@@ -526,6 +526,24 @@ static inline unsigned int get_sp_mask(unsigned int e2)
}
}
+static int exception_is_fault(int intno)
+{
+ switch (intno) {
+ /*
+ * #DB can be both fault- and trap-like, but it never sets RF=1
+ * in the RFLAGS value pushed on the stack.
+ */
+ case EXCP01_DB:
+ case EXCP03_INT3:
+ case EXCP04_INTO:
+ case EXCP08_DBLE:
+ case EXCP12_MCHK:
+ return 0;
+ }
+ /* Everything else including reserved exception is a fault. */
+ return 1;
+}
+
int exception_has_error_code(int intno)
{
switch (intno) {
@@ -605,8 +623,9 @@ static void do_interrupt_protected(CPUX86State *env, int intno, int is_int,
int type, dpl, selector, ss_dpl, cpl;
int has_error_code, new_stack, shift;
uint32_t e1, e2, offset, ss = 0, esp, ss_e1 = 0, ss_e2 = 0;
- uint32_t old_eip, sp_mask;
+ uint32_t old_eip, sp_mask, eflags;
int vm86 = env->eflags & VM_MASK;
+ bool set_rf;
has_error_code = 0;
if (!is_int && !is_hw) {
@@ -614,8 +633,10 @@ static void do_interrupt_protected(CPUX86State *env, int intno, int is_int,
}
if (is_int) {
old_eip = next_eip;
+ set_rf = false;
} else {
old_eip = env->eip;
+ set_rf = exception_is_fault(intno);
}
dt = &env->idt;
@@ -748,6 +769,15 @@ static void do_interrupt_protected(CPUX86State *env, int intno, int is_int,
}
push_size <<= shift;
#endif
+ eflags = cpu_compute_eflags(env);
+ /*
+ * AMD states that code breakpoint #DBs clear RF=0, Intel leaves it
+ * as is. AMD behavior could be implemented in check_hw_breakpoints().
+ */
+ if (set_rf) {
+ eflags |= RF_MASK;
+ }
+
if (shift == 1) {
if (new_stack) {
if (vm86) {
@@ -759,7 +789,7 @@ static void do_interrupt_protected(CPUX86State *env, int intno, int is_int,
PUSHL(ssp, esp, sp_mask, env->segs[R_SS].selector);
PUSHL(ssp, esp, sp_mask, env->regs[R_ESP]);
}
- PUSHL(ssp, esp, sp_mask, cpu_compute_eflags(env));
+ PUSHL(ssp, esp, sp_mask, eflags);
PUSHL(ssp, esp, sp_mask, env->segs[R_CS].selector);
PUSHL(ssp, esp, sp_mask, old_eip);
if (has_error_code) {
@@ -776,7 +806,7 @@ static void do_interrupt_protected(CPUX86State *env, int intno, int is_int,
PUSHW(ssp, esp, sp_mask, env->segs[R_SS].selector);
PUSHW(ssp, esp, sp_mask, env->regs[R_ESP]);
}
- PUSHW(ssp, esp, sp_mask, cpu_compute_eflags(env));
+ PUSHW(ssp, esp, sp_mask, eflags);
PUSHW(ssp, esp, sp_mask, env->segs[R_CS].selector);
PUSHW(ssp, esp, sp_mask, old_eip);
if (has_error_code) {
@@ -868,8 +898,9 @@ static void do_interrupt64(CPUX86State *env, int intno, int is_int,
target_ulong ptr;
int type, dpl, selector, cpl, ist;
int has_error_code, new_stack;
- uint32_t e1, e2, e3, ss;
+ uint32_t e1, e2, e3, ss, eflags;
target_ulong old_eip, esp, offset;
+ bool set_rf;
has_error_code = 0;
if (!is_int && !is_hw) {
@@ -877,8 +908,10 @@ static void do_interrupt64(CPUX86State *env, int intno, int is_int,
}
if (is_int) {
old_eip = next_eip;
+ set_rf = false;
} else {
old_eip = env->eip;
+ set_rf = exception_is_fault(intno);
}
dt = &env->idt;
@@ -950,9 +983,15 @@ static void do_interrupt64(CPUX86State *env, int intno, int is_int,
}
esp &= ~0xfLL; /* align stack */
+ /* See do_interrupt_protected. */
+ eflags = cpu_compute_eflags(env);
+ if (set_rf) {
+ eflags |= RF_MASK;
+ }
+
PUSHQ(esp, env->segs[R_SS].selector);
PUSHQ(esp, env->regs[R_ESP]);
- PUSHQ(esp, cpu_compute_eflags(env));
+ PUSHQ(esp, eflags);
PUSHQ(esp, env->segs[R_CS].selector);
PUSHQ(esp, old_eip);
if (has_error_code) {
@@ -4630,6 +4630,14 @@ static void i386_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cpu)
* If jmp_opt, we want to handle each string instruction individually.
* For icount also disable repz optimization so that each iteration
* is accounted separately.
+ *
+ * FIXME: this is messy; it makes REP string instructions a lot less
+ * efficient than they should be and it gets in the way of correct
+ * handling of RF (interrupts or traps arriving after any iteration
+ * of a repeated string instruction but the last should set RF to 1).
+ * Perhaps it would be more efficient if REP string instructions were
+ * always at the beginning of the TB, or even their own TB? That
+ * would even allow accounting up to 64k iterations at once for icount.
*/
dc->repz_opt = !dc->jmp_opt && !(cflags & CF_USE_ICOUNT);
When preparing an exception stack frame for a fault exception, the value pushed for RF is 1. Take that into account. The same should be true of interrupts for repeated string instructions, but the situation there is complicated. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> --- target/i386/tcg/seg_helper.c | 49 ++++++++++++++++++++++++++++++++---- target/i386/tcg/translate.c | 8 ++++++ 2 files changed, 52 insertions(+), 5 deletions(-)