diff mbox series

[3/9] scsi/constant: add persistent reservation in/out protocol constants

Message ID 20240508093629.441057-4-luchangqi.123@bytedance.com (mailing list archive)
State New
Headers show
Series Support persistent reservation operations | expand

Commit Message

Changqi Lu May 8, 2024, 9:36 a.m. UTC 
Add constants for the persistent reservation in/out protocol
in the scsi/constant module. The constants include the persistent
reservation command, type, and scope values defined in sections
6.13 and 6.14 of the SCSI Primary Commands-4 (SPC-4) specification.

Signed-off-by: Changqi Lu <luchangqi.123@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
---
 include/scsi/constants.h | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

Comments

Stefan Hajnoczi May 9, 2024, 6:28 p.m. UTC | #1 
On Wed, May 08, 2024 at 05:36:23PM +0800, Changqi Lu wrote:
> Add constants for the persistent reservation in/out protocol
> in the scsi/constant module. The constants include the persistent
> reservation command, type, and scope values defined in sections
> 6.13 and 6.14 of the SCSI Primary Commands-4 (SPC-4) specification.
> 
> Signed-off-by: Changqi Lu <luchangqi.123@bytedance.com>
> Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
> ---
>  include/scsi/constants.h | 29 +++++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
diff mbox series

Patch

diff --git a/include/scsi/constants.h b/include/scsi/constants.h
index 9b98451912..511cb3d03e 100644
--- a/include/scsi/constants.h
+++ b/include/scsi/constants.h
@@ -319,4 +319,33 @@ 
 #define IDENT_DESCR_TGT_DESCR_SIZE 32
 #define XCOPY_BLK2BLK_SEG_DESC_SIZE 28
 
+typedef enum {
+    SCSI_PR_WRITE_EXCLUSIVE                 = 0x01,
+    SCSI_PR_EXCLUSIVE_ACCESS                = 0x03,
+    SCSI_PR_WRITE_EXCLUSIVE_REGS_ONLY       = 0x05,
+    SCSI_PR_EXCLUSIVE_ACCESS_REGS_ONLY      = 0x06,
+    SCSI_PR_WRITE_EXCLUSIVE_ALL_REGS        = 0x07,
+    SCSI_PR_EXCLUSIVE_ACCESS_ALL_REGS       = 0x08,
+} SCSIPrType;
+
+typedef enum {
+    SCSI_PR_LU_SCOPE          = 0x00,
+} SCSIPrScope;
+
+typedef enum {
+    SCSI_PR_OUT_REGISTER                 = 0x0,
+    SCSI_PR_OUT_RESERVE                  = 0x1,
+    SCSI_PR_OUT_RELEASE                  = 0x2,
+    SCSI_PR_OUT_CLEAR                    = 0x3,
+    SCSI_PR_OUT_PREEMPT                  = 0x4,
+    SCSI_PR_OUT_PREEMPT_AND_ABORT        = 0x5,
+    SCSI_PR_OUT_REG_AND_IGNORE_KEY       = 0x6,
+    SCSI_PR_OUT_REG_AND_MOVE             = 0x7,
+} SCSIPrOutAction;
+
+typedef enum {
+    SCSI_PR_IN_READ_KEYS                 = 0x0,
+    SCSI_PR_IN_READ_RESERVATION          = 0x1,
+} SCSIPrInAction;
+
 #endif