| Message ID | 20240229113842.619738-2-gaosong@loongson.cn (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [PULL,v2,1/1] loongarch: Change the UEFI loading mode to loongarch | expand |
On 29/2/24 12:38, Song Gao wrote: > From: Xianglai Li <lixianglai@loongson.cn> > > The UEFI loading mode in loongarch is very different > from that in other architectures:loongarch's UEFI code > is in rom, while other architectures' UEFI code is in flash. > > loongarch UEFI can be loaded as follows: > -machine virt,pflash=pflash0-format > -bios ./QEMU_EFI.fd > > Other architectures load UEFI using the following methods: > -machine virt,pflash0=pflash0-format,pflash1=pflash1-format > > loongarch's UEFI loading method makes qemu and libvirt incompatible > when using NVRAM, and the cost of loongarch's current loading method > far outweighs the benefits, so we decided to use the same UEFI loading > scheme as other architectures. FYI I'm still trying to find a way to avoid that, planning to discuss more with libvirt folks. Well, maybe it is a waste of my time and I should just stop worrying / caring about this long standing issue. > Cc: Andrea Bolognani <abologna@redhat.com> > Cc: maobibo@loongson.cn > Cc: Philippe Mathieu-Daudé <philmd@linaro.org> > Cc: Song Gao <gaosong@loongson.cn> > Cc: zhaotianrui@loongson.cn > Signed-off-by: Xianglai Li <lixianglai@loongson.cn> > Tested-by: Andrea Bolognani <abologna@redhat.com> > Reviewed-by: Song Gao <gaosong@loongson.cn> > Message-Id: <0bd892aa9b88e0f4cc904cb70efd0251fc1cde29.1708336919.git.lixianglai@loongson.cn> > Signed-off-by: Song Gao <gaosong@loongson.cn> > --- > hw/loongarch/acpi-build.c | 29 +++++++++-- > hw/loongarch/virt.c | 101 ++++++++++++++++++++++++++---------- > include/hw/loongarch/virt.h | 10 ++-- > 3 files changed, 107 insertions(+), 33 deletions(-)
Hi Philippe: > On 29/2/24 12:38, Song Gao wrote: >> From: Xianglai Li <lixianglai@loongson.cn> >> >> The UEFI loading mode in loongarch is very different >> from that in other architectures:loongarch's UEFI code >> is in rom, while other architectures' UEFI code is in flash. >> >> loongarch UEFI can be loaded as follows: >> -machine virt,pflash=pflash0-format >> -bios ./QEMU_EFI.fd >> >> Other architectures load UEFI using the following methods: >> -machine virt,pflash0=pflash0-format,pflash1=pflash1-format >> >> loongarch's UEFI loading method makes qemu and libvirt incompatible >> when using NVRAM, and the cost of loongarch's current loading method >> far outweighs the benefits, so we decided to use the same UEFI loading >> scheme as other architectures. > > FYI I'm still trying to find a way to avoid that, planning to discuss > more with libvirt folks. Well, maybe it is a waste of my time and I > should just stop worrying / caring about this long standing issue. > Thank you so much for your attention to this issue and your long-standing contributions to the community!!:-) Best regards, Xianglai. >> Cc: Andrea Bolognani <abologna@redhat.com> >> Cc: maobibo@loongson.cn >> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> >> Cc: Song Gao <gaosong@loongson.cn> >> Cc: zhaotianrui@loongson.cn >> Signed-off-by: Xianglai Li <lixianglai@loongson.cn> >> Tested-by: Andrea Bolognani <abologna@redhat.com> >> Reviewed-by: Song Gao <gaosong@loongson.cn> >> Message-Id: >> <0bd892aa9b88e0f4cc904cb70efd0251fc1cde29.1708336919.git.lixianglai@loongson.cn> >> Signed-off-by: Song Gao <gaosong@loongson.cn> >> --- >> hw/loongarch/acpi-build.c | 29 +++++++++-- >> hw/loongarch/virt.c | 101 ++++++++++++++++++++++++++---------- >> include/hw/loongarch/virt.h | 10 ++-- >> 3 files changed, 107 insertions(+), 33 deletions(-) >
Hi, Xianglai, How to pass the BIOS file to qemu after this patch? With the old cmdline I get an RCU stall and freeze the kvm host. Huacai On Sat, Mar 2, 2024 at 12:14 PM lixianglai <lixianglai@loongson.cn> wrote: > > Hi Philippe: > > On 29/2/24 12:38, Song Gao wrote: > > From: Xianglai Li <lixianglai@loongson.cn> > > The UEFI loading mode in loongarch is very different > from that in other architectures:loongarch's UEFI code > is in rom, while other architectures' UEFI code is in flash. > > loongarch UEFI can be loaded as follows: > -machine virt,pflash=pflash0-format > -bios ./QEMU_EFI.fd > > Other architectures load UEFI using the following methods: > -machine virt,pflash0=pflash0-format,pflash1=pflash1-format > > loongarch's UEFI loading method makes qemu and libvirt incompatible > when using NVRAM, and the cost of loongarch's current loading method > far outweighs the benefits, so we decided to use the same UEFI loading > scheme as other architectures. > > > FYI I'm still trying to find a way to avoid that, planning to discuss > more with libvirt folks. Well, maybe it is a waste of my time and I > should just stop worrying / caring about this long standing issue. > > Thank you so much for your attention to this issue > > and your long-standing contributions to the community!!:-) > > Best regards, > > Xianglai. > > > Cc: Andrea Bolognani <abologna@redhat.com> > Cc: maobibo@loongson.cn > Cc: Philippe Mathieu-Daudé <philmd@linaro.org> > Cc: Song Gao <gaosong@loongson.cn> > Cc: zhaotianrui@loongson.cn > Signed-off-by: Xianglai Li <lixianglai@loongson.cn> > Tested-by: Andrea Bolognani <abologna@redhat.com> > Reviewed-by: Song Gao <gaosong@loongson.cn> > Message-Id: <0bd892aa9b88e0f4cc904cb70efd0251fc1cde29.1708336919.git.lixianglai@loongson.cn> > Signed-off-by: Song Gao <gaosong@loongson.cn> > --- > hw/loongarch/acpi-build.c | 29 +++++++++-- > hw/loongarch/virt.c | 101 ++++++++++++++++++++++++++---------- > include/hw/loongarch/virt.h | 10 ++-- > 3 files changed, 107 insertions(+), 33 deletions(-) > >
Hi huacai: > Hi, Xianglai, > > How to pass the BIOS file to qemu after this patch? With the old > cmdline I get an RCU stall and freeze the kvm host. The bios also has the corresponding code modification, you can update the code from the UEFI community to recompile UEFI, or you can directly obtain the compiled bios from the link below: https://github.com/lixianglai/LoongarchVirtFirmware Thanks, Xianglai. > Huacai > > On Sat, Mar 2, 2024 at 12:14 PM lixianglai <lixianglai@loongson.cn> wrote: >> Hi Philippe: >> >> On 29/2/24 12:38, Song Gao wrote: >> >> From: Xianglai Li <lixianglai@loongson.cn> >> >> The UEFI loading mode in loongarch is very different >> from that in other architectures:loongarch's UEFI code >> is in rom, while other architectures' UEFI code is in flash. >> >> loongarch UEFI can be loaded as follows: >> -machine virt,pflash=pflash0-format >> -bios ./QEMU_EFI.fd >> >> Other architectures load UEFI using the following methods: >> -machine virt,pflash0=pflash0-format,pflash1=pflash1-format >> >> loongarch's UEFI loading method makes qemu and libvirt incompatible >> when using NVRAM, and the cost of loongarch's current loading method >> far outweighs the benefits, so we decided to use the same UEFI loading >> scheme as other architectures. >> >> >> FYI I'm still trying to find a way to avoid that, planning to discuss >> more with libvirt folks. Well, maybe it is a waste of my time and I >> should just stop worrying / caring about this long standing issue. >> >> Thank you so much for your attention to this issue >> >> and your long-standing contributions to the community!!:-) >> >> Best regards, >> >> Xianglai. >> >> >> Cc: Andrea Bolognani <abologna@redhat.com> >> Cc: maobibo@loongson.cn >> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> >> Cc: Song Gao <gaosong@loongson.cn> >> Cc: zhaotianrui@loongson.cn >> Signed-off-by: Xianglai Li <lixianglai@loongson.cn> >> Tested-by: Andrea Bolognani <abologna@redhat.com> >> Reviewed-by: Song Gao <gaosong@loongson.cn> >> Message-Id: <0bd892aa9b88e0f4cc904cb70efd0251fc1cde29.1708336919.git.lixianglai@loongson.cn> >> Signed-off-by: Song Gao <gaosong@loongson.cn> >> --- >> hw/loongarch/acpi-build.c | 29 +++++++++-- >> hw/loongarch/virt.c | 101 ++++++++++++++++++++++++++---------- >> include/hw/loongarch/virt.h | 10 ++-- >> 3 files changed, 107 insertions(+), 33 deletions(-) >> >> >
diff --git a/hw/loongarch/acpi-build.c b/hw/loongarch/acpi-build.c index a1c4198741..e5ab1080af 100644 --- a/hw/loongarch/acpi-build.c +++ b/hw/loongarch/acpi-build.c @@ -314,16 +314,39 @@ static void build_pci_device_aml(Aml *scope, LoongArchMachineState *lams) static void build_flash_aml(Aml *scope, LoongArchMachineState *lams) { Aml *dev, *crs; + MemoryRegion *flash_mem; - hwaddr flash_base = VIRT_FLASH_BASE; - hwaddr flash_size = VIRT_FLASH_SIZE; + hwaddr flash0_base; + hwaddr flash0_size; + + hwaddr flash1_base; + hwaddr flash1_size; + + flash_mem = pflash_cfi01_get_memory(lams->flash[0]); + flash0_base = flash_mem->addr; + flash0_size = memory_region_size(flash_mem); + + flash_mem = pflash_cfi01_get_memory(lams->flash[1]); + flash1_base = flash_mem->addr; + flash1_size = memory_region_size(flash_mem); dev = aml_device("FLS0"); aml_append(dev, aml_name_decl("_HID", aml_string("LNRO0015"))); aml_append(dev, aml_name_decl("_UID", aml_int(0))); crs = aml_resource_template(); - aml_append(crs, aml_memory32_fixed(flash_base, flash_size, AML_READ_WRITE)); + aml_append(crs, aml_memory32_fixed(flash0_base, flash0_size, + AML_READ_WRITE)); + aml_append(dev, aml_name_decl("_CRS", crs)); + aml_append(scope, dev); + + dev = aml_device("FLS1"); + aml_append(dev, aml_name_decl("_HID", aml_string("LNRO0015"))); + aml_append(dev, aml_name_decl("_UID", aml_int(1))); + + crs = aml_resource_template(); + aml_append(crs, aml_memory32_fixed(flash1_base, flash1_size, + AML_READ_WRITE)); aml_append(dev, aml_name_decl("_CRS", crs)); aml_append(scope, dev); } diff --git a/hw/loongarch/virt.c b/hw/loongarch/virt.c index 0ad7d8c887..1e98d8bda5 100644 --- a/hw/loongarch/virt.c +++ b/hw/loongarch/virt.c @@ -54,7 +54,9 @@ struct loaderparams { const char *initrd_filename; }; -static void virt_flash_create(LoongArchMachineState *lams) +static PFlashCFI01 *virt_flash_create1(LoongArchMachineState *lams, + const char *name, + const char *alias_prop_name) { DeviceState *dev = qdev_new(TYPE_PFLASH_CFI01); @@ -66,45 +68,78 @@ static void virt_flash_create(LoongArchMachineState *lams) qdev_prop_set_uint16(dev, "id1", 0x18); qdev_prop_set_uint16(dev, "id2", 0x00); qdev_prop_set_uint16(dev, "id3", 0x00); - qdev_prop_set_string(dev, "name", "virt.flash"); - object_property_add_child(OBJECT(lams), "virt.flash", OBJECT(dev)); - object_property_add_alias(OBJECT(lams), "pflash", + qdev_prop_set_string(dev, "name", name); + object_property_add_child(OBJECT(lams), name, OBJECT(dev)); + object_property_add_alias(OBJECT(lams), alias_prop_name, OBJECT(dev), "drive"); + return PFLASH_CFI01(dev); +} - lams->flash = PFLASH_CFI01(dev); +static void virt_flash_create(LoongArchMachineState *lams) +{ + lams->flash[0] = virt_flash_create1(lams, "virt.flash0", "pflash0"); + lams->flash[1] = virt_flash_create1(lams, "virt.flash1", "pflash1"); } -static void virt_flash_map(LoongArchMachineState *lams, - MemoryRegion *sysmem) +static void virt_flash_map1(PFlashCFI01 *flash, + hwaddr base, hwaddr size, + MemoryRegion *sysmem) { - PFlashCFI01 *flash = lams->flash; DeviceState *dev = DEVICE(flash); - hwaddr base = VIRT_FLASH_BASE; - hwaddr size = VIRT_FLASH_SIZE; + BlockBackend *blk; + hwaddr real_size = size; + + blk = pflash_cfi01_get_blk(flash); + if (blk) { + real_size = blk_getlength(blk); + assert(real_size && real_size <= size); + } - assert(QEMU_IS_ALIGNED(size, VIRT_FLASH_SECTOR_SIZE)); - assert(size / VIRT_FLASH_SECTOR_SIZE <= UINT32_MAX); + assert(QEMU_IS_ALIGNED(real_size, VIRT_FLASH_SECTOR_SIZE)); + assert(real_size / VIRT_FLASH_SECTOR_SIZE <= UINT32_MAX); - qdev_prop_set_uint32(dev, "num-blocks", size / VIRT_FLASH_SECTOR_SIZE); + qdev_prop_set_uint32(dev, "num-blocks", real_size / VIRT_FLASH_SECTOR_SIZE); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); memory_region_add_subregion(sysmem, base, sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0)); +} +static void virt_flash_map(LoongArchMachineState *lams, + MemoryRegion *sysmem) +{ + PFlashCFI01 *flash0 = lams->flash[0]; + PFlashCFI01 *flash1 = lams->flash[1]; + + virt_flash_map1(flash0, VIRT_FLASH0_BASE, VIRT_FLASH0_SIZE, sysmem); + virt_flash_map1(flash1, VIRT_FLASH1_BASE, VIRT_FLASH1_SIZE, sysmem); } static void fdt_add_flash_node(LoongArchMachineState *lams) { MachineState *ms = MACHINE(lams); char *nodename; + MemoryRegion *flash_mem; + + hwaddr flash0_base; + hwaddr flash0_size; - hwaddr flash_base = VIRT_FLASH_BASE; - hwaddr flash_size = VIRT_FLASH_SIZE; + hwaddr flash1_base; + hwaddr flash1_size; - nodename = g_strdup_printf("/flash@%" PRIx64, flash_base); + flash_mem = pflash_cfi01_get_memory(lams->flash[0]); + flash0_base = flash_mem->addr; + flash0_size = memory_region_size(flash_mem); + + flash_mem = pflash_cfi01_get_memory(lams->flash[1]); + flash1_base = flash_mem->addr; + flash1_size = memory_region_size(flash_mem); + + nodename = g_strdup_printf("/flash@%" PRIx64, flash0_base); qemu_fdt_add_subnode(ms->fdt, nodename); qemu_fdt_setprop_string(ms->fdt, nodename, "compatible", "cfi-flash"); qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "reg", - 2, flash_base, 2, flash_size); + 2, flash0_base, 2, flash0_size, + 2, flash1_base, 2, flash1_size); qemu_fdt_setprop_cell(ms->fdt, nodename, "bank-width", 4); g_free(nodename); } @@ -637,12 +672,32 @@ static void loongarch_firmware_init(LoongArchMachineState *lams) { char *filename = MACHINE(lams)->firmware; char *bios_name = NULL; - int bios_size; + int bios_size, i; + BlockBackend *pflash_blk0; + MemoryRegion *mr; lams->bios_loaded = false; + /* Map legacy -drive if=pflash to machine properties */ + for (i = 0; i < ARRAY_SIZE(lams->flash); i++) { + pflash_cfi01_legacy_drive(lams->flash[i], + drive_get(IF_PFLASH, 0, i)); + } + virt_flash_map(lams, get_system_memory()); + pflash_blk0 = pflash_cfi01_get_blk(lams->flash[0]); + + if (pflash_blk0) { + if (filename) { + error_report("cannot use both '-bios' and '-drive if=pflash'" + "options at once"); + exit(1); + } + lams->bios_loaded = true; + return; + } + if (filename) { bios_name = qemu_find_file(QEMU_FILE_TYPE_BIOS, filename); if (!bios_name) { @@ -650,21 +705,15 @@ static void loongarch_firmware_init(LoongArchMachineState *lams) exit(1); } - bios_size = load_image_targphys(bios_name, VIRT_BIOS_BASE, VIRT_BIOS_SIZE); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(lams->flash[0]), 0); + bios_size = load_image_mr(bios_name, mr); if (bios_size < 0) { error_report("Could not load ROM image '%s'", bios_name); exit(1); } - g_free(bios_name); - - memory_region_init_ram(&lams->bios, NULL, "loongarch.bios", - VIRT_BIOS_SIZE, &error_fatal); - memory_region_set_readonly(&lams->bios, true); - memory_region_add_subregion(get_system_memory(), VIRT_BIOS_BASE, &lams->bios); lams->bios_loaded = true; } - } static void reset_load_elf(void *opaque) diff --git a/include/hw/loongarch/virt.h b/include/hw/loongarch/virt.h index 6ef9a92394..252f7df7f4 100644 --- a/include/hw/loongarch/virt.h +++ b/include/hw/loongarch/virt.h @@ -18,10 +18,12 @@ #define VIRT_FWCFG_BASE 0x1e020000UL #define VIRT_BIOS_BASE 0x1c000000UL -#define VIRT_BIOS_SIZE (4 * MiB) +#define VIRT_BIOS_SIZE (16 * MiB) #define VIRT_FLASH_SECTOR_SIZE (128 * KiB) -#define VIRT_FLASH_BASE 0x1d000000UL -#define VIRT_FLASH_SIZE (16 * MiB) +#define VIRT_FLASH0_BASE VIRT_BIOS_BASE +#define VIRT_FLASH0_SIZE VIRT_BIOS_SIZE +#define VIRT_FLASH1_BASE 0x1d000000UL +#define VIRT_FLASH1_SIZE (16 * MiB) #define VIRT_LOWMEM_BASE 0 #define VIRT_LOWMEM_SIZE 0x10000000 @@ -49,7 +51,7 @@ struct LoongArchMachineState { int fdt_size; DeviceState *platform_bus_dev; PCIBus *pci_bus; - PFlashCFI01 *flash; + PFlashCFI01 *flash[2]; MemoryRegion system_iocsr; MemoryRegion iocsr_mem; AddressSpace as_iocsr;