@@ -39,6 +39,9 @@ config POWERNV
select PCI_POWERNV
select PCA9552
select PCA9554
+ select SSI
+ select SSI_M25P80
+ select PNV_SPI
config PPC405
bool
@@ -24,3 +24,7 @@ config STM32F2XX_SPI
config BCM2835_SPI
bool
select SSI
+
+config PNV_SPI
+ bool
+ select SSI
@@ -12,3 +12,4 @@ system_ss.add(when: 'CONFIG_IMX', if_true: files('imx_spi.c'))
system_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_spi.c'))
system_ss.add(when: 'CONFIG_IBEX', if_true: files('ibex_spi_host.c'))
system_ss.add(when: 'CONFIG_BCM2835_SPI', if_true: files('bcm2835_spi.c'))
+system_ss.add(when: 'CONFIG_PNV_SPI', if_true: files('pnv_spi.c'))
new file mode 100644
@@ -0,0 +1,215 @@
+/*
+ * QEMU PowerPC SPI model
+ *
+ * Copyright (c) 2024, IBM Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/qdev-properties.h"
+#include "hw/ppc/pnv_xscom.h"
+#include "hw/ssi/pnv_spi.h"
+#include "hw/ssi/pnv_spi_regs.h"
+#include "hw/ssi/ssi.h"
+#include <libfdt.h>
+#include "hw/irq.h"
+#include "trace.h"
+
+/*
+ * Macro from include/hw/ppc/fdt.h
+ * fdt.h cannot be included here as it contain ppc target specific dependency.
+ */
+#define _FDT(exp) \
+ do { \
+ int _ret = (exp); \
+ if (_ret < 0) { \
+ qemu_log_mask(LOG_GUEST_ERROR, \
+ "error creating device tree: %s: %s", \
+ #exp, fdt_strerror(_ret)); \
+ exit(1); \
+ } \
+ } while (0)
+
+static uint64_t pnv_spi_xscom_read(void *opaque, hwaddr addr, unsigned size)
+{
+ PnvSpi *s = PNV_SPI(opaque);
+ uint32_t reg = addr >> 3;
+ uint64_t val = ~0ull;
+
+ switch (reg) {
+ case ERROR_REG:
+ case SPI_CTR_CFG_REG:
+ case CONFIG_REG1:
+ case SPI_CLK_CFG_REG:
+ case SPI_MM_REG:
+ case SPI_XMIT_DATA_REG:
+ val = s->regs[reg];
+ break;
+ case SPI_RCV_DATA_REG:
+ val = s->regs[reg];
+ trace_pnv_spi_read_RDR(val);
+ s->status = SETFIELD(SPI_STS_RDR_FULL, s->status, 0);
+ break;
+ case SPI_SEQ_OP_REG:
+ val = 0;
+ for (int i = 0; i < PNV_SPI_REG_SIZE; i++) {
+ val = (val << 8) | s->seq_op[i];
+ }
+ break;
+ case SPI_STS_REG:
+ val = s->status;
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "pnv_spi_regs: Invalid xscom "
+ "read at 0x%" PRIx32 "\n", reg);
+ }
+
+ trace_pnv_spi_read(addr, val);
+ return val;
+}
+
+static void pnv_spi_xscom_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ PnvSpi *s = PNV_SPI(opaque);
+ uint32_t reg = addr >> 3;
+
+ trace_pnv_spi_write(addr, val);
+
+ switch (reg) {
+ case ERROR_REG:
+ case SPI_CTR_CFG_REG:
+ case CONFIG_REG1:
+ case SPI_MM_REG:
+ case SPI_RCV_DATA_REG:
+ s->regs[reg] = val;
+ break;
+ case SPI_CLK_CFG_REG:
+ /*
+ * To reset the SPI controller write the sequence 0x5 0xA to
+ * reset_control field
+ */
+ if ((GETFIELD(SPI_CLK_CFG_RST_CTRL, s->regs[SPI_CLK_CFG_REG]) == 0x5)
+ && (GETFIELD(SPI_CLK_CFG_RST_CTRL, val) == 0xA)) {
+ /* SPI controller reset sequence completed, resetting */
+ s->regs[reg] = SPI_CLK_CFG_HARD_RST;
+ } else {
+ s->regs[reg] = val;
+ }
+ break;
+ case SPI_XMIT_DATA_REG:
+ /*
+ * Writing to the transmit data register causes the transmit data
+ * register full status bit in the status register to be set. Writing
+ * when the transmit data register full status bit is already set
+ * causes a "Resource Not Available" condition. This is not possible
+ * in the model since writes to this register are not asynchronous to
+ * the operation sequence like it would be in hardware.
+ */
+ s->regs[reg] = val;
+ trace_pnv_spi_write_TDR(val);
+ s->status = SETFIELD(SPI_STS_TDR_FULL, s->status, 1);
+ s->status = SETFIELD(SPI_STS_TDR_UNDERRUN, s->status, 0);
+ break;
+ case SPI_SEQ_OP_REG:
+ for (int i = 0; i < PNV_SPI_REG_SIZE; i++) {
+ s->seq_op[i] = (val >> (56 - i * 8)) & 0xFF;
+ }
+ break;
+ case SPI_STS_REG:
+ /* other fields are ignore_write */
+ s->status = SETFIELD(SPI_STS_RDR_OVERRUN, s->status,
+ GETFIELD(SPI_STS_RDR, val));
+ s->status = SETFIELD(SPI_STS_TDR_OVERRUN, s->status,
+ GETFIELD(SPI_STS_TDR, val));
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "pnv_spi_regs: Invalid xscom "
+ "write at 0x%" PRIx32 "\n", reg);
+ }
+ return;
+}
+
+static const MemoryRegionOps pnv_spi_xscom_ops = {
+ .read = pnv_spi_xscom_read,
+ .write = pnv_spi_xscom_write,
+ .valid.min_access_size = 8,
+ .valid.max_access_size = 8,
+ .impl.min_access_size = 8,
+ .impl.max_access_size = 8,
+ .endianness = DEVICE_BIG_ENDIAN,
+};
+
+static Property pnv_spi_properties[] = {
+ DEFINE_PROP_UINT32("spic_num", PnvSpi, spic_num, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void pnv_spi_realize(DeviceState *dev, Error **errp)
+{
+ PnvSpi *s = PNV_SPI(dev);
+ g_autofree char *name = g_strdup_printf(TYPE_PNV_SPI_BUS ".%d",
+ s->spic_num);
+ s->ssi_bus = ssi_create_bus(dev, name);
+ s->cs_line = g_new0(qemu_irq, 1);
+ qdev_init_gpio_out_named(DEVICE(s), s->cs_line, "cs", 1);
+
+ /* spi scoms */
+ pnv_xscom_region_init(&s->xscom_spic_regs, OBJECT(s), &pnv_spi_xscom_ops,
+ s, "xscom-spi", PNV10_XSCOM_PIB_SPIC_SIZE);
+}
+
+static int pnv_spi_dt_xscom(PnvXScomInterface *dev, void *fdt,
+ int offset)
+{
+ PnvSpi *s = PNV_SPI(dev);
+ g_autofree char *name;
+ int s_offset;
+ const char compat[] = "ibm,power10-spi";
+ uint32_t spic_pcba = PNV10_XSCOM_PIB_SPIC_BASE +
+ s->spic_num * PNV10_XSCOM_PIB_SPIC_SIZE;
+ uint32_t reg[] = {
+ cpu_to_be32(spic_pcba),
+ cpu_to_be32(PNV10_XSCOM_PIB_SPIC_SIZE)
+ };
+ name = g_strdup_printf("pnv_spi@%x", spic_pcba);
+ s_offset = fdt_add_subnode(fdt, offset, name);
+ _FDT(s_offset);
+
+ _FDT(fdt_setprop(fdt, s_offset, "reg", reg, sizeof(reg)));
+ _FDT(fdt_setprop(fdt, s_offset, "compatible", compat, sizeof(compat)));
+ _FDT((fdt_setprop_cell(fdt, s_offset, "spic_num#", s->spic_num)));
+ return 0;
+}
+
+static void pnv_spi_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PnvXScomInterfaceClass *xscomc = PNV_XSCOM_INTERFACE_CLASS(klass);
+
+ xscomc->dt_xscom = pnv_spi_dt_xscom;
+
+ dc->desc = "PowerNV SPI";
+ dc->realize = pnv_spi_realize;
+ device_class_set_props(dc, pnv_spi_properties);
+}
+
+static const TypeInfo pnv_spi_info = {
+ .name = TYPE_PNV_SPI,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(PnvSpi),
+ .class_init = pnv_spi_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { TYPE_PNV_XSCOM_INTERFACE },
+ { }
+ }
+};
+
+static void pnv_spi_register_types(void)
+{
+ type_register_static(&pnv_spi_info);
+}
+
+type_init(pnv_spi_register_types);
@@ -32,3 +32,9 @@ ibex_spi_host_reset(const char *msg) "%s"
ibex_spi_host_transfer(uint32_t tx_data, uint32_t rx_data) "tx_data: 0x%" PRIx32 " rx_data: @0x%" PRIx32
ibex_spi_host_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64
ibex_spi_host_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 " size %u:"
+
+#pnv_spi.c
+pnv_spi_read(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 0x%" PRIx64
+pnv_spi_write(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 0x%" PRIx64
+pnv_spi_read_RDR(uint64_t val) "data extracted = 0x%" PRIx64
+pnv_spi_write_TDR(uint64_t val) "being written, data written = 0x%" PRIx64
@@ -200,6 +200,9 @@ struct PnvXScomInterfaceClass {
#define PNV10_XSCOM_PEC_PCI_BASE 0x8010800 /* index goes upwards ... */
#define PNV10_XSCOM_PEC_PCI_SIZE 0x200
+#define PNV10_XSCOM_PIB_SPIC_BASE 0xc0000
+#define PNV10_XSCOM_PIB_SPIC_SIZE 0x20
+
void pnv_xscom_init(PnvChip *chip, uint64_t size, hwaddr addr);
int pnv_dt_xscom(PnvChip *chip, void *fdt, int root_offset,
uint64_t xscom_base, uint64_t xscom_size,
new file mode 100644
@@ -0,0 +1,40 @@
+/*
+ * QEMU PowerPC SPI model
+ *
+ * Copyright (c) 2024, IBM Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This model Supports a connection to a single SPI responder.
+ * Introduced for P10 to provide access to SPI seeproms, TPM, flash device
+ * and an ADC controller.
+ */
+
+#ifndef PPC_PNV_SPI_H
+#define PPC_PNV_SPI_H
+
+#include "hw/ssi/ssi.h"
+#include "hw/sysbus.h"
+
+#define TYPE_PNV_SPI "pnv-spi"
+OBJECT_DECLARE_SIMPLE_TYPE(PnvSpi, PNV_SPI)
+
+#define PNV_SPI_REG_SIZE 8
+#define PNV_SPI_REGS 7
+
+#define TYPE_PNV_SPI_BUS "pnv-spi-bus"
+typedef struct PnvSpi {
+ SysBusDevice parent_obj;
+
+ SSIBus *ssi_bus;
+ qemu_irq *cs_line;
+ MemoryRegion xscom_spic_regs;
+ /* SPI object number */
+ uint32_t spic_num;
+
+ /* SPI registers */
+ uint64_t regs[PNV_SPI_REGS];
+ uint8_t seq_op[PNV_SPI_REG_SIZE];
+ uint64_t status;
+} PnvSpi;
+#endif /* PPC_PNV_SPI_H */
new file mode 100644
@@ -0,0 +1,67 @@
+/*
+ * QEMU PowerPC SPI model
+ *
+ * Copyright (c) 2024, IBM Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef PNV_SPI_CONTROLLER_REGS_H
+#define PNV_SPI_CONTROLLER_REGS_H
+
+/*
+ * Macros from target/ppc/cpu.h
+ * These macros are copied from ppc target specific file target/ppc/cpu.h
+ * as target/ppc/cpu.h cannot be included here.
+ */
+#define PPC_BIT(bit) (0x8000000000000000ULL >> (bit))
+#define PPC_BIT8(bit) (0x80 >> (bit))
+#define PPC_BITMASK(bs, be) ((PPC_BIT(bs) - PPC_BIT(be)) | PPC_BIT(bs))
+#define PPC_BITMASK8(bs, be) ((PPC_BIT8(bs) - PPC_BIT8(be)) | PPC_BIT8(bs))
+#define MASK_TO_LSH(m) (__builtin_ffsll(m) - 1)
+#define GETFIELD(m, v) (((v) & (m)) >> MASK_TO_LSH(m))
+#define SETFIELD(m, v, val) \
+ (((v) & ~(m)) | ((((typeof(v))(val)) << MASK_TO_LSH(m)) & (m)))
+
+/* Error Register */
+#define ERROR_REG 0x00
+
+/* counter_config_reg */
+#define SPI_CTR_CFG_REG 0x01
+
+/* config_reg */
+#define CONFIG_REG1 0x02
+
+/* clock_config_reset_control_ecc_enable_reg */
+#define SPI_CLK_CFG_REG 0x03
+#define SPI_CLK_CFG_HARD_RST 0x0084000000000000;
+#define SPI_CLK_CFG_RST_CTRL PPC_BITMASK(24, 27)
+
+/* memory_mapping_reg */
+#define SPI_MM_REG 0x04
+
+/* transmit_data_reg */
+#define SPI_XMIT_DATA_REG 0x05
+
+/* receive_data_reg */
+#define SPI_RCV_DATA_REG 0x06
+
+/* sequencer_operation_reg */
+#define SPI_SEQ_OP_REG 0x07
+
+/* status_reg */
+#define SPI_STS_REG 0x08
+#define SPI_STS_RDR_FULL PPC_BIT(0)
+#define SPI_STS_RDR_OVERRUN PPC_BIT(1)
+#define SPI_STS_RDR_UNDERRUN PPC_BIT(2)
+#define SPI_STS_TDR_FULL PPC_BIT(4)
+#define SPI_STS_TDR_OVERRUN PPC_BIT(5)
+#define SPI_STS_TDR_UNDERRUN PPC_BIT(6)
+#define SPI_STS_SEQ_FSM PPC_BITMASK(8, 15)
+#define SPI_STS_SHIFTER_FSM PPC_BITMASK(16, 27)
+#define SPI_STS_SEQ_INDEX PPC_BITMASK(28, 31)
+#define SPI_STS_GEN_STATUS PPC_BITMASK(32, 63)
+#define SPI_STS_RDR PPC_BITMASK(1, 3)
+#define SPI_STS_TDR PPC_BITMASK(5, 7)
+
+#endif