diff --git a/MAINTAINERS b/MAINTAINERS
index 3601984b5d..3df8e938e0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3140,10 +3140,13 @@ M: Titus Rwantare <titusr@google.com>
 S: Maintained
 F: hw/i2c/pmbus_device.c
 F: hw/sensor/adm1272.c
+F: hw/sensor/isl_pmbus.c
 F: hw/sensor/max34451.c
 F: include/hw/i2c/pmbus_device.h
+F: include/hw/sensor/isl_pmbus.h
 F: tests/qtest/adm1272-test.c
 F: tests/qtest/max34451-test.c
+F: tests/qtest/isl_pmbus-test.c
 
 Firmware schema specifications
 M: Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 6945330030..8047ad6378 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -400,6 +400,7 @@ config NPCM7XX
     select SMBUS
     select AT24C  # EEPROM
     select MAX34451
+    select ISL_PMBUS
     select PL310  # cache controller
     select PMBUS
     select SERIAL
diff --git a/hw/sensor/Kconfig b/hw/sensor/Kconfig
index 215944decc..70fb335789 100644
--- a/hw/sensor/Kconfig
+++ b/hw/sensor/Kconfig
@@ -30,3 +30,8 @@ config LSM303DLHC_MAG
     bool
     depends on I2C
     default y if I2C_DEVICES
+
+config ISL_PMBUS
+    bool
+    depends on I2C
+
diff --git a/hw/sensor/isl_pmbus.c b/hw/sensor/isl_pmbus.c
new file mode 100644
index 0000000000..8cc7220a57
--- /dev/null
+++ b/hw/sensor/isl_pmbus.c
@@ -0,0 +1,210 @@
+/*
+ * PMBus device for Renesas Digital Multiphase Voltage Regulators
+ *
+ * Copyright 2021 Google LLC
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sensor/isl_pmbus.h"
+#include "hw/qdev-properties.h"
+#include "qapi/visitor.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+
+static uint8_t isl_pmbus_read_byte(PMBusDevice *pmdev)
+{
+    qemu_log_mask(LOG_GUEST_ERROR,
+                  "%s: reading from unsupported register: 0x%02x\n",
+                  __func__, pmdev->code);
+    return 0xFF;
+}
+
+static int isl_pmbus_write_data(PMBusDevice *pmdev, const uint8_t *buf,
+                              uint8_t len)
+{
+    qemu_log_mask(LOG_GUEST_ERROR,
+                  "%s: write to unsupported register: 0x%02x\n",
+                  __func__, pmdev->code);
+    return 0xFF;
+}
+
+/* TODO: Implement coefficients support in pmbus_device.c for qmp */
+static void isl_pmbus_get(Object *obj, Visitor *v, const char *name,
+                                     void *opaque, Error **errp)
+{
+    visit_type_uint16(v, name, (uint16_t *)opaque, errp);
+}
+
+static void isl_pmbus_set(Object *obj, Visitor *v, const char *name,
+                                 void *opaque, Error **errp)
+{
+    PMBusDevice *pmdev = PMBUS_DEVICE(obj);
+    uint16_t *internal = opaque;
+    uint16_t value;
+    if (!visit_type_uint16(v, name, &value, errp)) {
+        return;
+    }
+
+    *internal = value;
+    pmbus_check_limits(pmdev);
+}
+
+static void isl_pmbus_exit_reset(Object *obj)
+{
+    PMBusDevice *pmdev = PMBUS_DEVICE(obj);
+
+    pmdev->page = 0;
+    pmdev->capability = ISL_CAPABILITY_DEFAULT;
+    for (int i = 0; i < pmdev->num_pages; i++) {
+        pmdev->pages[i].operation = ISL_OPERATION_DEFAULT;
+        pmdev->pages[i].on_off_config = ISL_ON_OFF_CONFIG_DEFAULT;
+        pmdev->pages[i].vout_mode = ISL_VOUT_MODE_DEFAULT;
+        pmdev->pages[i].vout_command = ISL_VOUT_COMMAND_DEFAULT;
+        pmdev->pages[i].vout_max = ISL_VOUT_MAX_DEFAULT;
+        pmdev->pages[i].vout_margin_high = ISL_VOUT_MARGIN_HIGH_DEFAULT;
+        pmdev->pages[i].vout_margin_low = ISL_VOUT_MARGIN_LOW_DEFAULT;
+        pmdev->pages[i].vout_transition_rate = ISL_VOUT_TRANSITION_RATE_DEFAULT;
+        pmdev->pages[i].vout_ov_fault_limit = ISL_VOUT_OV_FAULT_LIMIT_DEFAULT;
+        pmdev->pages[i].ot_fault_limit = ISL_OT_FAULT_LIMIT_DEFAULT;
+        pmdev->pages[i].ot_warn_limit = ISL_OT_WARN_LIMIT_DEFAULT;
+        pmdev->pages[i].vin_ov_warn_limit = ISL_VIN_OV_WARN_LIMIT_DEFAULT;
+        pmdev->pages[i].vin_uv_warn_limit = ISL_VIN_UV_WARN_LIMIT_DEFAULT;
+        pmdev->pages[i].iin_oc_fault_limit = ISL_IIN_OC_FAULT_LIMIT_DEFAULT;
+        pmdev->pages[i].ton_delay = ISL_TON_DELAY_DEFAULT;
+        pmdev->pages[i].ton_rise = ISL_TON_RISE_DEFAULT;
+        pmdev->pages[i].toff_fall = ISL_TOFF_FALL_DEFAULT;
+        pmdev->pages[i].revision = ISL_REVISION_DEFAULT;
+
+        pmdev->pages[i].read_vout = ISL_READ_VOUT_DEFAULT;
+        pmdev->pages[i].read_iout = ISL_READ_IOUT_DEFAULT;
+        pmdev->pages[i].read_pout = ISL_READ_POUT_DEFAULT;
+        pmdev->pages[i].read_vin = ISL_READ_VIN_DEFAULT;
+        pmdev->pages[i].read_iin = ISL_READ_IIN_DEFAULT;
+        pmdev->pages[i].read_pin = ISL_READ_PIN_DEFAULT;
+        pmdev->pages[i].read_temperature_1 = ISL_READ_TEMP_DEFAULT;
+        pmdev->pages[i].read_temperature_2 = ISL_READ_TEMP_DEFAULT;
+        pmdev->pages[i].read_temperature_3 = ISL_READ_TEMP_DEFAULT;
+    }
+}
+
+static void isl_pmbus_add_props(Object *obj, uint64_t *flags, uint8_t pages)
+{
+    PMBusDevice *pmdev = PMBUS_DEVICE(obj);
+    for (int i = 0; i < pages; i++) {
+        if (flags[i] & PB_HAS_VIN) {
+            object_property_add(obj, "vin[*]", "uint16",
+                                isl_pmbus_get,
+                                isl_pmbus_set,
+                                NULL, &pmdev->pages[i].read_vin);
+        }
+
+        if (flags[i] & PB_HAS_VOUT) {
+            object_property_add(obj, "vout[*]", "uint16",
+                                isl_pmbus_get,
+                                isl_pmbus_set,
+                                NULL, &pmdev->pages[i].read_vout);
+        }
+
+        if (flags[i] & PB_HAS_IIN) {
+            object_property_add(obj, "iin[*]", "uint16",
+                                isl_pmbus_get,
+                                isl_pmbus_set,
+                                NULL, &pmdev->pages[i].read_iin);
+        }
+
+        if (flags[i] & PB_HAS_IOUT) {
+            object_property_add(obj, "iout[*]", "uint16",
+                                isl_pmbus_get,
+                                isl_pmbus_set,
+                                NULL, &pmdev->pages[i].read_iout);
+        }
+
+        if (flags[i] & PB_HAS_PIN) {
+            object_property_add(obj, "pin[*]", "uint16",
+                                isl_pmbus_get,
+                                isl_pmbus_set,
+                                NULL, &pmdev->pages[i].read_pin);
+        }
+
+        if (flags[i] & PB_HAS_POUT) {
+            object_property_add(obj, "pout[*]", "uint16",
+                                isl_pmbus_get,
+                                isl_pmbus_set,
+                                NULL, &pmdev->pages[i].read_pout);
+        }
+
+        if (flags[i] & PB_HAS_TEMPERATURE) {
+            object_property_add(obj, "temp1[*]", "uint16",
+                                isl_pmbus_get,
+                                isl_pmbus_set,
+                                NULL, &pmdev->pages[i].read_temperature_1);
+        }
+
+        if (flags[i] & PB_HAS_TEMP2) {
+            object_property_add(obj, "temp2[*]", "uint16",
+                                isl_pmbus_get,
+                                isl_pmbus_set,
+                                NULL, &pmdev->pages[i].read_temperature_2);
+        }
+
+        if (flags[i] & PB_HAS_TEMP3) {
+            object_property_add(obj, "temp3[*]", "uint16",
+                                isl_pmbus_get,
+                                isl_pmbus_set,
+                                NULL, &pmdev->pages[i].read_temperature_3);
+        }
+    }
+}
+
+static void raa22xx_init(Object *obj)
+{
+    PMBusDevice *pmdev = PMBUS_DEVICE(obj);
+    uint64_t flags[2];
+
+    flags[0] = PB_HAS_VIN | PB_HAS_VOUT | PB_HAS_VOUT_MODE |
+               PB_HAS_VOUT_RATING | PB_HAS_VOUT_MARGIN | PB_HAS_IIN |
+               PB_HAS_IOUT | PB_HAS_PIN | PB_HAS_POUT | PB_HAS_TEMPERATURE |
+               PB_HAS_TEMP2 | PB_HAS_TEMP3 | PB_HAS_STATUS_MFR_SPECIFIC;
+    flags[1] = PB_HAS_IIN | PB_HAS_PIN | PB_HAS_TEMPERATURE | PB_HAS_TEMP3 |
+               PB_HAS_VOUT | PB_HAS_VOUT_MODE | PB_HAS_VOUT_MARGIN |
+               PB_HAS_VOUT_RATING | PB_HAS_IOUT | PB_HAS_POUT |
+               PB_HAS_STATUS_MFR_SPECIFIC;
+
+    pmbus_page_config(pmdev, 0, flags[0]);
+    pmbus_page_config(pmdev, 1, flags[1]);
+    isl_pmbus_add_props(obj, flags, 2);
+}
+
+static void isl_pmbus_class_init(ObjectClass *klass, void *data, uint8_t pages)
+{
+    PMBusDeviceClass *k = PMBUS_DEVICE_CLASS(klass);
+    k->write_data = isl_pmbus_write_data;
+    k->receive_byte = isl_pmbus_read_byte;
+    k->device_num_pages = pages;
+}
+
+static void isl69260_class_init(ObjectClass *klass, void *data)
+{
+    ResettableClass *rc = RESETTABLE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    dc->desc = "Renesas ISL69260 Digital Multiphase Voltage Regulator";
+    rc->phases.exit = isl_pmbus_exit_reset;
+    isl_pmbus_class_init(klass, data, 2);
+}
+
+static const TypeInfo isl69260_info = {
+    .name = TYPE_ISL69260,
+    .parent = TYPE_PMBUS_DEVICE,
+    .instance_size = sizeof(ISLState),
+    .instance_init = raa22xx_init,
+    .class_init = isl69260_class_init,
+};
+
+static void isl_pmbus_register_types(void)
+{
+    type_register_static(&isl69260_info);
+}
+
+type_init(isl_pmbus_register_types)
diff --git a/hw/sensor/meson.build b/hw/sensor/meson.build
index d1bba290da..2e82991ff1 100644
--- a/hw/sensor/meson.build
+++ b/hw/sensor/meson.build
@@ -5,3 +5,4 @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c'))
 softmmu_ss.add(when: 'CONFIG_ADM1272', if_true: files('adm1272.c'))
 softmmu_ss.add(when: 'CONFIG_MAX34451', if_true: files('max34451.c'))
 softmmu_ss.add(when: 'CONFIG_LSM303DLHC_MAG', if_true: files('lsm303dlhc_mag.c'))
+softmmu_ss.add(when: 'CONFIG_ISL_PMBUS', if_true: files('isl_pmbus.c'))
diff --git a/include/hw/sensor/isl_pmbus.h b/include/hw/sensor/isl_pmbus.h
new file mode 100644
index 0000000000..8115aaa698
--- /dev/null
+++ b/include/hw/sensor/isl_pmbus.h
@@ -0,0 +1,50 @@
+/*
+ * PMBus device for Renesas Digital Multiphase Voltage Regulators
+ *
+ * Copyright 2022 Google LLC
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef HW_MISC_ISL_PMBUS_H
+#define HW_MISC_ISL_PMBUS_H
+
+#include "hw/i2c/pmbus_device.h"
+#include "qom/object.h"
+
+#define TYPE_ISL69260   "isl69260"
+
+struct ISLState {
+    PMBusDevice parent;
+};
+
+OBJECT_DECLARE_SIMPLE_TYPE(ISLState, ISL69260)
+
+#define ISL_CAPABILITY_DEFAULT                 0x40
+#define ISL_OPERATION_DEFAULT                  0x80
+#define ISL_ON_OFF_CONFIG_DEFAULT              0x16
+#define ISL_VOUT_MODE_DEFAULT                  0x40
+#define ISL_VOUT_COMMAND_DEFAULT               0x0384
+#define ISL_VOUT_MAX_DEFAULT                   0x08FC
+#define ISL_VOUT_MARGIN_HIGH_DEFAULT           0x0640
+#define ISL_VOUT_MARGIN_LOW_DEFAULT            0xFA
+#define ISL_VOUT_TRANSITION_RATE_DEFAULT       0x64
+#define ISL_VOUT_OV_FAULT_LIMIT_DEFAULT        0x076C
+#define ISL_OT_FAULT_LIMIT_DEFAULT             0x7D
+#define ISL_OT_WARN_LIMIT_DEFAULT              0x07D0
+#define ISL_VIN_OV_WARN_LIMIT_DEFAULT          0x36B0
+#define ISL_VIN_UV_WARN_LIMIT_DEFAULT          0x1F40
+#define ISL_IIN_OC_FAULT_LIMIT_DEFAULT         0x32
+#define ISL_TON_DELAY_DEFAULT                  0x14
+#define ISL_TON_RISE_DEFAULT                   0x01F4
+#define ISL_TOFF_FALL_DEFAULT                  0x01F4
+#define ISL_REVISION_DEFAULT                   0x33
+#define ISL_READ_VOUT_DEFAULT                  1000
+#define ISL_READ_IOUT_DEFAULT                  40
+#define ISL_READ_POUT_DEFAULT                  4
+#define ISL_READ_TEMP_DEFAULT                  25
+#define ISL_READ_VIN_DEFAULT                   1100
+#define ISL_READ_IIN_DEFAULT                   40
+#define ISL_READ_PIN_DEFAULT                   4
+
+#endif
diff --git a/tests/qtest/isl_pmbus-test.c b/tests/qtest/isl_pmbus-test.c
new file mode 100644
index 0000000000..59fa67f110
--- /dev/null
+++ b/tests/qtest/isl_pmbus-test.c
@@ -0,0 +1,393 @@
+/*
+ * QTests for the ISL_PMBUS digital voltage regulators
+ *
+ * Copyright 2021 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include <math.h>
+#include "hw/i2c/pmbus_device.h"
+#include "hw/sensor/isl_pmbus.h"
+#include "libqtest-single.h"
+#include "libqos/qgraph.h"
+#include "libqos/i2c.h"
+#include "qapi/qmp/qdict.h"
+#include "qapi/qmp/qnum.h"
+#include "qemu/bitops.h"
+
+#define TEST_ID "isl_pmbus-test"
+#define TEST_ADDR (0x43)
+
+static uint16_t qmp_isl_pmbus_get(const char *id, const char *property)
+{
+    QDict *response;
+    uint64_t ret;
+
+    response = qmp("{ 'execute': 'qom-get', 'arguments': { 'path': %s, "
+                   "'property': %s } }", id, property);
+    g_assert(qdict_haskey(response, "return"));
+    ret = qnum_get_uint(qobject_to(QNum, qdict_get(response, "return")));
+    qobject_unref(response);
+    return ret;
+}
+
+static void qmp_isl_pmbus_set(const char *id,
+                            const char *property,
+                            uint16_t value)
+{
+    QDict *response;
+
+    response = qmp("{ 'execute': 'qom-set', 'arguments': { 'path': %s, "
+                   "'property': %s, 'value': %u } }", id, property, value);
+    g_assert(qdict_haskey(response, "return"));
+    qobject_unref(response);
+}
+
+/* PMBus commands are little endian vs i2c_set16 in i2c.h which is big endian */
+static uint16_t isl_pmbus_i2c_get16(QI2CDevice *i2cdev, uint8_t reg)
+{
+    uint8_t resp[2];
+    i2c_read_block(i2cdev, reg, resp, sizeof(resp));
+    return (resp[1] << 8) | resp[0];
+}
+
+/* PMBus commands are little endian vs i2c_set16 in i2c.h which is big endian */
+static void isl_pmbus_i2c_set16(QI2CDevice *i2cdev, uint8_t reg, uint16_t value)
+{
+    uint8_t data[2];
+
+    data[0] = value & 255;
+    data[1] = value >> 8;
+    i2c_write_block(i2cdev, reg, data, sizeof(data));
+}
+
+static void test_defaults(void *obj, void *data, QGuestAllocator *alloc)
+{
+    uint16_t value, i2c_value;
+    QI2CDevice *i2cdev = (QI2CDevice *)obj;
+
+    value = qmp_isl_pmbus_get(TEST_ID, "vout[0]");
+    g_assert_cmpuint(value, ==, ISL_READ_VOUT_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_IOUT);
+    g_assert_cmpuint(i2c_value, ==, ISL_READ_IOUT_DEFAULT);
+
+    value = qmp_isl_pmbus_get(TEST_ID, "pout[0]");
+    g_assert_cmpuint(value, ==, ISL_READ_POUT_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_VIN);
+    g_assert_cmpuint(i2c_value, ==, ISL_READ_VIN_DEFAULT);
+
+    value = qmp_isl_pmbus_get(TEST_ID, "iin[0]");
+    g_assert_cmpuint(value, ==, ISL_READ_IIN_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_PIN);
+    g_assert_cmpuint(i2c_value, ==, ISL_READ_PIN_DEFAULT);
+
+    value = qmp_isl_pmbus_get(TEST_ID, "temp1[0]");
+    g_assert_cmpuint(value, ==, ISL_READ_TEMP_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_TEMPERATURE_2);
+    g_assert_cmpuint(i2c_value, ==, ISL_READ_TEMP_DEFAULT);
+
+    i2c_value = i2c_get8(i2cdev, PMBUS_CAPABILITY);
+    g_assert_cmphex(i2c_value, ==, ISL_CAPABILITY_DEFAULT);
+
+    i2c_value = i2c_get8(i2cdev, PMBUS_OPERATION);
+    g_assert_cmphex(i2c_value, ==, ISL_OPERATION_DEFAULT);
+
+    i2c_value = i2c_get8(i2cdev, PMBUS_ON_OFF_CONFIG);
+    g_assert_cmphex(i2c_value, ==, ISL_ON_OFF_CONFIG_DEFAULT);
+
+    i2c_value = i2c_get8(i2cdev, PMBUS_VOUT_MODE);
+    g_assert_cmphex(i2c_value, ==, ISL_VOUT_MODE_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_COMMAND);
+    g_assert_cmphex(i2c_value, ==, ISL_VOUT_COMMAND_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_MAX);
+    g_assert_cmphex(i2c_value, ==, ISL_VOUT_MAX_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_MARGIN_HIGH);
+    g_assert_cmphex(i2c_value, ==, ISL_VOUT_MARGIN_HIGH_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_MARGIN_LOW);
+    g_assert_cmphex(i2c_value, ==, ISL_VOUT_MARGIN_LOW_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_TRANSITION_RATE);
+    g_assert_cmphex(i2c_value, ==, ISL_VOUT_TRANSITION_RATE_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_OV_FAULT_LIMIT);
+    g_assert_cmphex(i2c_value, ==, ISL_VOUT_OV_FAULT_LIMIT_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_OT_FAULT_LIMIT);
+    g_assert_cmphex(i2c_value, ==, ISL_OT_FAULT_LIMIT_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_OT_WARN_LIMIT);
+    g_assert_cmphex(i2c_value, ==, ISL_OT_WARN_LIMIT_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VIN_OV_WARN_LIMIT);
+    g_assert_cmphex(i2c_value, ==, ISL_VIN_OV_WARN_LIMIT_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VIN_UV_WARN_LIMIT);
+    g_assert_cmphex(i2c_value, ==, ISL_VIN_UV_WARN_LIMIT_DEFAULT);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_IIN_OC_FAULT_LIMIT);
+    g_assert_cmphex(i2c_value, ==, ISL_IIN_OC_FAULT_LIMIT_DEFAULT);
+
+    i2c_value = i2c_get8(i2cdev, PMBUS_REVISION);
+    g_assert_cmphex(i2c_value, ==, ISL_REVISION_DEFAULT);
+}
+
+/* test qmp access */
+static void test_tx_rx(void *obj, void *data, QGuestAllocator *alloc)
+{
+    uint16_t i2c_value, value;
+    QI2CDevice *i2cdev = (QI2CDevice *)obj;
+
+    qmp_isl_pmbus_set(TEST_ID, "vin[0]", 200);
+    value = qmp_isl_pmbus_get(TEST_ID, "vin[0]");
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_VIN);
+    g_assert_cmpuint(value, ==, i2c_value);
+
+    qmp_isl_pmbus_set(TEST_ID, "vout[0]", 2500);
+    value = qmp_isl_pmbus_get(TEST_ID, "vout[0]");
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_VOUT);
+    g_assert_cmpuint(value, ==, i2c_value);
+
+    qmp_isl_pmbus_set(TEST_ID, "iin[0]", 300);
+    value = qmp_isl_pmbus_get(TEST_ID, "iin[0]");
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_IIN);
+    g_assert_cmpuint(value, ==, i2c_value);
+
+    qmp_isl_pmbus_set(TEST_ID, "iout[0]", 310);
+    value = qmp_isl_pmbus_get(TEST_ID, "iout[0]");
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_IOUT);
+    g_assert_cmpuint(value, ==, i2c_value);
+
+    qmp_isl_pmbus_set(TEST_ID, "pin[0]", 100);
+    value = qmp_isl_pmbus_get(TEST_ID, "pin[0]");
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_PIN);
+    g_assert_cmpuint(value, ==, i2c_value);
+
+    qmp_isl_pmbus_set(TEST_ID, "pout[0]", 95);
+    value = qmp_isl_pmbus_get(TEST_ID, "pout[0]");
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_POUT);
+    g_assert_cmpuint(value, ==, i2c_value);
+
+    qmp_isl_pmbus_set(TEST_ID, "temp1[0]", 26);
+    value = qmp_isl_pmbus_get(TEST_ID, "temp1[0]");
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_TEMPERATURE_1);
+    g_assert_cmpuint(value, ==, i2c_value);
+
+    qmp_isl_pmbus_set(TEST_ID, "temp2[0]", 27);
+    value = qmp_isl_pmbus_get(TEST_ID, "temp2[0]");
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_TEMPERATURE_2);
+    g_assert_cmpuint(value, ==, i2c_value);
+
+    qmp_isl_pmbus_set(TEST_ID, "temp3[0]", 28);
+    value = qmp_isl_pmbus_get(TEST_ID, "temp3[0]");
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_TEMPERATURE_3);
+    g_assert_cmpuint(value, ==, i2c_value);
+
+}
+
+/* test r/w registers */
+static void test_rw_regs(void *obj, void *data, QGuestAllocator *alloc)
+{
+    uint16_t i2c_value;
+    QI2CDevice *i2cdev = (QI2CDevice *)obj;
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VOUT_COMMAND, 0x1234);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_COMMAND);
+    g_assert_cmphex(i2c_value, ==, 0x1234);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VOUT_TRIM, 0x4567);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_TRIM);
+    g_assert_cmphex(i2c_value, ==, 0x4567);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VOUT_MAX, 0x9876);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_MAX);
+    g_assert_cmphex(i2c_value, ==, 0x9876);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VOUT_MARGIN_HIGH, 0xABCD);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_MARGIN_HIGH);
+    g_assert_cmphex(i2c_value, ==, 0xABCD);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VOUT_MARGIN_LOW, 0xA1B2);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_MARGIN_LOW);
+    g_assert_cmphex(i2c_value, ==, 0xA1B2);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VOUT_TRANSITION_RATE, 0xDEF1);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_TRANSITION_RATE);
+    g_assert_cmphex(i2c_value, ==, 0xDEF1);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VOUT_DROOP, 0x5678);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_DROOP);
+    g_assert_cmphex(i2c_value, ==, 0x5678);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VOUT_MIN, 0x1234);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_MIN);
+    g_assert_cmphex(i2c_value, ==, 0x1234);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VOUT_OV_FAULT_LIMIT, 0x2345);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_OV_FAULT_LIMIT);
+    g_assert_cmphex(i2c_value, ==, 0x2345);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VOUT_UV_FAULT_LIMIT, 0xFA12);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VOUT_UV_FAULT_LIMIT);
+    g_assert_cmphex(i2c_value, ==, 0xFA12);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_OT_FAULT_LIMIT, 0xF077);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_OT_FAULT_LIMIT);
+    g_assert_cmphex(i2c_value, ==, 0xF077);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_OT_WARN_LIMIT, 0x7137);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_OT_WARN_LIMIT);
+    g_assert_cmphex(i2c_value, ==, 0x7137);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VIN_OV_FAULT_LIMIT, 0x3456);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VIN_OV_FAULT_LIMIT);
+    g_assert_cmphex(i2c_value, ==, 0x3456);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VIN_UV_FAULT_LIMIT, 0xBADA);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_VIN_UV_FAULT_LIMIT);
+    g_assert_cmphex(i2c_value, ==, 0xBADA);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_IIN_OC_FAULT_LIMIT, 0xB1B0);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_IIN_OC_FAULT_LIMIT);
+    g_assert_cmphex(i2c_value, ==, 0xB1B0);
+
+    i2c_set8(i2cdev, PMBUS_OPERATION, 0xA);
+    i2c_value = i2c_get8(i2cdev, PMBUS_OPERATION);
+    g_assert_cmphex(i2c_value, ==, 0xA);
+
+    i2c_set8(i2cdev, PMBUS_ON_OFF_CONFIG, 0x42);
+    i2c_value = i2c_get8(i2cdev, PMBUS_ON_OFF_CONFIG);
+    g_assert_cmphex(i2c_value, ==, 0x42);
+}
+
+/* test that devices with multiple pages can switch between them */
+static void test_pages_rw(void *obj, void *data, QGuestAllocator *alloc)
+{
+    uint16_t i2c_value;
+    QI2CDevice *i2cdev = (QI2CDevice *)obj;
+
+    i2c_set8(i2cdev, PMBUS_PAGE, 1);
+    i2c_value = i2c_get8(i2cdev, PMBUS_PAGE);
+    g_assert_cmphex(i2c_value, ==, 1);
+
+    i2c_set8(i2cdev, PMBUS_PAGE, 0);
+    i2c_value = i2c_get8(i2cdev, PMBUS_PAGE);
+    g_assert_cmphex(i2c_value, ==, 0);
+}
+
+/* test read-only registers */
+static void test_ro_regs(void *obj, void *data, QGuestAllocator *alloc)
+{
+    uint16_t i2c_init_value, i2c_value;
+    QI2CDevice *i2cdev = (QI2CDevice *)obj;
+
+    i2c_init_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_VIN);
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_READ_VIN, 0xBEEF);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_VIN);
+    g_assert_cmphex(i2c_init_value, ==, i2c_value);
+
+    i2c_init_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_IIN);
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_READ_IIN, 0xB00F);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_IIN);
+    g_assert_cmphex(i2c_init_value, ==, i2c_value);
+
+    i2c_init_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_VOUT);
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_READ_VOUT, 0x1234);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_VOUT);
+    g_assert_cmphex(i2c_init_value, ==, i2c_value);
+
+    i2c_init_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_IOUT);
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_READ_IOUT, 0x6547);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_IOUT);
+    g_assert_cmphex(i2c_init_value, ==, i2c_value);
+
+    i2c_init_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_TEMPERATURE_1);
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_READ_TEMPERATURE_1, 0x1597);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_TEMPERATURE_1);
+    g_assert_cmphex(i2c_init_value, ==, i2c_value);
+
+    i2c_init_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_TEMPERATURE_2);
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_READ_TEMPERATURE_2, 0x1897);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_TEMPERATURE_2);
+    g_assert_cmphex(i2c_init_value, ==, i2c_value);
+
+    i2c_init_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_TEMPERATURE_3);
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_READ_TEMPERATURE_3, 0x1007);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_TEMPERATURE_3);
+    g_assert_cmphex(i2c_init_value, ==, i2c_value);
+
+    i2c_init_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_PIN);
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_READ_PIN, 0xDEAD);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_PIN);
+    g_assert_cmphex(i2c_init_value, ==, i2c_value);
+
+    i2c_init_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_POUT);
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_READ_POUT, 0xD00D);
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_READ_POUT);
+    g_assert_cmphex(i2c_init_value, ==, i2c_value);
+}
+
+/* test voltage fault handling */
+static void test_voltage_faults(void *obj, void *data, QGuestAllocator *alloc)
+{
+    uint16_t i2c_value;
+    uint8_t i2c_byte;
+    QI2CDevice *i2cdev = (QI2CDevice *)obj;
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VOUT_OV_WARN_LIMIT, 5000);
+    qmp_isl_pmbus_set(TEST_ID, "vout[0]", 5100);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_STATUS_WORD);
+    i2c_byte = i2c_get8(i2cdev, PMBUS_STATUS_VOUT);
+    g_assert_true((i2c_value & PB_STATUS_VOUT) != 0);
+    g_assert_true((i2c_byte & PB_STATUS_VOUT_OV_WARN) != 0);
+
+    qmp_isl_pmbus_set(TEST_ID, "vout[0]", 4500);
+    i2c_set8(i2cdev, PMBUS_CLEAR_FAULTS, 0);
+    i2c_byte = i2c_get8(i2cdev, PMBUS_STATUS_VOUT);
+    g_assert_true((i2c_byte & PB_STATUS_VOUT_OV_WARN) == 0);
+
+    isl_pmbus_i2c_set16(i2cdev, PMBUS_VOUT_UV_WARN_LIMIT, 4600);
+
+    i2c_value = isl_pmbus_i2c_get16(i2cdev, PMBUS_STATUS_WORD);
+    i2c_byte = i2c_get8(i2cdev, PMBUS_STATUS_VOUT);
+    g_assert_true((i2c_value & PB_STATUS_VOUT) != 0);
+    g_assert_true((i2c_byte & PB_STATUS_VOUT_UV_WARN) != 0);
+
+}
+
+static void isl_pmbus_register_nodes(void)
+{
+    QOSGraphEdgeOptions opts = {
+        .extra_device_opts = "id=" TEST_ID ",address=0x43"
+    };
+    add_qi2c_address(&opts, &(QI2CAddress) { TEST_ADDR });
+
+    qos_node_create_driver("isl69260", i2c_device_create);
+    qos_node_consumes("isl69260", "i2c-bus", &opts);
+
+    qos_add_test("test_defaults", "isl69260", test_defaults, NULL);
+    qos_add_test("test_tx_rx", "isl69260", test_tx_rx, NULL);
+    qos_add_test("test_rw_regs", "isl69260", test_rw_regs, NULL);
+    qos_add_test("test_pages_rw", "isl69260", test_pages_rw, NULL);
+    qos_add_test("test_ro_regs", "isl69260", test_ro_regs, NULL);
+    qos_add_test("test_ov_faults", "isl69260", test_voltage_faults, NULL);
+}
+libqos_init(isl_pmbus_register_nodes);
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index f33d84d19b..9a6cc93c16 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -244,6 +244,7 @@ qos_test_ss.add(
   'es1370-test.c',
   'ipoctal232-test.c',
   'lsm303dlhc-mag-test.c',
+  'isl_pmbus-test.c',
   'max34451-test.c',
   'megasas-test.c',
   'ne2000-test.c',
