@@ -12,11 +12,220 @@
#include "hw/irq.h"
#include "hw/pci-host/gpex.h"
#include "hw/qdev-properties.h"
-#include "migration/vmstate.h"
-#include "qemu/module.h"
#include "hw/arm/bcm2838_pcie.h"
#include "trace.h"
+static uint32_t bcm2838_pcie_config_read(PCIDevice *d,
+ uint32_t address, int len)
+{
+ return pci_default_read_config(d, address, len);
+}
+
+static void bcm2838_pcie_config_write(PCIDevice *d, uint32_t addr, uint32_t val,
+ int len)
+{
+ return pci_default_write_config(d, addr, val, len);
+}
+
+static uint64_t bcm2838_pcie_host_read(void *opaque, hwaddr offset,
+ unsigned size) {
+ hwaddr mmcfg_addr;
+ uint64_t value = ~0;
+ BCM2838PcieHostState *s = opaque;
+ PCIExpressHost *pcie_hb = PCIE_HOST_BRIDGE(s);
+ uint8_t *root_regs = s->root_port.regs;
+ uint32_t *cfg_idx = (uint32_t *)(root_regs + BCM2838_PCIE_EXT_CFG_INDEX
+ - PCIE_CONFIG_SPACE_SIZE);
+
+ if (offset - PCIE_CONFIG_SPACE_SIZE + size <= sizeof(s->root_port.regs)) {
+ switch (offset) {
+ case BCM2838_PCIE_EXT_CFG_DATA
+ ... BCM2838_PCIE_EXT_CFG_DATA + PCIE_CONFIG_SPACE_SIZE - 1:
+ mmcfg_addr = *cfg_idx
+ | PCIE_MMCFG_CONFOFFSET(offset - BCM2838_PCIE_EXT_CFG_DATA);
+ value = pcie_hb->mmio.ops->read(opaque, mmcfg_addr, size);
+ break;
+ default:
+ memcpy(&value, root_regs + offset - PCIE_CONFIG_SPACE_SIZE, size);
+ }
+ } else {
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
+ __func__, size, offset);
+ }
+
+ trace_bcm2838_pcie_host_read(size, offset, value);
+ return value;
+}
+
+static void bcm2838_pcie_host_write(void *opaque, hwaddr offset,
+ uint64_t value, unsigned size) {
+ hwaddr mmcfg_addr;
+ BCM2838PcieHostState *s = opaque;
+ PCIExpressHost *pcie_hb = PCIE_HOST_BRIDGE(s);
+ uint8_t *root_regs = s->root_port.regs;
+ uint32_t *cfg_idx = (uint32_t *)(root_regs + BCM2838_PCIE_EXT_CFG_INDEX
+ - PCIE_CONFIG_SPACE_SIZE);
+
+ trace_bcm2838_pcie_host_write(size, offset, value);
+
+ if (offset - PCIE_CONFIG_SPACE_SIZE + size <= sizeof(s->root_port.regs)) {
+ switch (offset) {
+ case BCM2838_PCIE_EXT_CFG_DATA
+ ... BCM2838_PCIE_EXT_CFG_DATA + PCIE_CONFIG_SPACE_SIZE - 1:
+ mmcfg_addr = *cfg_idx
+ | PCIE_MMCFG_CONFOFFSET(offset - BCM2838_PCIE_EXT_CFG_DATA);
+ pcie_hb->mmio.ops->write(opaque, mmcfg_addr, value, size);
+ break;
+ default:
+ memcpy(root_regs + offset - PCIE_CONFIG_SPACE_SIZE, &value, size);
+ }
+ } else {
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
+ __func__, size, offset);
+ }
+}
+
+static const MemoryRegionOps bcm2838_pcie_host_ops = {
+ .read = bcm2838_pcie_host_read,
+ .write = bcm2838_pcie_host_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {.max_access_size = sizeof(uint64_t)},
+};
+
+int bcm2838_pcie_host_set_irq_num(BCM2838PcieHostState *s, int index, int spi)
+{
+ if (index >= BCM2838_PCIE_NUM_IRQS) {
+ return -EINVAL;
+ }
+
+ s->irq_num[index] = spi;
+ return 0;
+}
+
+static void bcm2838_pcie_host_set_irq(void *opaque, int irq_num, int level)
+{
+ BCM2838PcieHostState *s = opaque;
+
+ qemu_set_irq(s->irq[irq_num], level);
+}
+
+static PCIINTxRoute bcm2838_pcie_host_route_intx_pin_to_irq(void *opaque,
+ int pin)
+{
+ PCIINTxRoute route;
+ BCM2838PcieHostState *s = opaque;
+
+ route.irq = s->irq_num[pin];
+ route.mode = route.irq < 0 ? PCI_INTX_DISABLED : PCI_INTX_ENABLED;
+
+ return route;
+}
+
+static int bcm2838_pcie_host_map_irq(PCIDevice *pci_dev, int pin)
+{
+ return pin;
+}
+
+static void bcm2838_pcie_host_realize(DeviceState *dev, Error **errp)
+{
+ PCIHostState *pci = PCI_HOST_BRIDGE(dev);
+ BCM2838PcieHostState *s = BCM2838_PCIE_HOST(dev);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+
+ int i;
+
+ memory_region_init_io(&s->cfg_regs, OBJECT(s), &bcm2838_pcie_host_ops, s,
+ "bcm2838_pcie_cfg_regs", BCM2838_PCIE_REGS_SIZE);
+ sysbus_init_mmio(sbd, &s->cfg_regs);
+
+ /*
+ * The MemoryRegions io_mmio and io_ioport that we pass to
+ * pci_register_root_bus() are not the same as the MemoryRegions
+ * io_mmio_window and io_ioport_window that we expose as SysBus MRs.
+ * The difference is in the behavior of accesses to addresses where no PCI
+ * device has been mapped.
+ *
+ * io_mmio and io_ioport are the underlying PCI view of the PCI address
+ * space, and when a PCI device does a bus master access to a bad address
+ * this is reported back to it as a transaction failure.
+ *
+ * io_mmio_window and io_ioport_window implement "unmapped addresses read as
+ * -1 and ignore writes"; this is a traditional x86 PC behavior, which is
+ * not mandated properly by the PCI spec but expected by the majority of
+ * PCI-using guest software, including Linux.
+ *
+ * We implement it in the PCIe host controller, by providing the *_window
+ * MRs, which are containers with io ops that implement the 'background'
+ * behavior and which hold the real PCI MRs as sub-regions.
+ */
+ memory_region_init(&s->io_mmio, OBJECT(s), "bcm2838_pcie_mmio", UINT64_MAX);
+ memory_region_init(&s->io_ioport, OBJECT(s), "bcm2838_pcie_ioport",
+ 64 * 1024);
+
+ memory_region_init_io(&s->io_mmio_window, OBJECT(s),
+ &unassigned_io_ops, OBJECT(s),
+ "bcm2838_pcie_mmio_window", UINT64_MAX);
+ memory_region_init_io(&s->io_ioport_window, OBJECT(s),
+ &unassigned_io_ops, OBJECT(s),
+ "bcm2838_pcie_ioport_window", 64 * 1024);
+
+ memory_region_add_subregion(&s->io_mmio_window, 0, &s->io_mmio);
+ memory_region_add_subregion(&s->io_ioport_window, 0, &s->io_ioport);
+ sysbus_init_mmio(sbd, &s->io_mmio_window);
+ sysbus_init_mmio(sbd, &s->io_ioport_window);
+
+ for (i = 0; i < BCM2838_PCIE_NUM_IRQS; i++) {
+ sysbus_init_irq(sbd, &s->irq[i]);
+ s->irq_num[i] = -1;
+ }
+
+ pci->bus = pci_register_root_bus(dev, "pcie.0", bcm2838_pcie_host_set_irq,
+ bcm2838_pcie_host_map_irq, s, &s->io_mmio,
+ &s->io_ioport, 0, BCM2838_PCIE_NUM_IRQS,
+ TYPE_PCIE_BUS);
+ pci_bus_set_route_irq_fn(pci->bus, bcm2838_pcie_host_route_intx_pin_to_irq);
+ qdev_realize(DEVICE(&s->root_port), BUS(pci->bus), &error_fatal);
+}
+
+static const char *bcm2838_pcie_host_root_bus_path(PCIHostState *host_bridge,
+ PCIBus *rootbus)
+{
+ return "0000:00";
+}
+
+static void bcm2838_pcie_host_class_init(ObjectClass *class, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(class);
+ PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(class);
+
+ hc->root_bus_path = bcm2838_pcie_host_root_bus_path;
+ dc->realize = bcm2838_pcie_host_realize;
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+ dc->fw_name = "pci";
+}
+
+static void bcm2838_pcie_host_initfn(Object *obj)
+{
+ BCM2838PcieHostState *s = BCM2838_PCIE_HOST(obj);
+ BCM2838PcieRootState *root = &s->root_port;
+
+ object_initialize_child(obj, "root_port", root, TYPE_BCM2838_PCIE_ROOT);
+ qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0));
+ qdev_prop_set_bit(DEVICE(root), "multifunction", false);
+}
+
+static const TypeInfo bcm2838_pcie_host_info = {
+ .name = TYPE_BCM2838_PCIE_HOST,
+ .parent = TYPE_PCIE_HOST_BRIDGE,
+ .instance_size = sizeof(BCM2838PcieHostState),
+ .instance_init = bcm2838_pcie_host_initfn,
+ .class_init = bcm2838_pcie_host_class_init,
+};
+
/*
* RC root part (D0:F0)
*/
@@ -62,6 +271,9 @@ static void bcm2838_pcie_root_class_init(ObjectClass *class, void *data)
k->device_id = BCM2838_PCIE_DEVICE_ID;
k->revision = BCM2838_PCIE_REVISION;
+ k->config_read = bcm2838_pcie_config_read;
+ k->config_write = bcm2838_pcie_config_write;
+
rpc->exp_offset = BCM2838_PCIE_EXP_CAP_OFFSET;
rpc->aer_offset = BCM2838_PCIE_AER_CAP_OFFSET;
}
@@ -77,6 +289,7 @@ static const TypeInfo bcm2838_pcie_root_info = {
static void bcm2838_pcie_register(void)
{
type_register_static(&bcm2838_pcie_root_info);
+ type_register_static(&bcm2838_pcie_host_info);
}
type_init(bcm2838_pcie_register)
@@ -73,3 +73,7 @@ xen_enable_tpm(uint64_t addr) "Connected tpmdev at address 0x%"PRIx64
# bcm2838.c
bcm2838_gic_set_irq(int irq, int level) "gic irq:%d lvl:%d"
+
+# bcm2838_pcie.c
+bcm2838_pcie_host_read(unsigned int size, uint64_t offset, uint64_t value) "%u bytes @ 0x%04"PRIx64": 0x%016"PRIx64
+bcm2838_pcie_host_write(unsigned int size, uint64_t offset, uint64_t value) "%u bytes @ 0x%04"PRIx64": 0x%016"PRIx64
@@ -16,6 +16,9 @@
#include "hw/pci/pcie_port.h"
#include "qom/object.h"
+#define TYPE_BCM2838_PCIE_HOST "bcm2838-pcie-host"
+OBJECT_DECLARE_SIMPLE_TYPE(BCM2838PcieHostState, BCM2838_PCIE_HOST)
+
#define TYPE_BCM2838_PCIE_ROOT "bcm2838-pcie-root"
OBJECT_DECLARE_TYPE(BCM2838PcieRootState, BCM2838PcieRootClass,
BCM2838_PCIE_ROOT)
@@ -50,4 +53,23 @@ struct BCM2838PcieRootClass {
};
+struct BCM2838PcieHostState {
+ /*< private >*/
+ PCIExpressHost parent_obj;
+
+ /*< public >*/
+ BCM2838PcieRootState root_port;
+
+ MemoryRegion cfg_regs;
+ MemoryRegion io_ioport;
+ MemoryRegion io_mmio;
+ MemoryRegion io_ioport_window;
+ MemoryRegion io_mmio_window;
+
+ qemu_irq irq[BCM2838_PCIE_NUM_IRQS];
+ int irq_num[BCM2838_PCIE_NUM_IRQS];
+};
+
+int bcm2838_pcie_host_set_irq_num(BCM2838PcieHostState *s, int index, int spi);
+
#endif /* BCM2838_PCIE_H */
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> --- hw/arm/bcm2838_pcie.c | 217 +++++++++++++++++++++++++++++++++- hw/arm/trace-events | 4 + include/hw/arm/bcm2838_pcie.h | 22 ++++ 3 files changed, 241 insertions(+), 2 deletions(-)