@@ -30,3 +30,6 @@ config SIFIVE_PDMA
config XLNX_CSU_DMA
bool
select REGISTER
+
+config ATCDMAC300
+ bool
new file mode 100644
@@ -0,0 +1,435 @@
+/*
+ * Andes ATCDMAC300 (Andes Technology DMA Controller)
+ *
+ * Copyright (c) 2022 Andes Tech. Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/dma/atcdmac300.h"
+#include "hw/irq.h"
+#include "hw/qdev-properties.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "exec/memattrs.h"
+#include "exec/address-spaces.h"
+
+/* #define DEBUG_ANDES_ATCDMAC300 */
+#define LOGGE(x...) qemu_log_mask(LOG_GUEST_ERROR, x)
+#define xLOG(x...)
+#define yLOG(x...) qemu_log(x)
+#ifdef DEBUG_ANDES_ATCDMAC300
+ #define LOG(x...) yLOG(x)
+#else
+ #define LOG(x...) xLOG(x)
+#endif
+
+#define MEMTX_IOPMP_STALL (1 << 3)
+
+static void atcdmac300_dma_int_stat_update(ATCDMAC300State *s, int status,
+ int ch)
+{
+ s->IntStatus |= (1 << (status + ch));
+}
+
+static void atcdmac300_dma_reset_chan(ATCDMAC300State *s, int ch)
+{
+ if (s) {
+ s->chan[ch].ChnCtrl &= ~(1 << CHAN_CTL_ENABLE);
+ s->ChEN &= ~(1 << ch);
+ }
+}
+
+static void atcdmac300_dma_reset(ATCDMAC300State *s)
+{
+ int ch;
+ for (ch = 0; ch < ATCDMAC300_MAX_CHAN; ch++) {
+ atcdmac300_dma_reset_chan(s, ch);
+ }
+}
+
+static uint64_t atcdmac300_read(void *opaque, hwaddr offset, unsigned size)
+{
+ ATCDMAC300State *s = opaque;
+ int ch = 0;
+ uint64_t result = 0;
+
+ if (offset >= 0x40) {
+ ch = ATCDMAC300_GET_CHAN(offset);
+ offset = ATCDMAC300_GET_OFF(offset, ch);
+ }
+
+ switch (offset) {
+ case ATCDMAC300_DMA_CFG:
+ result = s->DMACfg;
+ break;
+ case ATCDMAC300_DMAC_CTRL:
+ break;
+ case ATCDMAC300_CHN_ABT:
+ break;
+ case ATCDMAC300_INT_STATUS:
+ result = s->IntStatus;
+ break;
+ case ATCDMAC300_CHAN_ENABLE:
+ result = s->ChEN;
+ break;
+ case ATCDMAC300_CHAN_CTL:
+ result = s->chan[ch].ChnCtrl;
+ break;
+ default:
+ LOGGE("%s: Bad offset 0x%" HWADDR_PRIX "\n",
+ __func__, offset);
+ break;
+ }
+
+ LOG("### atcdmac300_read()=0x%lx, val=0x%lx\n", offset, result);
+ return result;
+}
+
+static MemTxResult dma_iopmp_read(ATCDMAC300State *s, hwaddr addr, void *buf,
+ hwaddr len)
+{
+ if (s->iopmp_as) {
+ MemTxAttrs dma_attrs = {.iopmp_sid = s->sid};
+ return address_space_rw(s->iopmp_as, addr, dma_attrs,
+ buf, len, false);
+ }
+ cpu_physical_memory_read(addr, buf, len);
+ return MEMTX_OK;
+}
+
+static MemTxResult dma_iopmp_write(ATCDMAC300State *s, hwaddr addr, void *buf,
+ hwaddr len)
+{
+ if (s->iopmp_as) {
+ MemTxAttrs dma_attrs = {.iopmp_sid = s->sid};
+ return address_space_rw(s->iopmp_as, addr, dma_attrs,
+ buf, len, true);
+ }
+ cpu_physical_memory_write(addr, buf, len);
+ return MEMTX_OK;
+}
+
+static void atcdmac300_co_run(void *opaque)
+{
+ ATCDMAC300State *s = opaque;
+ int64_t remain_size, burst_remain_size, copy_size, copy_size_dst;
+ uint64_t src_addr, dst_addr, src_width, dst_width, burst_size,
+ src_addr_ctl, dst_addr_ctl, int_tc_mask, int_err_mask,
+ int_abort_mask;
+ uint64_t buf[ATCDMAC300_MAX_BURST_SIZE];
+ int result = 0;
+
+ while (1) {
+ for (int ch = 0; ch < ATCDMAC300_MAX_CHAN; ch++) {
+ if (((s->chan[ch].ChnCtrl >> CHAN_CTL_ENABLE) & 0x1) == 0x1) {
+ src_width = (s->chan[ch].ChnCtrl >> CHAN_CTL_SRC_WIDTH) &
+ CHAN_CTL_SRC_WIDTH_MASK;
+ dst_width = (s->chan[ch].ChnCtrl >> CHAN_CTL_DST_WIDTH) &
+ CHAN_CTL_DST_WIDTH_MASK;
+ burst_size = (s->chan[ch].ChnCtrl >> CHAN_CTL_SRC_BURST_SZ) &
+ CHAN_CTL_SRC_BURST_SZ_MASK;
+ src_addr = (s->chan[ch].ChnSrcAddrH << 32) |
+ s->chan[ch].ChnSrcAddr;
+ dst_addr = (s->chan[ch].ChnDstAddrH << 32) |
+ s->chan[ch].ChnDstAddr;
+ src_addr_ctl = (s->chan[ch].ChnCtrl >> CHAN_CTL_SRC_ADDR_CTL) &
+ CHAN_CTL_SRC_ADDR_CTL_MASK;
+ dst_addr_ctl = (s->chan[ch].ChnCtrl >> CHAN_CTL_DST_ADDR_CTL) &
+ CHAN_CTL_DST_ADDR_CTL_MASK;
+
+ src_width = 1 << src_width;
+ dst_width = 1 << dst_width;
+ burst_size = 1 << burst_size;
+ remain_size = s->chan[ch].ChnTranSize * src_width;
+ int_tc_mask = (s->chan[ch].ChnCtrl >> CHAN_CTL_INT_TC_MASK_POS)
+ & 0x1;
+ int_err_mask = (s->chan[ch].ChnCtrl >>
+ CHAN_CTL_INT_ERR_MASK_POS) & 0x1;
+ int_abort_mask = (s->chan[ch].ChnCtrl >>
+ CHAN_CTL_INT_ABT_MASK_POS) & 0x1;
+ if (remain_size && burst_size < (1 << 11) &&
+ src_width < (1 << 6) && dst_width < (1 << 6) &&
+ (src_addr & (src_width - 1)) == 0 &&
+ (dst_addr & (dst_width - 1)) == 0 &&
+ (remain_size & (dst_width - 1)) == 0 &&
+ (burst_size * src_width & (dst_width - 1)) == 0) {
+
+ while (remain_size > 0) {
+ /* check current abort status before a brust start*/
+ if (s->ChAbort & (1 << ch)) {
+ result = DMA_ABT_RESULT;
+ s->ChAbort &= ~(1 << ch);
+ atcdmac300_dma_reset_chan(s, ch);
+ atcdmac300_dma_int_stat_update(s, INT_STATUS_ABT,
+ ch);
+ if (!int_abort_mask) {
+ qemu_irq_raise(s->irq);
+ }
+ break;
+ }
+
+ int i;
+ for (i = 0; i < burst_size; i++) {
+ if (remain_size <= 0) {
+ break;
+ }
+
+ memset(buf, 0, sizeof(buf));
+
+ copy_size = MIN(remain_size, src_width);
+ result = dma_iopmp_read(s, src_addr, buf,
+ copy_size);
+ while (result == MEMTX_IOPMP_STALL) {
+ qemu_coroutine_yield();
+ result = dma_iopmp_read(s, src_addr, buf,
+ copy_size);
+ }
+ burst_remain_size = copy_size;
+ uint64_t *curr_ptr = buf;
+ while (burst_remain_size > 0) {
+ copy_size_dst = MIN(burst_remain_size,
+ dst_width);
+ result = dma_iopmp_write(s, dst_addr, curr_ptr,
+ copy_size_dst);
+ while (result == MEMTX_IOPMP_STALL) {
+ qemu_coroutine_yield();
+ result = dma_iopmp_read(s, src_addr, buf,
+ copy_size);
+ }
+ curr_ptr += copy_size_dst;
+ burst_remain_size -= copy_size_dst;
+ }
+
+ if (result != MEMTX_OK) {
+ break;
+ }
+
+ remain_size -= copy_size;
+
+ if (src_addr_ctl == 0) {
+ src_addr += copy_size;
+ }
+ if (src_addr_ctl == 1) {
+ src_addr -= copy_size;
+ }
+ if (dst_addr_ctl == 0) {
+ dst_addr += copy_size;
+ }
+ if (dst_addr_ctl == 1) {
+ dst_addr -= copy_size;
+ }
+ }
+ if (result != MEMTX_OK) {
+ break;
+ }
+ qemu_coroutine_yield();
+ }
+ if (result == MEMTX_OK) {
+ s->ChAbort &= ~(1 << ch);
+ atcdmac300_dma_reset_chan(s, ch);
+ atcdmac300_dma_int_stat_update(s, INT_STATUS_TC, ch);
+ if (!int_tc_mask) {
+ qemu_irq_raise(s->irq);
+ }
+ } else if (result != DMA_ABT_RESULT) {
+ s->ChAbort &= ~(1 << ch);
+ atcdmac300_dma_int_stat_update(s, INT_STATUS_ERR, ch);
+ atcdmac300_dma_reset_chan(s, ch);
+ if (!int_err_mask) {
+ qemu_irq_raise(s->irq);
+ }
+ }
+ } else {
+ s->ChAbort &= ~(1 << ch);
+ atcdmac300_dma_int_stat_update(s, INT_STATUS_ERR, ch);
+ atcdmac300_dma_reset_chan(s, ch);
+ if (!int_err_mask) {
+ qemu_irq_raise(s->irq);
+ }
+ }
+ }
+ }
+ qemu_coroutine_yield();
+ }
+}
+
+static void atcdmac300_bh_cb(void *opaque)
+{
+ ATCDMAC300State *s = opaque;
+
+ int rearm = 0;
+ if (s->running) {
+ rearm = 1;
+ goto out;
+ } else {
+ s->running = 1;
+ }
+
+ AioContext *ctx = qemu_get_current_aio_context();
+ aio_co_enter(ctx, s->co);
+
+ s->running = 0;
+out:
+ if (rearm) {
+ qemu_bh_schedule_idle(s->bh);
+ s->dma_bh_scheduled = true;
+ }
+ qemu_bh_schedule_idle(s->bh);
+ s->dma_bh_scheduled = true;
+ s->running = 0;
+}
+
+static void atcdmac300_write(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size)
+{
+ ATCDMAC300State *s = opaque;
+ int ch = 0;
+
+ LOG("@@@ atcdmac300_write()=0x%lx, value=0x%lx\n", offset, value);
+
+ if (offset >= 0x40) {
+ ch = ATCDMAC300_GET_CHAN(offset);
+ offset = ATCDMAC300_GET_OFF(offset, ch);
+ }
+
+ switch (offset) {
+ case ATCDMAC300_INT_STATUS:
+ /* Write 1 to clear */
+ s->IntStatus = 0;
+ break;
+ case ATCDMAC300_DMAC_CTRL:
+ atcdmac300_dma_reset(s);
+ break;
+ case ATCDMAC300_CHN_ABT:
+ for (int i = 0; i < ATCDMAC300_MAX_CHAN; i++) {
+ if (value & 0x1 && (s->chan[i].ChnCtrl & (1 << CHAN_CTL_ENABLE))) {
+ s->ChAbort |= (0x1 << i);
+ }
+ value >>= 1;
+ }
+ break;
+ case ATCDMAC300_CHAN_CTL:
+ s->chan[ch].ChnCtrl = value;
+ qemu_bh_schedule_idle(s->bh);
+ break;
+ case ATCDMAC300_CHAN_TRAN_SZ:
+ s->chan[ch].ChnTranSize = value;
+ break;
+ case ATCDMAC300_CHAN_SRC_ADDR:
+ s->chan[ch].ChnSrcAddr = value;
+ break;
+ case ATCDMAC300_CHAN_SRC_ADDR_H:
+ s->chan[ch].ChnSrcAddrH = value;
+ break;
+ case ATCDMAC300_CHAN_DST_ADDR:
+ s->chan[ch].ChnDstAddr = value;
+ break;
+ case ATCDMAC300_CHAN_DST_ADDR_H:
+ s->chan[ch].ChnDstAddrH = value;
+ break;
+ case ATCDMAC300_CHAN_LL_POINTER:
+ s->chan[ch].ChnLLPointer = value;
+ break;
+ case ATCDMAC300_CHAN_LL_POINTER_H:
+ s->chan[ch].ChnLLPointerH = value;
+ break;
+ default:
+ LOGGE("%s: Bad offset 0x%" HWADDR_PRIX "\n",
+ __func__, offset);
+ break;
+ }
+}
+
+static const MemoryRegionOps atcdmac300_ops = {
+ .read = atcdmac300_read,
+ .write = atcdmac300_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 8
+ }
+};
+
+static void atcdmac300_init(Object *obj)
+{
+ ATCDMAC300State *s = ATCDMAC300(obj);
+ SysBusDevice *sbus = SYS_BUS_DEVICE(obj);
+
+ sysbus_init_irq(sbus, &s->irq);
+ memory_region_init_io(&s->mmio, obj, &atcdmac300_ops, s, TYPE_ATCDMAC300,
+ s->mmio_size);
+ sysbus_init_mmio(sbus, &s->mmio);
+ if (s->iothread) {
+ s->ctx = iothread_get_aio_context(s->iothread);
+ } else {
+ s->ctx = qemu_get_aio_context();
+ }
+ s->bh = aio_bh_new(s->ctx, atcdmac300_bh_cb, s);
+ s->co = qemu_coroutine_create(atcdmac300_co_run, s);
+}
+
+static Property atcdmac300_properties[] = {
+ DEFINE_PROP_UINT32("mmio-size", ATCDMAC300State, mmio_size, 0x100000),
+ DEFINE_PROP_UINT32("id-and-revision", ATCDMAC300State, IdRev,
+ (ATCDMAC300_PRODUCT_ID << 8) |
+ ((ATCDMAC300_PRODUCT_ID & 0x7) << 4) |
+ ((ATCDMAC300_PRODUCT_ID & 0x7))),
+ DEFINE_PROP_UINT32("inturrupt-status", ATCDMAC300State, IntStatus, 0),
+ DEFINE_PROP_UINT32("dmac-configuration", ATCDMAC300State,
+ DMACfg, 0xc3404108),
+ DEFINE_PROP_LINK("iothread", ATCDMAC300State, iothread,
+ TYPE_IOTHREAD, IOThread *),
+
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void atcdmac300_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *k = DEVICE_CLASS(klass);
+ device_class_set_props(k, atcdmac300_properties);
+}
+
+static const TypeInfo atcdmac300_info = {
+ .name = TYPE_ATCDMAC300,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(ATCDMAC300State),
+ .class_init = atcdmac300_class_init,
+ .instance_init = atcdmac300_init,
+};
+
+DeviceState *
+atcdmac300_create(const char *name, hwaddr addr, hwaddr mmio_size, qemu_irq irq)
+{
+ DeviceState *dev;
+ dev = sysbus_create_varargs(TYPE_ATCDMAC300, addr, irq, NULL);
+ return dev;
+}
+
+static void atcdmac300_register_types(void)
+{
+ type_register_static(&atcdmac300_info);
+}
+
+void atcdmac300_connect_iopmp_as(DeviceState *dev, AddressSpace *iopmp_as,
+ uint32_t sid)
+{
+ ATCDMAC300State *s = ATCDMAC300(dev);
+ s->iopmp_as = iopmp_as;
+ s->sid = sid;
+}
+
+type_init(atcdmac300_register_types)
@@ -14,3 +14,4 @@ system_ss.add(when: 'CONFIG_PXA2XX', if_true: files('pxa2xx_dma.c'))
system_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_dma.c'))
system_ss.add(when: 'CONFIG_SIFIVE_PDMA', if_true: files('sifive_pdma.c'))
system_ss.add(when: 'CONFIG_XLNX_CSU_DMA', if_true: files('xlnx_csu_dma.c'))
+system_ss.add(when: 'CONFIG_ATCDMAC300', if_true: files('atcdmac300.c'))
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,171 @@
+/*
+ * Andes ATCDMAC300 (Andes Technology DMA Controller)
+ *
+ * Copyright (c) 2022 Andes Tech. Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>
+ *
+ */
+
+#ifndef ATCDMAC300_H
+#define ATCDMAC300_H
+
+#include "hw/sysbus.h"
+#include "qom/object.h"
+#include "qemu/coroutine.h"
+#include "block/aio.h"
+#include "sysemu/iothread.h"
+#include "sysemu/dma.h"
+
+#define TYPE_ATCDMAC300 "atcdmac300"
+OBJECT_DECLARE_SIMPLE_TYPE(ATCDMAC300State, ATCDMAC300)
+
+#define ATCDMAC300_IOPMP_SID 0
+
+#define ATCDMAC300_PRODUCT_ID 0x010230
+#define ATCDMAC300_REV_MAJOR 0x0
+#define ATCDMAC300_REV_MINOR 0x1
+
+/* DMAC Configuration Register (Offset 0x10) */
+#define ATCDMAC300_DMA_CFG 0x10
+#define DMA_CFG_CHAIN_XFR 31
+#define DMA_CFG_REQ_SYNC 30
+#define DMA_CFG_DATA_WITDTH 24
+#define DMA_CFG_ADDR_WIDTH 17
+#define DMA_CFG_CORE_NUM 16
+#define DMA_CFG_BUS_NUM 15
+#define DMA_CFG_REQ_NUM 10
+#define DMA_CFG_FIFO_DEPTH 4
+#define DMA_CFG_CHAN_NUM 0
+
+/* Interrupt Status Register (Offset 0x20) */
+#define ATCDMAC300_DMAC_CTRL 0x20
+
+/* Channel Abort Register (Offset 0x24) */
+#define ATCDMAC300_CHN_ABT 0x24
+
+/* Interrupt Status Register (Offset 0x30) */
+#define ATCDMAC300_INT_STATUS 0x30
+#define INT_STATUS_TC 16
+#define INT_STATUS_ABT 8
+#define INT_STATUS_ERR 0
+
+/* Interrupt Status Register (Offset 0x34) */
+#define ATCDMAC300_CHAN_ENABLE 0x34
+
+/* Channel n Control Register (Offset 0x40 + n*0x20) */
+#define CHAN_CTL_SRC_BUS_IDX 31
+#define CHAN_CTL_DST_BUS_IDX 30
+#define CHAN_CTL_PRIORITY 29
+#define CHAN_CTL_SRC_BURST_SZ 24
+#define CHAN_CTL_SRC_WIDTH 21
+#define CHAN_CTL_DST_WIDTH 18
+#define CHAN_CTL_SRC_MODE 17
+#define CHAN_CTL_DST_MODE 16
+#define CHAN_CTL_SRC_ADDR_CTL 14
+#define CHAN_CTL_DST_ADDR_CTL 12
+#define CHAN_CTL_SRC_REQ_SEL 8
+#define CHAN_CTL_DST_REQ_SEL 4
+#define CHAN_CTL_INT_ABT_MASK_POS 3
+#define CHAN_CTL_INT_ERR_MASK_POS 2
+#define CHAN_CTL_INT_TC_MASK_POS 1
+#define CHAN_CTL_ENABLE 0
+
+#define CHAN_CTL_SRC_WIDTH_MASK 0x7
+#define CHAN_CTL_DST_WIDTH_MASK 0x7
+#define CHAN_CTL_SRC_BURST_SZ_MASK 0xf
+#define CHAN_CTL_SRC_ADDR_CTL_MASK 0x3
+#define CHAN_CTL_DST_ADDR_CTL_MASK 0x3
+
+#define ATCDMAC300_CHAN_CTL 0x40
+#define ATCDMAC300_CHAN_TRAN_SZ 0x44
+#define ATCDMAC300_CHAN_SRC_ADDR 0x48
+#define ATCDMAC300_CHAN_SRC_ADDR_H 0x4C
+#define ATCDMAC300_CHAN_DST_ADDR 0x50
+#define ATCDMAC300_CHAN_DST_ADDR_H 0x54
+#define ATCDMAC300_CHAN_LL_POINTER 0x58
+#define ATCDMAC300_CHAN_LL_POINTER_H 0x5C
+
+#define ATCDMAC300_IRQ_START 0x40
+#define ATCDMAC300_IRQ_END (ATCDMAC300_IRQ_START + \
+ ATCDMAC300_MAX_CHAN)
+
+#define ATCDMAC300_MAX_BURST_SIZE 1024
+#define ATCDMAC300_MAX_CHAN 0x8
+
+#define PER_CHAN_OFFSET 0x20
+#define ATCDMAC300_FIRST_CHAN_BASE ATCDMAC300_CHAN_CTL
+#define ATCDMAC300_GET_CHAN(reg) (((reg - ATCDMAC300_FIRST_CHAN_BASE) / \
+ PER_CHAN_OFFSET))
+#define ATCDMAC300_GET_OFF(reg, ch) (reg - (ch * PER_CHAN_OFFSET))
+
+#define DMA_ABT_RESULT (1 << 3)
+
+typedef struct {
+ qemu_irq irq;
+
+ /* Channel control registers (n=0~7) */
+ uint32_t ChnCtrl;
+ uint32_t ChnTranSize;
+ uint32_t ChnSrcAddr;
+ uint64_t ChnSrcAddrH;
+ uint32_t ChnDstAddr;
+ uint64_t ChnDstAddrH;
+ uint32_t ChnLLPointer;
+ uint32_t ChnLLPointerH;
+} ATCDMAC300Chan;
+
+struct ATCDMAC300State {
+ /*< private >*/
+ SysBusDevice busdev;
+ /*< public >*/
+
+ qemu_irq irq;
+ MemoryRegion mmio;
+ uint32_t mmio_size;
+
+ /* ID and revision register */
+ uint32_t IdRev;
+
+ /* Configuration register */
+ uint32_t DMACfg;
+
+ /* Global control registers */
+ uint32_t DMACtrl;
+ uint32_t ChAbort;
+
+ /* Channel status registers */
+ uint32_t IntStatus;
+ uint32_t ChEN;
+
+ ATCDMAC300Chan chan[ATCDMAC300_MAX_CHAN];
+
+ /* To support iopmp */
+ AddressSpace *iopmp_as;
+ uint32_t sid;
+
+ Coroutine *co;
+ QEMUBH *bh;
+ bool running;
+ bool dma_bh_scheduled;
+ AioContext *ctx;
+ IOThread *iothread;
+};
+
+DeviceState *atcdmac300_create(const char *name, hwaddr addr, hwaddr mmio_size,
+ qemu_irq irq);
+
+void atcdmac300_connect_iopmp_as(DeviceState *dev, AddressSpace *iopmp_as,
+ uint32_t sid);
+
+#endif /* ATCDMAC300_H */
Signed-off-by: Ethan Chen <ethan84@andestech.com> --- hw/dma/Kconfig | 3 + hw/dma/atcdmac300.c | 435 ++++++++++++++++++++++++++++++++++++ hw/dma/meson.build | 1 + include/hw/dma/atcdmac300.h | 171 ++++++++++++++ 4 files changed, 610 insertions(+) create mode 100644 hw/dma/atcdmac300.c create mode 100644 include/hw/dma/atcdmac300.h