diff mbox series

[v2,1/2] vfio-ccw: forward halt/clear errors

Message ID 20210705163952.736020-2-cohuck@redhat.com (mailing list archive)
State New, archived
Headers show
Series s390x: improve subchannel error handling (vfio) | expand

Commit Message

Cornelia Huck July 5, 2021, 4:39 p.m. UTC
hsch and csch basically have two parts: execute the command,
and perform the halt/clear function. For fully emulated
subchannels, it is pretty clear how it will work: check the
subchannel state, and actually 'perform the halt/clear function'
and set cc 0 if everything looks good.

For passthrough subchannels, some of the checking is done
within QEMU, but some has to be done within the kernel. QEMU's
subchannel state may be such that we can perform the async
function, but the kernel may still get a cc != 0 when it is
actually executing the instruction. In that case, we need to
set the condition actually encountered by the kernel; if we
set cc 0 on error, we would actually need to inject an interrupt
as well.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
---
 hw/s390x/css.c | 38 ++++++++++++++++++++++++++++++++++----
 hw/vfio/ccw.c  |  4 ++--
 2 files changed, 36 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/hw/s390x/css.c b/hw/s390x/css.c
index 133ddea5757e..7d9523f81138 100644
--- a/hw/s390x/css.c
+++ b/hw/s390x/css.c
@@ -1206,23 +1206,53 @@  static void sch_handle_start_func_virtual(SubchDev *sch)
 
 }
 
-static void sch_handle_halt_func_passthrough(SubchDev *sch)
+static IOInstEnding sch_handle_halt_func_passthrough(SubchDev *sch)
 {
     int ret;
 
     ret = s390_ccw_halt(sch);
     if (ret == -ENOSYS) {
         sch_handle_halt_func(sch);
+        return IOINST_CC_EXPECTED;
+    }
+    /*
+     * Some conditions may have been detected prior to starting the halt
+     * function; map them to the correct cc.
+     * Note that we map both -ENODEV and -EACCES to cc 3 (there's not really
+     * anything else we can do.)
+     */
+    switch (ret) {
+    case -EBUSY:
+        return IOINST_CC_BUSY;
+    case -ENODEV:
+    case -EACCES:
+        return IOINST_CC_NOT_OPERATIONAL;
+    default:
+        return IOINST_CC_EXPECTED;
     }
 }
 
-static void sch_handle_clear_func_passthrough(SubchDev *sch)
+static IOInstEnding sch_handle_clear_func_passthrough(SubchDev *sch)
 {
     int ret;
 
     ret = s390_ccw_clear(sch);
     if (ret == -ENOSYS) {
         sch_handle_clear_func(sch);
+        return IOINST_CC_EXPECTED;
+    }
+    /*
+     * Some conditions may have been detected prior to starting the clear
+     * function; map them to the correct cc.
+     * Note that we map both -ENODEV and -EACCES to cc 3 (there's not really
+     * anything else we can do.)
+     */
+    switch (ret) {
+    case -ENODEV:
+    case -EACCES:
+        return IOINST_CC_NOT_OPERATIONAL;
+    default:
+        return IOINST_CC_EXPECTED;
     }
 }
 
@@ -1265,9 +1295,9 @@  IOInstEnding do_subchannel_work_passthrough(SubchDev *sch)
     SCHIB *schib = &sch->curr_status;
 
     if (schib->scsw.ctrl & SCSW_FCTL_CLEAR_FUNC) {
-        sch_handle_clear_func_passthrough(sch);
+        return sch_handle_clear_func_passthrough(sch);
     } else if (schib->scsw.ctrl & SCSW_FCTL_HALT_FUNC) {
-        sch_handle_halt_func_passthrough(sch);
+        return sch_handle_halt_func_passthrough(sch);
     } else if (schib->scsw.ctrl & SCSW_FCTL_START_FUNC) {
         return sch_handle_start_func_passthrough(sch);
     }
diff --git a/hw/vfio/ccw.c b/hw/vfio/ccw.c
index 000992fb9fb6..0354737666a1 100644
--- a/hw/vfio/ccw.c
+++ b/hw/vfio/ccw.c
@@ -199,7 +199,7 @@  again:
     case 0:
     case -ENODEV:
     case -EACCES:
-        return 0;
+        return ret;
     case -EFAULT:
     default:
         sch_gen_unit_exception(sch);
@@ -240,7 +240,7 @@  again:
     case -EBUSY:
     case -ENODEV:
     case -EACCES:
-        return 0;
+        return ret;
     case -EFAULT:
     default:
         sch_gen_unit_exception(sch);