diff mbox series

[v7,2/3] hw/riscv/boot.c: make riscv_load_initrd() static

Message ID 20230113171805.470252-3-dbarboza@ventanamicro.com (mailing list archive)
State New, archived
Headers show
Series hw/riscv: clear kernel_entry high bits with 32bit CPUs | expand

Commit Message

Daniel Henrique Barboza Jan. 13, 2023, 5:18 p.m. UTC
The only remaining caller is riscv_load_kernel_and_initrd() which
belongs to the same file.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
---
 hw/riscv/boot.c         | 80 ++++++++++++++++++++---------------------
 include/hw/riscv/boot.h |  1 -
 2 files changed, 40 insertions(+), 41 deletions(-)

Comments

Alistair Francis Jan. 16, 2023, 2:55 a.m. UTC | #1
On Sat, Jan 14, 2023 at 3:39 AM Daniel Henrique Barboza
<dbarboza@ventanamicro.com> wrote:
>
> The only remaining caller is riscv_load_kernel_and_initrd() which
> belongs to the same file.
>
> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> Reviewed-by: Bin Meng <bmeng@tinylab.org>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

> ---
>  hw/riscv/boot.c         | 80 ++++++++++++++++++++---------------------
>  include/hw/riscv/boot.h |  1 -
>  2 files changed, 40 insertions(+), 41 deletions(-)
>
> diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
> index 4888d5c1e0..e868fb6ade 100644
> --- a/hw/riscv/boot.c
> +++ b/hw/riscv/boot.c
> @@ -173,6 +173,46 @@ target_ulong riscv_load_firmware(const char *firmware_filename,
>      exit(1);
>  }
>
> +static void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry)
> +{
> +    const char *filename = machine->initrd_filename;
> +    uint64_t mem_size = machine->ram_size;
> +    void *fdt = machine->fdt;
> +    hwaddr start, end;
> +    ssize_t size;
> +
> +    g_assert(filename != NULL);
> +
> +    /*
> +     * We want to put the initrd far enough into RAM that when the
> +     * kernel is uncompressed it will not clobber the initrd. However
> +     * on boards without much RAM we must ensure that we still leave
> +     * enough room for a decent sized initrd, and on boards with large
> +     * amounts of RAM we must avoid the initrd being so far up in RAM
> +     * that it is outside lowmem and inaccessible to the kernel.
> +     * So for boards with less  than 256MB of RAM we put the initrd
> +     * halfway into RAM, and for boards with 256MB of RAM or more we put
> +     * the initrd at 128MB.
> +     */
> +    start = kernel_entry + MIN(mem_size / 2, 128 * MiB);
> +
> +    size = load_ramdisk(filename, start, mem_size - start);
> +    if (size == -1) {
> +        size = load_image_targphys(filename, start, mem_size - start);
> +        if (size == -1) {
> +            error_report("could not load ramdisk '%s'", filename);
> +            exit(1);
> +        }
> +    }
> +
> +    /* Some RISC-V machines (e.g. opentitan) don't have a fdt. */
> +    if (fdt) {
> +        end = start + size;
> +        qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", start);
> +        qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", end);
> +    }
> +}
> +
>  target_ulong riscv_load_kernel(MachineState *machine,
>                                 target_ulong kernel_start_addr,
>                                 bool load_initrd,
> @@ -225,46 +265,6 @@ out:
>      return kernel_entry;
>  }
>
> -void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry)
> -{
> -    const char *filename = machine->initrd_filename;
> -    uint64_t mem_size = machine->ram_size;
> -    void *fdt = machine->fdt;
> -    hwaddr start, end;
> -    ssize_t size;
> -
> -    g_assert(filename != NULL);
> -
> -    /*
> -     * We want to put the initrd far enough into RAM that when the
> -     * kernel is uncompressed it will not clobber the initrd. However
> -     * on boards without much RAM we must ensure that we still leave
> -     * enough room for a decent sized initrd, and on boards with large
> -     * amounts of RAM we must avoid the initrd being so far up in RAM
> -     * that it is outside lowmem and inaccessible to the kernel.
> -     * So for boards with less  than 256MB of RAM we put the initrd
> -     * halfway into RAM, and for boards with 256MB of RAM or more we put
> -     * the initrd at 128MB.
> -     */
> -    start = kernel_entry + MIN(mem_size / 2, 128 * MiB);
> -
> -    size = load_ramdisk(filename, start, mem_size - start);
> -    if (size == -1) {
> -        size = load_image_targphys(filename, start, mem_size - start);
> -        if (size == -1) {
> -            error_report("could not load ramdisk '%s'", filename);
> -            exit(1);
> -        }
> -    }
> -
> -    /* Some RISC-V machines (e.g. opentitan) don't have a fdt. */
> -    if (fdt) {
> -        end = start + size;
> -        qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", start);
> -        qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", end);
> -    }
> -}
> -
>  uint64_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt)
>  {
>      uint64_t temp, fdt_addr;
> diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
> index c3de897371..cbd131bad7 100644
> --- a/include/hw/riscv/boot.h
> +++ b/include/hw/riscv/boot.h
> @@ -47,7 +47,6 @@ target_ulong riscv_load_kernel(MachineState *machine,
>                                 target_ulong firmware_end_addr,
>                                 bool load_initrd,
>                                 symbol_fn_t sym_cb);
> -void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry);
>  uint64_t riscv_load_fdt(hwaddr dram_start, uint64_t dram_size, void *fdt);
>  void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts,
>                                 hwaddr saddr,
> --
> 2.39.0
>
>
diff mbox series

Patch

diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
index 4888d5c1e0..e868fb6ade 100644
--- a/hw/riscv/boot.c
+++ b/hw/riscv/boot.c
@@ -173,6 +173,46 @@  target_ulong riscv_load_firmware(const char *firmware_filename,
     exit(1);
 }
 
+static void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry)
+{
+    const char *filename = machine->initrd_filename;
+    uint64_t mem_size = machine->ram_size;
+    void *fdt = machine->fdt;
+    hwaddr start, end;
+    ssize_t size;
+
+    g_assert(filename != NULL);
+
+    /*
+     * We want to put the initrd far enough into RAM that when the
+     * kernel is uncompressed it will not clobber the initrd. However
+     * on boards without much RAM we must ensure that we still leave
+     * enough room for a decent sized initrd, and on boards with large
+     * amounts of RAM we must avoid the initrd being so far up in RAM
+     * that it is outside lowmem and inaccessible to the kernel.
+     * So for boards with less  than 256MB of RAM we put the initrd
+     * halfway into RAM, and for boards with 256MB of RAM or more we put
+     * the initrd at 128MB.
+     */
+    start = kernel_entry + MIN(mem_size / 2, 128 * MiB);
+
+    size = load_ramdisk(filename, start, mem_size - start);
+    if (size == -1) {
+        size = load_image_targphys(filename, start, mem_size - start);
+        if (size == -1) {
+            error_report("could not load ramdisk '%s'", filename);
+            exit(1);
+        }
+    }
+
+    /* Some RISC-V machines (e.g. opentitan) don't have a fdt. */
+    if (fdt) {
+        end = start + size;
+        qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", start);
+        qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", end);
+    }
+}
+
 target_ulong riscv_load_kernel(MachineState *machine,
                                target_ulong kernel_start_addr,
                                bool load_initrd,
@@ -225,46 +265,6 @@  out:
     return kernel_entry;
 }
 
-void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry)
-{
-    const char *filename = machine->initrd_filename;
-    uint64_t mem_size = machine->ram_size;
-    void *fdt = machine->fdt;
-    hwaddr start, end;
-    ssize_t size;
-
-    g_assert(filename != NULL);
-
-    /*
-     * We want to put the initrd far enough into RAM that when the
-     * kernel is uncompressed it will not clobber the initrd. However
-     * on boards without much RAM we must ensure that we still leave
-     * enough room for a decent sized initrd, and on boards with large
-     * amounts of RAM we must avoid the initrd being so far up in RAM
-     * that it is outside lowmem and inaccessible to the kernel.
-     * So for boards with less  than 256MB of RAM we put the initrd
-     * halfway into RAM, and for boards with 256MB of RAM or more we put
-     * the initrd at 128MB.
-     */
-    start = kernel_entry + MIN(mem_size / 2, 128 * MiB);
-
-    size = load_ramdisk(filename, start, mem_size - start);
-    if (size == -1) {
-        size = load_image_targphys(filename, start, mem_size - start);
-        if (size == -1) {
-            error_report("could not load ramdisk '%s'", filename);
-            exit(1);
-        }
-    }
-
-    /* Some RISC-V machines (e.g. opentitan) don't have a fdt. */
-    if (fdt) {
-        end = start + size;
-        qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", start);
-        qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", end);
-    }
-}
-
 uint64_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt)
 {
     uint64_t temp, fdt_addr;
diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
index c3de897371..cbd131bad7 100644
--- a/include/hw/riscv/boot.h
+++ b/include/hw/riscv/boot.h
@@ -47,7 +47,6 @@  target_ulong riscv_load_kernel(MachineState *machine,
                                target_ulong firmware_end_addr,
                                bool load_initrd,
                                symbol_fn_t sym_cb);
-void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry);
 uint64_t riscv_load_fdt(hwaddr dram_start, uint64_t dram_size, void *fdt);
 void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts,
                                hwaddr saddr,