new file mode 100644
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2020-2023 Loongson Technology Corporation Limited
+ */
+
+#ifndef __UAPI_ASM_LOONGARCH_KVM_H
+#define __UAPI_ASM_LOONGARCH_KVM_H
+
+#include <linux/types.h>
+
+/*
+ * KVM LoongArch specific structures and definitions.
+ *
+ * Some parts derived from the x86 version of this file.
+ */
+
+#define __KVM_HAVE_READONLY_MEM
+
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+#define KVM_DIRTY_LOG_PAGE_OFFSET 64
+
+/*
+ * for KVM_GET_REGS and KVM_SET_REGS
+ */
+struct kvm_regs {
+ /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+ __u64 gpr[32];
+ __u64 pc;
+};
+
+/*
+ * for KVM_GET_FPU and KVM_SET_FPU
+ */
+struct kvm_fpu {
+ __u32 fcsr;
+ __u64 fcc; /* 8x8 */
+ struct kvm_fpureg {
+ __u64 val64[4];
+ } fpr[32];
+};
+
+/*
+ * For LoongArch, we use KVM_SET_ONE_REG and KVM_GET_ONE_REG to access various
+ * registers. The id field is broken down as follows:
+ *
+ * bits[63..52] - As per linux/kvm.h
+ * bits[51..32] - Must be zero.
+ * bits[31..16] - Register set.
+ *
+ * Register set = 0: GP registers from kvm_regs (see definitions below).
+ *
+ * Register set = 1: CSR registers.
+ *
+ * Register set = 2: KVM specific registers (see definitions below).
+ *
+ * Register set = 3: FPU / SIMD registers (see definitions below).
+ *
+ * Other sets registers may be added in the future. Each set would
+ * have its own identifier in bits[31..16].
+ */
+
+#define KVM_REG_LOONGARCH_GPR (KVM_REG_LOONGARCH | 0x00000ULL)
+#define KVM_REG_LOONGARCH_CSR (KVM_REG_LOONGARCH | 0x10000ULL)
+#define KVM_REG_LOONGARCH_KVM (KVM_REG_LOONGARCH | 0x20000ULL)
+#define KVM_REG_LOONGARCH_FPSIMD (KVM_REG_LOONGARCH | 0x30000ULL)
+#define KVM_REG_LOONGARCH_CPUCFG (KVM_REG_LOONGARCH | 0x40000ULL)
+#define KVM_REG_LOONGARCH_MASK (KVM_REG_LOONGARCH | 0x70000ULL)
+#define KVM_CSR_IDX_MASK 0x7fff
+#define KVM_CPUCFG_IDX_MASK 0x7fff
+
+/*
+ * KVM_REG_LOONGARCH_KVM - KVM specific control registers.
+ */
+
+#define KVM_REG_LOONGARCH_COUNTER (KVM_REG_LOONGARCH_KVM | KVM_REG_SIZE_U64 | 1)
+#define KVM_REG_LOONGARCH_VCPU_RESET (KVM_REG_LOONGARCH_KVM | KVM_REG_SIZE_U64 | 2)
+
+#define LOONGARCH_REG_SHIFT 3
+#define LOONGARCH_REG_64(TYPE, REG) (TYPE | KVM_REG_SIZE_U64 | (REG << LOONGARCH_REG_SHIFT))
+#define KVM_IOC_CSRID(REG) LOONGARCH_REG_64(KVM_REG_LOONGARCH_CSR, REG)
+#define KVM_IOC_CPUCFG(REG) LOONGARCH_REG_64(KVM_REG_LOONGARCH_CPUCFG, REG)
+
+struct kvm_debug_exit_arch {
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+};
+
+/* definition of registers in kvm_run */
+struct kvm_sync_regs {
+};
+
+/* dummy definition */
+struct kvm_sregs {
+};
+
+struct kvm_iocsr_entry {
+ __u32 addr;
+ __u32 pad;
+ __u64 data;
+};
+
+#define KVM_NR_IRQCHIPS 1
+#define KVM_IRQCHIP_NUM_PINS 64
+#define KVM_MAX_CORES 256
+
+#endif /* __UAPI_ASM_LOONGARCH_KVM_H */
@@ -264,6 +264,7 @@ struct kvm_xen_exit {
#define KVM_EXIT_RISCV_SBI 35
#define KVM_EXIT_RISCV_CSR 36
#define KVM_EXIT_NOTIFY 37
+#define KVM_EXIT_LOONGARCH_IOCSR 38
/* For KVM_EXIT_INTERNAL_ERROR */
/* Emulate instruction failed. */
@@ -336,6 +337,13 @@ struct kvm_run {
__u32 len;
__u8 is_write;
} mmio;
+ /* KVM_EXIT_LOONGARCH_IOCSR */
+ struct {
+ __u64 phys_addr;
+ __u8 data[8];
+ __u32 len;
+ __u8 is_write;
+ } iocsr_io;
/* KVM_EXIT_HYPERCALL */
struct {
__u64 nr;
@@ -1358,6 +1366,7 @@ struct kvm_dirty_tlb {
#define KVM_REG_ARM64 0x6000000000000000ULL
#define KVM_REG_MIPS 0x7000000000000000ULL
#define KVM_REG_RISCV 0x8000000000000000ULL
+#define KVM_REG_LOONGARCH 0x9000000000000000ULL
#define KVM_REG_SIZE_SHIFT 52
#define KVM_REG_SIZE_MASK 0x00f0000000000000ULL