG" $rt_offset 8)
+poke_file "$TEST_IMG" $rb_offset "\x00\x00"
+
+# Check whether rebuilding the refcount structures increases the image
+# file size
+file_len=$(stat -c '%s' "$TEST_IMG")
+echo
+# The only leaks there can be are the old refcount structures that are
+# leaked during rebuilding, no need to clutter the output with them
+_check_test_img -r all | grep -v '^Repairing cluster.*refcount=1 reference=0'
+echo
+post_repair_file_len=$(stat -c '%s' "$TEST_IMG")
+
+if [[ $file_len -eq $post_repair_file_len ]]; then
+    echo 'OK: Image size did not change'
+else
+    echo 'ERROR: Image size differs' \
+        "($file_len before, $post_repair_file_len after)"
+fi
+
+echo
+echo '--- Will the reftable occupy a hole specifically left for it?  ---'
+echo
+
+# Note: With cluster_size=512, every refblock covers 128k.
+# The reftable covers 8M per reftable cluster.
+
+# Create an image that requires two reftable clusters (just because
+# this is more interesting than a single-clustered reftable).
+_make_test_img -o 'cluster_size=512' 9M
+$QEMU_IO -c 'write 0 8M' "$TEST_IMG" | _filter_qemu_io
+
+# Writing 8M will have resized the reftable.  Unfortunately, doing so
+# will leave holes in the file, so we need to fill them up so we can
+# be sure the whole file is allocated.  Do that by writing
+# consecutively smaller chunks starting from 8 MB, until the file
+# length increases even with a chunk size of 512.  Then we must have
+# filled all holes.
+ofs=$((8 * 1024 * 1024))
+block_len=$((16 * 1024))
+while [[ $block_len -ge 512 ]]; do
+    file_len=$(stat -c '%s' "$TEST_IMG")
+    while [[ $(stat -c '%s' "$TEST_IMG") -eq $file_len ]]; do
+        # Do not include this in the reference output, it does not
+        # really matter which qemu-io calls we do here exactly
+        $QEMU_IO -c "write $ofs $block_len" "$TEST_IMG" >/dev/null
+        ofs=$((ofs + block_len))
+    done
+    block_len=$((block_len / 2))
+done
+
+# Fill up to 9M (do not include this in the reference output either,
+# $ofs is random for all we know)
+$QEMU_IO -c "write $ofs $((9 * 1024 * 1024 - ofs))" "$TEST_IMG" >/dev/null
+
+# Make space as follows:
+# - For the first refblock: Right at the beginning of the image (this
+#   refblock is placed in the first place possible),
+# - For the reftable somewhere soon afterwards, still near the
+#   beginning of the image (i.e. covered by the first refblock); the
+#   reftable too is placed in the first place possible, but only after
+#   all refblocks have been placed)
+# No space is needed for the other refblocks, because no refblock is
+# put before the space it covers.  In this test case, we do not mind
+# if they are placed at the image file's end.
+
+# Before we make that space, we have to find out the host offset of
+# the area that belonged to the two data clusters at guest offset 4k,
+# because we expect the reftable to be placed there, and we will have
+# to verify that it is.
+
+l1_offset=$(peek_file_be "$TEST_IMG" 40 8)
+l2_offset=$(peek_file_be "$TEST_IMG" $l1_offset 8)
+l2_offset=$((l2_offset & 0x00fffffffffffe00))
+data_4k_offset=$(peek_file_be "$TEST_IMG" \
+                 $((l2_offset + 4096 / 512 * 8)) 8)
+data_4k_offset=$((data_4k_offset & 0x00fffffffffffe00))
+
+$QEMU_IO -c "discard 0 512" -c "discard 4k 1k" "$TEST_IMG" | _filter_qemu_io
+
+# Corrupt the image by saying the image header were not allocated
+rt_offset=$(peek_file_be "$TEST_IMG" 48 8)
+rb_offset=$(peek_file_be "$TEST_IMG" $rt_offset 8)
+poke_file "$TEST_IMG" $rb_offset "\x00\x00"
+
+echo
+# The only leaks there can be are the old refcount structures that are
+# leaked during rebuilding, no need to clutter the output with them
+_check_test_img -r all | grep -v '^Repairing cluster.*refcount=1 reference=0'
+echo
+
+# Check whether the reftable was put where we expected
+rt_offset=$(peek_file_be "$TEST_IMG" 48 8)
+if [[ $rt_offset -eq $data_4k_offset ]]; then
+    echo 'OK: Reftable is where we expect it'
+else
+    echo "ERROR: Reftable is at $rt_offset, but was expected at $data_4k_offset"
+fi
+
+echo
+echo '--- Rebuilding refcount structures on block devices ---'
+echo
+
+# A block device cannot really grow, at least not during qemu-img
+# check.  As mentioned in the above cases, rebuilding the refcount
+# structure may lead to new refcount structures being written after
+# the end of the image, and in the past that happened even if there
+# was more than sufficient space in the image.  Such post-EOF writes
+# will not work on block devices, so test that the new algorithm
+# avoids it.
+
+# If we have passwordless sudo and losetup, we can use those to create
+# a block device.  Otherwise, we can resort to qemu's FUSE export to
+# create a file that isn't growable, which effectively tests the same
+# thing.
+
+_cleanup_test_img
+truncate -s $((64 * 1024 * 1024)) "$TEST_IMG"
+
+if $loopdev; then
+    export_mp=$(sudo -n losetup --show -f "$TEST_IMG")
+    export_mp_driver=host_device
+    sudo -n chmod go+rw "$export_mp"
+else
+    # Create non-growable FUSE export that is a bit like an empty
+    # block device
+    export_mp="$TEST_DIR/fuse-export"
+    export_mp_driver=file
+    touch "$export_mp"
+
+    qsd=y _launch_qemu \
+        --blockdev file,node-name=export-node,filename="$TEST_IMG" \
+        --export fuse,id=fuse-export,node-name=export-node,mountpoint="$export_mp",writable=on,growable=off
+    fuse_export_handle=$QEMU_HANDLE
+
+    # Must not appear in the reference output (to stay equal to the
+    # losetup branch).
+    _send_qemu_cmd \
+        $fuse_export_handle \
+        '{ "execute": "qmp_capabilities" }' \
+        'return' \
+        >/dev/null
+fi
+
+# Now create a qcow2 image on the device -- unfortunately, qemu-img
+# create force-creates the file, so we have to resort to the
+# blockdev-create job.
+qsd=y _launch_qemu \
+    --blockdev $export_mp_driver,node-name=file,filename="$export_mp"
+
+_send_qemu_cmd \
+    $QEMU_HANDLE \
+    '{ "execute": "qmp_capabilities" }' \
+    'return'
+
+# Small cluster size again, so the image needs multiple refblocks
+_send_qemu_cmd \
+    $QEMU_HANDLE \
+    '{ "execute": "blockdev-create",
+       "arguments": {
+           "job-id": "create",
+           "options": {
+               "driver": "qcow2",
+               "file": "file",
+               "size": '$((64 * 1024 * 1024))',
+               "cluster-size": 512
+           } } }' \
+    '"concluded"'
+
+_send_qemu_cmd \
+    $QEMU_HANDLE \
+    '{ "execute": "job-dismiss", "arguments": { "id": "create" } }' \
+    'return'
+
+_send_qemu_cmd \
+    $QEMU_HANDLE \
+    '{ "execute": "quit" }' \
+    'return'
+
+wait=y _cleanup_single_qemu $QEMU_HANDLE
+echo
+
+# Write some data
+$QEMU_IO -c 'write 0 64k' "$export_mp" | _filter_qemu_io
+
+# Corrupt the image by saying the image header were not allocated
+rt_offset=$(peek_file_be "$export_mp" 48 8)
+rb_offset=$(peek_file_be "$export_mp" $rt_offset 8)
+poke_file "$export_mp" $rb_offset "\x00\x00"
+
+echo
+TEST_IMG="$export_mp" _check_test_img -r all \
+    | grep -v '^Repairing cluster.*refcount=1 reference=0'
+
+if $loopdev; then
+    sudo -n losetup -d "$export_mp"
+else
+    # Again, must not appear in the reference output (to stay equal to
+    # the losetup branch).
+    _send_qemu_cmd \
+        $fuse_export_handle \
+        '{ "execute": "quit" }' \
+        'return' \
+        >/dev/null
+
+    wait=y _cleanup_single_qemu $fuse_export_handle >/dev/null
+    rm -f "$export_mp"
+fi
+
 # success, all done
 echo '*** done'
 rm -f $seq.full
diff --git a/tests/qemu-iotests/108.out b/tests/qemu-iotests/108.out
index 75bab8dc84..a4c571df1a 100644
--- a/tests/qemu-iotests/108.out
+++ b/tests/qemu-iotests/108.out
@@ -105,6 +105,86 @@  The following inconsistencies were found and repaired:
     0 leaked clusters
     1 corruptions
 
+Double checking the fixed image now...
+No errors were found on the image.
+
+=== Check rebuilt reftable location ===
+
+--- Does the image size increase? ---
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
+wrote 65536/65536 bytes at offset 0
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+ERROR cluster 0 refcount=0 reference=1
+Rebuilding refcount structure
+The following inconsistencies were found and repaired:
+
+    0 leaked clusters
+    1 corruptions
+
+Double checking the fixed image now...
+No errors were found on the image.
+
+OK: Image size did not change
+
+--- Will the reftable occupy a hole specifically left for it?  ---
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=9437184
+wrote 8388608/8388608 bytes at offset 0
+8 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+discard 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+discard 1024/1024 bytes at offset 4096
+1 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+ERROR cluster 0 refcount=0 reference=1
+Rebuilding refcount structure
+The following inconsistencies were found and repaired:
+
+    0 leaked clusters
+    1 corruptions
+
+Double checking the fixed image now...
+No errors were found on the image.
+
+OK: Reftable is where we expect it
+
+--- Rebuilding refcount structures on block devices ---
+
+{ "execute": "qmp_capabilities" }
+{"return": {}}
+{ "execute": "blockdev-create",
+       "arguments": {
+           "job-id": "create",
+           "options": {
+               "driver": "IMGFMT",
+               "file": "file",
+               "size": 67108864,
+               "cluster-size": 512
+           } } }
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "create"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "create"}}
+{"return": {}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "waiting", "id": "create"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "pending", "id": "create"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "concluded", "id": "create"}}
+{ "execute": "job-dismiss", "arguments": { "id": "create" } }
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "create"}}
+{"return": {}}
+{ "execute": "quit" }
+{"return": {}}
+
+wrote 65536/65536 bytes at offset 0
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+ERROR cluster 0 refcount=0 reference=1
+Rebuilding refcount structure
+The following inconsistencies were found and repaired:
+
+    0 leaked clusters
+    1 corruptions
+
 Double checking the fixed image now...
 No errors were found on the image.
 *** done