diff mbox series

[PULL,004/114] hw/arm/mps2-tz: Make SRAM_ADDR_WIDTH board-specific

Message ID 20210525150324.32370-5-peter.maydell@linaro.org (mailing list archive)
State New, archived
Headers show
Series [PULL,001/114] hw/arm/smmuv3: Another range invalidation fix | expand

Commit Message

Peter Maydell May 25, 2021, 3:01 p.m. UTC
The AN547 sets the SRAM_ADDR_WIDTH for the SSE-300 to 21;
since this is not the default value for the SSE-300, model this
in mps2-tz.c as a per-board value.

Reported-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210510190844.17799-3-peter.maydell@linaro.org
---
 hw/arm/mps2-tz.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index 77ff83acb06..f2595b1c7f7 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -123,6 +123,7 @@  struct MPS2TZMachineClass {
     int numirq; /* Number of external interrupts */
     int uart_overflow_irq; /* number of the combined UART overflow IRQ */
     uint32_t init_svtor; /* init-svtor setting for SSE */
+    uint32_t sram_addr_width; /* SRAM_ADDR_WIDTH setting for SSE */
     const RAMInfo *raminfo;
     const char *armsse_type;
 };
@@ -806,6 +807,7 @@  static void mps2tz_common_init(MachineState *machine)
                              OBJECT(system_memory), &error_abort);
     qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", mmc->numirq);
     qdev_prop_set_uint32(iotkitdev, "init-svtor", mmc->init_svtor);
+    qdev_prop_set_uint32(iotkitdev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width);
     qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk);
     qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk);
     sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal);
@@ -1263,6 +1265,7 @@  static void mps2tz_an505_class_init(ObjectClass *oc, void *data)
     mmc->numirq = 92;
     mmc->uart_overflow_irq = 47;
     mmc->init_svtor = 0x10000000;
+    mmc->sram_addr_width = 15;
     mmc->raminfo = an505_raminfo;
     mmc->armsse_type = TYPE_IOTKIT;
     mps2tz_set_default_ram_info(mmc);
@@ -1290,6 +1293,7 @@  static void mps2tz_an521_class_init(ObjectClass *oc, void *data)
     mmc->numirq = 92;
     mmc->uart_overflow_irq = 47;
     mmc->init_svtor = 0x10000000;
+    mmc->sram_addr_width = 15;
     mmc->raminfo = an505_raminfo; /* AN521 is the same as AN505 here */
     mmc->armsse_type = TYPE_SSE200;
     mps2tz_set_default_ram_info(mmc);
@@ -1317,6 +1321,7 @@  static void mps3tz_an524_class_init(ObjectClass *oc, void *data)
     mmc->numirq = 95;
     mmc->uart_overflow_irq = 47;
     mmc->init_svtor = 0x10000000;
+    mmc->sram_addr_width = 15;
     mmc->raminfo = an524_raminfo;
     mmc->armsse_type = TYPE_SSE200;
     mps2tz_set_default_ram_info(mmc);
@@ -1349,6 +1354,7 @@  static void mps3tz_an547_class_init(ObjectClass *oc, void *data)
     mmc->numirq = 96;
     mmc->uart_overflow_irq = 48;
     mmc->init_svtor = 0x00000000;
+    mmc->sram_addr_width = 21;
     mmc->raminfo = an547_raminfo;
     mmc->armsse_type = TYPE_SSE300;
     mps2tz_set_default_ram_info(mmc);