[PULL,08/11] hw/riscv: sifive_u: Make sure firmware info is 8-byte aligned

Commit Message

Alistair Francis July 12, 2021, 10:53 p.m. UTC

From: Bin Meng <[e-mail]>

Currently the firmware dynamic info (fw_dyn) is put right after
the reset vector, which is not 8-byte aligned on RV64. OpenSBI
fw_dynamic uses ld to read contents from 'struct fw_dynamic_info',
which expects fw_dyn to be on the 8-byte boundary, otherwise the
misaligned load exception may happen. Fortunately this does not
cause any issue on QEMU, as QEMU does support misaligned load.

RV32 does not have any issue as it is 4-byte aligned already.
Change to make sure it is 8-byte aligned which works for both
RV32 and RV64.

Signed-off-by: Bin Meng <[e-mail]>
Reviewed-by: Alistair Francis <[e-mail]>
Message-id: [e-mail]
Signed-off-by: Alistair Francis <[e-mail]>
---
 hw/riscv/sifive_u.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Patch

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index e75ca38783..87bbd10b21 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -602,10 +602,10 @@  static void sifive_u_machine_init(MachineState *machine)
     }
 
     /* reset vector */
-    uint32_t reset_vec[11] = {
+    uint32_t reset_vec[12] = {
         s->msel,                       /* MSEL pin state */
         0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(fw_dyn) */
-        0x02828613,                    /*     addi   a2, t0, %pcrel_lo(1b) */
+        0x02c28613,                    /*     addi   a2, t0, %pcrel_lo(1b) */
         0xf1402573,                    /*     csrr   a0, mhartid  */
         0,
         0,
@@ -613,6 +613,7 @@  static void sifive_u_machine_init(MachineState *machine)
         start_addr,                    /* start: .dword */
         start_addr_hi32,
         fdt_load_addr,                 /* fdt_laddr: .dword */
+        0x00000000,
         0x00000000,
                                        /* fw_dyn: */
     };