@@ -133,7 +133,7 @@ struct USBDescConfig {
const USBDescIface *ifs;
};
-/* conceptually an Interface Association Descriptor, and releated interfaces */
+/* conceptually an Interface Association Descriptor, and related interfaces */
struct USBDescIfaceAssoc {
uint8_t bFirstInterface;
uint8_t bInterfaceCount;
@@ -625,9 +625,9 @@
* Definitions for Icom Inc. devices
*/
#define ICOM_VID 0x0C26 /* Icom vendor ID */
-/* Note: ID-1 is a communications tranceiver for HAM-radio operators */
+/* Note: ID-1 is a communications transceiver for HAM-radio operators */
#define ICOM_ID_1_PID 0x0004 /* ID-1 USB to RS-232 */
-/* Note: OPC is an Optional cable to connect an Icom Tranceiver */
+/* Note: OPC is an Optional cable to connect an Icom Transceiver */
#define ICOM_OPC_U_UC_PID 0x0018 /* OPC-478UC, OPC-1122U cloning cable */
/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */
#define ICOM_ID_RP2C1_PID 0x0009 /* ID-RP2C Asset 1 to RS-232 */
@@ -5,12 +5,12 @@
/*
* Microsoft OS Descriptors
*
- * Windows tries to fetch some special descriptors with informations
+ * Windows tries to fetch some special descriptors with information
* specifically for windows. Presence is indicated using a special
* string @ index 0xee. There are two kinds of descriptors:
*
* compatid descriptor
- * Used to bind drivers, if usb class isn't specific enougth.
+ * Used to bind drivers, if usb class isn't specific enough.
* Used for PTP/MTP for example (both share the same usb class).
*
* properties descriptor
@@ -23,7 +23,7 @@
* HLM\SYSTEM\CurrentControlSet\Control\usbflags
* HLM\SYSTEM\CurrentControlSet\Enum\USB
* Windows will complain it can't delete entries on the second one.
- * It has deleted everything it had permissions too, which is enouth
+ * It has deleted everything it had permissions too, which is enough
* as this includes "Device Parameters".
*
* http://msdn.microsoft.com/en-us/library/windows/hardware/ff537430.aspx
@@ -192,8 +192,8 @@ static int usb_desc_msos_prop(const USBDesc *desc, uint8_t *dest)
if (desc->msos->SelectiveSuspendEnabled) {
/*
* Signaling remote wakeup capability in the standard usb
- * descriptors isn't enouth to make windows actually use it.
- * This is the "Yes, we really mean it" registy entry to flip
+ * descriptors isn't enough to make windows actually use it.
+ * This is the "Yes, we really mean it" registry entry to flip
* the switch in the windows drivers.
*/
length += usb_desc_msos_prop_dword(dest+length,
@@ -168,7 +168,7 @@ static const USBDescIface desc_iface[] = {
STRING_FEATURE_UNIT, /* u8 iFeature */
}
},{
- /* Headphone Ouptut Terminal ID3 Descriptor */
+ /* Headphone Output Terminal ID3 Descriptor */
.data = (uint8_t[]) {
0x09, /* u8 bLength */
USB_DT_CS_INTERFACE, /* u8 bDescriptorType */
@@ -332,7 +332,7 @@ static const USBDescIface desc_iface_multi[] = {
STRING_FEATURE_UNIT, /* u8 iFeature */
}
},{
- /* Headphone Ouptut Terminal ID3 Descriptor */
+ /* Headphone Output Terminal ID3 Descriptor */
.data = (uint8_t[]) {
0x09, /* u8 bLength */
USB_DT_CS_INTERFACE, /* u8 bDescriptorType */
@@ -1706,7 +1706,7 @@ static void usb_host_free_streams(USBDevice *udev, USBEndpoint **eps,
/*
* This is *NOT* about restoring state. We have absolutely no idea
* what state the host device is in at the moment and whenever it is
- * still present in the first place. Attemping to contine where we
+ * still present in the first place. Attempting to continue where we
* left off is impossible.
*
* What we are going to do here is emulate a surprise removal of
@@ -307,7 +307,7 @@ static void u2f_emulated_realize(U2FKeyState *base, Error **errp)
rc = u2f_emulated_setup_vdev_manualy(key);
} else {
error_setg(errp, "%s: cert, priv, entropy and counter "
- "parameters must be provided to manualy configure "
+ "parameters must be provided to manually configure "
"the emulated device", TYPE_U2F_EMULATED);
return;
}