diff mbox series

[v7,07/17] hw/nvme: Omit errp for pci_add_capability

Message ID 20221101005859.4198-8-akihiko.odaki@daynix.com (mailing list archive)
State New, archived
Headers show
Series pci: Abort if pci_add_capability fails | expand

Commit Message

Akihiko Odaki Nov. 1, 2022, 12:58 a.m. UTC 
Omitting errp for pci_add_capability() causes it to abort if
capabilities overlap. This behavior is appropriate here because all of
the capabilities set in this device are defined in the program and
their overlap should not happen unless there is a programming error.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
---
 hw/nvme/ctrl.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index 87aeba0564..ff4e2beea6 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -7325,17 +7325,9 @@  static void nvme_init_sriov(NvmeCtrl *n, PCIDevice *pci_dev, uint16_t offset)
                               PCI_BASE_ADDRESS_MEM_TYPE_64, bar_size);
 }
 
-static int nvme_add_pm_capability(PCIDevice *pci_dev, uint8_t offset)
+static void nvme_add_pm_capability(PCIDevice *pci_dev, uint8_t offset)
 {
-    Error *err = NULL;
-    int ret;
-
-    ret = pci_add_capability(pci_dev, PCI_CAP_ID_PM, offset,
-                             PCI_PM_SIZEOF, &err);
-    if (err) {
-        error_report_err(err);
-        return ret;
-    }
+    pci_add_capability(pci_dev, PCI_CAP_ID_PM, offset, PCI_PM_SIZEOF);
 
     pci_set_word(pci_dev->config + offset + PCI_PM_PMC,
                  PCI_PM_CAP_VER_1_2);
@@ -7343,8 +7335,6 @@  static int nvme_add_pm_capability(PCIDevice *pci_dev, uint8_t offset)
                  PCI_PM_CTRL_NO_SOFT_RESET);
     pci_set_word(pci_dev->wmask + offset + PCI_PM_CTRL,
                  PCI_PM_CTRL_STATE_MASK);
-
-    return 0;
 }
 
 static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)