Message ID | 20221213111707.34921-5-philmd@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | hw/virtio: Split ioconfig / qmp code from virtio.c | expand |
On 12/13/22 06:17, Philippe Mathieu-Daudé wrote: > These arrays are only accessed read-only, move them to .rodata. > > Signed-off-by: Philippe Mathieu-Daudé<philmd@linaro.org> > --- > hw/virtio/virtio.c | 34 +++++++++++++++++----------------- > 1 file changed, 17 insertions(+), 17 deletions(-) > > diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c > index b35480be8f..f2298bb437 100644 > --- a/hw/virtio/virtio.c > +++ b/hw/virtio/virtio.c > @@ -80,7 +80,7 @@ enum VhostUserProtocolFeature { > }; > > /* Virtio transport features mapping */ > -static qmp_virtio_feature_map_t virtio_transport_map[] = { > +static const qmp_virtio_feature_map_t virtio_transport_map[] = { > /* Virtio device transport features */ > #ifndef VIRTIO_CONFIG_NO_LEGACY > FEATURE_ENTRY(VIRTIO_F_NOTIFY_ON_EMPTY, \ > @@ -111,7 +111,7 @@ static qmp_virtio_feature_map_t virtio_transport_map[] = { > }; > > /* Vhost-user protocol features mapping */ > -static qmp_virtio_feature_map_t vhost_user_protocol_map[] = { > +static const qmp_virtio_feature_map_t vhost_user_protocol_map[] = { > FEATURE_ENTRY(VHOST_USER_PROTOCOL_F_MQ, \ > "VHOST_USER_PROTOCOL_F_MQ: Multiqueue protocol supported"), > FEATURE_ENTRY(VHOST_USER_PROTOCOL_F_LOG_SHMFD, \ > @@ -161,7 +161,7 @@ static qmp_virtio_feature_map_t vhost_user_protocol_map[] = { > }; > > /* virtio device configuration statuses */ > -static qmp_virtio_feature_map_t virtio_config_status_map[] = { > +static const qmp_virtio_feature_map_t virtio_config_status_map[] = { > FEATURE_ENTRY(VIRTIO_CONFIG_S_DRIVER_OK, \ > "VIRTIO_CONFIG_S_DRIVER_OK: Driver setup and ready"), > FEATURE_ENTRY(VIRTIO_CONFIG_S_FEATURES_OK, \ > @@ -180,7 +180,7 @@ static qmp_virtio_feature_map_t virtio_config_status_map[] = { > > /* virtio-blk features mapping */ > #ifdef CONFIG_VIRTIO_BLK > -static qmp_virtio_feature_map_t virtio_blk_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_blk_feature_map[] = { > FEATURE_ENTRY(VIRTIO_BLK_F_SIZE_MAX, \ > "VIRTIO_BLK_F_SIZE_MAX: Max segment size is size_max"), > FEATURE_ENTRY(VIRTIO_BLK_F_SEG_MAX, \ > @@ -221,7 +221,7 @@ static qmp_virtio_feature_map_t virtio_blk_feature_map[] = { > > /* virtio-serial features mapping */ > #ifdef CONFIG_VIRTIO_SERIAL > -static qmp_virtio_feature_map_t virtio_serial_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_serial_feature_map[] = { > FEATURE_ENTRY(VIRTIO_CONSOLE_F_SIZE, \ > "VIRTIO_CONSOLE_F_SIZE: Host providing console size"), > FEATURE_ENTRY(VIRTIO_CONSOLE_F_MULTIPORT, \ > @@ -234,7 +234,7 @@ static qmp_virtio_feature_map_t virtio_serial_feature_map[] = { > > /* virtio-gpu features mapping */ > #ifdef CONFIG_VIRTIO_GPU > -static qmp_virtio_feature_map_t virtio_gpu_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_gpu_feature_map[] = { > FEATURE_ENTRY(VIRTIO_GPU_F_VIRGL, \ > "VIRTIO_GPU_F_VIRGL: Virgl 3D mode supported"), > FEATURE_ENTRY(VIRTIO_GPU_F_EDID, \ > @@ -257,7 +257,7 @@ static qmp_virtio_feature_map_t virtio_gpu_feature_map[] = { > > /* virtio-input features mapping */ > #ifdef CONFIG_VIRTIO_INPUT > -static qmp_virtio_feature_map_t virtio_input_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_input_feature_map[] = { > FEATURE_ENTRY(VHOST_F_LOG_ALL, \ > "VHOST_F_LOG_ALL: Logging write descriptors supported"), > FEATURE_ENTRY(VHOST_USER_F_PROTOCOL_FEATURES, \ > @@ -269,7 +269,7 @@ static qmp_virtio_feature_map_t virtio_input_feature_map[] = { > > /* virtio-net features mapping */ > #ifdef CONFIG_VIRTIO_NET > -static qmp_virtio_feature_map_t virtio_net_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_net_feature_map[] = { > FEATURE_ENTRY(VIRTIO_NET_F_CSUM, \ > "VIRTIO_NET_F_CSUM: Device handling packets with partial checksum " > "supported"), > @@ -349,7 +349,7 @@ static qmp_virtio_feature_map_t virtio_net_feature_map[] = { > > /* virtio-scsi features mapping */ > #ifdef CONFIG_VIRTIO_SCSI > -static qmp_virtio_feature_map_t virtio_scsi_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_scsi_feature_map[] = { > FEATURE_ENTRY(VIRTIO_SCSI_F_INOUT, \ > "VIRTIO_SCSI_F_INOUT: Requests including read and writable data " > "buffers suppoted"), > @@ -372,7 +372,7 @@ static qmp_virtio_feature_map_t virtio_scsi_feature_map[] = { > > /* virtio/vhost-user-fs features mapping */ > #ifdef CONFIG_VHOST_USER_FS > -static qmp_virtio_feature_map_t virtio_fs_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_fs_feature_map[] = { > FEATURE_ENTRY(VHOST_F_LOG_ALL, \ > "VHOST_F_LOG_ALL: Logging write descriptors supported"), > FEATURE_ENTRY(VHOST_USER_F_PROTOCOL_FEATURES, \ > @@ -384,7 +384,7 @@ static qmp_virtio_feature_map_t virtio_fs_feature_map[] = { > > /* virtio/vhost-user-i2c features mapping */ > #ifdef CONFIG_VIRTIO_I2C_ADAPTER > -static qmp_virtio_feature_map_t virtio_i2c_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_i2c_feature_map[] = { > FEATURE_ENTRY(VIRTIO_I2C_F_ZERO_LENGTH_REQUEST, \ > "VIRTIO_I2C_F_ZERO_LEGNTH_REQUEST: Zero length requests supported"), > FEATURE_ENTRY(VHOST_F_LOG_ALL, \ > @@ -398,7 +398,7 @@ static qmp_virtio_feature_map_t virtio_i2c_feature_map[] = { > > /* virtio/vhost-vsock features mapping */ > #ifdef CONFIG_VHOST_VSOCK > -static qmp_virtio_feature_map_t virtio_vsock_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_vsock_feature_map[] = { > FEATURE_ENTRY(VIRTIO_VSOCK_F_SEQPACKET, \ > "VIRTIO_VSOCK_F_SEQPACKET: SOCK_SEQPACKET supported"), > FEATURE_ENTRY(VHOST_F_LOG_ALL, \ > @@ -412,7 +412,7 @@ static qmp_virtio_feature_map_t virtio_vsock_feature_map[] = { > > /* virtio-balloon features mapping */ > #ifdef CONFIG_VIRTIO_BALLOON > -static qmp_virtio_feature_map_t virtio_balloon_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_balloon_feature_map[] = { > FEATURE_ENTRY(VIRTIO_BALLOON_F_MUST_TELL_HOST, \ > "VIRTIO_BALLOON_F_MUST_TELL_HOST: Tell host before reclaiming " > "pages"), > @@ -432,7 +432,7 @@ static qmp_virtio_feature_map_t virtio_balloon_feature_map[] = { > > /* virtio-crypto features mapping */ > #ifdef CONFIG_VIRTIO_CRYPTO > -static qmp_virtio_feature_map_t virtio_crypto_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_crypto_feature_map[] = { > FEATURE_ENTRY(VHOST_F_LOG_ALL, \ > "VHOST_F_LOG_ALL: Logging write descriptors supported"), > { -1, "" } > @@ -441,7 +441,7 @@ static qmp_virtio_feature_map_t virtio_crypto_feature_map[] = { > > /* virtio-iommu features mapping */ > #ifdef CONFIG_VIRTIO_IOMMU > -static qmp_virtio_feature_map_t virtio_iommu_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_iommu_feature_map[] = { > FEATURE_ENTRY(VIRTIO_IOMMU_F_INPUT_RANGE, \ > "VIRTIO_IOMMU_F_INPUT_RANGE: Range of available virtual addrs. " > "available"), > @@ -466,7 +466,7 @@ static qmp_virtio_feature_map_t virtio_iommu_feature_map[] = { > > /* virtio-mem features mapping */ > #ifdef CONFIG_VIRTIO_MEM > -static qmp_virtio_feature_map_t virtio_mem_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_mem_feature_map[] = { > #ifndef CONFIG_ACPI > FEATURE_ENTRY(VIRTIO_MEM_F_ACPI_PXM, \ > "VIRTIO_MEM_F_ACPI_PXM: node_id is an ACPI PXM and is valid"), > @@ -480,7 +480,7 @@ static qmp_virtio_feature_map_t virtio_mem_feature_map[] = { > > /* virtio-rng features mapping */ > #ifdef CONFIG_VIRTIO_RNG > -static qmp_virtio_feature_map_t virtio_rng_feature_map[] = { > +static const qmp_virtio_feature_map_t virtio_rng_feature_map[] = { > FEATURE_ENTRY(VHOST_F_LOG_ALL, \ > "VHOST_F_LOG_ALL: Logging write descriptors supported"), > FEATURE_ENTRY(VHOST_USER_F_PROTOCOL_FEATURES, \ Also a good catch. These maps should not change after being initialized, since they're just definitions. Adding const here appears to be appropriate. Reviewed-by: Jonah Palmer<jonah.palmer@oracle.com>
diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c index b35480be8f..f2298bb437 100644 --- a/hw/virtio/virtio.c +++ b/hw/virtio/virtio.c @@ -80,7 +80,7 @@ enum VhostUserProtocolFeature { }; /* Virtio transport features mapping */ -static qmp_virtio_feature_map_t virtio_transport_map[] = { +static const qmp_virtio_feature_map_t virtio_transport_map[] = { /* Virtio device transport features */ #ifndef VIRTIO_CONFIG_NO_LEGACY FEATURE_ENTRY(VIRTIO_F_NOTIFY_ON_EMPTY, \ @@ -111,7 +111,7 @@ static qmp_virtio_feature_map_t virtio_transport_map[] = { }; /* Vhost-user protocol features mapping */ -static qmp_virtio_feature_map_t vhost_user_protocol_map[] = { +static const qmp_virtio_feature_map_t vhost_user_protocol_map[] = { FEATURE_ENTRY(VHOST_USER_PROTOCOL_F_MQ, \ "VHOST_USER_PROTOCOL_F_MQ: Multiqueue protocol supported"), FEATURE_ENTRY(VHOST_USER_PROTOCOL_F_LOG_SHMFD, \ @@ -161,7 +161,7 @@ static qmp_virtio_feature_map_t vhost_user_protocol_map[] = { }; /* virtio device configuration statuses */ -static qmp_virtio_feature_map_t virtio_config_status_map[] = { +static const qmp_virtio_feature_map_t virtio_config_status_map[] = { FEATURE_ENTRY(VIRTIO_CONFIG_S_DRIVER_OK, \ "VIRTIO_CONFIG_S_DRIVER_OK: Driver setup and ready"), FEATURE_ENTRY(VIRTIO_CONFIG_S_FEATURES_OK, \ @@ -180,7 +180,7 @@ static qmp_virtio_feature_map_t virtio_config_status_map[] = { /* virtio-blk features mapping */ #ifdef CONFIG_VIRTIO_BLK -static qmp_virtio_feature_map_t virtio_blk_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_blk_feature_map[] = { FEATURE_ENTRY(VIRTIO_BLK_F_SIZE_MAX, \ "VIRTIO_BLK_F_SIZE_MAX: Max segment size is size_max"), FEATURE_ENTRY(VIRTIO_BLK_F_SEG_MAX, \ @@ -221,7 +221,7 @@ static qmp_virtio_feature_map_t virtio_blk_feature_map[] = { /* virtio-serial features mapping */ #ifdef CONFIG_VIRTIO_SERIAL -static qmp_virtio_feature_map_t virtio_serial_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_serial_feature_map[] = { FEATURE_ENTRY(VIRTIO_CONSOLE_F_SIZE, \ "VIRTIO_CONSOLE_F_SIZE: Host providing console size"), FEATURE_ENTRY(VIRTIO_CONSOLE_F_MULTIPORT, \ @@ -234,7 +234,7 @@ static qmp_virtio_feature_map_t virtio_serial_feature_map[] = { /* virtio-gpu features mapping */ #ifdef CONFIG_VIRTIO_GPU -static qmp_virtio_feature_map_t virtio_gpu_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_gpu_feature_map[] = { FEATURE_ENTRY(VIRTIO_GPU_F_VIRGL, \ "VIRTIO_GPU_F_VIRGL: Virgl 3D mode supported"), FEATURE_ENTRY(VIRTIO_GPU_F_EDID, \ @@ -257,7 +257,7 @@ static qmp_virtio_feature_map_t virtio_gpu_feature_map[] = { /* virtio-input features mapping */ #ifdef CONFIG_VIRTIO_INPUT -static qmp_virtio_feature_map_t virtio_input_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_input_feature_map[] = { FEATURE_ENTRY(VHOST_F_LOG_ALL, \ "VHOST_F_LOG_ALL: Logging write descriptors supported"), FEATURE_ENTRY(VHOST_USER_F_PROTOCOL_FEATURES, \ @@ -269,7 +269,7 @@ static qmp_virtio_feature_map_t virtio_input_feature_map[] = { /* virtio-net features mapping */ #ifdef CONFIG_VIRTIO_NET -static qmp_virtio_feature_map_t virtio_net_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_net_feature_map[] = { FEATURE_ENTRY(VIRTIO_NET_F_CSUM, \ "VIRTIO_NET_F_CSUM: Device handling packets with partial checksum " "supported"), @@ -349,7 +349,7 @@ static qmp_virtio_feature_map_t virtio_net_feature_map[] = { /* virtio-scsi features mapping */ #ifdef CONFIG_VIRTIO_SCSI -static qmp_virtio_feature_map_t virtio_scsi_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_scsi_feature_map[] = { FEATURE_ENTRY(VIRTIO_SCSI_F_INOUT, \ "VIRTIO_SCSI_F_INOUT: Requests including read and writable data " "buffers suppoted"), @@ -372,7 +372,7 @@ static qmp_virtio_feature_map_t virtio_scsi_feature_map[] = { /* virtio/vhost-user-fs features mapping */ #ifdef CONFIG_VHOST_USER_FS -static qmp_virtio_feature_map_t virtio_fs_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_fs_feature_map[] = { FEATURE_ENTRY(VHOST_F_LOG_ALL, \ "VHOST_F_LOG_ALL: Logging write descriptors supported"), FEATURE_ENTRY(VHOST_USER_F_PROTOCOL_FEATURES, \ @@ -384,7 +384,7 @@ static qmp_virtio_feature_map_t virtio_fs_feature_map[] = { /* virtio/vhost-user-i2c features mapping */ #ifdef CONFIG_VIRTIO_I2C_ADAPTER -static qmp_virtio_feature_map_t virtio_i2c_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_i2c_feature_map[] = { FEATURE_ENTRY(VIRTIO_I2C_F_ZERO_LENGTH_REQUEST, \ "VIRTIO_I2C_F_ZERO_LEGNTH_REQUEST: Zero length requests supported"), FEATURE_ENTRY(VHOST_F_LOG_ALL, \ @@ -398,7 +398,7 @@ static qmp_virtio_feature_map_t virtio_i2c_feature_map[] = { /* virtio/vhost-vsock features mapping */ #ifdef CONFIG_VHOST_VSOCK -static qmp_virtio_feature_map_t virtio_vsock_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_vsock_feature_map[] = { FEATURE_ENTRY(VIRTIO_VSOCK_F_SEQPACKET, \ "VIRTIO_VSOCK_F_SEQPACKET: SOCK_SEQPACKET supported"), FEATURE_ENTRY(VHOST_F_LOG_ALL, \ @@ -412,7 +412,7 @@ static qmp_virtio_feature_map_t virtio_vsock_feature_map[] = { /* virtio-balloon features mapping */ #ifdef CONFIG_VIRTIO_BALLOON -static qmp_virtio_feature_map_t virtio_balloon_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_balloon_feature_map[] = { FEATURE_ENTRY(VIRTIO_BALLOON_F_MUST_TELL_HOST, \ "VIRTIO_BALLOON_F_MUST_TELL_HOST: Tell host before reclaiming " "pages"), @@ -432,7 +432,7 @@ static qmp_virtio_feature_map_t virtio_balloon_feature_map[] = { /* virtio-crypto features mapping */ #ifdef CONFIG_VIRTIO_CRYPTO -static qmp_virtio_feature_map_t virtio_crypto_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_crypto_feature_map[] = { FEATURE_ENTRY(VHOST_F_LOG_ALL, \ "VHOST_F_LOG_ALL: Logging write descriptors supported"), { -1, "" } @@ -441,7 +441,7 @@ static qmp_virtio_feature_map_t virtio_crypto_feature_map[] = { /* virtio-iommu features mapping */ #ifdef CONFIG_VIRTIO_IOMMU -static qmp_virtio_feature_map_t virtio_iommu_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_iommu_feature_map[] = { FEATURE_ENTRY(VIRTIO_IOMMU_F_INPUT_RANGE, \ "VIRTIO_IOMMU_F_INPUT_RANGE: Range of available virtual addrs. " "available"), @@ -466,7 +466,7 @@ static qmp_virtio_feature_map_t virtio_iommu_feature_map[] = { /* virtio-mem features mapping */ #ifdef CONFIG_VIRTIO_MEM -static qmp_virtio_feature_map_t virtio_mem_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_mem_feature_map[] = { #ifndef CONFIG_ACPI FEATURE_ENTRY(VIRTIO_MEM_F_ACPI_PXM, \ "VIRTIO_MEM_F_ACPI_PXM: node_id is an ACPI PXM and is valid"), @@ -480,7 +480,7 @@ static qmp_virtio_feature_map_t virtio_mem_feature_map[] = { /* virtio-rng features mapping */ #ifdef CONFIG_VIRTIO_RNG -static qmp_virtio_feature_map_t virtio_rng_feature_map[] = { +static const qmp_virtio_feature_map_t virtio_rng_feature_map[] = { FEATURE_ENTRY(VHOST_F_LOG_ALL, \ "VHOST_F_LOG_ALL: Logging write descriptors supported"), FEATURE_ENTRY(VHOST_USER_F_PROTOCOL_FEATURES, \
These arrays are only accessed read-only, move them to .rodata. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/virtio/virtio.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-)