| Message ID | 20221004130138.2299307-27-alex.bennee@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [PULL,01/54] scripts/ci/setup: ninja missing from build-environment | expand |
On Tue, Oct 04, 2022 at 02:01:10PM +0100, Alex Bennée wrote: > From: Paolo Bonzini <pbonzini@redhat.com> > > Let write_target_makefile handle both host and container cross compilers. > > Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> > Signed-off-by: Alex Bennée <alex.bennee@linaro.org> > Message-Id: <20220929114231.583801-27-alex.bennee@linaro.org> I think this commit breaks bisection: configure: line 2498: syntax error near unexpected token `(' configure: line 2498: ` echo "run-tcg-tests-$target: $qemu\$(EXESUF)" >> Makefile.prereqs' It has already been merged into qemu.git/master, so there's no fixing it now. I wanted to leave a comment in case someone hits this problem in the future and wonders what's going on. I had to use git bisect skip. Stefan > > diff --git a/configure b/configure > index cbeac99b2b..8b495d4453 100755 > --- a/configure > +++ b/configure > @@ -2157,51 +2157,49 @@ probe_target_compiler() { > > write_target_makefile() { > echo "EXTRA_CFLAGS=$target_cflags" > - if test -n "$target_cc"; then > - echo "CC=$target_cc" > - echo "CCAS=$target_ccas" > - fi > - if test -n "$target_ar"; then > - echo "AR=$target_ar" > - fi > - if test -n "$target_as"; then > - echo "AS=$target_as" > - fi > - if test -n "$target_ld"; then > - echo "LD=$target_ld" > - fi > - if test -n "$target_nm"; then > - echo "NM=$target_nm" > - fi > - if test -n "$target_objcopy"; then > - echo "OBJCOPY=$target_objcopy" > - fi > - if test -n "$target_ranlib"; then > - echo "RANLIB=$target_ranlib" > - fi > - if test -n "$target_strip"; then > - echo "STRIP=$target_strip" > - fi > -} > - > -write_container_target_makefile() { > - echo "$1: docker-image-$container_image" >> Makefile.prereqs > - echo "EXTRA_CFLAGS=$target_cflags" > - if test -n "$container_cross_cc"; then > - echo "CC=$docker_py cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" > - echo "CCAS=$docker_py cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" > + if test -z "$target_cc" && test -z "$target_as"; then > + test -z "$container_image" && error_exit "Internal error: could not find cross compiler for $1?" > + echo "$1: docker-image-$container_image" >> Makefile.prereqs > + if test -n "$container_cross_cc"; then > + echo "CC=$docker_py cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" > + echo "CCAS=$docker_py cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" > + fi > + echo "AR=$docker_py cc --cc $container_cross_ar -i qemu/$container_image -s $source_path --" > + echo "AS=$docker_py cc --cc $container_cross_as -i qemu/$container_image -s $source_path --" > + echo "LD=$docker_py cc --cc $container_cross_ld -i qemu/$container_image -s $source_path --" > + echo "NM=$docker_py cc --cc $container_cross_nm -i qemu/$container_image -s $source_path --" > + echo "OBJCOPY=$docker_py cc --cc $container_cross_objcopy -i qemu/$container_image -s $source_path --" > + echo "RANLIB=$docker_py cc --cc $container_cross_ranlib -i qemu/$container_image -s $source_path --" > + echo "STRIP=$docker_py cc --cc $container_cross_strip -i qemu/$container_image -s $source_path --" > + else > + if test -n "$target_cc"; then > + echo "CC=$target_cc" > + echo "CCAS=$target_ccas" > + fi > + if test -n "$target_ar"; then > + echo "AR=$target_ar" > + fi > + if test -n "$target_as"; then > + echo "AS=$target_as" > + fi > + if test -n "$target_ld"; then > + echo "LD=$target_ld" > + fi > + if test -n "$target_nm"; then > + echo "NM=$target_nm" > + fi > + if test -n "$target_objcopy"; then > + echo "OBJCOPY=$target_objcopy" > + fi > + if test -n "$target_ranlib"; then > + echo "RANLIB=$target_ranlib" > + fi > + if test -n "$target_strip"; then > + echo "STRIP=$target_strip" > + fi > fi > - echo "AR=$docker_py cc --cc $container_cross_ar -i qemu/$container_image -s $source_path --" > - echo "AS=$docker_py cc --cc $container_cross_as -i qemu/$container_image -s $source_path --" > - echo "LD=$docker_py cc --cc $container_cross_ld -i qemu/$container_image -s $source_path --" > - echo "NM=$docker_py cc --cc $container_cross_nm -i qemu/$container_image -s $source_path --" > - echo "OBJCOPY=$docker_py cc --cc $container_cross_objcopy -i qemu/$container_image -s $source_path --" > - echo "RANLIB=$docker_py cc --cc $container_cross_ranlib -i qemu/$container_image -s $source_path --" > - echo "STRIP=$docker_py cc --cc $container_cross_strip -i qemu/$container_image -s $source_path --" > } > > - > - > ########################################## > # check for vfio_user_server > > @@ -2560,15 +2558,9 @@ for target in $target_list; do > ;; > esac > > - probe_target_compiler $target > - if test $got_cross_cc = yes; then > - write_target_makefile >> "$config_target_mak" > - elif test -n "$container_image"; then > - build_static=y > - write_container_target_makefile build-tcg-tests-$target >> "$config_target_mak" > - got_cross_cc=yes > - fi > - if test $got_cross_cc = yes; then > + if probe_target_compiler $target || test -n "$container_image"; then > + test -n "$container_image" && build_static=y > + write_target_makefile "build-tcg-tests-$target >> "$config_target_mak" > mkdir -p "tests/tcg/$target" > ln -sf "$source_path/tests/tcg/Makefile.target" "tests/tcg/$target/Makefile" > ln -sf "../config-$target.mak" "tests/tcg/$target/config-target.mak" > -- > 2.34.1 >
diff --git a/configure b/configure index cbeac99b2b..8b495d4453 100755 --- a/configure +++ b/configure @@ -2157,51 +2157,49 @@ probe_target_compiler() { write_target_makefile() { echo "EXTRA_CFLAGS=$target_cflags" - if test -n "$target_cc"; then - echo "CC=$target_cc" - echo "CCAS=$target_ccas" - fi - if test -n "$target_ar"; then - echo "AR=$target_ar" - fi - if test -n "$target_as"; then - echo "AS=$target_as" - fi - if test -n "$target_ld"; then - echo "LD=$target_ld" - fi - if test -n "$target_nm"; then - echo "NM=$target_nm" - fi - if test -n "$target_objcopy"; then - echo "OBJCOPY=$target_objcopy" - fi - if test -n "$target_ranlib"; then - echo "RANLIB=$target_ranlib" - fi - if test -n "$target_strip"; then - echo "STRIP=$target_strip" - fi -} - -write_container_target_makefile() { - echo "$1: docker-image-$container_image" >> Makefile.prereqs - echo "EXTRA_CFLAGS=$target_cflags" - if test -n "$container_cross_cc"; then - echo "CC=$docker_py cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" - echo "CCAS=$docker_py cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" + if test -z "$target_cc" && test -z "$target_as"; then + test -z "$container_image" && error_exit "Internal error: could not find cross compiler for $1?" + echo "$1: docker-image-$container_image" >> Makefile.prereqs + if test -n "$container_cross_cc"; then + echo "CC=$docker_py cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" + echo "CCAS=$docker_py cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" + fi + echo "AR=$docker_py cc --cc $container_cross_ar -i qemu/$container_image -s $source_path --" + echo "AS=$docker_py cc --cc $container_cross_as -i qemu/$container_image -s $source_path --" + echo "LD=$docker_py cc --cc $container_cross_ld -i qemu/$container_image -s $source_path --" + echo "NM=$docker_py cc --cc $container_cross_nm -i qemu/$container_image -s $source_path --" + echo "OBJCOPY=$docker_py cc --cc $container_cross_objcopy -i qemu/$container_image -s $source_path --" + echo "RANLIB=$docker_py cc --cc $container_cross_ranlib -i qemu/$container_image -s $source_path --" + echo "STRIP=$docker_py cc --cc $container_cross_strip -i qemu/$container_image -s $source_path --" + else + if test -n "$target_cc"; then + echo "CC=$target_cc" + echo "CCAS=$target_ccas" + fi + if test -n "$target_ar"; then + echo "AR=$target_ar" + fi + if test -n "$target_as"; then + echo "AS=$target_as" + fi + if test -n "$target_ld"; then + echo "LD=$target_ld" + fi + if test -n "$target_nm"; then + echo "NM=$target_nm" + fi + if test -n "$target_objcopy"; then + echo "OBJCOPY=$target_objcopy" + fi + if test -n "$target_ranlib"; then + echo "RANLIB=$target_ranlib" + fi + if test -n "$target_strip"; then + echo "STRIP=$target_strip" + fi fi - echo "AR=$docker_py cc --cc $container_cross_ar -i qemu/$container_image -s $source_path --" - echo "AS=$docker_py cc --cc $container_cross_as -i qemu/$container_image -s $source_path --" - echo "LD=$docker_py cc --cc $container_cross_ld -i qemu/$container_image -s $source_path --" - echo "NM=$docker_py cc --cc $container_cross_nm -i qemu/$container_image -s $source_path --" - echo "OBJCOPY=$docker_py cc --cc $container_cross_objcopy -i qemu/$container_image -s $source_path --" - echo "RANLIB=$docker_py cc --cc $container_cross_ranlib -i qemu/$container_image -s $source_path --" - echo "STRIP=$docker_py cc --cc $container_cross_strip -i qemu/$container_image -s $source_path --" } - - ########################################## # check for vfio_user_server @@ -2560,15 +2558,9 @@ for target in $target_list; do ;; esac - probe_target_compiler $target - if test $got_cross_cc = yes; then - write_target_makefile >> "$config_target_mak" - elif test -n "$container_image"; then - build_static=y - write_container_target_makefile build-tcg-tests-$target >> "$config_target_mak" - got_cross_cc=yes - fi - if test $got_cross_cc = yes; then + if probe_target_compiler $target || test -n "$container_image"; then + test -n "$container_image" && build_static=y + write_target_makefile "build-tcg-tests-$target >> "$config_target_mak" mkdir -p "tests/tcg/$target" ln -sf "$source_path/tests/tcg/Makefile.target" "tests/tcg/$target/Makefile" ln -sf "../config-$target.mak" "tests/tcg/$target/config-target.mak"