@@ -1128,6 +1128,7 @@ M: Inès Varhol <ines.varhol@telecom-paris.fr>
L: qemu-arm@nongnu.org
S: Maintained
F: hw/arm/stm32l4x5_soc.c
+F: hw/char/stm32l4x5_usart.c
F: hw/misc/stm32l4x5_exti.c
F: hw/misc/stm32l4x5_syscfg.c
F: hw/misc/stm32l4x5_rcc.c
@@ -41,6 +41,9 @@ config VIRTIO_SERIAL
config STM32F2XX_USART
bool
+config STM32L4X5_USART
+ bool
+
config CMSDK_APB_UART
bool
@@ -31,6 +31,7 @@ system_ss.add(when: 'CONFIG_RENESAS_SCI', if_true: files('renesas_sci.c'))
system_ss.add(when: 'CONFIG_SIFIVE_UART', if_true: files('sifive_uart.c'))
system_ss.add(when: 'CONFIG_SH_SCI', if_true: files('sh_serial.c'))
system_ss.add(when: 'CONFIG_STM32F2XX_USART', if_true: files('stm32f2xx_usart.c'))
+system_ss.add(when: 'CONFIG_STM32L4X5_USART', if_true: files('stm32l4x5_usart.c'))
system_ss.add(when: 'CONFIG_MCHP_PFSOC_MMUART', if_true: files('mchp_pfsoc_mmuart.c'))
system_ss.add(when: 'CONFIG_HTIF', if_true: files('riscv_htif.c'))
system_ss.add(when: 'CONFIG_GOLDFISH_TTY', if_true: files('goldfish_tty.c'))
new file mode 100644
@@ -0,0 +1,396 @@
+/*
+ * STM32L4X5 USART (Universal Synchronous Asynchronous Receiver Transmitter)
+ *
+ * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * The STM32L4X5 USART is heavily inspired by the stm32f2xx_usart
+ * by Alistair Francis.
+ * The reference used is the STMicroElectronics RM0351 Reference manual
+ * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qapi/error.h"
+#include "chardev/char-fe.h"
+#include "chardev/char-serial.h"
+#include "migration/vmstate.h"
+#include "hw/char/stm32l4x5_usart.h"
+#include "hw/clock.h"
+#include "hw/irq.h"
+#include "hw/qdev-clock.h"
+#include "hw/qdev-properties.h"
+#include "hw/qdev-properties-system.h"
+#include "hw/registerfields.h"
+#include "trace.h"
+
+
+REG32(CR1, 0x00)
+ FIELD(CR1, M1, 28, 1) /* Word length (part 2, see M0) */
+ FIELD(CR1, EOBIE, 27, 1) /* End of Block interrupt enable */
+ FIELD(CR1, RTOIE, 26, 1) /* Receiver timeout interrupt enable */
+ FIELD(CR1, DEAT, 21, 5) /* Driver Enable assertion time */
+ FIELD(CR1, DEDT, 16, 5) /* Driver Enable de-assertion time */
+ FIELD(CR1, OVER8, 15, 1) /* Oversampling mode */
+ FIELD(CR1, CMIE, 14, 1) /* Character match interrupt enable */
+ FIELD(CR1, MME, 13, 1) /* Mute mode enable */
+ FIELD(CR1, M0, 12, 1) /* Word length (part 1, see M1) */
+ FIELD(CR1, WAKE, 11, 1) /* Receiver wakeup method */
+ FIELD(CR1, PCE, 10, 1) /* Parity control enable */
+ FIELD(CR1, PS, 9, 1) /* Parity selection */
+ FIELD(CR1, PEIE, 8, 1) /* PE interrupt enable */
+ FIELD(CR1, TXEIE, 7, 1) /* TXE interrupt enable */
+ FIELD(CR1, TCIE, 6, 1) /* Transmission complete interrupt enable */
+ FIELD(CR1, RXNEIE, 5, 1) /* RXNE interrupt enable */
+ FIELD(CR1, IDLEIE, 4, 1) /* IDLE interrupt enable */
+ FIELD(CR1, TE, 3, 1) /* Transmitter enable */
+ FIELD(CR1, RE, 2, 1) /* Receiver enable */
+ FIELD(CR1, UESM, 1, 1) /* USART enable in Stop mode */
+ FIELD(CR1, UE, 0, 1) /* USART enable */
+REG32(CR2, 0x04)
+ FIELD(CR2, ADD_1, 28, 4) /* ADD[7:4] */
+ FIELD(CR2, ADD_0, 24, 1) /* ADD[3:0] */
+ FIELD(CR2, RTOEN, 23, 1) /* Receiver timeout enable */
+ FIELD(CR2, ABRMOD, 21, 2) /* Auto baud rate mode */
+ FIELD(CR2, ABREN, 20, 1) /* Auto baud rate enable */
+ FIELD(CR2, MSBFIRST, 19, 1) /* Most significant bit first */
+ FIELD(CR2, DATAINV, 18, 1) /* Binary data inversion */
+ FIELD(CR2, TXINV, 17, 1) /* TX pin active level inversion */
+ FIELD(CR2, RXINV, 16, 1) /* RX pin active level inversion */
+ FIELD(CR2, SWAP, 15, 1) /* Swap RX/TX pins */
+ FIELD(CR2, LINEN, 14, 1) /* LIN mode enable */
+ FIELD(CR2, STOP, 12, 2) /* STOP bits */
+ FIELD(CR2, CLKEN, 11, 1) /* Clock enable */
+ FIELD(CR2, CPOL, 10, 1) /* Clock polarity */
+ FIELD(CR2, CPHA, 9, 1) /* Clock phase */
+ FIELD(CR2, LBCL, 8, 1) /* Last bit clock pulse */
+ FIELD(CR2, LBDIE, 6, 1) /* LIN break detection interrupt enable */
+ FIELD(CR2, LBDL, 5, 1) /* LIN break detection length */
+ FIELD(CR2, ADDM7, 4, 1) /* 7-bit Address Detection /
+ * 4-bit Address Detection */
+REG32(CR3, 0x08)
+ /* TCBGTIE only on STM32L496xx/4A6xx devices */
+ FIELD(CR3, UCESM, 23, 1) /* USART Clock Enable in Stop Mode */
+ FIELD(CR3, WUFIE, 22, 1) /* Wakeup from Stop mode interrupt enable */
+ FIELD(CR3, WUS, 20, 2) /* Wakeup from Stop mode interrupt flag selection */
+ FIELD(CR3, SCARCNT, 17, 3) /* Smartcard auto-retry count */
+ FIELD(CR3, DEP, 15, 1) /* Driver enable polarity selection */
+ FIELD(CR3, DEM, 14, 1) /* Driver enable mode */
+ FIELD(CR3, DDRE, 13, 1) /* DMA Disable on Reception Error */
+ FIELD(CR3, OVRDIS, 12, 1) /* Overrun Disable */
+ FIELD(CR3, ONEBIT, 11, 1) /* One sample bit method enable */
+ FIELD(CR3, CTSIE, 10, 1) /* CTS interrupt enable */
+ FIELD(CR3, CTSE, 9, 1) /* CTS enable */
+ FIELD(CR3, RTSE, 8, 1) /* RTS enable */
+ FIELD(CR3, DMAT, 7, 1) /* DMA enable transmitter */
+ FIELD(CR3, DMAR, 6, 1) /* DMA enable receiver */
+ FIELD(CR3, SCEN, 5, 1) /* Smartcard mode enable */
+ FIELD(CR3, NACK, 4, 1) /* Smartcard NACK enable */
+ FIELD(CR3, HDSEL, 3, 1) /* Half-duplex selection */
+ FIELD(CR3, IRLP, 2, 1) /* IrDA low-power */
+ FIELD(CR3, IREN, 1, 1) /* IrDA mode enable */
+ FIELD(CR3, EIE, 0, 1) /* Error interrupt enable */
+REG32(BRR, 0x0C)
+ FIELD(BRR, BRR, 0, 16)
+REG32(GTPR, 0x10)
+ FIELD(GTPR, GT, 8, 8) /* Guard time value */
+ FIELD(GTPR, PSC, 0, 8) /* Prescaler value */
+REG32(RTOR, 0x14)
+ FIELD(RTOR, BLEN, 24, 8) /* Block Length */
+ FIELD(RTOR, RTO, 0, 24) /* Receiver timeout value */
+REG32(RQR, 0x18)
+ FIELD(RQR, TXFRQ, 4, 1) /* Transmit data flush request */
+ FIELD(RQR, RXFRQ, 3, 1) /* Receive data flush request */
+ FIELD(RQR, MMRQ, 2, 1) /* Mute mode request */
+ FIELD(RQR, SBKRQ, 1, 1) /* Send break request */
+ FIELD(RQR, ABBRRQ, 0, 1) /* Auto baud rate request */
+REG32(ISR, 0x1C)
+ /* TCBGT only for STM32L475xx/476xx/486xx devices */
+ FIELD(ISR, REACK, 22, 1) /* Receive enable acknowledge flag */
+ FIELD(ISR, TEACK, 21, 1) /* Transmit enable acknowledge flag */
+ FIELD(ISR, WUF, 20, 1) /* Wakeup from Stop mode flag */
+ FIELD(ISR, RWU, 19, 1) /* Receiver wakeup from Mute mode */
+ FIELD(ISR, SBKF, 18, 1) /* Send break flag */
+ FIELD(ISR, CMF, 17, 1) /* Character match flag */
+ FIELD(ISR, BUSY, 16, 1) /* Busy flag */
+ FIELD(ISR, ABRF, 15, 1) /* Auto Baud rate flag */
+ FIELD(ISR, ABRE, 14, 1) /* Auto Baud rate error */
+ FIELD(ISR, EOBF, 12, 1) /* End of block flag */
+ FIELD(ISR, RTOF, 11, 1) /* Receiver timeout */
+ FIELD(ISR, CTS, 10, 1) /* CTS flag */
+ FIELD(ISR, CTSIF, 9, 1) /* CTS interrupt flag */
+ FIELD(ISR, LBDF, 8, 1) /* LIN break detection flag */
+ FIELD(ISR, TXE, 7, 1) /* Transmit data register empty */
+ FIELD(ISR, TC, 6, 1) /* Transmission complete */
+ FIELD(ISR, RXNE, 5, 1) /* Read data register not empty */
+ FIELD(ISR, IDLE, 4, 1) /* Idle line detected */
+ FIELD(ISR, ORE, 3, 1) /* Overrun error */
+ FIELD(ISR, NF, 2, 1) /* START bit Noise detection flag */
+ FIELD(ISR, FE, 1, 1) /* Framing Error*/
+ FIELD(ISR, PE, 0, 1) /* Parity Error*/
+REG32(ICR, 0x20)
+ FIELD(ICR, WUCF, 20, 1) /* Wakeup from Stop mode clear flag */
+ FIELD(ICR, CMCF, 17, 1) /* Character match clear flag */
+ FIELD(ICR, EOBCF, 12, 1) /* End of block clear flag */
+ FIELD(ICR, RTOCF, 11, 1) /* Receiver timeout clear flag */
+ FIELD(ICR, CTSCF, 9, 1) /* CTS clear flag */
+ FIELD(ICR, LBDCF, 8, 1) /* LIN break detection clear flag */
+ /* TCBGTCF only on STM32L496xx/4A6xx devices */
+ FIELD(ICR, TCCF, 6, 1) /* Transmission complete clear flag */
+ FIELD(ICR, IDLECF, 4, 1) /* Idle line detected clear flag */
+ FIELD(ICR, ORECF, 3, 1) /* Overrun error clear flag */
+ FIELD(ICR, NCF, 2, 1) /* Noise detected clear flag */
+ FIELD(ICR, FECF, 1, 1) /* Framing error clear flag */
+ FIELD(ICR, PECF, 0, 1) /* Parity error clear flag */
+REG32(RDR, 0x24)
+ FIELD(RDR, RDR, 0, 9)
+REG32(TDR, 0x28)
+ FIELD(TDR, TDR, 0, 9)
+
+static void stm32l4x5_usart_base_reset_hold(Object *obj)
+{
+ Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj);
+
+ s->cr1 = 0x00000000;
+ s->cr2 = 0x00000000;
+ s->cr3 = 0x00000000;
+ s->brr = 0x00000000;
+ s->gtpr = 0x00000000;
+ s->rtor = 0x00000000;
+ s->isr = 0x020000C0;
+ s->rdr = 0x00000000;
+ s->tdr = 0x00000000;
+}
+
+static uint64_t stm32l4x5_usart_base_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ Stm32l4x5UsartBaseState *s = opaque;
+ uint64_t retvalue = 0;
+
+ switch (addr) {
+ case A_CR1:
+ retvalue = s->cr1;
+ break;
+ case A_CR2:
+ retvalue = s->cr2;
+ break;
+ case A_CR3:
+ retvalue = s->cr3;
+ break;
+ case A_BRR:
+ retvalue = FIELD_EX32(s->brr, BRR, BRR);
+ break;
+ case A_GTPR:
+ retvalue = s->gtpr;
+ break;
+ case A_RTOR:
+ retvalue = s->rtor;
+ break;
+ case A_RQR:
+ /* RQR is a write only register */
+ retvalue = 0x00000000;
+ break;
+ case A_ISR:
+ retvalue = s->isr;
+ break;
+ case A_ICR:
+ /* ICR is a clear register */
+ retvalue = 0x00000000;
+ break;
+ case A_RDR:
+ retvalue = FIELD_EX32(s->rdr, RDR, RDR);
+ /* Reset RXNE flag */
+ s->isr &= ~R_ISR_RXNE_MASK;
+ break;
+ case A_TDR:
+ retvalue = FIELD_EX32(s->tdr, TDR, TDR);
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr);
+ break;
+ }
+
+ trace_stm32l4x5_usart_read(addr, retvalue);
+
+ return retvalue;
+}
+
+static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr,
+ uint64_t val64, unsigned int size)
+{
+ Stm32l4x5UsartBaseState *s = opaque;
+ const uint32_t value = val64;
+
+ trace_stm32l4x5_usart_write(addr, value);
+
+ switch (addr) {
+ case A_CR1:
+ s->cr1 = value;
+ return;
+ case A_CR2:
+ s->cr2 = value;
+ return;
+ case A_CR3:
+ s->cr3 = value;
+ return;
+ case A_BRR:
+ s->brr = value;
+ return;
+ case A_GTPR:
+ s->gtpr = value;
+ return;
+ case A_RTOR:
+ s->rtor = value;
+ return;
+ case A_RQR:
+ return;
+ case A_ISR:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: ISR is read only !\n", __func__);
+ return;
+ case A_ICR:
+ /* Clear the status flags */
+ s->isr &= ~value;
+ return;
+ case A_RDR:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: RDR is read only !\n", __func__);
+ return;
+ case A_TDR:
+ s->tdr = value;
+ return;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr);
+ }
+}
+
+static const MemoryRegionOps stm32l4x5_usart_base_ops = {
+ .read = stm32l4x5_usart_base_read,
+ .write = stm32l4x5_usart_base_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid = {
+ .max_access_size = 4,
+ .min_access_size = 4,
+ .unaligned = false
+ },
+ .impl = {
+ .max_access_size = 4,
+ .min_access_size = 4,
+ .unaligned = false
+ },
+};
+
+static Property stm32l4x5_usart_base_properties[] = {
+ DEFINE_PROP_CHR("chardev", Stm32l4x5UsartBaseState, chr),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void stm32l4x5_usart_base_init(Object *obj)
+{
+ Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj);
+
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
+
+ memory_region_init_io(&s->mmio, obj, &stm32l4x5_usart_base_ops, s,
+ TYPE_STM32L4X5_USART_BASE, 0x400);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+
+ s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0);
+}
+
+static const VMStateDescription vmstate_stm32l4x5_usart_base = {
+ .name = TYPE_STM32L4X5_USART_BASE,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(cr1, Stm32l4x5UsartBaseState),
+ VMSTATE_UINT32(cr2, Stm32l4x5UsartBaseState),
+ VMSTATE_UINT32(cr3, Stm32l4x5UsartBaseState),
+ VMSTATE_UINT32(brr, Stm32l4x5UsartBaseState),
+ VMSTATE_UINT32(gtpr, Stm32l4x5UsartBaseState),
+ VMSTATE_UINT32(rtor, Stm32l4x5UsartBaseState),
+ VMSTATE_UINT32(isr, Stm32l4x5UsartBaseState),
+ VMSTATE_UINT32(rdr, Stm32l4x5UsartBaseState),
+ VMSTATE_UINT32(tdr, Stm32l4x5UsartBaseState),
+ VMSTATE_CLOCK(clk, Stm32l4x5UsartBaseState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+
+static void stm32l4x5_usart_base_realize(DeviceState *dev, Error **errp)
+{
+ ERRP_GUARD();
+ Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(dev);
+ if (!clock_has_source(s->clk)) {
+ error_setg(errp, "USART clock must be wired up by SoC code");
+ return;
+ }
+}
+
+static void stm32l4x5_usart_base_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+
+ rc->phases.hold = stm32l4x5_usart_base_reset_hold;
+ device_class_set_props(dc, stm32l4x5_usart_base_properties);
+ dc->realize = stm32l4x5_usart_base_realize;
+ dc->vmsd = &vmstate_stm32l4x5_usart_base;
+}
+
+static void stm32l4x5_usart_class_init(ObjectClass *oc, void *data)
+{
+ Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc);
+
+ subc->type = STM32L4x5_USART;
+}
+
+static void stm32l4x5_uart_class_init(ObjectClass *oc, void *data)
+{
+ Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc);
+
+ subc->type = STM32L4x5_UART;
+}
+
+static void stm32l4x5_lpuart_class_init(ObjectClass *oc, void *data)
+{
+ Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc);
+
+ subc->type = STM32L4x5_LPUART;
+}
+
+static const TypeInfo stm32l4x5_usart_types[] = {
+ {
+ .name = TYPE_STM32L4X5_USART_BASE,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(Stm32l4x5UsartBaseState),
+ .instance_init = stm32l4x5_usart_base_init,
+ .class_init = stm32l4x5_usart_base_class_init,
+ .abstract = true,
+ }, {
+ .name = TYPE_STM32L4X5_USART,
+ .parent = TYPE_STM32L4X5_USART_BASE,
+ .class_init = stm32l4x5_usart_class_init,
+ }, {
+ .name = TYPE_STM32L4X5_UART,
+ .parent = TYPE_STM32L4X5_USART_BASE,
+ .class_init = stm32l4x5_uart_class_init,
+ }, {
+ .name = TYPE_STM32L4X5_LPUART,
+ .parent = TYPE_STM32L4X5_USART_BASE,
+ .class_init = stm32l4x5_lpuart_class_init,
+ }
+};
+
+DEFINE_TYPES(stm32l4x5_usart_types)
@@ -106,6 +106,10 @@ cadence_uart_baudrate(unsigned baudrate) "baudrate %u"
sh_serial_read(char *id, unsigned size, uint64_t offs, uint64_t val) " %s size %d offs 0x%02" PRIx64 " -> 0x%02" PRIx64
sh_serial_write(char *id, unsigned size, uint64_t offs, uint64_t val) "%s size %d offs 0x%02" PRIx64 " <- 0x%02" PRIx64
+# stm32l4x5_usart.c
+stm32l4x5_usart_read(uint64_t addr, uint32_t data) "USART: Read <0x%" PRIx64 "> -> 0x%" PRIx32 ""
+stm32l4x5_usart_write(uint64_t addr, uint32_t data) "USART: Write <0x%" PRIx64 "> <- 0x%" PRIx32 ""
+
# xen_console.c
xen_console_connect(unsigned int idx, unsigned int ring_ref, unsigned int port, unsigned int limit) "idx %u ring_ref %u port %u limit %u"
xen_console_disconnect(unsigned int idx) "idx %u"
new file mode 100644
@@ -0,0 +1,66 @@
+/*
+ * STM32L4X5 USART (Universal Synchronous Asynchronous Receiver Transmitter)
+ *
+ * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * The STM32L4X5 USART is heavily inspired by the stm32f2xx_usart
+ * by Alistair Francis.
+ * The reference used is the STMicroElectronics RM0351 Reference manual
+ * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs.
+ */
+
+#ifndef HW_STM32L4X5_USART_H
+#define HW_STM32L4X5_USART_H
+
+#include "hw/sysbus.h"
+#include "chardev/char-fe.h"
+#include "qom/object.h"
+
+#define TYPE_STM32L4X5_USART_BASE "stm32l4x5-usart-base"
+#define TYPE_STM32L4X5_USART "stm32l4x5-usart"
+#define TYPE_STM32L4X5_UART "stm32l4x5-uart"
+#define TYPE_STM32L4X5_LPUART "stm32l4x5-lpuart"
+OBJECT_DECLARE_TYPE(Stm32l4x5UsartBaseState, Stm32l4x5UsartBaseClass,
+ STM32L4X5_USART_BASE)
+
+typedef enum {
+ STM32L4x5_USART,
+ STM32L4x5_UART,
+ STM32L4x5_LPUART,
+} Stm32l4x5UsartType;
+
+struct Stm32l4x5UsartBaseState {
+ SysBusDevice parent_obj;
+
+ MemoryRegion mmio;
+
+ uint32_t cr1;
+ uint32_t cr2;
+ uint32_t cr3;
+ uint32_t brr;
+ uint32_t gtpr;
+ uint32_t rtor;
+ /* rqr is write-only */
+ uint32_t isr;
+ /* icr is a clear register */
+ uint32_t rdr;
+ uint32_t tdr;
+
+ Clock *clk;
+ CharBackend chr;
+ qemu_irq irq;
+};
+
+struct Stm32l4x5UsartBaseClass {
+ SysBusDeviceClass parent_class;
+
+ Stm32l4x5UsartType type;
+};
+
+#endif /* HW_STM32L4X5_USART_H */