| Message ID | 20240209185506.248001-1-thuth@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | hw/hppa/Kconfig: Fix building with "configure --without-default-devices" | expand |
On 2/9/24 19:55, Thomas Huth wrote: > When running "configure" with "--without-default-devices", building > of qemu-system-hppa currently fails with: > > /usr/bin/ld: libqemu-hppa-softmmu.fa.p/hw_hppa_machine.c.o: in function `machine_HP_common_init_tail': > hw/hppa/machine.c:399: undefined reference to `usb_bus_find' > /usr/bin/ld: hw/hppa/machine.c:399: undefined reference to `usb_create_simple' > /usr/bin/ld: hw/hppa/machine.c:400: undefined reference to `usb_bus_find' > /usr/bin/ld: hw/hppa/machine.c:400: undefined reference to `usb_create_simple' > collect2: error: ld returned 1 exit status > ninja: build stopped: subcommand failed. > make: *** [Makefile:162: run-ninja] Error 1 > > And after fixing this, the qemu-system-hppa binary refuses to run > due to the missing 'pci-ohci' and 'pci-serial' devices. Let's add > the right config switches to fix these problems. > > Signed-off-by: Thomas Huth <thuth@redhat.com> > --- > hw/hppa/Kconfig | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/hw/hppa/Kconfig b/hw/hppa/Kconfig > index ff8528aaa8..124d5e9e47 100644 > --- a/hw/hppa/Kconfig > +++ b/hw/hppa/Kconfig > @@ -6,7 +6,7 @@ config HPPA_B160L > select ASTRO > select DINO > select LASI > - select SERIAL > + select SERIAL_PCI I think the "SERIAL" is needed too for the B160L machine. Other than that, Acked-by: Helge Deller <deller@gmx.de> Thank you! Helge > select ISA_BUS > select I8259 > select IDE_CMD646 > @@ -16,3 +16,4 @@ config HPPA_B160L > select LASIPS2 > select PARALLEL > select ARTIST > + select USB_OHCI_PCI
On Fri, 9 Feb 2024, Helge Deller wrote: > On 2/9/24 19:55, Thomas Huth wrote: >> When running "configure" with "--without-default-devices", building >> of qemu-system-hppa currently fails with: >> >> /usr/bin/ld: libqemu-hppa-softmmu.fa.p/hw_hppa_machine.c.o: in function >> `machine_HP_common_init_tail': >> hw/hppa/machine.c:399: undefined reference to `usb_bus_find' >> /usr/bin/ld: hw/hppa/machine.c:399: undefined reference to >> `usb_create_simple' >> /usr/bin/ld: hw/hppa/machine.c:400: undefined reference to `usb_bus_find' >> /usr/bin/ld: hw/hppa/machine.c:400: undefined reference to >> `usb_create_simple' >> collect2: error: ld returned 1 exit status >> ninja: build stopped: subcommand failed. >> make: *** [Makefile:162: run-ninja] Error 1 >> >> And after fixing this, the qemu-system-hppa binary refuses to run >> due to the missing 'pci-ohci' and 'pci-serial' devices. Let's add >> the right config switches to fix these problems. >> >> Signed-off-by: Thomas Huth <thuth@redhat.com> >> --- >> hw/hppa/Kconfig | 3 ++- >> 1 file changed, 2 insertions(+), 1 deletion(-) >> >> diff --git a/hw/hppa/Kconfig b/hw/hppa/Kconfig >> index ff8528aaa8..124d5e9e47 100644 >> --- a/hw/hppa/Kconfig >> +++ b/hw/hppa/Kconfig >> @@ -6,7 +6,7 @@ config HPPA_B160L >> select ASTRO >> select DINO >> select LASI >> - select SERIAL >> + select SERIAL_PCI > > I think the "SERIAL" is needed too for the B160L machine. SERIAL_PCI selects SERIAL so I think it should be pulled in without listing it separately but not sure what's the policy for these configs. Regards, BALATON Zoltan > Other than that, > > Acked-by: Helge Deller <deller@gmx.de> > > Thank you! > Helge > >> select ISA_BUS >> select I8259 >> select IDE_CMD646 >> @@ -16,3 +16,4 @@ config HPPA_B160L >> select LASIPS2 >> select PARALLEL >> select ARTIST >> + select USB_OHCI_PCI > > >
On 9/2/24 20:46, BALATON Zoltan wrote: > On Fri, 9 Feb 2024, Helge Deller wrote: >> On 2/9/24 19:55, Thomas Huth wrote: >>> When running "configure" with "--without-default-devices", building >>> of qemu-system-hppa currently fails with: >>> >>> /usr/bin/ld: libqemu-hppa-softmmu.fa.p/hw_hppa_machine.c.o: in >>> function `machine_HP_common_init_tail': >>> hw/hppa/machine.c:399: undefined reference to `usb_bus_find' >>> /usr/bin/ld: hw/hppa/machine.c:399: undefined reference to >>> `usb_create_simple' >>> /usr/bin/ld: hw/hppa/machine.c:400: undefined reference to >>> `usb_bus_find' >>> /usr/bin/ld: hw/hppa/machine.c:400: undefined reference to >>> `usb_create_simple' >>> collect2: error: ld returned 1 exit status >>> ninja: build stopped: subcommand failed. >>> make: *** [Makefile:162: run-ninja] Error 1 >>> >>> And after fixing this, the qemu-system-hppa binary refuses to run >>> due to the missing 'pci-ohci' and 'pci-serial' devices. Let's add >>> the right config switches to fix these problems. >>> >>> Signed-off-by: Thomas Huth <thuth@redhat.com> >>> --- >>> hw/hppa/Kconfig | 3 ++- >>> 1 file changed, 2 insertions(+), 1 deletion(-) >>> >>> diff --git a/hw/hppa/Kconfig b/hw/hppa/Kconfig >>> index ff8528aaa8..124d5e9e47 100644 >>> --- a/hw/hppa/Kconfig >>> +++ b/hw/hppa/Kconfig >>> @@ -6,7 +6,7 @@ config HPPA_B160L >>> select ASTRO >>> select DINO >>> select LASI >>> - select SERIAL >>> + select SERIAL_PCI >> >> I think the "SERIAL" is needed too for the B160L machine. > > SERIAL_PCI selects SERIAL so I think it should be pulled in without > listing it separately but not sure what's the policy for these configs. We prefer explicit dependencies. SERIAL is for Lasi/Dino serial_mm_init(). Although pulling in SERIAL, SERIAL_PCI is for pci-serial*. > Regards, > BALATON Zoltan > >> Other than that, >> >> Acked-by: Helge Deller <deller@gmx.de> >> >> Thank you! >> Helge >> >>> select ISA_BUS >>> select I8259 >>> select IDE_CMD646 >>> @@ -16,3 +16,4 @@ config HPPA_B160L >>> select LASIPS2 >>> select PARALLEL >>> select ARTIST >>> + select USB_OHCI_PCI >> >> >> >
On 09/02/2024 21.42, Philippe Mathieu-Daudé wrote: > On 9/2/24 20:46, BALATON Zoltan wrote: >> On Fri, 9 Feb 2024, Helge Deller wrote: >>> On 2/9/24 19:55, Thomas Huth wrote: >>>> When running "configure" with "--without-default-devices", building >>>> of qemu-system-hppa currently fails with: >>>> >>>> /usr/bin/ld: libqemu-hppa-softmmu.fa.p/hw_hppa_machine.c.o: in >>>> function `machine_HP_common_init_tail': >>>> hw/hppa/machine.c:399: undefined reference to `usb_bus_find' >>>> /usr/bin/ld: hw/hppa/machine.c:399: undefined reference to >>>> `usb_create_simple' >>>> /usr/bin/ld: hw/hppa/machine.c:400: undefined reference to `usb_bus_find' >>>> /usr/bin/ld: hw/hppa/machine.c:400: undefined reference to >>>> `usb_create_simple' >>>> collect2: error: ld returned 1 exit status >>>> ninja: build stopped: subcommand failed. >>>> make: *** [Makefile:162: run-ninja] Error 1 >>>> >>>> And after fixing this, the qemu-system-hppa binary refuses to run >>>> due to the missing 'pci-ohci' and 'pci-serial' devices. Let's add >>>> the right config switches to fix these problems. >>>> >>>> Signed-off-by: Thomas Huth <thuth@redhat.com> >>>> --- >>>> hw/hppa/Kconfig | 3 ++- >>>> 1 file changed, 2 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/hw/hppa/Kconfig b/hw/hppa/Kconfig >>>> index ff8528aaa8..124d5e9e47 100644 >>>> --- a/hw/hppa/Kconfig >>>> +++ b/hw/hppa/Kconfig >>>> @@ -6,7 +6,7 @@ config HPPA_B160L >>>> select ASTRO >>>> select DINO >>>> select LASI >>>> - select SERIAL >>>> + select SERIAL_PCI >>> >>> I think the "SERIAL" is needed too for the B160L machine. >> >> SERIAL_PCI selects SERIAL so I think it should be pulled in without >> listing it separately Yes, that was my thinking when I replaced it. > We prefer explicit dependencies. > > SERIAL is for Lasi/Dino serial_mm_init(). > > Although pulling in SERIAL, SERIAL_PCI is for pci-serial*. Ok, I can respin the patch to add SERIAL_PCI in addition instead of replacing SERIAL. Thomas >> Regards, >> BALATON Zoltan >> >>> Other than that, >>> >>> Acked-by: Helge Deller <deller@gmx.de> >>> >>> Thank you! >>> Helge >>> >>>> select ISA_BUS >>>> select I8259 >>>> select IDE_CMD646 >>>> @@ -16,3 +16,4 @@ config HPPA_B160L >>>> select LASIPS2 >>>> select PARALLEL >>>> select ARTIST >>>> + select USB_OHCI_PCI >>> >>> >>> >> >
diff --git a/hw/hppa/Kconfig b/hw/hppa/Kconfig index ff8528aaa8..124d5e9e47 100644 --- a/hw/hppa/Kconfig +++ b/hw/hppa/Kconfig @@ -6,7 +6,7 @@ config HPPA_B160L select ASTRO select DINO select LASI - select SERIAL + select SERIAL_PCI select ISA_BUS select I8259 select IDE_CMD646 @@ -16,3 +16,4 @@ config HPPA_B160L select LASIPS2 select PARALLEL select ARTIST + select USB_OHCI_PCI
When running "configure" with "--without-default-devices", building of qemu-system-hppa currently fails with: /usr/bin/ld: libqemu-hppa-softmmu.fa.p/hw_hppa_machine.c.o: in function `machine_HP_common_init_tail': hw/hppa/machine.c:399: undefined reference to `usb_bus_find' /usr/bin/ld: hw/hppa/machine.c:399: undefined reference to `usb_create_simple' /usr/bin/ld: hw/hppa/machine.c:400: undefined reference to `usb_bus_find' /usr/bin/ld: hw/hppa/machine.c:400: undefined reference to `usb_create_simple' collect2: error: ld returned 1 exit status ninja: build stopped: subcommand failed. make: *** [Makefile:162: run-ninja] Error 1 And after fixing this, the qemu-system-hppa binary refuses to run due to the missing 'pci-ohci' and 'pci-serial' devices. Let's add the right config switches to fix these problems. Signed-off-by: Thomas Huth <thuth@redhat.com> --- hw/hppa/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)