| Message ID | 20240221182020.1086096-8-nifan.cxl@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Enabling DCD emulation support in Qemu | expand |
On 2024-02-22 오전 3:16, nifan.cxl@gmail.com wrote: > From: Fan Ni <fan.ni@samsung.com> > > Add dynamic capacity extent list representative to the definition of > CXLType3Dev and add get DC extent list mailbox command per > CXL.spec.3.1:.8.2.9.9.9.2. > > Signed-off-by: Fan Ni <fan.ni@samsung.com> > --- > hw/cxl/cxl-mailbox-utils.c | 71 +++++++++++++++++++++++++++++++++++++ > hw/mem/cxl_type3.c | 1 + > include/hw/cxl/cxl_device.h | 23 ++++++++++++ > 3 files changed, 95 insertions(+) > > diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c > index f95e417683..dae7fe00ed 100644 > --- a/hw/cxl/cxl-mailbox-utils.c > +++ b/hw/cxl/cxl-mailbox-utils.c > @@ -83,6 +83,7 @@ enum { > #define CLEAR_POISON 0x2 > DCD_CONFIG = 0x48, > #define GET_DC_CONFIG 0x0 > + #define GET_DYN_CAP_EXT_LIST 0x1 > PHYSICAL_SWITCH = 0x51, > #define IDENTIFY_SWITCH_DEVICE 0x0 > #define GET_PHYSICAL_PORT_STATE 0x1 > @@ -1344,6 +1345,73 @@ static CXLRetCode cmd_dcd_get_dyn_cap_config(const struct cxl_cmd *cmd, > return CXL_MBOX_SUCCESS; > } > > +/* > + * CXL r3.1 section 8.2.9.9.9.2: > + * Get Dynamic Capacity Extent List (Opcode 4801h) > + */ > +static CXLRetCode cmd_dcd_get_dyn_cap_ext_list(const struct cxl_cmd *cmd, > + uint8_t *payload_in, > + size_t len_in, > + uint8_t *payload_out, > + size_t *len_out, > + CXLCCI *cci) > +{ > + CXLType3Dev *ct3d = CXL_TYPE3(cci->d); > + struct get_dyn_cap_ext_list_in_pl { > + uint32_t extent_cnt; > + uint32_t start_extent_id; > + } QEMU_PACKED; > + > + struct get_dyn_cap_ext_list_out_pl { > + uint32_t count; > + uint32_t total_extents; > + uint32_t generation_num; > + uint8_t rsvd[4]; > + CXLDCExtentRaw records[]; > + } QEMU_PACKED; > + > + struct get_dyn_cap_ext_list_in_pl *in = (void *)payload_in; > + struct get_dyn_cap_ext_list_out_pl *out = (void *)payload_out; > + uint16_t record_count = 0, i = 0, record_done = 0; > + CXLDCExtentList *extent_list = &ct3d->dc.extents; > + CXLDCExtent *ent; > + uint16_t out_pl_len; > + uint32_t start_extent_id = in->start_extent_id; > + > + if (start_extent_id > ct3d->dc.total_extent_count) { Hello, Shouldn't it be >= rather than >? (I accidentally replied to v3 with the same comment above, so please ignore that.) Thanks, Wonjae
On Fri, Feb 23, 2024 at 04:16:53PM +0900, Wonjae Lee wrote: > On 2024-02-22 오전 3:16, nifan.cxl@gmail.com wrote: > > From: Fan Ni <fan.ni@samsung.com> > > > > Add dynamic capacity extent list representative to the definition of > > CXLType3Dev and add get DC extent list mailbox command per > > CXL.spec.3.1:.8.2.9.9.9.2. > > > > Signed-off-by: Fan Ni <fan.ni@samsung.com> > > --- > > hw/cxl/cxl-mailbox-utils.c | 71 +++++++++++++++++++++++++++++++++++++ > > hw/mem/cxl_type3.c | 1 + > > include/hw/cxl/cxl_device.h | 23 ++++++++++++ > > 3 files changed, 95 insertions(+) > > > > diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c > > index f95e417683..dae7fe00ed 100644 > > --- a/hw/cxl/cxl-mailbox-utils.c > > +++ b/hw/cxl/cxl-mailbox-utils.c > > @@ -83,6 +83,7 @@ enum { > > #define CLEAR_POISON 0x2 > > DCD_CONFIG = 0x48, > > #define GET_DC_CONFIG 0x0 > > + #define GET_DYN_CAP_EXT_LIST 0x1 > > PHYSICAL_SWITCH = 0x51, > > #define IDENTIFY_SWITCH_DEVICE 0x0 > > #define GET_PHYSICAL_PORT_STATE 0x1 > > @@ -1344,6 +1345,73 @@ static CXLRetCode cmd_dcd_get_dyn_cap_config(const struct cxl_cmd *cmd, > > return CXL_MBOX_SUCCESS; > > } > > +/* > > + * CXL r3.1 section 8.2.9.9.9.2: > > + * Get Dynamic Capacity Extent List (Opcode 4801h) > > + */ > > +static CXLRetCode cmd_dcd_get_dyn_cap_ext_list(const struct cxl_cmd *cmd, > > + uint8_t *payload_in, > > + size_t len_in, > > + uint8_t *payload_out, > > + size_t *len_out, > > + CXLCCI *cci) > > +{ > > + CXLType3Dev *ct3d = CXL_TYPE3(cci->d); > > + struct get_dyn_cap_ext_list_in_pl { > > + uint32_t extent_cnt; > > + uint32_t start_extent_id; > > + } QEMU_PACKED; > > + > > + struct get_dyn_cap_ext_list_out_pl { > > + uint32_t count; > > + uint32_t total_extents; > > + uint32_t generation_num; > > + uint8_t rsvd[4]; > > + CXLDCExtentRaw records[]; > > + } QEMU_PACKED; > > + > > + struct get_dyn_cap_ext_list_in_pl *in = (void *)payload_in; > > + struct get_dyn_cap_ext_list_out_pl *out = (void *)payload_out; > > + uint16_t record_count = 0, i = 0, record_done = 0; > > + CXLDCExtentList *extent_list = &ct3d->dc.extents; > > + CXLDCExtent *ent; > > + uint16_t out_pl_len; > > + uint32_t start_extent_id = in->start_extent_id; > > + > > + if (start_extent_id > ct3d->dc.total_extent_count) { > > Hello, > > Shouldn't it be >= rather than >? > > (I accidentally replied to v3 with the same comment above, so please ignore > that.) The spec says "Greater than", so I will keep it as it is until there is more clarification about this. When start_extent_id == total_extent_count, return 0 extents. Fan > > Thanks, > Wonjae >
On Wed, 21 Feb 2024 10:16:00 -0800 nifan.cxl@gmail.com wrote: > From: Fan Ni <fan.ni@samsung.com> > > Add dynamic capacity extent list representative to the definition of > CXLType3Dev and add get DC extent list mailbox command per > CXL.spec.3.1:.8.2.9.9.9.2. > > Signed-off-by: Fan Ni <fan.ni@samsung.com> Follow on from earlier comment on my preference for anonymous structure types when we only use them in one place. > +/* > + * CXL r3.1 section 8.2.9.9.9.2: > + * Get Dynamic Capacity Extent List (Opcode 4801h) > + */ > +static CXLRetCode cmd_dcd_get_dyn_cap_ext_list(const struct cxl_cmd *cmd, > + uint8_t *payload_in, > + size_t len_in, > + uint8_t *payload_out, > + size_t *len_out, > + CXLCCI *cci) > +{ > + CXLType3Dev *ct3d = CXL_TYPE3(cci->d); > + struct get_dyn_cap_ext_list_in_pl { > + uint32_t extent_cnt; > + uint32_t start_extent_id; > + } QEMU_PACKED; > + > + struct get_dyn_cap_ext_list_out_pl { > + uint32_t count; > + uint32_t total_extents; > + uint32_t generation_num; > + uint8_t rsvd[4]; > + CXLDCExtentRaw records[]; > + } QEMU_PACKED; > + > + struct get_dyn_cap_ext_list_in_pl *in = (void *)payload_in; > + struct get_dyn_cap_ext_list_out_pl *out = (void *)payload_out; As for earlier patches, I think anonymous struct types are fine for these and lead to shorter code. > + uint16_t record_count = 0, i = 0, record_done = 0; > + CXLDCExtentList *extent_list = &ct3d->dc.extents; > + CXLDCExtent *ent; > + uint16_t out_pl_len; > + uint32_t start_extent_id = in->start_extent_id; > + > + if (start_extent_id > ct3d->dc.total_extent_count) { > + return CXL_MBOX_INVALID_INPUT; > + } > + > + record_count = MIN(in->extent_cnt, > + ct3d->dc.total_extent_count - start_extent_id); > + > + out_pl_len = sizeof(*out) + record_count * sizeof(out->records[0]); > + assert(out_pl_len <= CXL_MAILBOX_MAX_PAYLOAD_SIZE); > + > + stl_le_p(&out->count, record_count); > + stl_le_p(&out->total_extents, ct3d->dc.total_extent_count); > + stl_le_p(&out->generation_num, ct3d->dc.ext_list_gen_seq); > + > + if (record_count > 0) { > + QTAILQ_FOREACH(ent, extent_list, node) { > + if (i++ < start_extent_id) { > + continue; > + } > + stq_le_p(&out->records[record_done].start_dpa, ent->start_dpa); > + stq_le_p(&out->records[record_done].len, ent->len); > + memcpy(&out->records[record_done].tag, ent->tag, 0x10); > + stw_le_p(&out->records[record_done].shared_seq, ent->shared_seq); > + record_done++; > + if (record_done == record_count) { > + break; > + } > + } > + } > + > + *len_out = out_pl_len; > + return CXL_MBOX_SUCCESS; > +} > +
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c index f95e417683..dae7fe00ed 100644 --- a/hw/cxl/cxl-mailbox-utils.c +++ b/hw/cxl/cxl-mailbox-utils.c @@ -83,6 +83,7 @@ enum { #define CLEAR_POISON 0x2 DCD_CONFIG = 0x48, #define GET_DC_CONFIG 0x0 + #define GET_DYN_CAP_EXT_LIST 0x1 PHYSICAL_SWITCH = 0x51, #define IDENTIFY_SWITCH_DEVICE 0x0 #define GET_PHYSICAL_PORT_STATE 0x1 @@ -1344,6 +1345,73 @@ static CXLRetCode cmd_dcd_get_dyn_cap_config(const struct cxl_cmd *cmd, return CXL_MBOX_SUCCESS; } +/* + * CXL r3.1 section 8.2.9.9.9.2: + * Get Dynamic Capacity Extent List (Opcode 4801h) + */ +static CXLRetCode cmd_dcd_get_dyn_cap_ext_list(const struct cxl_cmd *cmd, + uint8_t *payload_in, + size_t len_in, + uint8_t *payload_out, + size_t *len_out, + CXLCCI *cci) +{ + CXLType3Dev *ct3d = CXL_TYPE3(cci->d); + struct get_dyn_cap_ext_list_in_pl { + uint32_t extent_cnt; + uint32_t start_extent_id; + } QEMU_PACKED; + + struct get_dyn_cap_ext_list_out_pl { + uint32_t count; + uint32_t total_extents; + uint32_t generation_num; + uint8_t rsvd[4]; + CXLDCExtentRaw records[]; + } QEMU_PACKED; + + struct get_dyn_cap_ext_list_in_pl *in = (void *)payload_in; + struct get_dyn_cap_ext_list_out_pl *out = (void *)payload_out; + uint16_t record_count = 0, i = 0, record_done = 0; + CXLDCExtentList *extent_list = &ct3d->dc.extents; + CXLDCExtent *ent; + uint16_t out_pl_len; + uint32_t start_extent_id = in->start_extent_id; + + if (start_extent_id > ct3d->dc.total_extent_count) { + return CXL_MBOX_INVALID_INPUT; + } + + record_count = MIN(in->extent_cnt, + ct3d->dc.total_extent_count - start_extent_id); + + out_pl_len = sizeof(*out) + record_count * sizeof(out->records[0]); + assert(out_pl_len <= CXL_MAILBOX_MAX_PAYLOAD_SIZE); + + stl_le_p(&out->count, record_count); + stl_le_p(&out->total_extents, ct3d->dc.total_extent_count); + stl_le_p(&out->generation_num, ct3d->dc.ext_list_gen_seq); + + if (record_count > 0) { + QTAILQ_FOREACH(ent, extent_list, node) { + if (i++ < start_extent_id) { + continue; + } + stq_le_p(&out->records[record_done].start_dpa, ent->start_dpa); + stq_le_p(&out->records[record_done].len, ent->len); + memcpy(&out->records[record_done].tag, ent->tag, 0x10); + stw_le_p(&out->records[record_done].shared_seq, ent->shared_seq); + record_done++; + if (record_done == record_count) { + break; + } + } + } + + *len_out = out_pl_len; + return CXL_MBOX_SUCCESS; +} + #define IMMEDIATE_CONFIG_CHANGE (1 << 1) #define IMMEDIATE_DATA_CHANGE (1 << 2) #define IMMEDIATE_POLICY_CHANGE (1 << 3) @@ -1391,6 +1459,9 @@ static const struct cxl_cmd cxl_cmd_set[256][256] = { static const struct cxl_cmd cxl_cmd_set_dcd[256][256] = { [DCD_CONFIG][GET_DC_CONFIG] = { "DCD_GET_DC_CONFIG", cmd_dcd_get_dyn_cap_config, 2, 0 }, + [DCD_CONFIG][GET_DYN_CAP_EXT_LIST] = { + "DCD_GET_DYNAMIC_CAPACITY_EXTENT_LIST", cmd_dcd_get_dyn_cap_ext_list, + 8, 0 }, }; static const struct cxl_cmd cxl_cmd_set_sw[256][256] = { diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c index b966fa4f10..f4edada303 100644 --- a/hw/mem/cxl_type3.c +++ b/hw/mem/cxl_type3.c @@ -661,6 +661,7 @@ static bool cxl_create_dc_regions(CXLType3Dev *ct3d, Error **errp) region_base += region->len; ct3d->dc.total_capacity += region->len; } + QTAILQ_INIT(&ct3d->dc.extents); return true; } diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h index 2f244da9a1..12a6fb47a9 100644 --- a/include/hw/cxl/cxl_device.h +++ b/include/hw/cxl/cxl_device.h @@ -424,6 +424,25 @@ typedef QLIST_HEAD(, CXLPoison) CXLPoisonList; #define DCD_MAX_REGION_NUM 8 +typedef struct CXLDCExtentRaw { + uint64_t start_dpa; + uint64_t len; + uint8_t tag[0x10]; + uint16_t shared_seq; + uint8_t rsvd[0x6]; +} QEMU_PACKED CXLDCExtentRaw; + +typedef struct CXLDCExtent { + uint64_t start_dpa; + uint64_t len; + uint8_t tag[0x10]; + uint16_t shared_seq; + uint8_t rsvd[0x6]; + + QTAILQ_ENTRY(CXLDCExtent) node; +} CXLDCExtent; +typedef QTAILQ_HEAD(, CXLDCExtent) CXLDCExtentList; + typedef struct CXLDCDRegion { uint64_t base; uint64_t decode_len; /* aligned to 256*MiB */ @@ -470,6 +489,10 @@ struct CXLType3Dev { HostMemoryBackend *host_dc; AddressSpace host_dc_as; uint64_t total_capacity; /* 256M aligned */ + CXLDCExtentList extents; + + uint32_t total_extent_count; + uint32_t ext_list_gen_seq; uint8_t num_regions; /* 0-8 regions */ CXLDCDRegion regions[DCD_MAX_REGION_NUM];