diff mbox series

[v3,2/2] tpm: add backend for mssim

Message ID 20221219131344.18909-3-jejb@linux.ibm.com (mailing list archive)
State New, archived
Headers show
Series tpm: add mssim backend | expand

Commit Message

James Bottomley Dec. 19, 2022, 1:13 p.m. UTC
From: James Bottomley <James.Bottomley@HansenPartnership.com>

The Microsoft Simulator (mssim) is the reference emulation platform
for the TCG TPM 2.0 specification.

https://github.com/Microsoft/ms-tpm-20-ref.git

It exports a fairly simple network socket based protocol on two
sockets, one for command (default 2321) and one for control (default
2322).  This patch adds a simple backend that can speak the mssim
protocol over the network.  It also allows the two sockets to be
specified on the command line.  The benefits are twofold: firstly it
gives us a backend that actually speaks a standard TPM emulation
protocol instead of the linux specific TPM driver format of the
current emulated TPM backend and secondly, using the microsoft
protocol, the end point of the emulator can be anywhere on the
network, facilitating the cloud use case where a central TPM service
can be used over a control network.

The implementation does basic control commands like power off/on, but
doesn't implement cancellation or startup.  The former because
cancellation is pretty much useless on a fast operating TPM emulator
and the latter because this emulator is designed to be used with OVMF
which itself does TPM startup and I wanted to validate that.

To run this, simply download an emulator based on the MS specification
(package ibmswtpm2 on openSUSE) and run it, then add these two lines
to the qemu command and it will use the emulator.

    -tpmdev mssim,id=tpm0 \
    -device tpm-crb,tpmdev=tpm0 \

to use a remote emulator replace the first line with

    -tpmdev "{'type':'mssim','id':'tpm0','command':{'type':inet,'host':'remote','port':'2321'}}"

tpm-tis also works as the backend.

Signed-off-by: James Bottomley <jejb@linux.ibm.com>

---

v2: convert to SocketAddr json and use qio_channel_socket_connect_sync()
v3: gate control power off by migration state keep control socket disconnected
    to test outside influence and add docs.
---
 MAINTAINERS              |   6 +
 backends/tpm/Kconfig     |   5 +
 backends/tpm/meson.build |   1 +
 backends/tpm/tpm_mssim.c | 264 +++++++++++++++++++++++++++++++++++++++
 backends/tpm/tpm_mssim.h |  43 +++++++
 docs/specs/tpm.rst       |  35 ++++++
 monitor/hmp-cmds.c       |   7 ++
 qapi/tpm.json            |  25 +++-
 8 files changed, 383 insertions(+), 3 deletions(-)
 create mode 100644 backends/tpm/tpm_mssim.c
 create mode 100644 backends/tpm/tpm_mssim.h
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 6966490c94..b0f5cceda1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3043,9 +3043,15 @@  F: include/hw/acpi/tpm.h
 F: include/sysemu/tpm*
 F: qapi/tpm.json
 F: backends/tpm/
+X: backends/tpm/tpm_mssim.*
 F: tests/qtest/*tpm*
 T: git https://github.com/stefanberger/qemu-tpm.git tpm-next
 
+MSSIM TPM Backend
+M: James Bottomley <jejb@linux.ibm.com>
+S: Maintained
+F: backends/tpm/tpm_mssim.*
+
 Checkpatch
 S: Odd Fixes
 F: scripts/checkpatch.pl
diff --git a/backends/tpm/Kconfig b/backends/tpm/Kconfig
index 5d91eb89c2..d6d6fa53e9 100644
--- a/backends/tpm/Kconfig
+++ b/backends/tpm/Kconfig
@@ -12,3 +12,8 @@  config TPM_EMULATOR
     bool
     default y
     depends on TPM_BACKEND
+
+config TPM_MSSIM
+    bool
+    default y
+    depends on TPM_BACKEND
diff --git a/backends/tpm/meson.build b/backends/tpm/meson.build
index 7f2503f84e..c7c3c79125 100644
--- a/backends/tpm/meson.build
+++ b/backends/tpm/meson.build
@@ -3,4 +3,5 @@  if have_tpm
   softmmu_ss.add(files('tpm_util.c'))
   softmmu_ss.add(when: 'CONFIG_TPM_PASSTHROUGH', if_true: files('tpm_passthrough.c'))
   softmmu_ss.add(when: 'CONFIG_TPM_EMULATOR', if_true: files('tpm_emulator.c'))
+  softmmu_ss.add(when: 'CONFIG_TPM_MSSIM', if_true: files('tpm_mssim.c'))
 endif
diff --git a/backends/tpm/tpm_mssim.c b/backends/tpm/tpm_mssim.c
new file mode 100644
index 0000000000..1b990bfa30
--- /dev/null
+++ b/backends/tpm/tpm_mssim.c
@@ -0,0 +1,264 @@ 
+/*
+ * Emulator TPM driver which connects over the mssim protocol
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Copyright (c) 2022
+ * Author: James Bottomley <jejb@linux.ibm.com>
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/error-report.h"
+#include "qemu/sockets.h"
+
+#include "qapi/clone-visitor.h"
+#include "qapi/qapi-visit-tpm.h"
+
+#include "io/channel-socket.h"
+
+#include "sysemu/runstate.h"
+#include "sysemu/tpm_backend.h"
+#include "sysemu/tpm_util.h"
+
+#include "qom/object.h"
+
+#include "tpm_int.h"
+#include "tpm_mssim.h"
+
+#define ERROR_PREFIX "TPM mssim Emulator: "
+
+#define TYPE_TPM_MSSIM "tpm-mssim"
+OBJECT_DECLARE_SIMPLE_TYPE(TPMmssim, TPM_MSSIM)
+
+struct TPMmssim {
+    TPMBackend parent;
+
+    TpmTypeOptions *opts;
+
+    QIOChannelSocket *cmd_qc, *ctrl_qc;
+};
+
+static int tpm_send_ctrl(TPMmssim *t, uint32_t cmd, Error **errp)
+{
+    int ret;
+
+    qio_channel_socket_connect_sync(t->ctrl_qc, t->opts->u.mssim.control, errp);
+    cmd = htonl(cmd);
+    ret = qio_channel_write_all(QIO_CHANNEL(t->ctrl_qc), (char *)&cmd, sizeof(cmd), errp);
+    if (ret != 0)
+        goto out;
+    ret = qio_channel_read_all(QIO_CHANNEL(t->ctrl_qc), (char *)&cmd, sizeof(cmd), errp);
+    if (ret != 0)
+        goto out;
+    if (cmd != 0) {
+        error_setg(errp, ERROR_PREFIX "Incorrect ACK recieved on control channel 0x%x\n", cmd);
+        ret = -1;
+    }
+ out:
+    qio_channel_close(QIO_CHANNEL(t->ctrl_qc), errp);
+    return ret;
+}
+
+static void tpm_mssim_instance_init(Object *obj)
+{
+}
+
+static void tpm_mssim_instance_finalize(Object *obj)
+{
+    TPMmssim *t = TPM_MSSIM(obj);
+
+    if (t->ctrl_qc && !runstate_check(RUN_STATE_INMIGRATE))
+        tpm_send_ctrl(t, TPM_SIGNAL_POWER_OFF, NULL);
+
+    object_unref(OBJECT(t->ctrl_qc));
+    object_unref(OBJECT(t->cmd_qc));
+}
+
+static void tpm_mssim_cancel_cmd(TPMBackend *tb)
+{
+        return;
+}
+
+static TPMVersion tpm_mssim_get_version(TPMBackend *tb)
+{
+    return TPM_VERSION_2_0;
+}
+
+static size_t tpm_mssim_get_buffer_size(TPMBackend *tb)
+{
+    /* TCG standard profile max buffer size */
+    return 4096;
+}
+
+static TpmTypeOptions *tpm_mssim_get_opts(TPMBackend *tb)
+{
+    TPMmssim *t = TPM_MSSIM(tb);
+    TpmTypeOptions *opts;
+
+    opts = QAPI_CLONE(TpmTypeOptions, t->opts);
+
+    return opts;
+}
+
+static void tpm_mssim_handle_request(TPMBackend *tb, TPMBackendCmd *cmd,
+                                     Error **errp)
+{
+    TPMmssim *t = TPM_MSSIM(tb);
+    uint32_t header, len;
+    uint8_t locality = cmd->locty;
+    struct iovec iov[4];
+    int ret;
+
+    header = htonl(TPM_SEND_COMMAND);
+    len = htonl(cmd->in_len);
+
+    iov[0].iov_base = &header;
+    iov[0].iov_len = sizeof(header);
+    iov[1].iov_base = &locality;
+    iov[1].iov_len = sizeof(locality);
+    iov[2].iov_base = &len;
+    iov[2].iov_len = sizeof(len);
+    iov[3].iov_base = (void *)cmd->in;
+    iov[3].iov_len = cmd->in_len;
+
+    ret = qio_channel_writev_all(QIO_CHANNEL(t->cmd_qc), iov, 4, errp);
+    if (ret != 0)
+        goto fail;
+
+    ret = qio_channel_read_all(QIO_CHANNEL(t->cmd_qc), (char *)&len, sizeof(len), errp);
+    if (ret != 0)
+        goto fail;
+    len = ntohl(len);
+    if (len > cmd->out_len) {
+        error_setg(errp, "receive size is too large");
+        goto fail;
+    }
+    ret = qio_channel_read_all(QIO_CHANNEL(t->cmd_qc), (char *)cmd->out, len, errp);
+    if (ret != 0)
+        goto fail;
+    /* ACK packet */
+    ret = qio_channel_read_all(QIO_CHANNEL(t->cmd_qc), (char *)&header, sizeof(header), errp);
+    if (ret != 0)
+        goto fail;
+    if (header != 0) {
+        error_setg(errp, "incorrect ACK received on command channel 0x%x", len);
+        goto fail;
+    }
+
+    return;
+
+ fail:
+    error_prepend(errp, ERROR_PREFIX);
+    tpm_util_write_fatal_error_response(cmd->out, cmd->out_len);
+}
+
+static TPMBackend *tpm_mssim_create(TpmTypeOptions *opts)
+{
+    TPMBackend *be = TPM_BACKEND(object_new(TYPE_TPM_MSSIM));
+    TPMmssim *t = TPM_MSSIM(be);
+    int sock;
+    Error *errp = NULL;
+    TPMmssimOptions *mo = &opts->u.mssim;
+
+    t->opts = opts;
+    if (!mo->has_command) {
+            mo->has_command = true;
+            mo->command = g_new0(SocketAddress, 1);
+            mo->command->type = SOCKET_ADDRESS_TYPE_INET;
+            mo->command->u.inet.host = g_strdup("localhost");
+            mo->command->u.inet.port = g_strdup("2321");
+    }
+    if (!mo->has_control) {
+            int port;
+
+            mo->has_control = true;
+            mo->control = g_new0(SocketAddress, 1);
+            mo->control->type = SOCKET_ADDRESS_TYPE_INET;
+            mo->control->u.inet.host = g_strdup(mo->command->u.inet.host);
+            /* in the reference implementation, the control port is
+             * always one above the command port */
+            port = atoi(mo->command->u.inet.port) + 1;
+            mo->control->u.inet.port = g_strdup_printf("%d", port);
+    }
+
+    t->cmd_qc = qio_channel_socket_new();
+    t->ctrl_qc = qio_channel_socket_new();
+
+    if (qio_channel_socket_connect_sync(t->cmd_qc, mo->command, &errp) < 0)
+        goto fail;
+
+    if (qio_channel_socket_connect_sync(t->ctrl_qc, mo->control, &errp) < 0)
+        goto fail;
+    qio_channel_close(QIO_CHANNEL(t->ctrl_qc), &errp);
+
+    if (!runstate_check(RUN_STATE_INMIGRATE)) {
+        /* reset the TPM using a power cycle sequence, in case someone
+         * has previously powered it up */
+        sock = tpm_send_ctrl(t, TPM_SIGNAL_POWER_OFF, &errp);
+        if (sock != 0)
+            goto fail;
+        sock = tpm_send_ctrl(t, TPM_SIGNAL_POWER_ON, &errp);
+        if (sock != 0)
+            goto fail;
+        sock = tpm_send_ctrl(t, TPM_SIGNAL_NV_ON, &errp);
+        if (sock != 0)
+            goto fail;
+    }
+
+    return be;
+
+ fail:
+    object_unref(OBJECT(t->ctrl_qc));
+    object_unref(OBJECT(t->cmd_qc));
+    t->ctrl_qc = NULL;
+    t->cmd_qc = NULL;
+    error_prepend(&errp, ERROR_PREFIX);
+    error_report_err(errp);
+    object_unref(OBJECT(be));
+
+    return NULL;
+}
+
+static const QemuOptDesc tpm_mssim_cmdline_opts[] = {
+    TPM_STANDARD_CMDLINE_OPTS,
+    {
+        .name = "command",
+        .type = QEMU_OPT_STRING,
+        .help = "Command socket (default localhost:2321)",
+    },
+    {
+        .name = "control",
+        .type = QEMU_OPT_STRING,
+        .help = "control socket (default localhost:2322)",
+    },
+};
+
+static void tpm_mssim_class_init(ObjectClass *klass, void *data)
+{
+    TPMBackendClass *cl = TPM_BACKEND_CLASS(klass);
+
+    cl->type = TPM_TYPE_MSSIM;
+    cl->opts = tpm_mssim_cmdline_opts;
+    cl->desc = "TPM mssim emulator backend driver";
+    cl->create = tpm_mssim_create;
+    cl->cancel_cmd = tpm_mssim_cancel_cmd;
+    cl->get_tpm_version = tpm_mssim_get_version;
+    cl->get_buffer_size = tpm_mssim_get_buffer_size;
+    cl->get_tpm_options = tpm_mssim_get_opts;
+    cl->handle_request = tpm_mssim_handle_request;
+}
+
+static const TypeInfo tpm_mssim_info = {
+    .name = TYPE_TPM_MSSIM,
+    .parent = TYPE_TPM_BACKEND,
+    .instance_size = sizeof(TPMmssim),
+    .class_init = tpm_mssim_class_init,
+    .instance_init = tpm_mssim_instance_init,
+    .instance_finalize = tpm_mssim_instance_finalize,
+};
+
+static void tpm_mssim_register(void)
+{
+    type_register_static(&tpm_mssim_info);
+}
+
+type_init(tpm_mssim_register)
diff --git a/backends/tpm/tpm_mssim.h b/backends/tpm/tpm_mssim.h
new file mode 100644
index 0000000000..04a270338a
--- /dev/null
+++ b/backends/tpm/tpm_mssim.h
@@ -0,0 +1,43 @@ 
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * The code below is copied from the Microsoft/TCG Reference implementation
+ *
+ *  https://github.com/Microsoft/ms-tpm-20-ref.git
+ *
+ * In file TPMCmd/Simulator/include/TpmTcpProtocol.h
+ */
+
+#define TPM_SIGNAL_POWER_ON         1
+#define TPM_SIGNAL_POWER_OFF        2
+#define TPM_SIGNAL_PHYS_PRES_ON     3
+#define TPM_SIGNAL_PHYS_PRES_OFF    4
+#define TPM_SIGNAL_HASH_START       5
+#define TPM_SIGNAL_HASH_DATA        6
+        // {uint32_t BufferSize, uint8_t[BufferSize] Buffer}
+#define TPM_SIGNAL_HASH_END         7
+#define TPM_SEND_COMMAND            8
+        // {uint8_t Locality, uint32_t InBufferSize, uint8_t[InBufferSize] InBuffer} ->
+        //     {uint32_t OutBufferSize, uint8_t[OutBufferSize] OutBuffer}
+
+#define TPM_SIGNAL_CANCEL_ON        9
+#define TPM_SIGNAL_CANCEL_OFF       10
+#define TPM_SIGNAL_NV_ON            11
+#define TPM_SIGNAL_NV_OFF           12
+#define TPM_SIGNAL_KEY_CACHE_ON     13
+#define TPM_SIGNAL_KEY_CACHE_OFF    14
+
+#define TPM_REMOTE_HANDSHAKE        15
+#define TPM_SET_ALTERNATIVE_RESULT  16
+
+#define TPM_SIGNAL_RESET            17
+#define TPM_SIGNAL_RESTART          18
+
+#define TPM_SESSION_END             20
+#define TPM_STOP                    21
+
+#define TPM_GET_COMMAND_RESPONSE_SIZES  25
+
+#define TPM_ACT_GET_SIGNALED        26
+
+#define TPM_TEST_FAILURE_MODE       30
diff --git a/docs/specs/tpm.rst b/docs/specs/tpm.rst
index 535912a92b..1398735956 100644
--- a/docs/specs/tpm.rst
+++ b/docs/specs/tpm.rst
@@ -270,6 +270,38 @@  available as a module (assuming a TPM 2 is passed through):
   /sys/devices/LNXSYSTEM:00/LNXSYBUS:00/MSFT0101:00/tpm/tpm0/pcr-sha256/9
   ...
 
+The QEMU TPM Microsoft Simulator Device
+---------------------------------------
+
+The TCG provides a reference implementation for TPM 2.0 written by
+Microsoft (See `ms-tpm-20-ref`_ on github).  The reference implementation
+starts a network server and listens for TPM commands on port 2321 and
+TPM Platform control commands on port 2322, although these can be
+altered.  The QEMU mssim TPM backend talks to this implementation.  By
+default it connects to the default ports on localhost:
+
+.. code-block:: console
+
+  qemu-system-x86_64 <qemu-options> \
+    -tpmdev mssim,id=tpm0 \
+    -device tpm-crb,tpmdev=tpm0
+
+
+Although it can also communicate with a remote host, which must be
+specified as a SocketAddress via json on the command line for each of
+the command and control ports:
+
+.. code-block:: console
+
+  qemu-system-x86_64 <qemu-options> \
+    -tpmdev "{'type':'mssim','id':'tpm0','command':{'type':'inet','host':'remote','port':'2321'},'control':{'type':'inet','host':'remote','port':'2322'}}" \
+    -device tpm-crb,tpmdev=tpm0
+
+
+The mssim backend supports snapshotting and migration, but the state
+of the Microsoft Simulator server must be preserved (or the server
+kept running) outside of QEMU for restore to be successful.
+
 The QEMU TPM emulator device
 ----------------------------
 
@@ -526,3 +558,6 @@  the following:
 
 .. _SWTPM protocol:
    https://github.com/stefanberger/swtpm/blob/master/man/man3/swtpm_ioctls.pod
+
+.. _ms-tpm-20-ref:
+   https://github.com/microsoft/ms-tpm-20-ref
diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
index e99447ad68..319f9eeeb6 100644
--- a/monitor/hmp-cmds.c
+++ b/monitor/hmp-cmds.c
@@ -841,6 +841,7 @@  void hmp_info_tpm(Monitor *mon, const QDict *qdict)
     unsigned int c = 0;
     TPMPassthroughOptions *tpo;
     TPMEmulatorOptions *teo;
+    TPMmssimOptions *tmo;
 
     info_list = qmp_query_tpm(&err);
     if (err) {
@@ -874,6 +875,12 @@  void hmp_info_tpm(Monitor *mon, const QDict *qdict)
             teo = &ti->options->u.emulator;
             monitor_printf(mon, ",chardev=%s", teo->chardev);
             break;
+        case TPM_TYPE_MSSIM:
+            tmo = &ti->options->u.mssim;
+            monitor_printf(mon, ",command=%s:%s,control=%s:%s",
+                           tmo->command->u.inet.host, tmo->command->u.inet.port,
+                           tmo->control->u.inet.host, tmo->control->u.inet.port);
+            break;
         case TPM_TYPE__MAX:
             break;
         }
diff --git a/qapi/tpm.json b/qapi/tpm.json
index d8cbd5ea0e..b773bde2ff 100644
--- a/qapi/tpm.json
+++ b/qapi/tpm.json
@@ -5,6 +5,7 @@ 
 ##
 # = TPM (trusted platform module) devices
 ##
+{ 'include': 'sockets.json' }
 
 ##
 # @TpmModel:
@@ -49,7 +50,7 @@ 
 #
 # Since: 1.5
 ##
-{ 'enum': 'TpmType', 'data': [ 'passthrough', 'emulator' ],
+{ 'enum': 'TpmType', 'data': [ 'passthrough', 'emulator', 'mssim' ],
   'if': 'CONFIG_TPM' }
 
 ##
@@ -64,7 +65,7 @@ 
 # Example:
 #
 # -> { "execute": "query-tpm-types" }
-# <- { "return": [ "passthrough", "emulator" ] }
+# <- { "return": [ "passthrough", "emulator", "mssim" ] }
 #
 ##
 { 'command': 'query-tpm-types', 'returns': ['TpmType'],
@@ -99,6 +100,22 @@ 
 { 'struct': 'TPMEmulatorOptions', 'data': { 'chardev' : 'str' },
   'if': 'CONFIG_TPM' }
 
+##
+# @TPMmssimOptions:
+#
+# Information for the mssim emulator connection
+#
+# @command: command socket for the TPM emulator
+# @control: control socket for the TPM emulator
+#
+# Since: 7.2.0
+##
+{ 'struct': 'TPMmssimOptions',
+  'data': {
+      '*command': 'SocketAddress',
+      '*control': 'SocketAddress' },
+  'if': 'CONFIG_TPM' }
+
 ##
 # @TpmTypeOptions:
 #
@@ -107,6 +124,7 @@ 
 # @id: identifier of the backend
 # @type: - 'passthrough' The configuration options for the TPM passthrough type
 #        - 'emulator' The configuration options for TPM emulator backend type
+#        - 'mssim' The configuration options for TPM emulator mssim type
 #
 # Since: 1.5
 ##
@@ -115,7 +133,8 @@ 
             'id': 'str' },
   'discriminator': 'type',
   'data': { 'passthrough' : 'TPMPassthroughOptions',
-            'emulator': 'TPMEmulatorOptions' },
+            'emulator': 'TPMEmulatorOptions',
+            'mssim': 'TPMmssimOptions' },
   'if': 'CONFIG_TPM' }
 
 ##