@@ -50,19 +50,15 @@ static const MemoryRegionPortio ide_portio2_list[] = {
PORTIO_END_OF_LIST(),
};
-int ide_init_ioport(IDEBus *bus, ISADevice *dev, int iobase, int iobase2)
+void ide_init_ioport(IDEBus *bus, ISADevice *dev, int iobase, int iobase2)
{
- int ret;
-
/* ??? Assume only ISA and PCI configurations, and that the PCI-ISA
bridge has been setup properly to always register with ISA. */
- ret = isa_register_portio_list(dev, &bus->portio_list,
- iobase, ide_portio_list, bus, "ide");
+ isa_register_portio_list(dev, &bus->portio_list,
+ iobase, ide_portio_list, bus, "ide");
- if (ret == 0 && iobase2) {
- ret = isa_register_portio_list(dev, &bus->portio2_list,
- iobase2, ide_portio2_list, bus, "ide");
+ if (iobase2) {
+ isa_register_portio_list(dev, &bus->portio2_list,
+ iobase2, ide_portio2_list, bus, "ide");
}
-
- return ret;
}
@@ -134,7 +134,7 @@ static int pci_piix_init_ports(PCIIDEState *d)
{0x1f0, 0x3f6, 14},
{0x170, 0x376, 15},
};
- int i, ret;
+ int i;
{
ISABus *isa_bus;
@@ -149,11 +149,8 @@ static int pci_piix_init_ports(PCIIDEState *d)
for (i = 0; i < 2; i++) {
ide_bus_init(&d->bus[i], sizeof(d->bus[i]), DEVICE(d), i, 2);
- ret = ide_init_ioport(&d->bus[i], NULL, port_info[i].iobase,
- port_info[i].iobase2);
- if (ret) {
- return ret;
- }
+ ide_init_ioport(&d->bus[i], NULL, port_info[i].iobase,
+ port_info[i].iobase2);
ide_init2(&d->bus[i], isa_get_irq(NULL, port_info[i].isairq));
bmdma_init(&d->bus[i], &d->bmdma[i], d);
@@ -119,17 +119,13 @@ void isa_register_ioport(ISADevice *dev, MemoryRegion *io, uint16_t start)
isa_init_ioport(dev, start);
}
-int isa_register_portio_list(ISADevice *dev,
- PortioList *piolist, uint16_t start,
- const MemoryRegionPortio *pio_start,
- void *opaque, const char *name)
+void isa_register_portio_list(ISADevice *dev,
+ PortioList *piolist, uint16_t start,
+ const MemoryRegionPortio *pio_start,
+ void *opaque, const char *name)
{
assert(piolist && !piolist->owner);
- if (!isabus) {
- return -ENODEV;
- }
-
/* START is how we should treat DEV, regardless of the actual
contents of the portio array. This is how the old code
actually handled e.g. the FDC device. */
@@ -137,8 +133,6 @@ int isa_register_portio_list(ISADevice *dev,
portio_list_init(piolist, OBJECT(dev), pio_start, opaque, name);
portio_list_add(piolist, isabus->address_space_io, start);
-
- return 0;
}
ISADevice *isa_new(const char *name)
@@ -624,7 +624,7 @@ int ide_init_drive(IDEState *s, BlockBackend *blk, IDEDriveKind kind,
int chs_trans, Error **errp);
void ide_init2(IDEBus *bus, qemu_irq irq);
void ide_exit(IDEState *s);
-int ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2);
+void ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2);
void ide_register_restart_cb(IDEBus *bus);
void ide_exec_cmd(IDEBus *bus, uint32_t val);
@@ -114,15 +114,12 @@ void isa_register_ioport(ISADevice *dev, MemoryRegion *io, uint16_t start);
* @portio: the ports, sorted by offset.
* @opaque: passed into the portio callbacks.
* @name: passed into memory_region_init_io.
- *
- * Returns: 0 on success, negative error code otherwise (e.g. if the
- * ISA bus is not available)
*/
-int isa_register_portio_list(ISADevice *dev,
- PortioList *piolist,
- uint16_t start,
- const MemoryRegionPortio *portio,
- void *opaque, const char *name);
+void isa_register_portio_list(ISADevice *dev,
+ PortioList *piolist,
+ uint16_t start,
+ const MemoryRegionPortio *portio,
+ void *opaque, const char *name);
static inline ISABus *isa_bus_from_device(ISADevice *d)
{
Now that the PIIX IDE device models check for presence of an ISABus before using it, this fix isn't needed any longer. This reverts commit 9405d87be25db6dff4d7b5ab48a81bbf6d083e47. Signed-off-by: Bernhard Beschow <shentey@gmail.com> --- hw/ide/ioport.c | 16 ++++++---------- hw/ide/piix.c | 9 +++------ hw/isa/isa-bus.c | 14 ++++---------- include/hw/ide/internal.h | 2 +- include/hw/isa/isa.h | 13 +++++-------- 5 files changed, 19 insertions(+), 35 deletions(-)