Message ID | 20240416091904.935283-17-jamin_lin@aspeedtech.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | Add AST2700 support | expand |
On 4/16/24 11:19, Jamin Lin wrote: > Add AST2700 Evaluation board and its boot command. > > Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Thanks, C. > --- > docs/system/arm/aspeed.rst | 39 ++++++++++++++++++++++++++++++++++---- > 1 file changed, 35 insertions(+), 4 deletions(-) > > diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst > index b2dea54eed..320ff2a4cd 100644 > --- a/docs/system/arm/aspeed.rst > +++ b/docs/system/arm/aspeed.rst > @@ -1,11 +1,12 @@ > -Aspeed family boards (``*-bmc``, ``ast2500-evb``, ``ast2600-evb``) > -================================================================== > +Aspeed family boards (``*-bmc``, ``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``) > +=================================================================================== > > The QEMU Aspeed machines model BMCs of various OpenPOWER systems and > Aspeed evaluation boards. They are based on different releases of the > Aspeed SoC : the AST2400 integrating an ARM926EJ-S CPU (400MHz), the > -AST2500 with an ARM1176JZS CPU (800MHz) and more recently the AST2600 > -with dual cores ARM Cortex-A7 CPUs (1.2GHz). > +AST2500 with an ARM1176JZS CPU (800MHz), the AST2600 > +with dual cores ARM Cortex-A7 CPUs (1.2GHz) and more recently the AST2700 > +with quad cores ARM Cortex-A35 64 bits CPUs (1.6GHz) > > The SoC comes with RAM, Gigabit ethernet, USB, SD/MMC, USB, SPI, I2C, > etc. > @@ -38,6 +39,10 @@ AST2600 SoC based machines : > - ``qcom-dc-scm-v1-bmc`` Qualcomm DC-SCM V1 BMC > - ``qcom-firework-bmc`` Qualcomm Firework BMC > > +AST2700 SoC based machines : > + > +- ``ast2700-evb`` Aspeed AST2700 Evaluation board (Cortex-A35) > + > Supported devices > ----------------- > > @@ -66,6 +71,7 @@ Supported devices > * eMMC Boot Controller (dummy) > * PECI Controller (minimal) > * I3C Controller > + * Internal Bridge Controller (SLI dummy) > > > Missing devices > @@ -95,6 +101,10 @@ or directly from the OpenBMC GitHub release repository : > > https://github.com/openbmc/openbmc/releases > > +or directly from the ASPEED Forked OpenBMC GitHub release repository : > + > + https://github.com/AspeedTech-BMC/openbmc/releases > + > To boot a kernel directly from a Linux build tree: > > .. code-block:: bash > @@ -164,6 +174,27 @@ under Linux), use : > > -M ast2500-evb,bmc-console=uart3 > > + > +Boot the AST2700 machine from the flash image, use an MTD drive : > + > +.. code-block:: bash > + > + IMGDIR=ast2700-default > + UBOOT_SIZE=$(stat --format=%s -L ${IMGDIR}/u-boot-nodtb.bin) > + > + $ qemu-system-aarch64 -M ast2700-evb \ > + -device loader,force-raw=on,addr=0x400000000,file=${IMGDIR}/u-boot-nodtb.bin \ > + -device loader,force-raw=on,addr=$((0x400000000 + ${UBOOT_SIZE})),file=u-boot.dtb \ > + -device loader,force-raw=on,addr=0x430000000,file=${IMGDIR}/bl31.bin \ > + -device loader,force-raw=on,addr=0x430080000,file=${IMGDIR}/optee/tee-raw.bin \ > + -device loader,cpu-num=0,addr=0x430000000 \ > + -device loader,cpu-num=1,addr=0x430000000 \ > + -device loader,cpu-num=2,addr=0x430000000 \ > + -device loader,cpu-num=3,addr=0x430000000 \ > + -smp 4 \ > + -drive file=${IMGDIR}/image-bmc,format=raw,if=mtd \ > + -nographic > + > Aspeed minibmc family boards (``ast1030-evb``) > ================================================================== >
diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index b2dea54eed..320ff2a4cd 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -1,11 +1,12 @@ -Aspeed family boards (``*-bmc``, ``ast2500-evb``, ``ast2600-evb``) -================================================================== +Aspeed family boards (``*-bmc``, ``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``) +=================================================================================== The QEMU Aspeed machines model BMCs of various OpenPOWER systems and Aspeed evaluation boards. They are based on different releases of the Aspeed SoC : the AST2400 integrating an ARM926EJ-S CPU (400MHz), the -AST2500 with an ARM1176JZS CPU (800MHz) and more recently the AST2600 -with dual cores ARM Cortex-A7 CPUs (1.2GHz). +AST2500 with an ARM1176JZS CPU (800MHz), the AST2600 +with dual cores ARM Cortex-A7 CPUs (1.2GHz) and more recently the AST2700 +with quad cores ARM Cortex-A35 64 bits CPUs (1.6GHz) The SoC comes with RAM, Gigabit ethernet, USB, SD/MMC, USB, SPI, I2C, etc. @@ -38,6 +39,10 @@ AST2600 SoC based machines : - ``qcom-dc-scm-v1-bmc`` Qualcomm DC-SCM V1 BMC - ``qcom-firework-bmc`` Qualcomm Firework BMC +AST2700 SoC based machines : + +- ``ast2700-evb`` Aspeed AST2700 Evaluation board (Cortex-A35) + Supported devices ----------------- @@ -66,6 +71,7 @@ Supported devices * eMMC Boot Controller (dummy) * PECI Controller (minimal) * I3C Controller + * Internal Bridge Controller (SLI dummy) Missing devices @@ -95,6 +101,10 @@ or directly from the OpenBMC GitHub release repository : https://github.com/openbmc/openbmc/releases +or directly from the ASPEED Forked OpenBMC GitHub release repository : + + https://github.com/AspeedTech-BMC/openbmc/releases + To boot a kernel directly from a Linux build tree: .. code-block:: bash @@ -164,6 +174,27 @@ under Linux), use : -M ast2500-evb,bmc-console=uart3 + +Boot the AST2700 machine from the flash image, use an MTD drive : + +.. code-block:: bash + + IMGDIR=ast2700-default + UBOOT_SIZE=$(stat --format=%s -L ${IMGDIR}/u-boot-nodtb.bin) + + $ qemu-system-aarch64 -M ast2700-evb \ + -device loader,force-raw=on,addr=0x400000000,file=${IMGDIR}/u-boot-nodtb.bin \ + -device loader,force-raw=on,addr=$((0x400000000 + ${UBOOT_SIZE})),file=u-boot.dtb \ + -device loader,force-raw=on,addr=0x430000000,file=${IMGDIR}/bl31.bin \ + -device loader,force-raw=on,addr=0x430080000,file=${IMGDIR}/optee/tee-raw.bin \ + -device loader,cpu-num=0,addr=0x430000000 \ + -device loader,cpu-num=1,addr=0x430000000 \ + -device loader,cpu-num=2,addr=0x430000000 \ + -device loader,cpu-num=3,addr=0x430000000 \ + -smp 4 \ + -drive file=${IMGDIR}/image-bmc,format=raw,if=mtd \ + -nographic + Aspeed minibmc family boards (``ast1030-evb``) ==================================================================