| Message ID | 20230511175609.2091136-4-fan.ni@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC,1/7] hw/cxl/cxl-mailbox-utils: Add dc_event_log_size field to output payload of identify memory device command | expand |
On Thu, 11 May 2023 17:56:40 +0000 Fan Ni <fan.ni@samsung.com> wrote: > From: Fan Ni <nifan@outlook.com> > > Add a property 'num-dc-regions' to ct3_props to allow users to create DC > regions. > With the change, users can control the number of DC regions the device > supports. > To make it easier, other parameters of the region like region base, length, > and block size are hard coded. If desired, these parameters > can be added easily. > > Signed-off-by: Fan Ni <fan.ni@samsung.com> Ok. This is fine for initial testing, but we need to figure out how to actually handle DCD regions and how to back them with memory. Probably a 3rd memory backend to cover all the DCD regions? Default perhaps to an even spread of a few regions (no real point in doing more than 2 for initial support, fall back to 1 region if size is too small). We will want to be able to mess with regions from the FM-API but lots more to do there before that matters and we can still have default config for any regions we define now. Jonathan > --- > hw/mem/cxl_type3.c | 32 ++++++++++++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > > diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c > index 2b483d3d8e..b9c375d9b4 100644 > --- a/hw/mem/cxl_type3.c > +++ b/hw/mem/cxl_type3.c > @@ -684,6 +684,34 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value, > } > } > > +/* > + * Create a dc region to test "Get Dynamic Capacity Configuration" command. > + */ > +static int cxl_create_toy_regions(CXLType3Dev *ct3d) > +{ > + int i; > + uint64_t region_base = ct3d->hostvmem?ct3d->hostvmem->size > + + ct3d->hostpmem->size:ct3d->hostpmem->size; > + uint64_t region_len = 1024*1024*1024; > + uint64_t decode_len = 4; /* 4*256MB */ > + uint64_t blk_size = 2*1024*1024; > + struct CXLDCD_Region *region; > + > + for (i = 0; i < ct3d->dc.num_regions; i++) { > + region = &ct3d->dc.regions[i]; > + region->base = region_base; > + region->decode_len = decode_len; > + region->len = region_len; > + region->block_size = blk_size; > + /* dsmad_handle is set when creating cdat table entries */ > + region->flags = 0; > + > + region_base += region->len; > + } > + > + return 0; > +} > + > static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp) > { > DeviceState *ds = DEVICE(ct3d); > @@ -752,6 +780,9 @@ static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp) > g_free(p_name); > } > > + if (cxl_create_toy_regions(ct3d)) > + return false; > + > return true; > } > > @@ -1036,6 +1067,7 @@ static Property ct3_props[] = { > DEFINE_PROP_UINT64("sn", CXLType3Dev, sn, UI64_NULL), > DEFINE_PROP_STRING("cdat", CXLType3Dev, cxl_cstate.cdat.filename), > DEFINE_PROP_UINT16("spdm", CXLType3Dev, spdm_port, 0), > + DEFINE_PROP_UINT8("num-dc-regions", CXLType3Dev, dc.num_regions, 0), > DEFINE_PROP_END_OF_LIST(), > }; >
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c index 2b483d3d8e..b9c375d9b4 100644 --- a/hw/mem/cxl_type3.c +++ b/hw/mem/cxl_type3.c @@ -684,6 +684,34 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value, } } +/* + * Create a dc region to test "Get Dynamic Capacity Configuration" command. + */ +static int cxl_create_toy_regions(CXLType3Dev *ct3d) +{ + int i; + uint64_t region_base = ct3d->hostvmem?ct3d->hostvmem->size + + ct3d->hostpmem->size:ct3d->hostpmem->size; + uint64_t region_len = 1024*1024*1024; + uint64_t decode_len = 4; /* 4*256MB */ + uint64_t blk_size = 2*1024*1024; + struct CXLDCD_Region *region; + + for (i = 0; i < ct3d->dc.num_regions; i++) { + region = &ct3d->dc.regions[i]; + region->base = region_base; + region->decode_len = decode_len; + region->len = region_len; + region->block_size = blk_size; + /* dsmad_handle is set when creating cdat table entries */ + region->flags = 0; + + region_base += region->len; + } + + return 0; +} + static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp) { DeviceState *ds = DEVICE(ct3d); @@ -752,6 +780,9 @@ static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp) g_free(p_name); } + if (cxl_create_toy_regions(ct3d)) + return false; + return true; } @@ -1036,6 +1067,7 @@ static Property ct3_props[] = { DEFINE_PROP_UINT64("sn", CXLType3Dev, sn, UI64_NULL), DEFINE_PROP_STRING("cdat", CXLType3Dev, cxl_cstate.cdat.filename), DEFINE_PROP_UINT16("spdm", CXLType3Dev, spdm_port, 0), + DEFINE_PROP_UINT8("num-dc-regions", CXLType3Dev, dc.num_regions, 0), DEFINE_PROP_END_OF_LIST(), };