diff mbox series

[1/6] pci: implement power state

Message ID 20211011120504.254053-2-kraxel@redhat.com (mailing list archive)
State New, archived
Headers show
Series RfC: try improve native hotplug for pcie root ports | expand

Commit Message

Gerd Hoffmann Oct. 11, 2021, 12:04 p.m. UTC
This allows to power off pci devices.  In "off" state the devices will
not be visible.  No pci config space access, no pci bar access, no dma.

Default state is "on", so this patch (alone) should not change behavior.

Use case:  Allows hotplug controllers implement slot power.  Hotplug
controllers doing so should set the inital power state for devices in
the ->plug callback.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 include/hw/pci/pci.h |  2 ++
 hw/pci/pci.c         | 25 +++++++++++++++++++++++--
 hw/pci/pci_host.c    |  6 ++++--
 3 files changed, 29 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index 7fc90132cf1d..7cb6d92e17f7 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -268,6 +268,7 @@  typedef struct PCIReqIDCache PCIReqIDCache;
 struct PCIDevice {
     DeviceState qdev;
     bool partially_hotplugged;
+    bool has_power;
 
     /* PCI config space */
     uint8_t *config;
@@ -904,5 +905,6 @@  extern const VMStateDescription vmstate_pci_device;
 }
 
 MSIMessage pci_get_msi_message(PCIDevice *dev, int vector);
+void pci_set_power(PCIDevice *pci_dev, bool state);
 
 #endif
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 186758ee11fe..94f53944c7cc 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -1380,6 +1380,9 @@  static void pci_update_mappings(PCIDevice *d)
             continue;
 
         new_addr = pci_bar_address(d, i, r->type, r->size);
+        if (!d->has_power) {
+            new_addr = PCI_BAR_UNMAPPED;
+        }
 
         /* This bar isn't changed */
         if (new_addr == r->addr)
@@ -1464,8 +1467,8 @@  void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val_in, int
     if (range_covers_byte(addr, l, PCI_COMMAND)) {
         pci_update_irq_disabled(d, was_irq_disabled);
         memory_region_set_enabled(&d->bus_master_enable_region,
-                                  pci_get_word(d->config + PCI_COMMAND)
-                                    & PCI_COMMAND_MASTER);
+                                  (pci_get_word(d->config + PCI_COMMAND)
+                                   & PCI_COMMAND_MASTER) && d->has_power);
     }
 
     msi_write_config(d, addr, val_in, l);
@@ -2190,6 +2193,8 @@  static void pci_qdev_realize(DeviceState *qdev, Error **errp)
         pci_qdev_unrealize(DEVICE(pci_dev));
         return;
     }
+
+    pci_set_power(pci_dev, true);
 }
 
 PCIDevice *pci_new_multifunction(int devfn, bool multifunction,
@@ -2861,6 +2866,22 @@  MSIMessage pci_get_msi_message(PCIDevice *dev, int vector)
     return msg;
 }
 
+void pci_set_power(PCIDevice *d, bool state)
+{
+    if (d->has_power == state) {
+        return;
+    }
+
+    d->has_power = state;
+    pci_update_mappings(d);
+    memory_region_set_enabled(&d->bus_master_enable_region,
+                              (pci_get_word(d->config + PCI_COMMAND)
+                               & PCI_COMMAND_MASTER) && d->has_power);
+    if (!d->has_power) {
+        pci_device_reset(d);
+    }
+}
+
 static const TypeInfo pci_device_type_info = {
     .name = TYPE_PCI_DEVICE,
     .parent = TYPE_DEVICE,
diff --git a/hw/pci/pci_host.c b/hw/pci/pci_host.c
index cf02f0d6a501..7beafd40a8e9 100644
--- a/hw/pci/pci_host.c
+++ b/hw/pci/pci_host.c
@@ -74,7 +74,8 @@  void pci_host_config_write_common(PCIDevice *pci_dev, uint32_t addr,
     /* non-zero functions are only exposed when function 0 is present,
      * allowing direct removal of unexposed functions.
      */
-    if (pci_dev->qdev.hotplugged && !pci_get_function_0(pci_dev)) {
+    if ((pci_dev->qdev.hotplugged && !pci_get_function_0(pci_dev)) ||
+        !pci_dev->has_power) {
         return;
     }
 
@@ -97,7 +98,8 @@  uint32_t pci_host_config_read_common(PCIDevice *pci_dev, uint32_t addr,
     /* non-zero functions are only exposed when function 0 is present,
      * allowing direct removal of unexposed functions.
      */
-    if (pci_dev->qdev.hotplugged && !pci_get_function_0(pci_dev)) {
+    if ((pci_dev->qdev.hotplugged && !pci_get_function_0(pci_dev)) ||
+        !pci_dev->has_power) {
         return ~0x0;
     }