diff mbox series

[44/44] Append added properties to mailbox test

Message ID 20230726132512.149618-45-sergey.kambalin@auriga.com (mailing list archive)
State New, archived
Headers show
Series Raspberry Pi 4B machine | expand

Commit Message

Sergey Kambalin July 26, 2023, 1:25 p.m. UTC 
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
 tests/qtest/bcm2838-mbox-property-test.c | 82 ++++++++++++++++++++++++
 1 file changed, 82 insertions(+)
diff mbox series

Patch

diff --git a/tests/qtest/bcm2838-mbox-property-test.c b/tests/qtest/bcm2838-mbox-property-test.c
index e833529a00..68e2b11db6 100644
--- a/tests/qtest/bcm2838-mbox-property-test.c
+++ b/tests/qtest/bcm2838-mbox-property-test.c
@@ -242,6 +242,12 @@  DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, ANY) {
     tag->request.value.clock_id = CLOCK_ID_UNDEFINED;
 }
 
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCKS) {
+    g_assert_cmphex(tag->response.value.root_clock, ==, CLOCK_ID_ROOT);
+    g_assert_cmphex(tag->response.value.arm_clock, ==, CLOCK_ID_ARM);
+}
+
 /*----------------------------------------------------------------------------*/
 DECLARE_TEST_CASE(GET_TEMPERATURE) {
     g_assert_cmphex(tag->response.value.temperature_id, ==, TEMPERATURE_ID_SOC);
@@ -508,11 +514,31 @@  DECLARE_TEST_CASE(GET_COMMANDLINE) {
     /* No special checks are needed for this test case */
 }
 
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_THROTTLED) {
+    g_assert_cmpint(tag->response.value.throttled, ==, 0);
+}
+
 /*----------------------------------------------------------------------------*/
 DECLARE_TEST_CASE(GET_NUM_DISPLAYS) {
     g_assert_cmpint(tag->response.value.num_displays, ==, 1);
 }
 
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_DISPLAY_SETTINGS) {
+    g_assert_cmpint(tag->response.value.display_num, ==, 0);
+    g_assert_cmpint(tag->response.value.phys_width, ==, 800);
+    g_assert_cmpint(tag->response.value.phys_height, ==, 600);
+    g_assert_cmpint(tag->response.value.bpp, ==, 32);
+    g_assert_cmpint(tag->response.value.pitch, ==, 32);
+    g_assert_cmpint(tag->response.value.virt_width, ==, 0);
+    g_assert_cmpint(tag->response.value.virt_height, ==, 0);
+    g_assert_cmpint(tag->response.value.virt_width_offset, ==, 0);
+    g_assert_cmpint(tag->response.value.virt_height_offset, ==, 0);
+    g_assert_cmphex(tag->response.value.fb_bus_address_lo, ==, 0x00000000);
+    g_assert_cmphex(tag->response.value.fb_bus_address_hi, ==, 0x00000000);
+}
+
 /*----------------------------------------------------------------------------*/
 DECLARE_TEST_CASE(SET_PITCH) {
     /* No special checks are needed for this test case */
@@ -521,6 +547,54 @@  DECLARE_TEST_CASE_SETUP(SET_PITCH) {
     tag->request.value.pitch = DUMMY_VALUE;
 }
 
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_GPIO_CONFIG) {
+    g_assert_cmpint(tag->response.value.zero, ==, 0);
+    g_assert_cmphex(tag->response.value.direction, ==, GPIO_DIRECTION_IN);
+    g_assert_cmphex(tag->response.value.polarity, ==, GPIO_POLARITY_LOW);
+    g_assert_cmphex(tag->response.value.term_en, ==, GPIO_TERMINATION_DISABLED);
+    g_assert_cmphex(tag->response.value.term_pull_up, ==, GPIO_TERMINATION_PULLUP_DISABLED);
+}
+DECLARE_TEST_CASE_SETUP(GET_GPIO_CONFIG) {
+    tag->request.value.gpio_num = GPIO_0;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_GPIO_CONFIG) {
+    g_assert_cmpint(tag->response.value.zero, ==, 0);
+}
+DECLARE_TEST_CASE_SETUP(SET_GPIO_CONFIG) {
+    tag->request.value.gpio_num = GPIO_0;
+    tag->request.value.direction = DUMMY_VALUE;
+    tag->request.value.polarity = DUMMY_VALUE;
+    tag->request.value.term_en = DUMMY_VALUE;
+    tag->request.value.term_pull_up = DUMMY_VALUE;
+    tag->request.value.state = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_GPIO_STATE) {
+    g_assert_cmpint(tag->response.value.zero, ==, 0);
+    g_assert_cmphex(tag->response.value.state, ==, GPIO_STATE_DOWN);
+}
+DECLARE_TEST_CASE_SETUP(GET_GPIO_STATE) {
+    tag->request.value.gpio_num = GPIO_0;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_GPIO_STATE) {
+    g_assert_cmpint(tag->response.value.zero, ==, 0);
+}
+DECLARE_TEST_CASE_SETUP(SET_GPIO_STATE) {
+    tag->request.value.gpio_num = GPIO_0;
+    tag->request.value.state = GPIO_STATE_DOWN;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(INITIALIZE_VCHIQ) {
+    g_assert_cmpint(tag->response.value.zero, ==, 0);
+}
+
 /*----------------------------------------------------------------------------*/
 int main(int argc, char **argv)
 {
@@ -544,6 +618,7 @@  int main(int argc, char **argv)
     QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, ANY);
     QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, ANY);
     QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, ANY);
+    QTEST_ADD_TEST_CASE(GET_CLOCKS);
     QTEST_ADD_TEST_CASE(GET_TEMPERATURE);
     QTEST_ADD_TEST_CASE(GET_MAX_TEMPERATURE);
     QTEST_ADD_TEST_CASE(ALLOCATE_BUFFER);
@@ -577,8 +652,15 @@  int main(int argc, char **argv)
     QTEST_ADD_TEST_CASE(SET_OVERSCAN);
     QTEST_ADD_TEST_CASE(GET_DMA_CHANNELS);
     QTEST_ADD_TEST_CASE(GET_COMMANDLINE);
+    QTEST_ADD_TEST_CASE(GET_THROTTLED);
     QTEST_ADD_TEST_CASE(GET_NUM_DISPLAYS);
+    QTEST_ADD_TEST_CASE(GET_DISPLAY_SETTINGS);
     QTEST_ADD_TEST_CASE(SET_PITCH);
+    QTEST_ADD_TEST_CASE(GET_GPIO_CONFIG);
+    QTEST_ADD_TEST_CASE(SET_GPIO_CONFIG);
+    QTEST_ADD_TEST_CASE(GET_GPIO_STATE);
+    QTEST_ADD_TEST_CASE(SET_GPIO_STATE);
+    QTEST_ADD_TEST_CASE(INITIALIZE_VCHIQ);
 
     return g_test_run();
 }