| Message ID | 20210928032456.3192603-2-pdel@fb.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | hw: aspeed_gpio: Fix pin I/O type declarations | expand |
On 9/28/21 05:24, pdel@fb.com wrote: > From: Peter Delevoryas <pdel@fb.com> > > Some of the pin declarations in the Aspeed GPIO module were incorrect, > probably because of confusion over which bits in the input and output > uint32_t's correspond to which groups in the label array. Since the > uint32_t literals are in big endian, it's sort of the opposite of what > would be intuitive. The least significant bit in ast2500_set_props[6] > corresponds to GPIOY0, not GPIOAB7. > > GPIOxx indicates input and output capabilities, GPIxx indicates only > input, GPOxx indicates only output. > > AST2500: > - Previously had GPIW0..GPIW7 and GPIX0..GPIX7, that's correct. > - Previously had GPIOY0..GPIOY3, should have been GPIOY0..GPIOY7. > - Previously had GPIOAB0..GPIOAB3 and GPIAB4..GPIAB7, should only have > been GPIOAB0..GPIOAB3. > > AST2600: > - GPIOT0..GPIOT7 should have been GPIT0..GPIT7. > - GPIOU0..GPIOU7 should have been GPIU0..GPIU7. > - GPIW0..GPIW7 should have been GPIOW0..GPIOW7. > - GPIOY0..GPIOY7 and GPIOZ0...GPIOZ7 were disabled. > > Fixes: 4b7f956862dc2db4c5c ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500") > Fixes: 36d737ee82b2972167e ("hw/gpio: Add in AST2600 specific implementation") > Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> > --- > hw/gpio/aspeed_gpio.c | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c > index dfa6d6cb40..33a40a624a 100644 > --- a/hw/gpio/aspeed_gpio.c > +++ b/hw/gpio/aspeed_gpio.c > @@ -796,7 +796,7 @@ static const GPIOSetProperties ast2500_set_props[] = { > [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, > [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, > [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, > - [6] = {0xffffff0f, 0x0fffff0f, {"Y", "Z", "AA", "AB"} }, > + [6] = {0x0fffffff, 0x0fffffff, {"Y", "Z", "AA", "AB"} }, > [7] = {0x000000ff, 0x000000ff, {"AC"} }, > }; > > @@ -805,9 +805,9 @@ static GPIOSetProperties ast2600_3_3v_set_props[] = { > [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} }, > [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} }, > [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, > - [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, > - [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, > - [6] = {0xffff0000, 0x0fff0000, {"Y", "Z", "", ""} }, > + [4] = {0xffffffff, 0x00ffffff, {"Q", "R", "S", "T"} }, > + [5] = {0xffffffff, 0xffffff00, {"U", "V", "W", "X"} }, > + [6] = {0x0000ffff, 0x0000ffff, {"Y", "Z"} }, > }; > > static GPIOSetProperties ast2600_1_8v_set_props[] = { >
> On Sep 28, 2021, at 3:53 AM, Damien Hedde <damien.hedde@greensocs.com> wrote: > > > > On 9/28/21 05:24, pdel@fb.com wrote: >> From: Peter Delevoryas <pdel@fb.com> >> Some of the pin declarations in the Aspeed GPIO module were incorrect, >> probably because of confusion over which bits in the input and output >> uint32_t's correspond to which groups in the label array. Since the >> uint32_t literals are in big endian, it's sort of the opposite of what >> would be intuitive. The least significant bit in ast2500_set_props[6] >> corresponds to GPIOY0, not GPIOAB7. >> GPIOxx indicates input and output capabilities, GPIxx indicates only >> input, GPOxx indicates only output. >> AST2500: >> - Previously had GPIW0..GPIW7 and GPIX0..GPIX7, that's correct. >> - Previously had GPIOY0..GPIOY3, should have been GPIOY0..GPIOY7. >> - Previously had GPIOAB0..GPIOAB3 and GPIAB4..GPIAB7, should only have >> been GPIOAB0..GPIOAB3. >> AST2600: >> - GPIOT0..GPIOT7 should have been GPIT0..GPIT7. >> - GPIOU0..GPIOU7 should have been GPIU0..GPIU7. >> - GPIW0..GPIW7 should have been GPIOW0..GPIOW7. >> - GPIOY0..GPIOY7 and GPIOZ0...GPIOZ7 were disabled. >> Fixes: 4b7f956862dc2db4c5c ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500") >> Fixes: 36d737ee82b2972167e ("hw/gpio: Add in AST2600 specific implementation") >> Signed-off-by: Peter Delevoryas <pdel@fb.com> > > Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> cc’ing Dan > >> --- >> hw/gpio/aspeed_gpio.c | 8 ++++---- >> 1 file changed, 4 insertions(+), 4 deletions(-) >> diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c >> index dfa6d6cb40..33a40a624a 100644 >> --- a/hw/gpio/aspeed_gpio.c >> +++ b/hw/gpio/aspeed_gpio.c >> @@ -796,7 +796,7 @@ static const GPIOSetProperties ast2500_set_props[] = { >> [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, >> [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, >> [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, >> - [6] = {0xffffff0f, 0x0fffff0f, {"Y", "Z", "AA", "AB"} }, >> + [6] = {0x0fffffff, 0x0fffffff, {"Y", "Z", "AA", "AB"} }, >> [7] = {0x000000ff, 0x000000ff, {"AC"} }, >> }; >> @@ -805,9 +805,9 @@ static GPIOSetProperties ast2600_3_3v_set_props[] = { >> [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} }, >> [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} }, >> [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, >> - [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, >> - [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, >> - [6] = {0xffff0000, 0x0fff0000, {"Y", "Z", "", ""} }, >> + [4] = {0xffffffff, 0x00ffffff, {"Q", "R", "S", "T"} }, >> + [5] = {0xffffffff, 0xffffff00, {"U", "V", "W", "X"} }, >> + [6] = {0x0000ffff, 0x0000ffff, {"Y", "Z"} }, >> }; >> static GPIOSetProperties ast2600_1_8v_set_props[] = {
On Thu, 2021-09-30 at 00:45 +0000, Peter Delevoryas wrote: > > > On Sep 28, 2021, at 3:53 AM, Damien Hedde > > <damien.hedde@greensocs.com> wrote: > > > > > > > > On 9/28/21 05:24, pdel@fb.com wrote: > > > From: Peter Delevoryas <pdel@fb.com> > > > Some of the pin declarations in the Aspeed GPIO module were > > > incorrect, > > > probably because of confusion over which bits in the input and > > > output > > > uint32_t's correspond to which groups in the label array. Since > > > the > > > uint32_t literals are in big endian, it's sort of the opposite of > > > what > > > would be intuitive. The least significant bit in > > > ast2500_set_props[6] > > > corresponds to GPIOY0, not GPIOAB7. Looks like I didn't think about endianness! I remember there was conflicting information about which groups of GPIOs were input only - the input/output table says groups W and X for ast2600 while the info in direction registers says T and U. I don't recall why I went with the former over the latter but the latter seems to be correct as this is what is in the kernel driver. > > > GPIOxx indicates input and output capabilities, GPIxx indicates > > > only > > > input, GPOxx indicates only output. > > > AST2500: > > > - Previously had GPIW0..GPIW7 and GPIX0..GPIX7, that's correct. > > > - Previously had GPIOY0..GPIOY3, should have been GPIOY0..GPIOY7. > > > - Previously had GPIOAB0..GPIOAB3 and GPIAB4..GPIAB7, should only > > > have > > > been GPIOAB0..GPIOAB3. > > > AST2600: > > > - GPIOT0..GPIOT7 should have been GPIT0..GPIT7. > > > - GPIOU0..GPIOU7 should have been GPIU0..GPIU7. > > > - GPIW0..GPIW7 should have been GPIOW0..GPIOW7. > > > - GPIOY0..GPIOY7 and GPIOZ0...GPIOZ7 were disabled. > > > Fixes: 4b7f956862dc2db4c5c ("hw/gpio: Add basic Aspeed GPIO model > > > for AST2400 and AST2500") > > > Fixes: 36d737ee82b2972167e ("hw/gpio: Add in AST2600 specific > > > implementation") > > > Signed-off-by: Peter Delevoryas <pdel@fb.com> > > > > Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> > Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> > cc’ing Dan > > > > > > --- > > > hw/gpio/aspeed_gpio.c | 8 ++++---- > > > 1 file changed, 4 insertions(+), 4 deletions(-) > > > diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c > > > index dfa6d6cb40..33a40a624a 100644 > > > --- a/hw/gpio/aspeed_gpio.c > > > +++ b/hw/gpio/aspeed_gpio.c > > > @@ -796,7 +796,7 @@ static const GPIOSetProperties > > > ast2500_set_props[] = { > > > [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, > > > [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, > > > [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, > > > - [6] = {0xffffff0f, 0x0fffff0f, {"Y", "Z", "AA", "AB"} }, > > > + [6] = {0x0fffffff, 0x0fffffff, {"Y", "Z", "AA", "AB"} }, > > > [7] = {0x000000ff, 0x000000ff, {"AC"} }, > > > }; > > > @@ -805,9 +805,9 @@ static GPIOSetProperties > > > ast2600_3_3v_set_props[] = { > > > [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} }, > > > [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} }, > > > [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, > > > - [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, > > > - [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, > > > - [6] = {0xffff0000, 0x0fff0000, {"Y", "Z", "", ""} }, > > > + [4] = {0xffffffff, 0x00ffffff, {"Q", "R", "S", "T"} }, > > > + [5] = {0xffffffff, 0xffffff00, {"U", "V", "W", "X"} }, > > > + [6] = {0x0000ffff, 0x0000ffff, {"Y", "Z"} }, > > > }; > > > static GPIOSetProperties ast2600_1_8v_set_props[] = { >
> On Sep 30, 2021, at 5:05 AM, Rashmica Gupta <rashmica.g@gmail.com> wrote: > > On Thu, 2021-09-30 at 00:45 +0000, Peter Delevoryas wrote: >> >>> On Sep 28, 2021, at 3:53 AM, Damien Hedde >>> <damien.hedde@greensocs.com> wrote: >>> >>> >>> >>> On 9/28/21 05:24, pdel@fb.com wrote: >>>> From: Peter Delevoryas <pdel@fb.com> >>>> Some of the pin declarations in the Aspeed GPIO module were >>>> incorrect, >>>> probably because of confusion over which bits in the input and >>>> output >>>> uint32_t's correspond to which groups in the label array. Since >>>> the >>>> uint32_t literals are in big endian, it's sort of the opposite of >>>> what >>>> would be intuitive. The least significant bit in >>>> ast2500_set_props[6] >>>> corresponds to GPIOY0, not GPIOAB7. > > Looks like I didn't think about endianness! I remember there was > conflicting information about which groups of GPIOs were input only - > the input/output table says groups W and X for ast2600 while the info > in direction registers says T and U. I don't recall why I went with the > former over the latter but the latter seems to be correct as this is > what is in the kernel driver. Oh I see, thanks for checking. > >>>> GPIOxx indicates input and output capabilities, GPIxx indicates >>>> only >>>> input, GPOxx indicates only output. >>>> AST2500: >>>> - Previously had GPIW0..GPIW7 and GPIX0..GPIX7, that's correct. >>>> - Previously had GPIOY0..GPIOY3, should have been GPIOY0..GPIOY7. >>>> - Previously had GPIOAB0..GPIOAB3 and GPIAB4..GPIAB7, should only >>>> have >>>> been GPIOAB0..GPIOAB3. >>>> AST2600: >>>> - GPIOT0..GPIOT7 should have been GPIT0..GPIT7. >>>> - GPIOU0..GPIOU7 should have been GPIU0..GPIU7. >>>> - GPIW0..GPIW7 should have been GPIOW0..GPIOW7. >>>> - GPIOY0..GPIOY7 and GPIOZ0...GPIOZ7 were disabled. >>>> Fixes: 4b7f956862dc2db4c5c ("hw/gpio: Add basic Aspeed GPIO model >>>> for AST2400 and AST2500") >>>> Fixes: 36d737ee82b2972167e ("hw/gpio: Add in AST2600 specific >>>> implementation") >>>> Signed-off-by: Peter Delevoryas <pdel@fb.com> >>> >>> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> >> > > Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Thanks Rashmica! Peter > >> cc’ing Dan >> >>> >>>> --- >>>> hw/gpio/aspeed_gpio.c | 8 ++++---- >>>> 1 file changed, 4 insertions(+), 4 deletions(-) >>>> diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c >>>> index dfa6d6cb40..33a40a624a 100644 >>>> --- a/hw/gpio/aspeed_gpio.c >>>> +++ b/hw/gpio/aspeed_gpio.c >>>> @@ -796,7 +796,7 @@ static const GPIOSetProperties >>>> ast2500_set_props[] = { >>>> [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, >>>> [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, >>>> [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, >>>> - [6] = {0xffffff0f, 0x0fffff0f, {"Y", "Z", "AA", "AB"} }, >>>> + [6] = {0x0fffffff, 0x0fffffff, {"Y", "Z", "AA", "AB"} }, >>>> [7] = {0x000000ff, 0x000000ff, {"AC"} }, >>>> }; >>>> @@ -805,9 +805,9 @@ static GPIOSetProperties >>>> ast2600_3_3v_set_props[] = { >>>> [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} }, >>>> [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} }, >>>> [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, >>>> - [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, >>>> - [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, >>>> - [6] = {0xffff0000, 0x0fff0000, {"Y", "Z", "", ""} }, >>>> + [4] = {0xffffffff, 0x00ffffff, {"Q", "R", "S", "T"} }, >>>> + [5] = {0xffffffff, 0xffffff00, {"U", "V", "W", "X"} }, >>>> + [6] = {0x0000ffff, 0x0000ffff, {"Y", "Z"} }, >>>> }; >>>> static GPIOSetProperties ast2600_1_8v_set_props[] = {
diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c index dfa6d6cb40..33a40a624a 100644 --- a/hw/gpio/aspeed_gpio.c +++ b/hw/gpio/aspeed_gpio.c @@ -796,7 +796,7 @@ static const GPIOSetProperties ast2500_set_props[] = { [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, - [6] = {0xffffff0f, 0x0fffff0f, {"Y", "Z", "AA", "AB"} }, + [6] = {0x0fffffff, 0x0fffffff, {"Y", "Z", "AA", "AB"} }, [7] = {0x000000ff, 0x000000ff, {"AC"} }, }; @@ -805,9 +805,9 @@ static GPIOSetProperties ast2600_3_3v_set_props[] = { [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} }, [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} }, [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, - [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, - [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, - [6] = {0xffff0000, 0x0fff0000, {"Y", "Z", "", ""} }, + [4] = {0xffffffff, 0x00ffffff, {"Q", "R", "S", "T"} }, + [5] = {0xffffffff, 0xffffff00, {"U", "V", "W", "X"} }, + [6] = {0x0000ffff, 0x0000ffff, {"Y", "Z"} }, }; static GPIOSetProperties ast2600_1_8v_set_props[] = {