diff mbox series

[v4,36/45] Add mailbox test constants

Message ID 20231208023145.1385775-37-sergey.kambalin@auriga.com (mailing list archive)
State New, archived
Headers show
Series Raspberry Pi 4B machine | expand

Commit Message

Sergey Kambalin Dec. 8, 2023, 2:31 a.m. UTC 
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
 tests/qtest/bcm2838-mailbox.h | 139 ++++++++++++++++++++++++++++++++++
 1 file changed, 139 insertions(+)

Comments

Peter Maydell Jan. 15, 2024, 2:55 p.m. UTC | #1 
On Fri, 8 Dec 2023 at 02:36, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
>  tests/qtest/bcm2838-mailbox.h | 139 ++++++++++++++++++++++++++++++++++
>  1 file changed, 139 insertions(+)
>
> diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
> index 1d02ca9c2c..8acc4bd2ff 100644
> --- a/tests/qtest/bcm2838-mailbox.h
> +++ b/tests/qtest/bcm2838-mailbox.h
> @@ -7,6 +7,145 @@
>   * See the COPYING file in the top-level directory.
>   */
>
> +#define MBOX0_BASE 0xFE00B880
> +#define MBOX1_BASE 0xFE00B8A0
> +
> +#define MBOX_REG_READ   0x00
> +#define MBOX_REG_WRITE  0x00
> +#define MBOX_REG_PEEK   0x10
> +#define MBOX_REG_SENDER 0x14
> +#define MBOX_REG_STATUS 0x18
> +#define MBOX_REG_CONFIG 0x1C
> +
> +#define MBOX_READ_EMPTY 0x40000000
> +
> +#define MBOX_CHANNEL_ID_PROPERTY 8
> +
> +#define MBOX_PROCESS_REQUEST      0x00000000
> +#define MBOX_SUCCESS              0x80000000
> +#define MBOX_ERROR_PARSING_BUFFER 0x80000001
> +
> +#define TAG_END                    0x00000000
> +#define TAG_GET_FIRMWARE_REVISION  0x00000001
> +#define TAG_GET_FIRMWARE_VARIANT   0x00000002
> +#define TAG_GET_BOARD_REVISION     0x00010002
> +#define TAG_GET_ARM_MEMORY         0x00010005
> +#define TAG_GET_VC_MEMORY          0x00010006
> +#define TAG_SET_DEVICE_POWER_STATE 0x00028001
> +#define TAG_GET_CLOCK_STATE        0x00030001
> +#define TAG_GET_CLOCK_RATE         0x00030002
> +#define TAG_GET_MAX_CLOCK_RATE     0x00030004
> +#define TAG_GET_MIN_CLOCK_RATE     0x00030007
> +#define TAG_GET_CLOCKS             0x00010007
> +#define TAG_GET_TEMPERATURE        0x00030006
> +#define TAG_GET_MAX_TEMPERATURE    0x0003000a
> +#define TAG_ALLOCATE_BUFFER        0x00040001
> +#define TAG_RELEASE_FRAMEBUFFER    0x00048001
> +#define TAG_BLANK_FRAMEBUFFER      0x00040002
> +#define TAG_GET_FB_PHYS_WIDTH      0x00040003
> +#define TAG_TEST_FB_PHYS_WIDTH     0x00044003
> +#define TAG_SET_FB_PHYS_WIDTH      0x00048003
> +#define TAG_GET_FB_VIRT_WIDTH      0x00040004
> +#define TAG_TEST_FB_VIRT_WIDTH     0x00044004
> +#define TAG_SET_FB_VIRT_WIDTH      0x00048004
> +#define TAG_GET_FB_DEPTH           0x00040005
> +#define TAG_TEST_FB_DEPTH          0x00044005
> +#define TAG_SET_FB_DEPTH           0x00048005
> +#define TAG_GET_PIXEL_ORDER        0x00040006
> +#define TAG_TEST_PIXEL_ORDER       0x00044006
> +#define TAG_SET_PIXEL_ORDER        0x00048006
> +#define TAG_GET_FB_ALPHA_MODE      0x00040007
> +#define TAG_TEST_FB_ALPHA_MODE     0x00044007
> +#define TAG_SET_FB_ALPHA_MODE      0x00048007
> +#define TAG_GET_PITCH              0x00040008
> +#define TAG_SET_PITCH              0x00048008
> +#define TAG_GET_VIRTUAL_OFFSET     0x00040009
> +#define TAG_TEST_VIRTUAL_OFFSET    0x00044009
> +#define TAG_SET_VIRTUAL_OFFSET     0x00048009
> +#define TAG_GET_OVERSCAN           0x0004000a
> +#define TAG_TEST_OVERSCAN          0x0004400a
> +#define TAG_SET_OVERSCAN           0x0004800a
> +#define TAG_SET_PALETTE            0x0004800b
> +#define TAG_GET_COMMANDLINE        0x00050001
> +#define TAG_GET_DMA_CHANNELS       0x00060001
> +#define TAG_GET_THROTTLED          0x00030046
> +#define TAG_GET_NUM_DISPLAYS       0x00040013
> +#define TAG_GET_DISPLAY_SETTINGS   0x00040014
> +#define TAG_GET_GPIO_CONFIG        0x00030043
> +#define TAG_SET_GPIO_CONFIG        0x00038043
> +#define TAG_GET_GPIO_STATE         0x00030041
> +#define TAG_SET_GPIO_STATE         0x00038041
> +#define TAG_INITIALIZE_VCHIQ       0x00048010

We already have definitions for the tags in
include/hw/arm/raspberrypi-fw-defs.h so we can
use those instead of defining them over again.

thanks
-- PMM
diff mbox series

Patch

diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
index 1d02ca9c2c..8acc4bd2ff 100644
--- a/tests/qtest/bcm2838-mailbox.h
+++ b/tests/qtest/bcm2838-mailbox.h
@@ -7,6 +7,145 @@ 
  * See the COPYING file in the top-level directory.
  */
 
+#define MBOX0_BASE 0xFE00B880
+#define MBOX1_BASE 0xFE00B8A0
+
+#define MBOX_REG_READ   0x00
+#define MBOX_REG_WRITE  0x00
+#define MBOX_REG_PEEK   0x10
+#define MBOX_REG_SENDER 0x14
+#define MBOX_REG_STATUS 0x18
+#define MBOX_REG_CONFIG 0x1C
+
+#define MBOX_READ_EMPTY 0x40000000
+
+#define MBOX_CHANNEL_ID_PROPERTY 8
+
+#define MBOX_PROCESS_REQUEST      0x00000000
+#define MBOX_SUCCESS              0x80000000
+#define MBOX_ERROR_PARSING_BUFFER 0x80000001
+
+#define TAG_END                    0x00000000
+#define TAG_GET_FIRMWARE_REVISION  0x00000001
+#define TAG_GET_FIRMWARE_VARIANT   0x00000002
+#define TAG_GET_BOARD_REVISION     0x00010002
+#define TAG_GET_ARM_MEMORY         0x00010005
+#define TAG_GET_VC_MEMORY          0x00010006
+#define TAG_SET_DEVICE_POWER_STATE 0x00028001
+#define TAG_GET_CLOCK_STATE        0x00030001
+#define TAG_GET_CLOCK_RATE         0x00030002
+#define TAG_GET_MAX_CLOCK_RATE     0x00030004
+#define TAG_GET_MIN_CLOCK_RATE     0x00030007
+#define TAG_GET_CLOCKS             0x00010007
+#define TAG_GET_TEMPERATURE        0x00030006
+#define TAG_GET_MAX_TEMPERATURE    0x0003000a
+#define TAG_ALLOCATE_BUFFER        0x00040001
+#define TAG_RELEASE_FRAMEBUFFER    0x00048001
+#define TAG_BLANK_FRAMEBUFFER      0x00040002
+#define TAG_GET_FB_PHYS_WIDTH      0x00040003
+#define TAG_TEST_FB_PHYS_WIDTH     0x00044003
+#define TAG_SET_FB_PHYS_WIDTH      0x00048003
+#define TAG_GET_FB_VIRT_WIDTH      0x00040004
+#define TAG_TEST_FB_VIRT_WIDTH     0x00044004
+#define TAG_SET_FB_VIRT_WIDTH      0x00048004
+#define TAG_GET_FB_DEPTH           0x00040005
+#define TAG_TEST_FB_DEPTH          0x00044005
+#define TAG_SET_FB_DEPTH           0x00048005
+#define TAG_GET_PIXEL_ORDER        0x00040006
+#define TAG_TEST_PIXEL_ORDER       0x00044006
+#define TAG_SET_PIXEL_ORDER        0x00048006
+#define TAG_GET_FB_ALPHA_MODE      0x00040007
+#define TAG_TEST_FB_ALPHA_MODE     0x00044007
+#define TAG_SET_FB_ALPHA_MODE      0x00048007
+#define TAG_GET_PITCH              0x00040008
+#define TAG_SET_PITCH              0x00048008
+#define TAG_GET_VIRTUAL_OFFSET     0x00040009
+#define TAG_TEST_VIRTUAL_OFFSET    0x00044009
+#define TAG_SET_VIRTUAL_OFFSET     0x00048009
+#define TAG_GET_OVERSCAN           0x0004000a
+#define TAG_TEST_OVERSCAN          0x0004400a
+#define TAG_SET_OVERSCAN           0x0004800a
+#define TAG_SET_PALETTE            0x0004800b
+#define TAG_GET_COMMANDLINE        0x00050001
+#define TAG_GET_DMA_CHANNELS       0x00060001
+#define TAG_GET_THROTTLED          0x00030046
+#define TAG_GET_NUM_DISPLAYS       0x00040013
+#define TAG_GET_DISPLAY_SETTINGS   0x00040014
+#define TAG_GET_GPIO_CONFIG        0x00030043
+#define TAG_SET_GPIO_CONFIG        0x00038043
+#define TAG_GET_GPIO_STATE         0x00030041
+#define TAG_SET_GPIO_STATE         0x00038041
+#define TAG_INITIALIZE_VCHIQ       0x00048010
+
+#define BOARD_REVISION    11546898
+#define FIRMWARE_REVISION 346337
+#define FIRMWARE_VARIANT  0x77777777 /* TODO: Find the real value */
+
+#define ARM_MEMORY_BASE 0x00000000
+#define ARM_MEMORY_SIZE 0x3c000000
+#define VC_MEMORY_BASE  0x3c000000
+#define VC_MEMORY_SIZE  0x04000000
+#define VC_FB_BASE      0x3c100000
+#define VC_FB_SIZE      0x00096000
+
+#define CLOCK_ID_ROOT      0x00000000
+#define CLOCK_ID_EMMC      0x00000001
+#define CLOCK_ID_UART      0x00000002
+#define CLOCK_ID_ARM       0x00000003
+#define CLOCK_ID_CORE      0x00000004
+#define CLOCK_ID_UNDEFINED 0x12345678
+
+#define CLOCK_RATE_EMMC 50000000
+#define CLOCK_RATE_UART 3000000
+#define CLOCK_RATE_CORE 350000000
+#define CLOCK_RATE_ANY  700000000
+
+#define DEVICE_ID_SD_CARD   0x00000000
+#define DEVICE_ID_UART0     0x00000001
+#define DEVICE_ID_UART1     0x00000002
+#define DEVICE_ID_USB HCD   0x00000003
+#define DEVICE_ID_I2C0      0x00000004
+#define DEVICE_ID_I2C1      0x00000005
+#define DEVICE_ID_I2C2      0x00000006
+#define DEVICE_ID_SPI       0x00000007
+#define DEVICE_ID_CCP2TX    0x00000008
+#define DEVICE_ID_UNKNOWN_0 0x00000009
+#define DEVICE_ID_UNKNOWN_1 0x0000000a
+
+#define TEMPERATURE_ID_SOC 0x00000000
+
+#define TEMPERATURE_SOC     25000
+#define TEMPERATURE_SOC_MAX 99000
+
+#define ALIGN_4K 4096
+
+#define PIXEL_ORDER_BGR 0
+#define PIXEL_ORDER_RGB 1
+
+#define ALPHA_MODE_ENABLED  0
+#define ALPHA_MODE_REVERSED 1
+#define ALPHA_MODE_IGNORED  2
+
+#define GPIO_MASK 0x003c
+
+#define GPIO_0 0x00000080
+
+#define GPIO_DIRECTION_IN  0
+#define GPIO_DIRECTION_OUT 1
+
+#define GPIO_TERMINATION_DISABLED 0
+#define GPIO_TERMINATION_ENABLED  1
+
+#define GPIO_TERMINATION_PULLUP_DISABLED 0
+#define GPIO_TERMINATION_PULLUP_ENABLED  1
+
+#define GPIO_POLARITY_LOW  0
+#define GPIO_POLARITY_HIGH 1
+
+#define GPIO_STATE_DOWN 0
+
+/* Used to test stubs that don't perform actual work */
+#define DUMMY_VALUE 0x12345678
 
 REG32(MBOX_WRITE_REG, 0)
 FIELD(MBOX_WRITE_REG, CHANNEL, 0, 4)