Message ID | 20220111084546.4145785-3-troy_lee@aspeedtech.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Aspeed I3C device model | expand |
On 1/11/22 09:45, Troy Lee wrote: > v3: > - Remove unrelated changes to SPI2 address > - Remove controller irq line > > v2: Rebase to mainline QEMU > > Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> You should consider updating the documentation : https://qemu.readthedocs.io/en/latest/system/arm/aspeed.html Thanks, C. > --- > hw/arm/aspeed_ast2600.c | 16 ++++++++++++++++ > include/hw/arm/aspeed_soc.h | 3 +++ > 2 files changed, 19 insertions(+) > > diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c > index e33483fb5d..8f37bdb1d8 100644 > --- a/hw/arm/aspeed_ast2600.c > +++ b/hw/arm/aspeed_ast2600.c > @@ -61,6 +61,7 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = { > [ASPEED_DEV_UART1] = 0x1E783000, > [ASPEED_DEV_UART5] = 0x1E784000, > [ASPEED_DEV_VUART] = 0x1E787000, > + [ASPEED_DEV_I3C] = 0x1E7A0000, > [ASPEED_DEV_SDRAM] = 0x80000000, > }; > > @@ -108,6 +109,7 @@ static const int aspeed_soc_ast2600_irqmap[] = { > [ASPEED_DEV_ETH4] = 33, > [ASPEED_DEV_KCS] = 138, /* 138 -> 142 */ > [ASPEED_DEV_DP] = 62, > + [ASPEED_DEV_I3C] = 102, /* 102 -> 107 */ > }; > > static qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int ctrl) > @@ -223,6 +225,8 @@ static void aspeed_soc_ast2600_init(Object *obj) > > snprintf(typename, sizeof(typename), "aspeed.hace-%s", socname); > object_initialize_child(obj, "hace", &s->hace, typename); > + > + object_initialize_child(obj, "i3c", &s->i3c, TYPE_ASPEED_I3C); > } > > /* > @@ -523,6 +527,18 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) > sysbus_mmio_map(SYS_BUS_DEVICE(&s->hace), 0, sc->memmap[ASPEED_DEV_HACE]); > sysbus_connect_irq(SYS_BUS_DEVICE(&s->hace), 0, > aspeed_soc_get_irq(s, ASPEED_DEV_HACE)); > + > + /* I3C */ > + if (!sysbus_realize(SYS_BUS_DEVICE(&s->i3c), errp)) { > + return; > + } > + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i3c), 0, sc->memmap[ASPEED_DEV_I3C]); > + for (i = 0; i < ASPEED_I3C_NR_DEVICES; i++) { > + qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), > + sc->irqmap[ASPEED_DEV_I3C] + i); > + /* The AST2600 I3C controller has one IRQ per bus. */ > + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i3c.devices[i]), 0, irq); > + } > } > > static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data) > diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h > index 18fb7eed46..cae9906684 100644 > --- a/include/hw/arm/aspeed_soc.h > +++ b/include/hw/arm/aspeed_soc.h > @@ -21,6 +21,7 @@ > #include "hw/timer/aspeed_timer.h" > #include "hw/rtc/aspeed_rtc.h" > #include "hw/i2c/aspeed_i2c.h" > +#include "hw/misc/aspeed_i3c.h" > #include "hw/ssi/aspeed_smc.h" > #include "hw/misc/aspeed_hace.h" > #include "hw/watchdog/wdt_aspeed.h" > @@ -51,6 +52,7 @@ struct AspeedSoCState { > AspeedRtcState rtc; > AspeedTimerCtrlState timerctrl; > AspeedI2CState i2c; > + AspeedI3CState i3c; > AspeedSCUState scu; > AspeedHACEState hace; > AspeedXDMAState xdma; > @@ -141,6 +143,7 @@ enum { > ASPEED_DEV_HACE, > ASPEED_DEV_DPMCU, > ASPEED_DEV_DP, > + ASPEED_DEV_I3C, > }; > > #endif /* ASPEED_SOC_H */ >
On Tue, 11 Jan 2022 at 08:46, Troy Lee <troy_lee@aspeedtech.com> wrote: > > v3: > - Remove unrelated changes to SPI2 address > - Remove controller irq line > > v2: Rebase to mainline QEMU > > Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> This turns out not to build on macOS or on 32-bit hosts because of format string issues -- you can't portably use %lx to print uint64_t or hwaddr types. I have folded in the following fix: diff --git a/hw/misc/aspeed_i3c.c b/hw/misc/aspeed_i3c.c index 43771d768ad..f54f5da522b 100644 --- a/hw/misc/aspeed_i3c.c +++ b/hw/misc/aspeed_i3c.c @@ -150,7 +150,8 @@ static void aspeed_i3c_device_write(void *opaque, hwaddr offset, case R_I3C_VER_TYPE: case R_EXTENDED_CAPABILITY: qemu_log_mask(LOG_GUEST_ERROR, - "%s: write to readonly register[%02lx] = %08lx\n", + "%s: write to readonly register[0x%02" HWADDR_PRIx + "] = 0x%08" PRIx64 "\n", __func__, offset, value); break; case R_RX_TX_DATA_PORT: @@ -231,13 +232,15 @@ static void aspeed_i3c_write(void *opaque, case R_I3C6_REG1: if (data & R_I3C1_REG1_I2C_MODE_MASK) { qemu_log_mask(LOG_UNIMP, - "%s: Not support I2C mode [%08lx]=%08lx", + "%s: Unsupported I2C mode [0x%08" HWADDR_PRIx + "]=%08" PRIx64 "\n", __func__, addr << 2, data); break; } if (data & R_I3C1_REG1_SA_EN_MASK) { qemu_log_mask(LOG_UNIMP, - "%s: Not support slave mode [%08lx]=%08lx", + "%s: Unsupported slave mode [%08" HWADDR_PRIx + "]=0x%08" PRIx64 "\n", __func__, addr << 2, data); break; } which also includes a small grammar fix, adds the missing trailing newlines, and includes the "0x" prefix to make it clearer to the user that the values printed are hex. thanks -- PMM
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index e33483fb5d..8f37bdb1d8 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -61,6 +61,7 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = { [ASPEED_DEV_UART1] = 0x1E783000, [ASPEED_DEV_UART5] = 0x1E784000, [ASPEED_DEV_VUART] = 0x1E787000, + [ASPEED_DEV_I3C] = 0x1E7A0000, [ASPEED_DEV_SDRAM] = 0x80000000, }; @@ -108,6 +109,7 @@ static const int aspeed_soc_ast2600_irqmap[] = { [ASPEED_DEV_ETH4] = 33, [ASPEED_DEV_KCS] = 138, /* 138 -> 142 */ [ASPEED_DEV_DP] = 62, + [ASPEED_DEV_I3C] = 102, /* 102 -> 107 */ }; static qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int ctrl) @@ -223,6 +225,8 @@ static void aspeed_soc_ast2600_init(Object *obj) snprintf(typename, sizeof(typename), "aspeed.hace-%s", socname); object_initialize_child(obj, "hace", &s->hace, typename); + + object_initialize_child(obj, "i3c", &s->i3c, TYPE_ASPEED_I3C); } /* @@ -523,6 +527,18 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->hace), 0, sc->memmap[ASPEED_DEV_HACE]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->hace), 0, aspeed_soc_get_irq(s, ASPEED_DEV_HACE)); + + /* I3C */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->i3c), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i3c), 0, sc->memmap[ASPEED_DEV_I3C]); + for (i = 0; i < ASPEED_I3C_NR_DEVICES; i++) { + qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), + sc->irqmap[ASPEED_DEV_I3C] + i); + /* The AST2600 I3C controller has one IRQ per bus. */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i3c.devices[i]), 0, irq); + } } static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index 18fb7eed46..cae9906684 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -21,6 +21,7 @@ #include "hw/timer/aspeed_timer.h" #include "hw/rtc/aspeed_rtc.h" #include "hw/i2c/aspeed_i2c.h" +#include "hw/misc/aspeed_i3c.h" #include "hw/ssi/aspeed_smc.h" #include "hw/misc/aspeed_hace.h" #include "hw/watchdog/wdt_aspeed.h" @@ -51,6 +52,7 @@ struct AspeedSoCState { AspeedRtcState rtc; AspeedTimerCtrlState timerctrl; AspeedI2CState i2c; + AspeedI3CState i3c; AspeedSCUState scu; AspeedHACEState hace; AspeedXDMAState xdma; @@ -141,6 +143,7 @@ enum { ASPEED_DEV_HACE, ASPEED_DEV_DPMCU, ASPEED_DEV_DP, + ASPEED_DEV_I3C, }; #endif /* ASPEED_SOC_H */
v3: - Remove unrelated changes to SPI2 address - Remove controller irq line v2: Rebase to mainline QEMU Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> --- hw/arm/aspeed_ast2600.c | 16 ++++++++++++++++ include/hw/arm/aspeed_soc.h | 3 +++ 2 files changed, 19 insertions(+)