diff mbox series

[v7,10/13] hw/pci-host/gpex: Define properties for MMIO ranges

Message ID 20231103031649.2769834-11-sunilvl@ventanamicro.com (mailing list archive)
State New, archived
Headers show
Series RISC-V: ACPI: Enable AIA, PLIC and update RHCT | expand

Commit Message

Sunil V L Nov. 3, 2023, 3:16 a.m. UTC
ACPI DSDT generator needs information like ECAM range, PIO range, 32-bit
and 64-bit PCI MMIO range etc related to the PCI host bridge. Instead of
making these values machine specific, create properties for the GPEX
host bridge with default value 0. During initialization, the firmware
can initialize these properties with correct values for the platform.
This basically allows DSDT generator code independent of the machine
specific memory map accesses.

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
---
 hw/pci-host/gpex-acpi.c    | 13 +++++++++++++
 hw/pci-host/gpex.c         | 12 ++++++++++++
 include/hw/pci-host/gpex.h | 28 ++++++++++++++++++++--------
 3 files changed, 45 insertions(+), 8 deletions(-)

Comments

Michael S. Tsirkin Nov. 6, 2023, 5:37 p.m. UTC | #1
On Fri, Nov 03, 2023 at 08:46:46AM +0530, Sunil V L wrote:
> ACPI DSDT generator needs information like ECAM range, PIO range, 32-bit
> and 64-bit PCI MMIO range etc related to the PCI host bridge. Instead of
> making these values machine specific, create properties for the GPEX
> host bridge with default value 0. During initialization, the firmware
> can initialize these properties with correct values for the platform.
> This basically allows DSDT generator code independent of the machine
> specific memory map accesses.
> 
> Suggested-by: Igor Mammedov <imammedo@redhat.com>
> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> Acked-by: Alistair Francis <alistair.francis@wdc.com>
> Acked-by: Michael S. Tsirkin <mst@redhat.com>
> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
> ---
>  hw/pci-host/gpex-acpi.c    | 13 +++++++++++++
>  hw/pci-host/gpex.c         | 12 ++++++++++++
>  include/hw/pci-host/gpex.h | 28 ++++++++++++++++++++--------
>  3 files changed, 45 insertions(+), 8 deletions(-)
> 
> diff --git a/hw/pci-host/gpex-acpi.c b/hw/pci-host/gpex-acpi.c
> index 1092dc3b70..f69413ea2c 100644
> --- a/hw/pci-host/gpex-acpi.c
> +++ b/hw/pci-host/gpex-acpi.c
> @@ -281,3 +281,16 @@ void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
>  
>      crs_range_set_free(&crs_range_set);
>  }
> +
> +void acpi_dsdt_add_gpex_host(Aml *scope, uint32_t irq)
> +{
> +    bool ambig;
> +    Object *obj = object_resolve_path_type("", TYPE_GPEX_HOST, &ambig);
> +
> +    if (!obj || ambig) {
> +        return;
> +    }
> +
> +    GPEX_HOST(obj)->gpex_cfg.irq = irq;
> +    acpi_dsdt_add_gpex(scope, &GPEX_HOST(obj)->gpex_cfg);
> +}
> diff --git a/hw/pci-host/gpex.c b/hw/pci-host/gpex.c
> index a6752fac5e..41f4e73f6e 100644
> --- a/hw/pci-host/gpex.c
> +++ b/hw/pci-host/gpex.c
> @@ -154,6 +154,18 @@ static Property gpex_host_properties[] = {
>       */
>      DEFINE_PROP_BOOL("allow-unmapped-accesses", GPEXHost,
>                       allow_unmapped_accesses, true),
> +    DEFINE_PROP_UINT64(PCI_HOST_ECAM_BASE, GPEXHost, gpex_cfg.ecam.base, 0),
> +    DEFINE_PROP_SIZE(PCI_HOST_ECAM_SIZE, GPEXHost, gpex_cfg.ecam.size, 0),
> +    DEFINE_PROP_UINT64(PCI_HOST_PIO_BASE, GPEXHost, gpex_cfg.pio.base, 0),
> +    DEFINE_PROP_SIZE(PCI_HOST_PIO_SIZE, GPEXHost, gpex_cfg.pio.size, 0),
> +    DEFINE_PROP_UINT64(PCI_HOST_BELOW_4G_MMIO_BASE, GPEXHost,
> +                       gpex_cfg.mmio32.base, 0),
> +    DEFINE_PROP_SIZE(PCI_HOST_BELOW_4G_MMIO_SIZE, GPEXHost,
> +                     gpex_cfg.mmio32.size, 0),
> +    DEFINE_PROP_UINT64(PCI_HOST_ABOVE_4G_MMIO_BASE, GPEXHost,
> +                       gpex_cfg.mmio64.base, 0),
> +    DEFINE_PROP_SIZE(PCI_HOST_ABOVE_4G_MMIO_SIZE, GPEXHost,
> +                     gpex_cfg.mmio64.size, 0),
>      DEFINE_PROP_END_OF_LIST(),
>  };
>  
> diff --git a/include/hw/pci-host/gpex.h b/include/hw/pci-host/gpex.h
> index b0240bd768..441c6b8b20 100644
> --- a/include/hw/pci-host/gpex.h
> +++ b/include/hw/pci-host/gpex.h
> @@ -40,6 +40,15 @@ struct GPEXRootState {
>      /*< public >*/
>  };
>  
> +struct GPEXConfig {
> +    MemMapEntry ecam;
> +    MemMapEntry mmio32;
> +    MemMapEntry mmio64;
> +    MemMapEntry pio;
> +    int         irq;
> +    PCIBus      *bus;
> +};
> +
>  struct GPEXHost {
>      /*< private >*/
>      PCIExpressHost parent_obj;
> @@ -55,19 +64,22 @@ struct GPEXHost {
>      int irq_num[GPEX_NUM_IRQS];
>  
>      bool allow_unmapped_accesses;
> -};
>  
> -struct GPEXConfig {
> -    MemMapEntry ecam;
> -    MemMapEntry mmio32;
> -    MemMapEntry mmio64;
> -    MemMapEntry pio;
> -    int         irq;
> -    PCIBus      *bus;
> +    struct GPEXConfig gpex_cfg;
>  };
>  
>  int gpex_set_irq_num(GPEXHost *s, int index, int gsi);
>  
>  void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg);
> +void acpi_dsdt_add_gpex_host(Aml *scope, uint32_t irq);
> +
> +#define PCI_HOST_PIO_BASE               "pio-base"
> +#define PCI_HOST_PIO_SIZE               "pio-size"
> +#define PCI_HOST_ECAM_BASE              "ecam-base"
> +#define PCI_HOST_ECAM_SIZE              "ecam-size"
> +#define PCI_HOST_BELOW_4G_MMIO_BASE     "below-4g-mmio-base"
> +#define PCI_HOST_BELOW_4G_MMIO_SIZE     "below-4g-mmio-size"
> +#define PCI_HOST_ABOVE_4G_MMIO_BASE     "above-4g-mmio-base"
> +#define PCI_HOST_ABOVE_4G_MMIO_SIZE     "above-4g-mmio-size"

If there's no reason to allow users to tweak these directly
then I think we should prefix these with "x-" so users know
we don't commit to these as a stable API. Right?


>  #endif /* HW_GPEX_H */
> -- 
> 2.39.2
diff mbox series

Patch

diff --git a/hw/pci-host/gpex-acpi.c b/hw/pci-host/gpex-acpi.c
index 1092dc3b70..f69413ea2c 100644
--- a/hw/pci-host/gpex-acpi.c
+++ b/hw/pci-host/gpex-acpi.c
@@ -281,3 +281,16 @@  void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
 
     crs_range_set_free(&crs_range_set);
 }
+
+void acpi_dsdt_add_gpex_host(Aml *scope, uint32_t irq)
+{
+    bool ambig;
+    Object *obj = object_resolve_path_type("", TYPE_GPEX_HOST, &ambig);
+
+    if (!obj || ambig) {
+        return;
+    }
+
+    GPEX_HOST(obj)->gpex_cfg.irq = irq;
+    acpi_dsdt_add_gpex(scope, &GPEX_HOST(obj)->gpex_cfg);
+}
diff --git a/hw/pci-host/gpex.c b/hw/pci-host/gpex.c
index a6752fac5e..41f4e73f6e 100644
--- a/hw/pci-host/gpex.c
+++ b/hw/pci-host/gpex.c
@@ -154,6 +154,18 @@  static Property gpex_host_properties[] = {
      */
     DEFINE_PROP_BOOL("allow-unmapped-accesses", GPEXHost,
                      allow_unmapped_accesses, true),
+    DEFINE_PROP_UINT64(PCI_HOST_ECAM_BASE, GPEXHost, gpex_cfg.ecam.base, 0),
+    DEFINE_PROP_SIZE(PCI_HOST_ECAM_SIZE, GPEXHost, gpex_cfg.ecam.size, 0),
+    DEFINE_PROP_UINT64(PCI_HOST_PIO_BASE, GPEXHost, gpex_cfg.pio.base, 0),
+    DEFINE_PROP_SIZE(PCI_HOST_PIO_SIZE, GPEXHost, gpex_cfg.pio.size, 0),
+    DEFINE_PROP_UINT64(PCI_HOST_BELOW_4G_MMIO_BASE, GPEXHost,
+                       gpex_cfg.mmio32.base, 0),
+    DEFINE_PROP_SIZE(PCI_HOST_BELOW_4G_MMIO_SIZE, GPEXHost,
+                     gpex_cfg.mmio32.size, 0),
+    DEFINE_PROP_UINT64(PCI_HOST_ABOVE_4G_MMIO_BASE, GPEXHost,
+                       gpex_cfg.mmio64.base, 0),
+    DEFINE_PROP_SIZE(PCI_HOST_ABOVE_4G_MMIO_SIZE, GPEXHost,
+                     gpex_cfg.mmio64.size, 0),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/include/hw/pci-host/gpex.h b/include/hw/pci-host/gpex.h
index b0240bd768..441c6b8b20 100644
--- a/include/hw/pci-host/gpex.h
+++ b/include/hw/pci-host/gpex.h
@@ -40,6 +40,15 @@  struct GPEXRootState {
     /*< public >*/
 };
 
+struct GPEXConfig {
+    MemMapEntry ecam;
+    MemMapEntry mmio32;
+    MemMapEntry mmio64;
+    MemMapEntry pio;
+    int         irq;
+    PCIBus      *bus;
+};
+
 struct GPEXHost {
     /*< private >*/
     PCIExpressHost parent_obj;
@@ -55,19 +64,22 @@  struct GPEXHost {
     int irq_num[GPEX_NUM_IRQS];
 
     bool allow_unmapped_accesses;
-};
 
-struct GPEXConfig {
-    MemMapEntry ecam;
-    MemMapEntry mmio32;
-    MemMapEntry mmio64;
-    MemMapEntry pio;
-    int         irq;
-    PCIBus      *bus;
+    struct GPEXConfig gpex_cfg;
 };
 
 int gpex_set_irq_num(GPEXHost *s, int index, int gsi);
 
 void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg);
+void acpi_dsdt_add_gpex_host(Aml *scope, uint32_t irq);
+
+#define PCI_HOST_PIO_BASE               "pio-base"
+#define PCI_HOST_PIO_SIZE               "pio-size"
+#define PCI_HOST_ECAM_BASE              "ecam-base"
+#define PCI_HOST_ECAM_SIZE              "ecam-size"
+#define PCI_HOST_BELOW_4G_MMIO_BASE     "below-4g-mmio-base"
+#define PCI_HOST_BELOW_4G_MMIO_SIZE     "below-4g-mmio-size"
+#define PCI_HOST_ABOVE_4G_MMIO_BASE     "above-4g-mmio-base"
+#define PCI_HOST_ABOVE_4G_MMIO_SIZE     "above-4g-mmio-size"
 
 #endif /* HW_GPEX_H */