diff mbox series

[v4,2/3] hw/cxl/cxl-mailbox-utils: Add device patrol scrub control feature

Message ID 20240219150025.1531-3-shiju.jose@huawei.com (mailing list archive)
State New, archived
Headers show
Series hw/cxl/cxl-mailbox-utils: Add feature commands, device patrol scrub control and DDR5 ECS control features | expand

Commit Message

Zhijian Li (Fujitsu)" via Feb. 19, 2024, 3 p.m. UTC
From: Shiju Jose <shiju.jose@huawei.com>

CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub control
feature. The device patrol scrub proactively locates and makes corrections
to errors in regular cycle. The patrol scrub control allows the request to
configure patrol scrub input configurations.

The patrol scrub control allows the requester to specify the number of
hours for which the patrol scrub cycles must be completed, provided that
the requested number is not less than the minimum number of hours for the
patrol scrub cycle that the device is capable of. In addition, the patrol
scrub controls allow the host to disable and enable the feature in case
disabling of the feature is needed for other purposes such as
performance-aware operations which require the background operations to be
turned off.

Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
 hw/cxl/cxl-mailbox-utils.c | 97 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 96 insertions(+), 1 deletion(-)

Comments

Jonathan Cameron Feb. 19, 2024, 4:49 p.m. UTC | #1
On Mon, 19 Feb 2024 23:00:24 +0800
<shiju.jose@huawei.com> wrote:

> From: Shiju Jose <shiju.jose@huawei.com>
> 
> CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub control
> feature. The device patrol scrub proactively locates and makes corrections
> to errors in regular cycle. The patrol scrub control allows the request to
> configure patrol scrub input configurations.
> 
> The patrol scrub control allows the requester to specify the number of
> hours for which the patrol scrub cycles must be completed, provided that
> the requested number is not less than the minimum number of hours for the
> patrol scrub cycle that the device is capable of. In addition, the patrol
> scrub controls allow the host to disable and enable the feature in case
> disabling of the feature is needed for other purposes such as
> performance-aware operations which require the background operations to be
> turned off.
> 
> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
> Reviewed-by: Fan Ni <fan.ni@samsung.com>
> Signed-off-by: Shiju Jose <shiju.jose@huawei.com>

The data can't be global as we need to have separate controls per CXL type3
device so that each instance can have different settings. 

Otherwise a few minor comments inline.

Jonathan

> ---
>  hw/cxl/cxl-mailbox-utils.c | 97 +++++++++++++++++++++++++++++++++++++-
>  1 file changed, 96 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> index 779ce80e3c..908ce16642 100644
> --- a/hw/cxl/cxl-mailbox-utils.c
> +++ b/hw/cxl/cxl-mailbox-utils.c
> @@ -997,6 +997,7 @@ typedef struct CXLSupportedFeatureEntry {
>  } QEMU_PACKED CXLSupportedFeatureEntry;
>  
>  enum CXL_SUPPORTED_FEATURES_LIST {
> +    CXL_FEATURE_PATROL_SCRUB = 0,
>      CXL_FEATURE_MAX
>  };
>  
> @@ -1037,6 +1038,38 @@ enum CXL_SET_FEATURE_FLAG_DATA_TRANSFER {
>      CXL_SET_FEATURE_FLAG_DATA_TRANSFER_MAX
>  };
>  
> +/* CXL r3.1 section 8.2.9.9.11.1: Device Patrol Scrub Control Feature */
> +static const QemuUUID patrol_scrub_uuid = {
> +    .data = UUID(0x96dad7d6, 0xfde8, 0x482b, 0xa7, 0x33,
> +                 0x75, 0x77, 0x4e, 0x06, 0xdb, 0x8a)
> +};
> +
> +#define CXL_MEMDEV_PS_GET_FEATURE_VERSION    0x01
> +#define CXL_MEMDEV_PS_SET_FEATURE_VERSION    0x01
> +#define CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_DEFAULT    BIT(0)
> +#define CXL_MEMDEV_PS_SCRUB_REALTIME_REPORT_CAP_DEFAULT    BIT(1)
> +#define CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_DEFAULT    12
> +#define CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_DEFAULT    1
> +#define CXL_MEMDEV_PS_ENABLE_DEFAULT    0
> +
> +/* CXL memdev patrol scrub control attributes */
> +typedef struct CXLMemPatrolScrubReadAttrs {
> +        uint8_t scrub_cycle_cap;
> +        uint16_t scrub_cycle;
> +        uint8_t scrub_flags;
> +} QEMU_PACKED CXLMemPatrolScrubReadAttrs;
> +
> +typedef struct CXLMemPatrolScrubWriteAttrs {
> +    uint8_t scrub_cycle_hr;
> +    uint8_t scrub_flags;
> +} QEMU_PACKED CXLMemPatrolScrubWriteAttrs;
> +
> +typedef struct CXLMemPatrolScrubSetFeature {
> +        CXLSetFeatureInHeader hdr;
> +        CXLMemPatrolScrubWriteAttrs feat_data;
> +} QEMU_PACKED QEMU_ALIGNED(16) CXLMemPatrolScrubSetFeature;
> +static CXLMemPatrolScrubReadAttrs cxl_memdev_ps_feat_attrs;
> +
>  /* CXL r3.1 section 8.2.9.6.1: Get Supported Features (Opcode 0500h) */
>  static CXLRetCode cmd_features_get_supported(const struct cxl_cmd *cmd,
>                                               uint8_t *payload_in,
> @@ -1060,7 +1093,7 @@ static CXLRetCode cmd_features_get_supported(const struct cxl_cmd *cmd,
>      uint16_t feat_entries = 0;
>  
>      if (get_feats_in->count < sizeof(CXLSupportedFeatureHeader) ||
> -        get_feats_in->start_index > CXL_FEATURE_MAX) {
> +        get_feats_in->start_index >= CXL_FEATURE_MAX) {

Change looks valid, but should have been in patch 1.


>          return CXL_MBOX_INVALID_INPUT;
>      }
>      req_entries = (get_feats_in->count -
> @@ -1072,6 +1105,31 @@ static CXLRetCode cmd_features_get_supported(const struct cxl_cmd *cmd,
>      entry = 0;
>      while (entry < req_entries) {
>          switch (index) {
> +        case  CXL_FEATURE_PATROL_SCRUB:
> +            /* Fill supported feature entry for device patrol scrub control */
> +            get_feats_out->feat_entries[entry] =
> +                           (struct CXLSupportedFeatureEntry) {
> +                .uuid = patrol_scrub_uuid,
> +                .feat_index = index,
> +                .get_feat_size = sizeof(CXLMemPatrolScrubReadAttrs),
> +                .set_feat_size = sizeof(CXLMemPatrolScrubWriteAttrs),
> +                /* Bit[0] : 1, feature attributes changeable */
> +                .attr_flags = 0x1,
> +                .get_feat_version = CXL_MEMDEV_PS_GET_FEATURE_VERSION,
> +                .set_feat_version = CXL_MEMDEV_PS_SET_FEATURE_VERSION,
> +                .set_feat_effects = 0,
> +            };
> +            feat_entries++;
> +            /* Set default value for device patrol scrub read attributes */
> +            cxl_memdev_ps_feat_attrs.scrub_cycle_cap =
> +                                CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_DEFAULT |
> +                                CXL_MEMDEV_PS_SCRUB_REALTIME_REPORT_CAP_DEFAULT;
> +            cxl_memdev_ps_feat_attrs.scrub_cycle =
> +                                CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_DEFAULT |
> +                                (CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_DEFAULT << 8);
> +            cxl_memdev_ps_feat_attrs.scrub_flags =
> +                                CXL_MEMDEV_PS_ENABLE_DEFAULT;

This is general defaults setup - doesn't belong here.
Not strictly necessary for a driver to have called the query for supported
features before trying to use them.

Move this to mem/cxl_type3.c as part of the device emulation.

 
> +            break;
>          default:
>              break;
>          }
> @@ -1112,6 +1170,20 @@ static CXLRetCode cmd_features_get_feature(const struct cxl_cmd *cmd,
>          return CXL_MBOX_INVALID_INPUT;
>      }
>  
> +    if (qemu_uuid_is_equal(&get_feature->uuid, &patrol_scrub_uuid)) {
> +        if (get_feature->offset >= sizeof(CXLMemPatrolScrubReadAttrs)) {
> +            return CXL_MBOX_INVALID_INPUT;
> +        }
> +        bytes_to_copy = sizeof(CXLMemPatrolScrubReadAttrs) -
> +                                             get_feature->offset;
> +        bytes_to_copy = MIN(bytes_to_copy, get_feature->count);
> +        memcpy(payload_out,
> +               &cxl_memdev_ps_feat_attrs + get_feature->offset,
> +               bytes_to_copy);
> +    } else {
> +        return CXL_MBOX_UNSUPPORTED;
> +    }
> +
>      *len_out = bytes_to_copy;
>  
>      return CXL_MBOX_SUCCESS;
> @@ -1125,6 +1197,29 @@ static CXLRetCode cmd_features_set_feature(const struct cxl_cmd *cmd,
>                                             size_t *len_out,
>                                             CXLCCI *cci)
>  {
> +    CXLMemPatrolScrubWriteAttrs *ps_write_attrs;
> +    CXLMemPatrolScrubSetFeature *ps_set_feature;
> +    CXLSetFeatureInHeader *hdr = (void *)payload_in;
> +
> +    if (qemu_uuid_is_equal(&hdr->uuid, &patrol_scrub_uuid)) {
> +        if (hdr->version != CXL_MEMDEV_PS_SET_FEATURE_VERSION ||
> +            (hdr->flags & CXL_SET_FEATURE_FLAG_DATA_TRANSFER_MASK) !=
> +                               CXL_SET_FEATURE_FLAG_FULL_DATA_TRANSFER) {
> +            return CXL_MBOX_UNSUPPORTED;
> +        }
> +
> +        ps_set_feature = (void *)payload_in;
> +        ps_write_attrs = &ps_set_feature->feat_data;
> +        cxl_memdev_ps_feat_attrs.scrub_cycle &= ~0xFF;

This needed to be embedded in the Type 3 device structures - not globally shared.
You'll need to check the device type, then convert cci->d to it.

if (object_dynamic_cast(OBJECT(cci->d), TYPE_CXL_TYPE3)) {
        CXLType3Dev *ct3d = CXL_TYPE3(cci->d);

Add the feature attrs to that structure (as for now it's type 3 specific and
we don't have a generalized place for memory features beyond that).



> +        cxl_memdev_ps_feat_attrs.scrub_cycle |=
> +                          ps_write_attrs->scrub_cycle_hr & 0xFF;
> +        cxl_memdev_ps_feat_attrs.scrub_flags &= ~0x1;
> +        cxl_memdev_ps_feat_attrs.scrub_flags |=
> +                          ps_write_attrs->scrub_flags & 0x1;
> +    } else {
> +        return CXL_MBOX_UNSUPPORTED;
> +    }
> +
>      return CXL_MBOX_SUCCESS;
>  }
>
diff mbox series

Patch

diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 779ce80e3c..908ce16642 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -997,6 +997,7 @@  typedef struct CXLSupportedFeatureEntry {
 } QEMU_PACKED CXLSupportedFeatureEntry;
 
 enum CXL_SUPPORTED_FEATURES_LIST {
+    CXL_FEATURE_PATROL_SCRUB = 0,
     CXL_FEATURE_MAX
 };
 
@@ -1037,6 +1038,38 @@  enum CXL_SET_FEATURE_FLAG_DATA_TRANSFER {
     CXL_SET_FEATURE_FLAG_DATA_TRANSFER_MAX
 };
 
+/* CXL r3.1 section 8.2.9.9.11.1: Device Patrol Scrub Control Feature */
+static const QemuUUID patrol_scrub_uuid = {
+    .data = UUID(0x96dad7d6, 0xfde8, 0x482b, 0xa7, 0x33,
+                 0x75, 0x77, 0x4e, 0x06, 0xdb, 0x8a)
+};
+
+#define CXL_MEMDEV_PS_GET_FEATURE_VERSION    0x01
+#define CXL_MEMDEV_PS_SET_FEATURE_VERSION    0x01
+#define CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_DEFAULT    BIT(0)
+#define CXL_MEMDEV_PS_SCRUB_REALTIME_REPORT_CAP_DEFAULT    BIT(1)
+#define CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_DEFAULT    12
+#define CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_DEFAULT    1
+#define CXL_MEMDEV_PS_ENABLE_DEFAULT    0
+
+/* CXL memdev patrol scrub control attributes */
+typedef struct CXLMemPatrolScrubReadAttrs {
+        uint8_t scrub_cycle_cap;
+        uint16_t scrub_cycle;
+        uint8_t scrub_flags;
+} QEMU_PACKED CXLMemPatrolScrubReadAttrs;
+
+typedef struct CXLMemPatrolScrubWriteAttrs {
+    uint8_t scrub_cycle_hr;
+    uint8_t scrub_flags;
+} QEMU_PACKED CXLMemPatrolScrubWriteAttrs;
+
+typedef struct CXLMemPatrolScrubSetFeature {
+        CXLSetFeatureInHeader hdr;
+        CXLMemPatrolScrubWriteAttrs feat_data;
+} QEMU_PACKED QEMU_ALIGNED(16) CXLMemPatrolScrubSetFeature;
+static CXLMemPatrolScrubReadAttrs cxl_memdev_ps_feat_attrs;
+
 /* CXL r3.1 section 8.2.9.6.1: Get Supported Features (Opcode 0500h) */
 static CXLRetCode cmd_features_get_supported(const struct cxl_cmd *cmd,
                                              uint8_t *payload_in,
@@ -1060,7 +1093,7 @@  static CXLRetCode cmd_features_get_supported(const struct cxl_cmd *cmd,
     uint16_t feat_entries = 0;
 
     if (get_feats_in->count < sizeof(CXLSupportedFeatureHeader) ||
-        get_feats_in->start_index > CXL_FEATURE_MAX) {
+        get_feats_in->start_index >= CXL_FEATURE_MAX) {
         return CXL_MBOX_INVALID_INPUT;
     }
     req_entries = (get_feats_in->count -
@@ -1072,6 +1105,31 @@  static CXLRetCode cmd_features_get_supported(const struct cxl_cmd *cmd,
     entry = 0;
     while (entry < req_entries) {
         switch (index) {
+        case  CXL_FEATURE_PATROL_SCRUB:
+            /* Fill supported feature entry for device patrol scrub control */
+            get_feats_out->feat_entries[entry] =
+                           (struct CXLSupportedFeatureEntry) {
+                .uuid = patrol_scrub_uuid,
+                .feat_index = index,
+                .get_feat_size = sizeof(CXLMemPatrolScrubReadAttrs),
+                .set_feat_size = sizeof(CXLMemPatrolScrubWriteAttrs),
+                /* Bit[0] : 1, feature attributes changeable */
+                .attr_flags = 0x1,
+                .get_feat_version = CXL_MEMDEV_PS_GET_FEATURE_VERSION,
+                .set_feat_version = CXL_MEMDEV_PS_SET_FEATURE_VERSION,
+                .set_feat_effects = 0,
+            };
+            feat_entries++;
+            /* Set default value for device patrol scrub read attributes */
+            cxl_memdev_ps_feat_attrs.scrub_cycle_cap =
+                                CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_DEFAULT |
+                                CXL_MEMDEV_PS_SCRUB_REALTIME_REPORT_CAP_DEFAULT;
+            cxl_memdev_ps_feat_attrs.scrub_cycle =
+                                CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_DEFAULT |
+                                (CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_DEFAULT << 8);
+            cxl_memdev_ps_feat_attrs.scrub_flags =
+                                CXL_MEMDEV_PS_ENABLE_DEFAULT;
+            break;
         default:
             break;
         }
@@ -1112,6 +1170,20 @@  static CXLRetCode cmd_features_get_feature(const struct cxl_cmd *cmd,
         return CXL_MBOX_INVALID_INPUT;
     }
 
+    if (qemu_uuid_is_equal(&get_feature->uuid, &patrol_scrub_uuid)) {
+        if (get_feature->offset >= sizeof(CXLMemPatrolScrubReadAttrs)) {
+            return CXL_MBOX_INVALID_INPUT;
+        }
+        bytes_to_copy = sizeof(CXLMemPatrolScrubReadAttrs) -
+                                             get_feature->offset;
+        bytes_to_copy = MIN(bytes_to_copy, get_feature->count);
+        memcpy(payload_out,
+               &cxl_memdev_ps_feat_attrs + get_feature->offset,
+               bytes_to_copy);
+    } else {
+        return CXL_MBOX_UNSUPPORTED;
+    }
+
     *len_out = bytes_to_copy;
 
     return CXL_MBOX_SUCCESS;
@@ -1125,6 +1197,29 @@  static CXLRetCode cmd_features_set_feature(const struct cxl_cmd *cmd,
                                            size_t *len_out,
                                            CXLCCI *cci)
 {
+    CXLMemPatrolScrubWriteAttrs *ps_write_attrs;
+    CXLMemPatrolScrubSetFeature *ps_set_feature;
+    CXLSetFeatureInHeader *hdr = (void *)payload_in;
+
+    if (qemu_uuid_is_equal(&hdr->uuid, &patrol_scrub_uuid)) {
+        if (hdr->version != CXL_MEMDEV_PS_SET_FEATURE_VERSION ||
+            (hdr->flags & CXL_SET_FEATURE_FLAG_DATA_TRANSFER_MASK) !=
+                               CXL_SET_FEATURE_FLAG_FULL_DATA_TRANSFER) {
+            return CXL_MBOX_UNSUPPORTED;
+        }
+
+        ps_set_feature = (void *)payload_in;
+        ps_write_attrs = &ps_set_feature->feat_data;
+        cxl_memdev_ps_feat_attrs.scrub_cycle &= ~0xFF;
+        cxl_memdev_ps_feat_attrs.scrub_cycle |=
+                          ps_write_attrs->scrub_cycle_hr & 0xFF;
+        cxl_memdev_ps_feat_attrs.scrub_flags &= ~0x1;
+        cxl_memdev_ps_feat_attrs.scrub_flags |=
+                          ps_write_attrs->scrub_flags & 0x1;
+    } else {
+        return CXL_MBOX_UNSUPPORTED;
+    }
+
     return CXL_MBOX_SUCCESS;
 }