From patchwork Thu Aug 15 11:42:24 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Manos Pitsidianakis X-Patchwork-Id: 13764696 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from lists.gnu.org (lists.gnu.org [209.51.188.17]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id D890FC3DA7F for ; Thu, 15 Aug 2024 11:43:48 +0000 (UTC) Received: from localhost ([::1] helo=lists1p.gnu.org) by lists.gnu.org with esmtp (Exim 4.90_1) (envelope-from ) id 1seYsw-000169-RO; Thu, 15 Aug 2024 07:43:19 -0400 Received: from eggs.gnu.org ([2001:470:142:3::10]) by lists.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1seYss-0000vD-1I for qemu-devel@nongnu.org; Thu, 15 Aug 2024 07:43:14 -0400 Received: from mail-ej1-x632.google.com ([2a00:1450:4864:20::632]) by eggs.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128) (Exim 4.90_1) (envelope-from ) id 1seYsm-0002Gh-Bj for qemu-devel@nongnu.org; Thu, 15 Aug 2024 07:43:13 -0400 Received: by mail-ej1-x632.google.com with SMTP id a640c23a62f3a-a7a83a968ddso114635866b.0 for ; Thu, 15 Aug 2024 04:43:07 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1723722187; x=1724326987; darn=nongnu.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=r+MJvaHBn1TRhLSTNk3wBRWxanw8AzIlUEDwNSkD0Dk=; b=m1wxAFgznpE6wjDgcn36bZjsxXtT6m2kk9fOJSzfsp9YQh8HzVA4zDgtzxeoYLfseS dMls8eDfbjZ6OjHzho3ihmMjdcEqPSbQ64DK6f37Xr1qG/s4MX9dbd4+W9rnrOw9OUCV 3BgfCd/yMJ4Ei12GxY6TheDOiMJpBkbr083i6c2+kvsftOD7AwJeHfyZ9sWGiiLtFx+m fQyCCGOoeg5FdEGb7gjXIsZ/1l0ZohuzjLU98lJw0e+01s/FHH9MX6R1Hw6E9KEaJAzo tPwdonlRX47ntUt8F4jF5a8ARlBICLaOGLAhj//1+853Kf8VDpqYUkf100bpDpv3PBdn 4Ieg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1723722187; x=1724326987; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=r+MJvaHBn1TRhLSTNk3wBRWxanw8AzIlUEDwNSkD0Dk=; b=uy+TBWVcRQOjQjRfhj3l02Ss7E2NQIrcRTVqS7vYCrdU2vGfMx34QaSglULfxLiljG TJHwfAm1uSSknJS760tmFJGhw1M0O5Kf61iUHhQLbW2YuuUZyohg/olnskeAyx2KzED2 vZxyS8JVS6WXWmzHN1BOXYmOKxvvGRdw2W6eW0VI4Cuv4c/wdxg5PLP5zZgjgewEaVKR i/BlWc4X3xNeb3RFDBp8fuKTOLPOkzHmMXbO1/5EIybu6K5W1tnaZgJ/9MjZ+mC5dmra RPvrIekQloaGeMRDkvPrQ0KSY8Kbc7ieNhfHmX6Skc1Nk1txoMDZyQJ+bcJg5KHyR02B LFlA== X-Gm-Message-State: AOJu0Yw6JrqnerryekvZSzKIimX3VUMVWXHkfMlOBtOiAc2logV/Loea MJ3sMCcLfFmmAxw9r3kNuTWffjRoqQcyU4pxTbQbVZFj2nhW5sycG3YJ0ZSqDsU= X-Google-Smtp-Source: AGHT+IH/NPhX40mf+xvlz88rONZP/5FSs/zbF4NHev0hFpDTs21mfBwVQH81drbq76FcOm6Dkd6XHg== X-Received: by 2002:a17:907:f75d:b0:a75:1069:5b94 with SMTP id a640c23a62f3a-a8366c323a9mr409542266b.21.1723722186408; Thu, 15 Aug 2024 04:43:06 -0700 (PDT) Received: from [127.0.1.1] (adsl-26.37.6.162.tellas.gr. [37.6.162.26]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a83838c6bf1sm89547966b.21.2024.08.15.04.43.01 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 15 Aug 2024 04:43:06 -0700 (PDT) From: Manos Pitsidianakis Date: Thu, 15 Aug 2024 14:42:24 +0300 Subject: [PATCH v7 7/7] rust: add PL011 device model MIME-Version: 1.0 Message-Id: <20240815-rust-pl011-v7-7-975135e98831@linaro.org> References: <20240815-rust-pl011-v7-0-975135e98831@linaro.org> In-Reply-To: <20240815-rust-pl011-v7-0-975135e98831@linaro.org> To: qemu-devel@nongnu.org Cc: Paolo Bonzini , =?utf-8?q?Marc-Andr=C3=A9_Lureau?= , =?utf-8?q?Daniel_P=2E_Berrang=C3=A9?= , Thomas Huth , =?utf-8?q?Philippe_Mathieu-Daud=C3=A9?= , John Snow , Cleber Rosa , Beraldo Leal , =?utf-8?q?Alex_Benn=C3=A9e?= , Wainer dos Santos Moschetta , Manos Pitsidianakis , Zhao Liu , Peter Maydell , ARM TCG CPUs , Stefan Hajnoczi , Junjie Mao , Pierrick Bouvier , Richard Henderson , Gustavo Romero , rowan.hart@intel.com, Mads Ynddal , Markus Armbruster X-Mailer: b4 0.14.1 X-Developer-Signature: v=1; a=openpgp-sha256; l=86402; i=manos.pitsidianakis@linaro.org; h=from:subject:message-id; bh=qbSC1it1ERrzQ/GX+VPmsQzQd7pYmIITOI7wxrZbSTo=; b=LS0tLS1CRUdJTiBQR1AgTUVTU0FHRS0tLS0tCgpvd0VCYlFLUy9aQU5Bd0FLQVhjcHgzQi9mZ 25RQWNzbVlnQm12ZW11U0tWeUhVR1FoTFdNUTBhS3dnS1Ercnl6CjBjVDk3U1pCYVhjYVZQTjhN QW1KQWpNRUFBRUtBQjBXSVFUTVhCdE9SS0JXODRkd0hSQjNLY2R3ZjM0SjBBVUMKWnIzcHJnQUt DUkIzS2Nkd2YzNEowSytNRC93S2RSb1ZTL3RwZXROUTdGZ08vYVZtZGJ5U3RzQ2hZQUVHNVNKcw ovdSt2ck9IcklsaFpBQzg2M29sSk5YRHZHYXJaR0lyMTFRZVI4L1kwbzczWHFRN0VjTnQ2UHJLT VMrdEEzY2ZUClJCVWhlYVhLVGMwTi9oK25seFRmSXhuY1djK0FUbGNzbE1WdXBKWjQrMzVlaDgx U0NJQWFOTlMvNE5Jc05Jb0wKcWFLSmVJSndVUzg2UWFMdFlqSWJvMlBTaUM1TGZmMnU4dXd0OVh HNVZoYlhyT3AvR3ZIWXpIV1lsYVovMW1PcQpBT2tkSDlrc3R6RFY5QXJxZmNvZVZKZFU3SGJjc1 QrUGRwT1BqTUljbFNwM1FZN3hNaFFibldzVlBaL2hHNzNRCjBiWWpNRlZPeGNDWFZod0M5dE9Qb Gp6SnY5d3pjU1lKWHJyRWczYWl1N3ltVTZqeUd0N1h2bmxMWElGekt0b2wKenpSQlA5ZTUwVGk5 clFLdVJySk5nZ0lVRzBUVTJjNHN6NzN6Q1hwd2ZPbXNCUHZqKytMYUZ4L3Uzb2lyNFJGaAp5NFR pdWkxa2pYSjJTcm5ZNXdHb1Awa280eUYxdkxYaVBGRXh2U2w1c3VnZUNMNnlPVldPQjFBaXpGcV hPQVAvCjZncEx4NXA1MDd6Y0kzajlzYVkxak03RkY0ayt0UHFubDJKRmxxcTNPTlZpNDdhRWFtU UdlTi9wRXpXTENBWFQKM041MjFrUE8vL1BLWjBscElmcXE4RXFCQ3RzWmJZbnUvNXdrNmQ2UEp5 YW1Hd2xxbDBJOFNmbWphU3liY2dLNApRZUNWVzZESVp4M3lOMkUzTGhrYzh3WUlpcDB4NzNrakJ FOUI2c3NucXp3SkYxaUdSMWxTUlBpR1R0S3J6ZjRtCldpeWQzQT09Cj16bmNtCi0tLS0tRU5EIF BHUCBNRVNTQUdFLS0tLS0K X-Developer-Key: i=manos.pitsidianakis@linaro.org; a=openpgp; fpr=7C721DF9DB3CC7182311C0BF68BC211D47B421E1 Received-SPF: pass client-ip=2a00:1450:4864:20::632; envelope-from=manos.pitsidianakis@linaro.org; helo=mail-ej1-x632.google.com X-Spam_score_int: -20 X-Spam_score: -2.1 X-Spam_bar: -- X-Spam_report: (-2.1 / 5.0 requ) BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, DKIM_VALID_EF=-0.1, RCVD_IN_DNSWL_NONE=-0.0001, SPF_HELO_NONE=0.001, SPF_PASS=-0.001, T_SCC_BODY_TEXT_LINE=-0.01 autolearn=ham autolearn_force=no X-Spam_action: no action X-BeenThere: qemu-devel@nongnu.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: qemu-devel-bounces+qemu-devel=archiver.kernel.org@nongnu.org Sender: qemu-devel-bounces+qemu-devel=archiver.kernel.org@nongnu.org This commit adds a re-implementation of hw/char/pl011.c in Rust. How to build: 1. Configure a QEMU build with: --enable-system --target-list=aarch64-softmmu --enable-rust 2. Launching a VM with qemu-system-aarch64 should use the Rust version of the pl011 device Co-authored-by: Junjie Mao Co-authored-by: Paolo Bonzini Signed-off-by: Junjie Mao Signed-off-by: Paolo Bonzini Signed-off-by: Manos Pitsidianakis --- MAINTAINERS | 5 + hw/arm/Kconfig | 33 +- rust/Kconfig | 1 + rust/hw/Kconfig | 2 + rust/hw/char/Kconfig | 3 + rust/hw/char/meson.build | 1 + rust/hw/char/pl011/.gitignore | 2 + rust/hw/char/pl011/Cargo.lock | 125 +++++ rust/hw/char/pl011/Cargo.toml | 26 + rust/hw/char/pl011/README.md | 31 ++ rust/hw/char/pl011/meson.build | 21 + rust/hw/char/pl011/rustfmt.toml | 1 + rust/hw/char/pl011/src/definitions.rs | 26 + rust/hw/char/pl011/src/device.rs | 586 +++++++++++++++++++++ rust/hw/char/pl011/src/device_class.rs | 58 ++ rust/hw/char/pl011/src/lib.rs | 584 ++++++++++++++++++++ rust/hw/char/pl011/src/memory_ops.rs | 56 ++ rust/hw/meson.build | 1 + rust/meson.build | 2 + scripts/archive-source.sh | 5 +- scripts/make-release | 5 +- subprojects/.gitignore | 11 + subprojects/arbitrary-int-1-rs.wrap | 7 + subprojects/bilge-0.2-rs.wrap | 7 + subprojects/bilge-impl-0.2-rs.wrap | 7 + subprojects/either-1-rs.wrap | 7 + subprojects/itertools-0.11-rs.wrap | 7 + .../packagefiles/arbitrary-int-1-rs/meson.build | 19 + subprojects/packagefiles/bilge-0.2-rs/meson.build | 29 + .../packagefiles/bilge-impl-0.2-rs/meson.build | 45 ++ subprojects/packagefiles/either-1-rs/meson.build | 24 + .../packagefiles/itertools-0.11-rs/meson.build | 30 ++ .../packagefiles/proc-macro-error-1-rs/meson.build | 40 ++ .../proc-macro-error-attr-1-rs/meson.build | 32 ++ .../packagefiles/proc-macro2-1-rs/meson.build | 31 ++ subprojects/packagefiles/quote-1-rs/meson.build | 29 + subprojects/packagefiles/syn-2-rs/meson.build | 40 ++ .../packagefiles/unicode-ident-1-rs/meson.build | 20 + subprojects/proc-macro-error-1-rs.wrap | 7 + subprojects/proc-macro-error-attr-1-rs.wrap | 7 + subprojects/proc-macro2-1-rs.wrap | 7 + subprojects/quote-1-rs.wrap | 7 + subprojects/syn-2-rs.wrap | 7 + subprojects/unicode-ident-1-rs.wrap | 7 + 44 files changed, 1988 insertions(+), 13 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 56a88048d2..604543b303 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1189,6 +1189,11 @@ F: include/hw/*/microbit*.h F: tests/qtest/microbit-test.c F: docs/system/arm/nrf.rst +ARM PL011 Rust device +M: Manos Pitsidianakis +S: Maintained +F: rust/hw/char/pl011/ + AVR Machines ------------- diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index 1ad60da7aa..45438c1bc4 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -20,7 +20,8 @@ config ARM_VIRT select PCI_EXPRESS select PCI_EXPRESS_GENERIC_BRIDGE select PFLASH_CFI01 - select PL011 # UART + select PL011 if !HAVE_RUST # UART + select X_PL011_RUST if HAVE_RUST # UART select PL031 # RTC select PL061 # GPIO select GPIO_PWR @@ -80,7 +81,8 @@ config HIGHBANK select AHCI select ARM_TIMER # sp804 select ARM_V7M - select PL011 # UART + select PL011 if !HAVE_RUST # UART + select X_PL011_RUST if HAVE_RUST # UART select PL022 # SPI select PL031 # RTC select PL061 # GPIO @@ -93,7 +95,8 @@ config INTEGRATOR depends on TCG && ARM select ARM_TIMER select INTEGRATOR_DEBUG - select PL011 # UART + select PL011 if !HAVE_RUST # UART + select X_PL011_RUST if HAVE_RUST # UART select PL031 # RTC select PL041 # audio select PL050 # keyboard/mouse @@ -119,7 +122,8 @@ config MUSCA default y depends on TCG && ARM select ARMSSE - select PL011 + select PL011 if !HAVE_RUST # UART + select X_PL011_RUST if HAVE_RUST # UART select PL031 select SPLIT_IRQ select UNIMP @@ -228,7 +232,8 @@ config Z2 depends on TCG && ARM select PFLASH_CFI01 select WM8750 - select PL011 # UART + select PL011 if !HAVE_RUST # UART + select X_PL011_RUST if HAVE_RUST # UART select PXA2XX config REALVIEW @@ -248,7 +253,8 @@ config REALVIEW select WM8750 # audio codec select LSI_SCSI_PCI select PCI - select PL011 # UART + select PL011 if !HAVE_RUST # UART + select X_PL011_RUST if HAVE_RUST # UART select PL031 # RTC select PL041 # audio codec select PL050 # keyboard/mouse @@ -273,7 +279,8 @@ config SBSA_REF select PCI_EXPRESS select PCI_EXPRESS_GENERIC_BRIDGE select PFLASH_CFI01 - select PL011 # UART + select PL011 if !HAVE_RUST # UART + select X_PL011_RUST if HAVE_RUST # UART select PL031 # RTC select PL061 # GPIO select USB_XHCI_SYSBUS @@ -297,7 +304,8 @@ config STELLARIS select ARM_V7M select CMSDK_APB_WATCHDOG select I2C - select PL011 # UART + select PL011 if !HAVE_RUST # UART + select X_PL011_RUST if HAVE_RUST # UART select PL022 # SPI select PL061 # GPIO select SSD0303 # OLED display @@ -356,7 +364,8 @@ config VEXPRESS select ARM_TIMER # sp804 select LAN9118 select PFLASH_CFI01 - select PL011 # UART + select PL011 if !HAVE_RUST # UART + select X_PL011_RUST if HAVE_RUST # UART select PL041 # audio codec select PL181 # display select REALVIEW @@ -440,7 +449,8 @@ config RASPI default y depends on TCG && ARM select FRAMEBUFFER - select PL011 # UART + select PL011 if !HAVE_RUST # UART + select X_PL011_RUST if HAVE_RUST # UART select SDHCI select USB_DWC2 select BCM2835_SPI @@ -515,7 +525,8 @@ config XLNX_VERSAL select ARM_GIC select CPU_CLUSTER select DEVICE_TREE - select PL011 + select PL011 if !HAVE_RUST # UART + select X_PL011_RUST if HAVE_RUST # UART select CADENCE select VIRTIO_MMIO select UNIMP diff --git a/rust/Kconfig b/rust/Kconfig index e69de29bb2..f9f5c39098 100644 --- a/rust/Kconfig +++ b/rust/Kconfig @@ -0,0 +1 @@ +source hw/Kconfig diff --git a/rust/hw/Kconfig b/rust/hw/Kconfig new file mode 100644 index 0000000000..4d934f30af --- /dev/null +++ b/rust/hw/Kconfig @@ -0,0 +1,2 @@ +# devices Kconfig +source char/Kconfig diff --git a/rust/hw/char/Kconfig b/rust/hw/char/Kconfig new file mode 100644 index 0000000000..a1732a9e97 --- /dev/null +++ b/rust/hw/char/Kconfig @@ -0,0 +1,3 @@ +config X_PL011_RUST + bool + default y if HAVE_RUST diff --git a/rust/hw/char/meson.build b/rust/hw/char/meson.build new file mode 100644 index 0000000000..5716dc43ef --- /dev/null +++ b/rust/hw/char/meson.build @@ -0,0 +1 @@ +subdir('pl011') diff --git a/rust/hw/char/pl011/.gitignore b/rust/hw/char/pl011/.gitignore new file mode 100644 index 0000000000..71eaff2035 --- /dev/null +++ b/rust/hw/char/pl011/.gitignore @@ -0,0 +1,2 @@ +# Ignore generated bindings file overrides. +src/bindings.rs.inc diff --git a/rust/hw/char/pl011/Cargo.lock b/rust/hw/char/pl011/Cargo.lock new file mode 100644 index 0000000000..411bfed9c9 --- /dev/null +++ b/rust/hw/char/pl011/Cargo.lock @@ -0,0 +1,125 @@ +# This file is automatically @generated by Cargo. +# It is not intended for manual editing. +version = 3 + +[[package]] +name = "arbitrary-int" +version = "1.2.7" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "c84fc003e338a6f69fbd4f7fe9f92b535ff13e9af8997f3b14b6ddff8b1df46d" + +[[package]] +name = "bilge" +version = "0.2.0" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "dc707ed8ebf81de5cd6c7f48f54b4c8621760926cdf35a57000747c512e67b57" +dependencies = [ + "arbitrary-int", + "bilge-impl", +] + +[[package]] +name = "bilge-impl" +version = "0.2.0" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "feb11e002038ad243af39c2068c8a72bcf147acf05025dcdb916fcc000adb2d8" +dependencies = [ + "itertools", + "proc-macro-error", + "proc-macro2", + "quote", + "syn", +] + +[[package]] +name = "either" +version = "1.12.0" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "3dca9240753cf90908d7e4aac30f630662b02aebaa1b58a3cadabdb23385b58b" + +[[package]] +name = "itertools" +version = "0.11.0" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "b1c173a5686ce8bfa551b3563d0c2170bf24ca44da99c7ca4bfdab5418c3fe57" +dependencies = [ + "either", +] + +[[package]] +name = "pl011" +version = "0.1.0" +dependencies = [ + "arbitrary-int", + "bilge", + "bilge-impl", + "qemu_api", +] + +[[package]] +name = "proc-macro-error" +version = "1.0.4" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "da25490ff9892aab3fcf7c36f08cfb902dd3e71ca0f9f9517bea02a73a5ce38c" +dependencies = [ + "proc-macro-error-attr", + "proc-macro2", + "quote", + "version_check", +] + +[[package]] +name = "proc-macro-error-attr" +version = "1.0.4" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "a1be40180e52ecc98ad80b184934baf3d0d29f979574e439af5a55274b35f869" +dependencies = [ + "proc-macro2", + "quote", + "version_check", +] + +[[package]] +name = "proc-macro2" +version = "1.0.84" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "ec96c6a92621310b51366f1e28d05ef11489516e93be030060e5fc12024a49d6" +dependencies = [ + "unicode-ident", +] + +[[package]] +name = "qemu_api" +version = "0.1.0" + +[[package]] +name = "quote" +version = "1.0.36" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "0fa76aaf39101c457836aec0ce2316dbdc3ab723cdda1c6bd4e6ad4208acaca7" +dependencies = [ + "proc-macro2", +] + +[[package]] +name = "syn" +version = "2.0.66" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "c42f3f41a2de00b01c0aaad383c5a45241efc8b2d1eda5661812fda5f3cdcff5" +dependencies = [ + "proc-macro2", + "quote", + "unicode-ident", +] + +[[package]] +name = "unicode-ident" +version = "1.0.12" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "3354b9ac3fae1ff6755cb6db53683adb661634f67557942dea4facebec0fee4b" + +[[package]] +name = "version_check" +version = "0.9.4" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "49874b5167b65d7193b8aba1567f5c7d93d001cafc34600cee003eda787e483f" diff --git a/rust/hw/char/pl011/Cargo.toml b/rust/hw/char/pl011/Cargo.toml new file mode 100644 index 0000000000..67a6973da6 --- /dev/null +++ b/rust/hw/char/pl011/Cargo.toml @@ -0,0 +1,26 @@ +[package] +name = "pl011" +version = "0.1.0" +edition = "2021" +authors = ["Manos Pitsidianakis "] +license = "GPL-2.0 OR GPL-3.0-or-later" +readme = "README.md" +homepage = "https://www.qemu.org" +description = "pl011 device model for QEMU" +repository = "https://gitlab.com/epilys/rust-for-qemu" +resolver = "2" +publish = false +keywords = [] +categories = [] + +[lib] +crate-type = ["staticlib"] + +[dependencies] +arbitrary-int = { version = "1.2.7" } +bilge = { version = "0.2.0" } +bilge-impl = { version = "0.2.0" } +qemu_api = { path = "../../../qemu-api" } + +# Do not include in any global workspace +[workspace] diff --git a/rust/hw/char/pl011/README.md b/rust/hw/char/pl011/README.md new file mode 100644 index 0000000000..cd7dea3163 --- /dev/null +++ b/rust/hw/char/pl011/README.md @@ -0,0 +1,31 @@ +# PL011 QEMU Device Model + +This library implements a device model for the PrimeCell® UART (PL011) +device in QEMU. + +## Build static lib + +Host build target must be explicitly specified: + +```sh +cargo build --target x86_64-unknown-linux-gnu +``` + +Replace host target triplet if necessary. + +## Generate Rust documentation + +To generate docs for this crate, including private items: + +```sh +cargo doc --no-deps --document-private-items --target x86_64-unknown-linux-gnu +``` + +To include direct dependencies like `bilge` (bitmaps for register types): + +```sh +cargo tree --depth 1 -e normal --prefix none \ + | cut -d' ' -f1 \ + | xargs printf -- '-p %s\n' \ + | xargs cargo doc --no-deps --document-private-items --target x86_64-unknown-linux-gnu +``` diff --git a/rust/hw/char/pl011/meson.build b/rust/hw/char/pl011/meson.build new file mode 100644 index 0000000000..518d4924a9 --- /dev/null +++ b/rust/hw/char/pl011/meson.build @@ -0,0 +1,21 @@ +subproject('bilge-0.2-rs', required: true) +subproject('bilge-impl-0.2-rs', required: true) + +bilge_dep = dependency('bilge-0.2-rs') +bilge_impl_dep = dependency('bilge-impl-0.2-rs') + +_libpl011_rs = static_library( + 'pl011', + files('src/lib.rs'), + override_options: ['rust_std=2021', 'build.rust_std=2021'], + rust_abi: 'c', + dependencies: [ + bilge_dep, + bilge_impl_dep, + qemu_api, + ], +) + +specific_ss.add(when: 'CONFIG_X_PL011_RUST', if_true: [declare_dependency( + link_whole: [_libpl011_rs], +)]) diff --git a/rust/hw/char/pl011/rustfmt.toml b/rust/hw/char/pl011/rustfmt.toml new file mode 120000 index 0000000000..39f97b043b --- /dev/null +++ b/rust/hw/char/pl011/rustfmt.toml @@ -0,0 +1 @@ +../rustfmt.toml \ No newline at end of file diff --git a/rust/hw/char/pl011/src/definitions.rs b/rust/hw/char/pl011/src/definitions.rs new file mode 100644 index 0000000000..66070559d4 --- /dev/null +++ b/rust/hw/char/pl011/src/definitions.rs @@ -0,0 +1,26 @@ +// Copyright 2024 Manos Pitsidianakis +// SPDX-License-Identifier: GPL-2.0 OR GPL-3.0-or-later + +//! Definitions required by QEMU when registering the device. + +use core::mem::MaybeUninit; + +use qemu_api::bindings::*; + +use crate::device::PL011State; +use qemu_api::definitions::ObjectImpl; + +pub const TYPE_PL011: &std::ffi::CStr = c"pl011"; + +#[used] +pub static VMSTATE_PL011: VMStateDescription = VMStateDescription { + name: PL011State::TYPE_INFO.name, + unmigratable: true, + ..unsafe { MaybeUninit::::zeroed().assume_init() } +}; + +qemu_api::module_init! { + qom: register_type => { + type_register_static(&PL011State::TYPE_INFO); + } +} diff --git a/rust/hw/char/pl011/src/device.rs b/rust/hw/char/pl011/src/device.rs new file mode 100644 index 0000000000..150787f70c --- /dev/null +++ b/rust/hw/char/pl011/src/device.rs @@ -0,0 +1,586 @@ +// Copyright 2024 Manos Pitsidianakis +// SPDX-License-Identifier: GPL-2.0 OR GPL-3.0-or-later + +use crate::{ + memory_ops::PL011_OPS, + registers::{self, Interrupt}, + RegisterOffset, +}; +use core::{ + ffi::{c_int, c_uchar, c_uint, c_void, CStr}, + ptr::{addr_of, addr_of_mut, NonNull}, +}; +use qemu_api::bindings::{self, *}; +use qemu_api::definitions::ObjectImpl; + +static PL011_ID_ARM: [c_uchar; 8] = [0x11, 0x10, 0x14, 0x00, 0x0d, 0xf0, 0x05, 0xb1]; + +const DATA_BREAK: u32 = 1 << 10; + +/// QEMU sourced constant. +pub const PL011_FIFO_DEPTH: usize = 16_usize; + +#[repr(C)] +#[derive(Debug)] +/// PL011 Device Model in QEMU +pub struct PL011State { + pub parent_obj: SysBusDevice, + pub iomem: MemoryRegion, + pub readbuff: u32, + #[doc(alias = "fr")] + pub flags: registers::Flags, + #[doc(alias = "lcr")] + pub line_control: registers::LineControl, + #[doc(alias = "rsr")] + pub receive_status_error_clear: registers::ReceiveStatusErrorClear, + #[doc(alias = "cr")] + pub control: registers::Control, + pub dmacr: u32, + pub int_enabled: u32, + pub int_level: u32, + pub read_fifo: [u32; PL011_FIFO_DEPTH], + pub ilpr: u32, + pub ibrd: u32, + pub fbrd: u32, + pub ifl: u32, + pub read_pos: usize, + pub read_count: usize, + pub read_trigger: usize, + #[doc(alias = "chr")] + pub char_backend: CharBackend, + /// QEMU interrupts + /// + /// ```text + /// * sysbus MMIO region 0: device registers + /// * sysbus IRQ 0: `UARTINTR` (combined interrupt line) + /// * sysbus IRQ 1: `UARTRXINTR` (receive FIFO interrupt line) + /// * sysbus IRQ 2: `UARTTXINTR` (transmit FIFO interrupt line) + /// * sysbus IRQ 3: `UARTRTINTR` (receive timeout interrupt line) + /// * sysbus IRQ 4: `UARTMSINTR` (momem status interrupt line) + /// * sysbus IRQ 5: `UARTEINTR` (error interrupt line) + /// ``` + #[doc(alias = "irq")] + pub interrupts: [qemu_irq; 6usize], + #[doc(alias = "clk")] + pub clock: NonNull, + #[doc(alias = "migrate_clk")] + pub migrate_clock: bool, +} + +impl ObjectImpl for PL011State { + type Class = PL011Class; + const TYPE_INFO: qemu_api::bindings::TypeInfo = qemu_api::type_info! { PL011State }; + const TYPE_NAME: &'static CStr = c"pl011"; + const PARENT_TYPE_NAME: Option<&'static CStr> = Some(TYPE_SYS_BUS_DEVICE); + const ABSTRACT: bool = false; + const INSTANCE_INIT: Option = Some(pl011_init); + const INSTANCE_POST_INIT: Option = None; + const INSTANCE_FINALIZE: Option = None; +} + +#[repr(C)] +pub struct PL011Class { + _inner: [u8; 0], +} + +impl qemu_api::definitions::Class for PL011Class { + const CLASS_INIT: Option< + unsafe extern "C" fn(klass: *mut ObjectClass, data: *mut core::ffi::c_void), + > = Some(crate::device_class::pl011_class_init); + const CLASS_BASE_INIT: Option< + unsafe extern "C" fn(klass: *mut ObjectClass, data: *mut core::ffi::c_void), + > = None; +} + +#[used] +pub static CLK_NAME: &CStr = c"clk"; + +impl PL011State { + pub fn init(&mut self) { + let dev = addr_of_mut!(*self).cast::(); + // SAFETY: + // + // self and self.iomem are guaranteed to be valid at this point since callers + // must make sure the `self` reference is valid. + unsafe { + memory_region_init_io( + addr_of_mut!(self.iomem), + addr_of_mut!(*self).cast::(), + &PL011_OPS, + addr_of_mut!(*self).cast::(), + Self::TYPE_INFO.name, + 0x1000, + ); + let sbd = addr_of_mut!(*self).cast::(); + sysbus_init_mmio(sbd, addr_of_mut!(self.iomem)); + for irq in self.interrupts.iter_mut() { + sysbus_init_irq(sbd, irq); + } + } + // SAFETY: + // + // self.clock is not initialized at this point; but since `NonNull<_>` is Copy, we can + // overwrite the undefined value without side effects. This is safe since all PL011State + // instances are created by QOM code which calls this function to initialize the fields; + // therefore no code is able to access an invalid self.clock value. + unsafe { + self.clock = NonNull::new(qdev_init_clock_in( + dev, + CLK_NAME.as_ptr(), + None, /* pl011_clock_update */ + addr_of_mut!(*self).cast::(), + ClockEvent_ClockUpdate, + )) + .unwrap(); + } + } + + pub fn read( + &mut self, + offset: hwaddr, + _size: core::ffi::c_uint, + ) -> std::ops::ControlFlow { + use RegisterOffset::*; + + std::ops::ControlFlow::Break(match RegisterOffset::try_from(offset) { + Err(v) if (0x3f8..0x400).contains(&v) => { + u64::from(PL011_ID_ARM[((offset - 0xfe0) >> 2) as usize]) + } + Err(_) => { + // qemu_log_mask(LOG_GUEST_ERROR, "pl011_read: Bad offset 0x%x\n", (int)offset); + 0 + } + Ok(DR) => { + // s->flags &= ~PL011_FLAG_RXFF; + self.flags.set_receive_fifo_full(false); + let c = self.read_fifo[self.read_pos]; + if self.read_count > 0 { + self.read_count -= 1; + self.read_pos = (self.read_pos + 1) & (self.fifo_depth() - 1); + } + if self.read_count == 0 { + // self.flags |= PL011_FLAG_RXFE; + self.flags.set_receive_fifo_empty(true); + } + if self.read_count + 1 == self.read_trigger { + //self.int_level &= ~ INT_RX; + self.int_level &= !registers::INT_RX; + } + // Update error bits. + self.receive_status_error_clear = c.to_be_bytes()[3].into(); + self.update(); + // Must call qemu_chr_fe_accept_input, so return Continue: + return std::ops::ControlFlow::Continue(c.into()); + } + Ok(RSR) => u8::from(self.receive_status_error_clear).into(), + Ok(FR) => u16::from(self.flags).into(), + Ok(FBRD) => self.fbrd.into(), + Ok(ILPR) => self.ilpr.into(), + Ok(IBRD) => self.ibrd.into(), + Ok(LCR_H) => u16::from(self.line_control).into(), + Ok(CR) => { + // We exercise our self-control. + u16::from(self.control).into() + } + Ok(FLS) => self.ifl.into(), + Ok(IMSC) => self.int_enabled.into(), + Ok(RIS) => self.int_level.into(), + Ok(MIS) => u64::from(self.int_level & self.int_enabled), + Ok(ICR) => { + // "The UARTICR Register is the interrupt clear register and is write-only" + // Source: ARM DDI 0183G 3.3.13 Interrupt Clear Register, UARTICR + 0 + } + Ok(DMACR) => self.dmacr.into(), + }) + } + + pub fn write(&mut self, offset: hwaddr, value: u64) { + // eprintln!("write offset {offset} value {value}"); + use RegisterOffset::*; + let value: u32 = value as u32; + match RegisterOffset::try_from(offset) { + Err(_bad_offset) => { + eprintln!("write bad offset {offset} value {value}"); + } + Ok(DR) => { + // ??? Check if transmitter is enabled. + let ch: u8 = value as u8; + // XXX this blocks entire thread. Rewrite to use + // qemu_chr_fe_write and background I/O callbacks + + // SAFETY: self.char_backend is a valid CharBackend instance after it's been + // initialized in realize(). + unsafe { + qemu_chr_fe_write_all(addr_of_mut!(self.char_backend), &ch, 1); + } + self.loopback_tx(value); + self.int_level |= registers::INT_TX; + self.update(); + } + Ok(RSR) => { + self.receive_status_error_clear = 0.into(); + } + Ok(FR) => { + // flag writes are ignored + } + Ok(ILPR) => { + self.ilpr = value; + } + Ok(IBRD) => { + self.ibrd = value; + } + Ok(FBRD) => { + self.fbrd = value; + } + Ok(LCR_H) => { + let value = value as u16; + let new_val: registers::LineControl = value.into(); + // Reset the FIFO state on FIFO enable or disable + if bool::from(self.line_control.fifos_enabled()) + ^ bool::from(new_val.fifos_enabled()) + { + self.reset_fifo(); + } + if self.line_control.send_break() ^ new_val.send_break() { + let mut break_enable: c_int = new_val.send_break().into(); + // SAFETY: self.char_backend is a valid CharBackend instance after it's been + // initialized in realize(). + unsafe { + qemu_chr_fe_ioctl( + addr_of_mut!(self.char_backend), + CHR_IOCTL_SERIAL_SET_BREAK as i32, + addr_of_mut!(break_enable).cast::(), + ); + } + self.loopback_break(break_enable > 0); + } + self.line_control = new_val; + self.set_read_trigger(); + } + Ok(CR) => { + // ??? Need to implement the enable bit. + let value = value as u16; + self.control = value.into(); + self.loopback_mdmctrl(); + } + Ok(FLS) => { + self.ifl = value; + self.set_read_trigger(); + } + Ok(IMSC) => { + self.int_enabled = value; + self.update(); + } + Ok(RIS) => {} + Ok(MIS) => {} + Ok(ICR) => { + self.int_level &= !value; + self.update(); + } + Ok(DMACR) => { + self.dmacr = value; + if value & 3 > 0 { + // qemu_log_mask(LOG_UNIMP, "pl011: DMA not implemented\n"); + eprintln!("pl011: DMA not implemented"); + } + } + } + } + + #[inline] + fn loopback_tx(&mut self, value: u32) { + if !self.loopback_enabled() { + return; + } + + // Caveat: + // + // In real hardware, TX loopback happens at the serial-bit level + // and then reassembled by the RX logics back into bytes and placed + // into the RX fifo. That is, loopback happens after TX fifo. + // + // Because the real hardware TX fifo is time-drained at the frame + // rate governed by the configured serial format, some loopback + // bytes in TX fifo may still be able to get into the RX fifo + // that could be full at times while being drained at software + // pace. + // + // In such scenario, the RX draining pace is the major factor + // deciding which loopback bytes get into the RX fifo, unless + // hardware flow-control is enabled. + // + // For simplicity, the above described is not emulated. + self.put_fifo(value); + } + + fn loopback_mdmctrl(&mut self) { + if !self.loopback_enabled() { + return; + } + + /* + * Loopback software-driven modem control outputs to modem status inputs: + * FR.RI <= CR.Out2 + * FR.DCD <= CR.Out1 + * FR.CTS <= CR.RTS + * FR.DSR <= CR.DTR + * + * The loopback happens immediately even if this call is triggered + * by setting only CR.LBE. + * + * CTS/RTS updates due to enabled hardware flow controls are not + * dealt with here. + */ + + //fr = s->flags & ~(PL011_FLAG_RI | PL011_FLAG_DCD | + // PL011_FLAG_DSR | PL011_FLAG_CTS); + //fr |= (cr & CR_OUT2) ? PL011_FLAG_RI : 0; + //fr |= (cr & CR_OUT1) ? PL011_FLAG_DCD : 0; + //fr |= (cr & CR_RTS) ? PL011_FLAG_CTS : 0; + //fr |= (cr & CR_DTR) ? PL011_FLAG_DSR : 0; + // + self.flags.set_ring_indicator(self.control.out_2()); + self.flags.set_data_carrier_detect(self.control.out_1()); + self.flags.set_clear_to_send(self.control.request_to_send()); + self.flags + .set_data_set_ready(self.control.data_transmit_ready()); + + // Change interrupts based on updated FR + let mut il = self.int_level; + + il &= !Interrupt::MS; + //il |= (fr & PL011_FLAG_DSR) ? INT_DSR : 0; + //il |= (fr & PL011_FLAG_DCD) ? INT_DCD : 0; + //il |= (fr & PL011_FLAG_CTS) ? INT_CTS : 0; + //il |= (fr & PL011_FLAG_RI) ? INT_RI : 0; + + if self.flags.data_set_ready() { + il |= Interrupt::DSR as u32; + } + if self.flags.data_carrier_detect() { + il |= Interrupt::DCD as u32; + } + if self.flags.clear_to_send() { + il |= Interrupt::CTS as u32; + } + if self.flags.ring_indicator() { + il |= Interrupt::RI as u32; + } + self.int_level = il; + self.update(); + } + + fn loopback_break(&mut self, enable: bool) { + if enable { + self.loopback_tx(DATA_BREAK); + } + } + + fn set_read_trigger(&mut self) { + //#if 0 + // /* The docs say the RX interrupt is triggered when the FIFO exceeds + // the threshold. However linux only reads the FIFO in response to an + // interrupt. Triggering the interrupt when the FIFO is non-empty seems + // to make things work. */ + // if (s->lcr & LCR_FEN) + // s->read_trigger = (s->ifl >> 1) & 0x1c; + // else + //#endif + self.read_trigger = 1; + } + + pub fn realize(&mut self) { + // SAFETY: self.char_backend has the correct size and alignment for a + // CharBackend object, and its callbacks are of the correct types. + unsafe { + qemu_chr_fe_set_handlers( + addr_of_mut!(self.char_backend), + Some(pl011_can_receive), + Some(pl011_receive), + Some(pl011_event), + None, + addr_of_mut!(*self).cast::(), + core::ptr::null_mut(), + true, + ); + } + } + + pub fn reset(&mut self) { + self.line_control.reset(); + self.receive_status_error_clear.reset(); + self.dmacr = 0; + self.int_enabled = 0; + self.int_level = 0; + self.ilpr = 0; + self.ibrd = 0; + self.fbrd = 0; + self.read_trigger = 1; + self.ifl = 0x12; + self.control.reset(); + self.flags = 0.into(); + self.reset_fifo(); + } + + pub fn reset_fifo(&mut self) { + self.read_count = 0; + self.read_pos = 0; + + /* Reset FIFO flags */ + self.flags.reset(); + } + + pub fn can_receive(&self) -> bool { + // trace_pl011_can_receive(s->lcr, s->read_count, r); + self.read_count < self.fifo_depth() + } + + pub fn event(&mut self, event: QEMUChrEvent) { + if event == bindings::QEMUChrEvent_CHR_EVENT_BREAK && !self.fifo_enabled() { + self.put_fifo(DATA_BREAK); + self.receive_status_error_clear.set_break_error(true); + } + } + + #[inline] + pub fn fifo_enabled(&self) -> bool { + matches!(self.line_control.fifos_enabled(), registers::Mode::FIFO) + } + + #[inline] + pub fn loopback_enabled(&self) -> bool { + self.control.enable_loopback() + } + + #[inline] + pub fn fifo_depth(&self) -> usize { + // Note: FIFO depth is expected to be power-of-2 + if self.fifo_enabled() { + return PL011_FIFO_DEPTH; + } + 1 + } + + pub fn put_fifo(&mut self, value: c_uint) { + let depth = self.fifo_depth(); + assert!(depth > 0); + let slot = (self.read_pos + self.read_count) & (depth - 1); + self.read_fifo[slot] = value; + self.read_count += 1; + // s->flags &= ~PL011_FLAG_RXFE; + self.flags.set_receive_fifo_empty(false); + if self.read_count == depth { + //s->flags |= PL011_FLAG_RXFF; + self.flags.set_receive_fifo_full(true); + } + + if self.read_count == self.read_trigger { + self.int_level |= registers::INT_RX; + self.update(); + } + } + + pub fn update(&mut self) { + let flags = self.int_level & self.int_enabled; + for (irq, i) in self.interrupts.iter().zip(IRQMASK) { + // SAFETY: self.interrupts have been initialized in init(). + unsafe { qemu_set_irq(*irq, i32::from(flags & i != 0)) }; + } + } +} + +/// Which bits in the interrupt status matter for each outbound IRQ line ? +pub const IRQMASK: [u32; 6] = [ + /* combined IRQ */ + Interrupt::E + | Interrupt::MS + | Interrupt::RT as u32 + | Interrupt::TX as u32 + | Interrupt::RX as u32, + Interrupt::RX as u32, + Interrupt::TX as u32, + Interrupt::RT as u32, + Interrupt::MS, + Interrupt::E, +]; + +/// # Safety +/// +/// We expect the FFI user of this function to pass a valid pointer, that has +/// the same size as [`PL011State`]. We also expect the device is +/// readable/writeable from one thread at any time. +#[no_mangle] +pub unsafe extern "C" fn pl011_can_receive(opaque: *mut c_void) -> c_int { + assert!(!opaque.is_null()); + let state = NonNull::new_unchecked(opaque.cast::()); + state.as_ref().can_receive().into() +} + +/// # Safety +/// +/// We expect the FFI user of this function to pass a valid pointer, that has +/// the same size as [`PL011State`]. We also expect the device is +/// readable/writeable from one thread at any time. +/// +/// The buffer and size arguments must also be valid. +#[no_mangle] +pub unsafe extern "C" fn pl011_receive( + opaque: *mut core::ffi::c_void, + buf: *const u8, + size: core::ffi::c_int, +) { + assert!(!opaque.is_null()); + let mut state = NonNull::new_unchecked(opaque.cast::()); + if state.as_ref().loopback_enabled() { + return; + } + if size > 0 { + assert!(!buf.is_null()); + state.as_mut().put_fifo(*buf.cast::()) + } +} + +/// # Safety +/// +/// We expect the FFI user of this function to pass a valid pointer, that has +/// the same size as [`PL011State`]. We also expect the device is +/// readable/writeable from one thread at any time. +#[no_mangle] +pub unsafe extern "C" fn pl011_event(opaque: *mut core::ffi::c_void, event: QEMUChrEvent) { + assert!(!opaque.is_null()); + let mut state = NonNull::new_unchecked(opaque.cast::()); + state.as_mut().event(event) +} + +/// # Safety +/// +/// We expect the FFI user of this function to pass a valid pointer for `chr`. +#[no_mangle] +pub unsafe extern "C" fn pl011_create( + addr: u64, + irq: qemu_irq, + chr: *mut Chardev, +) -> *mut DeviceState { + let dev: *mut DeviceState = unsafe { qdev_new(PL011State::TYPE_INFO.name) }; + assert!(!dev.is_null()); + let sysbus: *mut SysBusDevice = dev as *mut SysBusDevice; + + qdev_prop_set_chr(dev, bindings::TYPE_CHARDEV.as_ptr(), chr); + sysbus_realize_and_unref(sysbus, addr_of!(error_fatal) as *mut *mut Error); + sysbus_mmio_map(sysbus, 0, addr); + sysbus_connect_irq(sysbus, 0, irq); + dev +} + +/// # Safety +/// +/// We expect the FFI user of this function to pass a valid pointer, that has +/// the same size as [`PL011State`]. We also expect the device is +/// readable/writeable from one thread at any time. +#[no_mangle] +pub unsafe extern "C" fn pl011_init(obj: *mut Object) { + assert!(!obj.is_null()); + let mut state = NonNull::new_unchecked(obj.cast::()); + state.as_mut().init(); +} diff --git a/rust/hw/char/pl011/src/device_class.rs b/rust/hw/char/pl011/src/device_class.rs new file mode 100644 index 0000000000..6b99239133 --- /dev/null +++ b/rust/hw/char/pl011/src/device_class.rs @@ -0,0 +1,58 @@ +// Copyright 2024 Manos Pitsidianakis +// SPDX-License-Identifier: GPL-2.0 OR GPL-3.0-or-later + +use core::ptr::NonNull; + +use qemu_api::bindings::*; + +use crate::{definitions::VMSTATE_PL011, device::PL011State}; + +qemu_api::declare_properties! { + PL011_PROPERTIES, + qemu_api::define_property!( + c"chardev", + PL011State, + char_backend, + unsafe { &qdev_prop_chr }, + CharBackend + ), + qemu_api::define_property!( + c"migrate-clk", + PL011State, + migrate_clock, + unsafe { &qdev_prop_bool }, + bool + ), +} + +qemu_api::device_class_init! { + pl011_class_init, + props => PL011_PROPERTIES, + realize_fn => Some(pl011_realize), + reset_fn => Some(pl011_reset), + vmsd => VMSTATE_PL011, +} + +/// # Safety +/// +/// We expect the FFI user of this function to pass a valid pointer, that has +/// the same size as [`PL011State`]. We also expect the device is +/// readable/writeable from one thread at any time. +#[no_mangle] +pub unsafe extern "C" fn pl011_realize(dev: *mut DeviceState, _errp: *mut *mut Error) { + assert!(!dev.is_null()); + let mut state = NonNull::new_unchecked(dev.cast::()); + state.as_mut().realize(); +} + +/// # Safety +/// +/// We expect the FFI user of this function to pass a valid pointer, that has +/// the same size as [`PL011State`]. We also expect the device is +/// readable/writeable from one thread at any time. +#[no_mangle] +pub unsafe extern "C" fn pl011_reset(dev: *mut DeviceState) { + assert!(!dev.is_null()); + let mut state = NonNull::new_unchecked(dev.cast::()); + state.as_mut().reset(); +} diff --git a/rust/hw/char/pl011/src/lib.rs b/rust/hw/char/pl011/src/lib.rs new file mode 100644 index 0000000000..697d2ef5a6 --- /dev/null +++ b/rust/hw/char/pl011/src/lib.rs @@ -0,0 +1,584 @@ +// Copyright 2024 Manos Pitsidianakis +// SPDX-License-Identifier: GPL-2.0 OR GPL-3.0-or-later +// +// PL011 QEMU Device Model +// +// This library implements a device model for the PrimeCell® UART (PL011) +// device in QEMU. +// +#![doc = include_str!("../README.md")] +//! # Library crate +//! +//! See [`PL011State`](crate::device::PL011State) for the device model type and +//! the [`registers`] module for register types. + +#![deny( + rustdoc::broken_intra_doc_links, + rustdoc::redundant_explicit_links, + clippy::correctness, + clippy::suspicious, + clippy::complexity, + clippy::perf, + clippy::cargo, + clippy::nursery, + clippy::style, + // restriction group + clippy::dbg_macro, + clippy::as_underscore, + clippy::assertions_on_result_states, + // pedantic group + clippy::doc_markdown, + clippy::borrow_as_ptr, + clippy::cast_lossless, + clippy::option_if_let_else, + clippy::missing_const_for_fn, + clippy::cognitive_complexity, + clippy::missing_safety_doc, + )] + +extern crate bilge; +extern crate bilge_impl; +extern crate qemu_api; + +pub mod definitions; +pub mod device; +pub mod device_class; +pub mod memory_ops; + +/// Offset of each register from the base memory address of the device. +/// +/// # Source +/// ARM DDI 0183G, Table 3-1 p.3-3 +#[doc(alias = "offset")] +#[allow(non_camel_case_types)] +#[repr(u64)] +#[derive(Debug)] +pub enum RegisterOffset { + /// Data Register + /// + /// A write to this register initiates the actual data transmission + #[doc(alias = "UARTDR")] + DR = 0x000, + /// Receive Status Register or Error Clear Register + #[doc(alias = "UARTRSR")] + #[doc(alias = "UARTECR")] + RSR = 0x004, + /// Flag Register + /// + /// A read of this register shows if transmission is complete + #[doc(alias = "UARTFR")] + FR = 0x018, + /// Fractional Baud Rate Register + /// + /// responsible for baud rate speed + #[doc(alias = "UARTFBRD")] + FBRD = 0x028, + /// `IrDA` Low-Power Counter Register + #[doc(alias = "UARTILPR")] + ILPR = 0x020, + /// Integer Baud Rate Register + /// + /// Responsible for baud rate speed + #[doc(alias = "UARTIBRD")] + IBRD = 0x024, + /// line control register (data frame format) + #[doc(alias = "UARTLCR_H")] + LCR_H = 0x02C, + /// Toggle UART, transmission or reception + #[doc(alias = "UARTCR")] + CR = 0x030, + /// Interrupt FIFO Level Select Register + #[doc(alias = "UARTIFLS")] + FLS = 0x034, + /// Interrupt Mask Set/Clear Register + #[doc(alias = "UARTIMSC")] + IMSC = 0x038, + /// Raw Interrupt Status Register + #[doc(alias = "UARTRIS")] + RIS = 0x03C, + /// Masked Interrupt Status Register + #[doc(alias = "UARTMIS")] + MIS = 0x040, + /// Interrupt Clear Register + #[doc(alias = "UARTICR")] + ICR = 0x044, + /// DMA control Register + #[doc(alias = "UARTDMACR")] + DMACR = 0x048, + ///// Reserved, offsets `0x04C` to `0x07C`. + //Reserved = 0x04C, +} + +impl core::convert::TryFrom for RegisterOffset { + type Error = u64; + + fn try_from(value: u64) -> Result { + macro_rules! case { + ($($discriminant:ident),*$(,)*) => { + /* check that matching on all macro arguments compiles, which means we are not + * missing any enum value; if the type definition ever changes this will stop + * compiling. + */ + const fn _assert_exhaustive(val: RegisterOffset) { + match val { + $(RegisterOffset::$discriminant => (),)* + } + } + + match value { + $(x if x == Self::$discriminant as u64 => Ok(Self::$discriminant),)* + _ => Err(value), + } + } + } + case! { DR, RSR, FR, FBRD, ILPR, IBRD, LCR_H, CR, FLS, IMSC, RIS, MIS, ICR, DMACR } + } +} + +pub mod registers { + //! Device registers exposed as typed structs which are backed by arbitrary + //! integer bitmaps. [`Data`], [`Control`], [`LineControl`], etc. + //! + //! All PL011 registers are essentially 32-bit wide, but are typed here as + //! bitmaps with only the necessary width. That is, if a struct bitmap + //! in this module is for example 16 bits long, it should be conceived + //! as a 32-bit register where the unmentioned higher bits are always + //! unused thus treated as zero when read or written. + use bilge::prelude::*; + + // TODO: FIFO Mode has different semantics + /// Data Register, `UARTDR` + /// + /// The `UARTDR` register is the data register. + /// + /// For words to be transmitted: + /// + /// - if the FIFOs are enabled, data written to this location is pushed onto + /// the transmit + /// FIFO + /// - if the FIFOs are not enabled, data is stored in the transmitter + /// holding register (the + /// bottom word of the transmit FIFO). + /// + /// The write operation initiates transmission from the UART. The data is + /// prefixed with a start bit, appended with the appropriate parity bit + /// (if parity is enabled), and a stop bit. The resultant word is then + /// transmitted. + /// + /// For received words: + /// + /// - if the FIFOs are enabled, the data byte and the 4-bit status (break, + /// frame, parity, + /// and overrun) is pushed onto the 12-bit wide receive FIFO + /// - if the FIFOs are not enabled, the data byte and status are stored in + /// the receiving + /// holding register (the bottom word of the receive FIFO). + /// + /// The received data byte is read by performing reads from the `UARTDR` + /// register along with the corresponding status information. The status + /// information can also be read by a read of the `UARTRSR/UARTECR` + /// register. + /// + /// # Note + /// + /// You must disable the UART before any of the control registers are + /// reprogrammed. When the UART is disabled in the middle of + /// transmission or reception, it completes the current character before + /// stopping. + /// + /// # Source + /// ARM DDI 0183G 3.3.1 Data Register, UARTDR + #[bitsize(16)] + #[derive(Clone, Copy, DebugBits, FromBits)] + #[doc(alias = "UARTDR")] + pub struct Data { + _reserved: u4, + pub data: u8, + pub framing_error: bool, + pub parity_error: bool, + pub break_error: bool, + pub overrun_error: bool, + } + + // TODO: FIFO Mode has different semantics + /// Receive Status Register / Error Clear Register, `UARTRSR/UARTECR` + /// + /// The UARTRSR/UARTECR register is the receive status register/error clear + /// register. Receive status can also be read from the `UARTRSR` + /// register. If the status is read from this register, then the status + /// information for break, framing and parity corresponds to the + /// data character read from the [Data register](Data), `UARTDR` prior to + /// reading the UARTRSR register. The status information for overrun is + /// set immediately when an overrun condition occurs. + /// + /// + /// # Note + /// The received data character must be read first from the [Data + /// Register](Data), `UARTDR` before reading the error status associated + /// with that data character from the `UARTRSR` register. This read + /// sequence cannot be reversed, because the `UARTRSR` register is + /// updated only when a read occurs from the `UARTDR` register. However, + /// the status information can also be obtained by reading the `UARTDR` + /// register + /// + /// # Source + /// ARM DDI 0183G 3.3.2 Receive Status Register/Error Clear Register, + /// UARTRSR/UARTECR + #[bitsize(8)] + #[derive(Clone, Copy, DebugBits, FromBits)] + pub struct ReceiveStatusErrorClear { + pub framing_error: bool, + pub parity_error: bool, + pub break_error: bool, + pub overrun_error: bool, + _reserved_unpredictable: u4, + } + + impl ReceiveStatusErrorClear { + pub fn reset(&mut self) { + // All the bits are cleared to 0 on reset. + *self = 0.into(); + } + } + + impl Default for ReceiveStatusErrorClear { + fn default() -> Self { + 0.into() + } + } + + #[bitsize(16)] + #[derive(Clone, Copy, DebugBits, FromBits)] + /// Flag Register, `UARTFR` + #[doc(alias = "UARTFR")] + pub struct Flags { + /// CTS Clear to send. This bit is the complement of the UART clear to + /// send, `nUARTCTS`, modem status input. That is, the bit is 1 + /// when `nUARTCTS` is LOW. + pub clear_to_send: bool, + /// DSR Data set ready. This bit is the complement of the UART data set + /// ready, `nUARTDSR`, modem status input. That is, the bit is 1 when + /// `nUARTDSR` is LOW. + pub data_set_ready: bool, + /// DCD Data carrier detect. This bit is the complement of the UART data + /// carrier detect, `nUARTDCD`, modem status input. That is, the bit is + /// 1 when `nUARTDCD` is LOW. + pub data_carrier_detect: bool, + /// BUSY UART busy. If this bit is set to 1, the UART is busy + /// transmitting data. This bit remains set until the complete + /// byte, including all the stop bits, has been sent from the + /// shift register. This bit is set as soon as the transmit FIFO + /// becomes non-empty, regardless of whether the UART is enabled + /// or not. + pub busy: bool, + /// RXFE Receive FIFO empty. The meaning of this bit depends on the + /// state of the FEN bit in the UARTLCR_H register. If the FIFO + /// is disabled, this bit is set when the receive holding + /// register is empty. If the FIFO is enabled, the RXFE bit is + /// set when the receive FIFO is empty. + pub receive_fifo_empty: bool, + /// TXFF Transmit FIFO full. The meaning of this bit depends on the + /// state of the FEN bit in the UARTLCR_H register. If the FIFO + /// is disabled, this bit is set when the transmit holding + /// register is full. If the FIFO is enabled, the TXFF bit is + /// set when the transmit FIFO is full. + pub transmit_fifo_full: bool, + /// RXFF Receive FIFO full. The meaning of this bit depends on the state + /// of the FEN bit in the UARTLCR_H register. If the FIFO is + /// disabled, this bit is set when the receive holding register + /// is full. If the FIFO is enabled, the RXFF bit is set when + /// the receive FIFO is full. + pub receive_fifo_full: bool, + /// Transmit FIFO empty. The meaning of this bit depends on the state of + /// the FEN bit in the [Line Control register](LineControl), + /// `UARTLCR_H`. If the FIFO is disabled, this bit is set when the + /// transmit holding register is empty. If the FIFO is enabled, + /// the TXFE bit is set when the transmit FIFO is empty. This + /// bit does not indicate if there is data in the transmit shift + /// register. + pub transmit_fifo_empty: bool, + /// `RI`, is `true` when `nUARTRI` is `LOW`. + pub ring_indicator: bool, + _reserved_zero_no_modify: u7, + } + + impl Flags { + pub fn reset(&mut self) { + // After reset TXFF, RXFF, and BUSY are 0, and TXFE and RXFE are 1 + self.set_receive_fifo_full(false); + self.set_transmit_fifo_full(false); + self.set_busy(false); + self.set_receive_fifo_empty(true); + self.set_transmit_fifo_empty(true); + } + } + + impl Default for Flags { + fn default() -> Self { + let mut ret: Self = 0.into(); + ret.reset(); + ret + } + } + + #[bitsize(16)] + #[derive(Clone, Copy, DebugBits, FromBits)] + /// Line Control Register, `UARTLCR_H` + #[doc(alias = "UARTLCR_H")] + pub struct LineControl { + /// 15:8 - Reserved, do not modify, read as zero. + _reserved_zero_no_modify: u8, + /// 7 SPS Stick parity select. + /// 0 = stick parity is disabled + /// 1 = either: + /// • if the EPS bit is 0 then the parity bit is transmitted and checked + /// as a 1 • if the EPS bit is 1 then the parity bit is + /// transmitted and checked as a 0. This bit has no effect when + /// the PEN bit disables parity checking and generation. See Table 3-11 + /// on page 3-14 for the parity truth table. + pub sticky_parity: bool, + /// WLEN Word length. These bits indicate the number of data bits + /// transmitted or received in a frame as follows: b11 = 8 bits + /// b10 = 7 bits + /// b01 = 6 bits + /// b00 = 5 bits. + pub word_length: WordLength, + /// FEN Enable FIFOs: + /// 0 = FIFOs are disabled (character mode) that is, the FIFOs become + /// 1-byte-deep holding registers 1 = transmit and receive FIFO + /// buffers are enabled (FIFO mode). + pub fifos_enabled: Mode, + /// 3 STP2 Two stop bits select. If this bit is set to 1, two stop bits + /// are transmitted at the end of the frame. The receive + /// logic does not check for two stop bits being received. + pub two_stops_bits: bool, + /// EPS Even parity select. Controls the type of parity the UART uses + /// during transmission and reception: + /// - 0 = odd parity. The UART generates or checks for an odd number of + /// 1s in the data and parity bits. + /// - 1 = even parity. The UART generates or checks for an even number + /// of 1s in the data and parity bits. + /// This bit has no effect when the `PEN` bit disables parity checking + /// and generation. See Table 3-11 on page 3-14 for the parity + /// truth table. + pub parity: Parity, + /// 1 PEN Parity enable: + /// + /// - 0 = parity is disabled and no parity bit added to the data frame + /// - 1 = parity checking and generation is enabled. + /// + /// See Table 3-11 on page 3-14 for the parity truth table. + pub parity_enabled: bool, + /// BRK Send break. + /// + /// If this bit is set to `1`, a low-level is continually output on the + /// `UARTTXD` output, after completing transmission of the + /// current character. For the proper execution of the break command, + /// the software must set this bit for at least two complete + /// frames. For normal use, this bit must be cleared to `0`. + pub send_break: bool, + } + + impl LineControl { + pub fn reset(&mut self) { + // All the bits are cleared to 0 when reset. + *self = 0.into(); + } + } + + impl Default for LineControl { + fn default() -> Self { + 0.into() + } + } + + #[bitsize(1)] + #[derive(Clone, Copy, Debug, Eq, FromBits, PartialEq)] + /// `EPS` "Even parity select", field of [Line Control + /// register](LineControl). + pub enum Parity { + /// - 0 = odd parity. The UART generates or checks for an odd number of + /// 1s in the data and parity bits. + Odd = 0, + /// - 1 = even parity. The UART generates or checks for an even number + /// of 1s in the data and parity bits. + Even = 1, + } + + #[bitsize(1)] + #[derive(Clone, Copy, Debug, Eq, FromBits, PartialEq)] + /// `FEN` "Enable FIFOs" or Device mode, field of [Line Control + /// register](LineControl). + pub enum Mode { + /// 0 = FIFOs are disabled (character mode) that is, the FIFOs become + /// 1-byte-deep holding registers + Character = 0, + /// 1 = transmit and receive FIFO buffers are enabled (FIFO mode). + FIFO = 1, + } + + impl From for bool { + fn from(val: Mode) -> Self { + matches!(val, Mode::FIFO) + } + } + + #[bitsize(2)] + #[derive(Clone, Copy, Debug, Eq, FromBits, PartialEq)] + /// `WLEN` Word length, field of [Line Control register](LineControl). + /// + /// These bits indicate the number of data bits transmitted or received in a + /// frame as follows: + pub enum WordLength { + /// b11 = 8 bits + _8Bits = 0b11, + /// b10 = 7 bits + _7Bits = 0b10, + /// b01 = 6 bits + _6Bits = 0b01, + /// b00 = 5 bits. + _5Bits = 0b00, + } + + /// Control Register, `UARTCR` + /// + /// The `UARTCR` register is the control register. All the bits are cleared + /// to `0` on reset except for bits `9` and `8` that are set to `1`. + /// + /// # Source + /// ARM DDI 0183G, 3.3.8 Control Register, `UARTCR`, Table 3-12 + #[bitsize(16)] + #[doc(alias = "UARTCR")] + #[derive(Clone, Copy, DebugBits, FromBits)] + pub struct Control { + /// `UARTEN` UART enable: 0 = UART is disabled. If the UART is disabled + /// in the middle of transmission or reception, it completes the current + /// character before stopping. 1 = the UART is enabled. Data + /// transmission and reception occurs for either UART signals or SIR + /// signals depending on the setting of the SIREN bit. + pub enable_uart: bool, + /// `SIREN` `SIR` enable: 0 = IrDA SIR ENDEC is disabled. `nSIROUT` + /// remains LOW (no light pulse generated), and signal transitions on + /// SIRIN have no effect. 1 = IrDA SIR ENDEC is enabled. Data is + /// transmitted and received on nSIROUT and SIRIN. UARTTXD remains HIGH, + /// in the marking state. Signal transitions on UARTRXD or modem status + /// inputs have no effect. This bit has no effect if the UARTEN bit + /// disables the UART. + pub enable_sir: bool, + /// `SIRLP` SIR low-power IrDA mode. This bit selects the IrDA encoding + /// mode. If this bit is cleared to 0, low-level bits are transmitted as + /// an active high pulse with a width of 3/ 16th of the bit period. If + /// this bit is set to 1, low-level bits are transmitted with a pulse + /// width that is 3 times the period of the IrLPBaud16 input signal, + /// regardless of the selected bit rate. Setting this bit uses less + /// power, but might reduce transmission distances. + pub sir_lowpower_irda_mode: u1, + /// Reserved, do not modify, read as zero. + _reserved_zero_no_modify: u4, + /// `LBE` Loopback enable. If this bit is set to 1 and the SIREN bit is + /// set to 1 and the SIRTEST bit in the Test Control register, UARTTCR + /// on page 4-5 is set to 1, then the nSIROUT path is inverted, and fed + /// through to the SIRIN path. The SIRTEST bit in the test register must + /// be set to 1 to override the normal half-duplex SIR operation. This + /// must be the requirement for accessing the test registers during + /// normal operation, and SIRTEST must be cleared to 0 when loopback + /// testing is finished. This feature reduces the amount of external + /// coupling required during system test. If this bit is set to 1, and + /// the SIRTEST bit is set to 0, the UARTTXD path is fed through to the + /// UARTRXD path. In either SIR mode or UART mode, when this bit is set, + /// the modem outputs are also fed through to the modem inputs. This bit + /// is cleared to 0 on reset, to disable loopback. + pub enable_loopback: bool, + /// `TXE` Transmit enable. If this bit is set to 1, the transmit section + /// of the UART is enabled. Data transmission occurs for either UART + /// signals, or SIR signals depending on the setting of the SIREN bit. + /// When the UART is disabled in the middle of transmission, it + /// completes the current character before stopping. + pub enable_transmit: bool, + /// `RXE` Receive enable. If this bit is set to 1, the receive section + /// of the UART is enabled. Data reception occurs for either UART + /// signals or SIR signals depending on the setting of the SIREN bit. + /// When the UART is disabled in the middle of reception, it completes + /// the current character before stopping. + pub enable_receive: bool, + /// `DTR` Data transmit ready. This bit is the complement of the UART + /// data transmit ready, `nUARTDTR`, modem status output. That is, when + /// the bit is programmed to a 1 then `nUARTDTR` is LOW. + pub data_transmit_ready: bool, + /// `RTS` Request to send. This bit is the complement of the UART + /// request to send, `nUARTRTS`, modem status output. That is, when the + /// bit is programmed to a 1 then `nUARTRTS` is LOW. + pub request_to_send: bool, + /// `Out1` This bit is the complement of the UART Out1 (`nUARTOut1`) + /// modem status output. That is, when the bit is programmed to a 1 the + /// output is 0. For DTE this can be used as Data Carrier Detect (DCD). + pub out_1: bool, + /// `Out2` This bit is the complement of the UART Out2 (`nUARTOut2`) + /// modem status output. That is, when the bit is programmed to a 1, the + /// output is 0. For DTE this can be used as Ring Indicator (RI). + pub out_2: bool, + /// `RTSEn` RTS hardware flow control enable. If this bit is set to 1, + /// RTS hardware flow control is enabled. Data is only requested when + /// there is space in the receive FIFO for it to be received. + pub rts_hardware_flow_control_enable: bool, + /// `CTSEn` CTS hardware flow control enable. If this bit is set to 1, + /// CTS hardware flow control is enabled. Data is only transmitted when + /// the `nUARTCTS` signal is asserted. + pub cts_hardware_flow_control_enable: bool, + } + + impl Control { + pub fn reset(&mut self) { + *self = 0.into(); + self.set_enable_receive(true); + self.set_enable_transmit(true); + } + } + + impl Default for Control { + fn default() -> Self { + let mut ret: Self = 0.into(); + ret.reset(); + ret + } + } + + /// Interrupt status bits in UARTRIS, UARTMIS, UARTIMSC + pub const INT_OE: u32 = 1 << 10; + pub const INT_BE: u32 = 1 << 9; + pub const INT_PE: u32 = 1 << 8; + pub const INT_FE: u32 = 1 << 7; + pub const INT_RT: u32 = 1 << 6; + pub const INT_TX: u32 = 1 << 5; + pub const INT_RX: u32 = 1 << 4; + pub const INT_DSR: u32 = 1 << 3; + pub const INT_DCD: u32 = 1 << 2; + pub const INT_CTS: u32 = 1 << 1; + pub const INT_RI: u32 = 1 << 0; + pub const INT_E: u32 = INT_OE | INT_BE | INT_PE | INT_FE; + pub const INT_MS: u32 = INT_RI | INT_DSR | INT_DCD | INT_CTS; + + #[repr(u32)] + pub enum Interrupt { + OE = 1 << 10, + BE = 1 << 9, + PE = 1 << 8, + FE = 1 << 7, + RT = 1 << 6, + TX = 1 << 5, + RX = 1 << 4, + DSR = 1 << 3, + DCD = 1 << 2, + CTS = 1 << 1, + RI = 1 << 0, + } + + impl Interrupt { + pub const E: u32 = INT_OE | INT_BE | INT_PE | INT_FE; + pub const MS: u32 = INT_RI | INT_DSR | INT_DCD | INT_CTS; + } +} + +// TODO: You must disable the UART before any of the control registers are +// reprogrammed. When the UART is disabled in the middle of transmission or +// reception, it completes the current character before stopping diff --git a/rust/hw/char/pl011/src/memory_ops.rs b/rust/hw/char/pl011/src/memory_ops.rs new file mode 100644 index 0000000000..5e185b7cd7 --- /dev/null +++ b/rust/hw/char/pl011/src/memory_ops.rs @@ -0,0 +1,56 @@ +// Copyright 2024 Manos Pitsidianakis +// SPDX-License-Identifier: GPL-2.0 OR GPL-3.0-or-later + +use core::{mem::MaybeUninit, ptr::NonNull}; + +use qemu_api::bindings::*; + +use crate::device::PL011State; + +pub static PL011_OPS: MemoryRegionOps = MemoryRegionOps { + read: Some(pl011_read), + write: Some(pl011_write), + read_with_attrs: None, + write_with_attrs: None, + endianness: device_endian_DEVICE_NATIVE_ENDIAN, + valid: unsafe { MaybeUninit::::zeroed().assume_init() }, + impl_: MemoryRegionOps__bindgen_ty_2 { + min_access_size: 4, + max_access_size: 4, + ..unsafe { MaybeUninit::::zeroed().assume_init() } + }, +}; + +#[no_mangle] +unsafe extern "C" fn pl011_read( + opaque: *mut core::ffi::c_void, + addr: hwaddr, + size: core::ffi::c_uint, +) -> u64 { + assert!(!opaque.is_null()); + let mut state = NonNull::new_unchecked(opaque.cast::()); + let val = state.as_mut().read(addr, size); + match val { + std::ops::ControlFlow::Break(val) => val, + std::ops::ControlFlow::Continue(val) => { + // SAFETY: self.char_backend is a valid CharBackend instance after it's been + // initialized in realize(). + let cb_ptr = core::ptr::addr_of_mut!(state.as_mut().char_backend); + unsafe { qemu_chr_fe_accept_input(cb_ptr) }; + + val + } + } +} + +#[no_mangle] +unsafe extern "C" fn pl011_write( + opaque: *mut core::ffi::c_void, + addr: hwaddr, + data: u64, + _size: core::ffi::c_uint, +) { + assert!(!opaque.is_null()); + let mut state = NonNull::new_unchecked(opaque.cast::()); + state.as_mut().write(addr, data) +} diff --git a/rust/hw/meson.build b/rust/hw/meson.build new file mode 100644 index 0000000000..860196645e --- /dev/null +++ b/rust/hw/meson.build @@ -0,0 +1 @@ +subdir('char') diff --git a/rust/meson.build b/rust/meson.build index d5f32aed25..590e9397c3 100644 --- a/rust/meson.build +++ b/rust/meson.build @@ -7,3 +7,5 @@ _lib_bindings_rs = static_library( ) subdir('qemu-api') + +subdir('hw') diff --git a/scripts/archive-source.sh b/scripts/archive-source.sh index 65af8063e4..eed67b3e67 100755 --- a/scripts/archive-source.sh +++ b/scripts/archive-source.sh @@ -26,7 +26,10 @@ sub_file="${sub_tdir}/submodule.tar" # independent of what the developer currently has initialized # in their checkout, because the build environment is completely # different to the host OS. -subprojects="keycodemapdb libvfio-user berkeley-softfloat-3 berkeley-testfloat-3" +subprojects="keycodemapdb libvfio-user berkeley-softfloat-3 berkeley-testfloat-3 + arbitrary-int-1.2.7 bilge-0.2.0 bilge-impl-0.2.0 either-1.12.0 itertools-0.11.0 + proc-macro2-1.0.84 proc-macro-error-1.0.4 proc-macro-error-attr-1.0.4 + quote-1.0.36 syn-2.0.66 unicode-ident-1.0.12" sub_deinit="" function cleanup() { diff --git a/scripts/make-release b/scripts/make-release index 6e0433de24..841404274b 100755 --- a/scripts/make-release +++ b/scripts/make-release @@ -17,7 +17,10 @@ if [ $# -ne 2 ]; then fi # Only include wraps that are invoked with subproject() -SUBPROJECTS="libvfio-user keycodemapdb berkeley-softfloat-3 berkeley-testfloat-3" +SUBPROJECTS="libvfio-user keycodemapdb berkeley-softfloat-3 berkeley-testfloat-3 + arbitrary-int-1.2.7 bilge-0.2.0 bilge-impl-0.2.0 either-1.12.0 itertools-0.11.0 + proc-macro2-1.0.84 proc-macro-error-1.0.4 proc-macro-error-attr-1.0.4 + quote-1.0.36 syn-2.0.66 unicode-ident-1.0.12" src="$1" version="$2" diff --git a/subprojects/.gitignore b/subprojects/.gitignore index adca0266be..50f173f90d 100644 --- a/subprojects/.gitignore +++ b/subprojects/.gitignore @@ -6,3 +6,14 @@ /keycodemapdb /libvfio-user /slirp +/arbitrary-int-1.2.7 +/bilge-0.2.0 +/bilge-impl-0.2.0 +/either-1.12.0 +/itertools-0.11.0 +/proc-macro-error-1.0.4 +/proc-macro-error-attr-1.0.4 +/proc-macro2-1.0.84 +/quote-1.0.36 +/syn-2.0.66 +/unicode-ident-1.0.12 diff --git a/subprojects/arbitrary-int-1-rs.wrap b/subprojects/arbitrary-int-1-rs.wrap new file mode 100644 index 0000000000..e580538a87 --- /dev/null +++ b/subprojects/arbitrary-int-1-rs.wrap @@ -0,0 +1,7 @@ +[wrap-file] +directory = arbitrary-int-1.2.7 +source_url = https://crates.io/api/v1/crates/arbitrary-int/1.2.7/download +source_filename = arbitrary-int-1.2.7.tar.gz +source_hash = c84fc003e338a6f69fbd4f7fe9f92b535ff13e9af8997f3b14b6ddff8b1df46d +#method = cargo +patch_directory = arbitrary-int-1-rs diff --git a/subprojects/bilge-0.2-rs.wrap b/subprojects/bilge-0.2-rs.wrap new file mode 100644 index 0000000000..7a4339d298 --- /dev/null +++ b/subprojects/bilge-0.2-rs.wrap @@ -0,0 +1,7 @@ +[wrap-file] +directory = bilge-0.2.0 +source_url = https://crates.io/api/v1/crates/bilge/0.2.0/download +source_filename = bilge-0.2.0.tar.gz +source_hash = dc707ed8ebf81de5cd6c7f48f54b4c8621760926cdf35a57000747c512e67b57 +#method = cargo +patch_directory = bilge-0.2-rs diff --git a/subprojects/bilge-impl-0.2-rs.wrap b/subprojects/bilge-impl-0.2-rs.wrap new file mode 100644 index 0000000000..eefb10c36c --- /dev/null +++ b/subprojects/bilge-impl-0.2-rs.wrap @@ -0,0 +1,7 @@ +[wrap-file] +directory = bilge-impl-0.2.0 +source_url = https://crates.io/api/v1/crates/bilge-impl/0.2.0/download +source_filename = bilge-impl-0.2.0.tar.gz +source_hash = feb11e002038ad243af39c2068c8a72bcf147acf05025dcdb916fcc000adb2d8 +#method = cargo +patch_directory = bilge-impl-0.2-rs diff --git a/subprojects/either-1-rs.wrap b/subprojects/either-1-rs.wrap new file mode 100644 index 0000000000..6046712036 --- /dev/null +++ b/subprojects/either-1-rs.wrap @@ -0,0 +1,7 @@ +[wrap-file] +directory = either-1.12.0 +source_url = https://crates.io/api/v1/crates/either/1.12.0/download +source_filename = either-1.12.0.tar.gz +source_hash = 3dca9240753cf90908d7e4aac30f630662b02aebaa1b58a3cadabdb23385b58b +#method = cargo +patch_directory = either-1-rs diff --git a/subprojects/itertools-0.11-rs.wrap b/subprojects/itertools-0.11-rs.wrap new file mode 100644 index 0000000000..66b05252cd --- /dev/null +++ b/subprojects/itertools-0.11-rs.wrap @@ -0,0 +1,7 @@ +[wrap-file] +directory = itertools-0.11.0 +source_url = https://crates.io/api/v1/crates/itertools/0.11.0/download +source_filename = itertools-0.11.0.tar.gz +source_hash = b1c173a5686ce8bfa551b3563d0c2170bf24ca44da99c7ca4bfdab5418c3fe57 +#method = cargo +patch_directory = itertools-0.11-rs diff --git a/subprojects/packagefiles/arbitrary-int-1-rs/meson.build b/subprojects/packagefiles/arbitrary-int-1-rs/meson.build new file mode 100644 index 0000000000..34a189cbae --- /dev/null +++ b/subprojects/packagefiles/arbitrary-int-1-rs/meson.build @@ -0,0 +1,19 @@ +project('arbitrary-int-1-rs', 'rust', + version: '1.2.7', + license: 'MIT', + default_options: []) + +_arbitrary_int_rs = static_library( + 'arbitrary_int', + files('src/lib.rs'), + gnu_symbol_visibility: 'hidden', + override_options: ['rust_std=2021', 'build.rust_std=2021'], + rust_abi: 'rust', + dependencies: [], +) + +arbitrary_int_dep = declare_dependency( + link_with: _arbitrary_int_rs, +) + +meson.override_dependency('arbitrary-int-1-rs', arbitrary_int_dep) diff --git a/subprojects/packagefiles/bilge-0.2-rs/meson.build b/subprojects/packagefiles/bilge-0.2-rs/meson.build new file mode 100644 index 0000000000..a6ed4a8f0c --- /dev/null +++ b/subprojects/packagefiles/bilge-0.2-rs/meson.build @@ -0,0 +1,29 @@ +project( + 'bilge-0.2-rs', + 'rust', + version : '0.2.0', + license : 'MIT or Apache-2.0', +) + +subproject('arbitrary-int-1-rs', required: true) +subproject('bilge-impl-0.2-rs', required: true) + +arbitrary_int_dep = dependency('arbitrary-int-1-rs') +bilge_impl_dep = dependency('bilge-impl-0.2-rs') + +lib = static_library( + 'bilge', + 'src/lib.rs', + override_options : ['rust_std=2021', 'build.rust_std=2021'], + rust_abi : 'rust', + dependencies: [ + arbitrary_int_dep, + bilge_impl_dep, + ], +) + +bilge_dep = declare_dependency( + link_with : [lib], +) + +meson.override_dependency('bilge-0.2-rs', bilge_dep) diff --git a/subprojects/packagefiles/bilge-impl-0.2-rs/meson.build b/subprojects/packagefiles/bilge-impl-0.2-rs/meson.build new file mode 100644 index 0000000000..80243c7024 --- /dev/null +++ b/subprojects/packagefiles/bilge-impl-0.2-rs/meson.build @@ -0,0 +1,45 @@ +project('bilge-impl-0.2-rs', 'rust', + version: '0.2.0', + license: 'MIT OR Apache-2.0', + default_options: []) + +subproject('itertools-0.11-rs', required: true) +subproject('proc-macro-error-attr-1-rs', required: true) +subproject('proc-macro-error-1-rs', required: true) +subproject('quote-1-rs', required: true) +subproject('syn-2-rs', required: true) +subproject('proc-macro2-1-rs', required: true) + +itertools_dep = dependency('itertools-0.11-rs', native: true) +proc_macro_error_attr_dep = dependency('proc-macro-error-attr-1-rs', native: true) +proc_macro_error_dep = dependency('proc-macro-error-1-rs', native: true) +quote_dep = dependency('quote-1-rs', native: true) +syn_dep = dependency('syn-2-rs', native: true) +proc_macro2_dep = dependency('proc-macro2-1-rs', native: true) + +rust = import('rust') + +_bilge_impl_rs = rust.proc_macro( + 'bilge_impl', + files('src/lib.rs'), + override_options: ['rust_std=2021', 'build.rust_std=2021'], + rust_args: [ + '--cfg', 'use_fallback', + '--cfg', 'feature="syn-error"', + '--cfg', 'feature="proc-macro"', + ], + dependencies: [ + itertools_dep, + proc_macro_error_attr_dep, + proc_macro_error_dep, + quote_dep, + syn_dep, + proc_macro2_dep, + ], +) + +bilge_impl_dep = declare_dependency( + link_with: _bilge_impl_rs, +) + +meson.override_dependency('bilge-impl-0.2-rs', bilge_impl_dep) diff --git a/subprojects/packagefiles/either-1-rs/meson.build b/subprojects/packagefiles/either-1-rs/meson.build new file mode 100644 index 0000000000..a5842eb3a6 --- /dev/null +++ b/subprojects/packagefiles/either-1-rs/meson.build @@ -0,0 +1,24 @@ +project('either-1-rs', 'rust', + version: '1.12.0', + license: 'MIT OR Apache-2.0', + default_options: []) + +_either_rs = static_library( + 'either', + files('src/lib.rs'), + gnu_symbol_visibility: 'hidden', + override_options: ['rust_std=2018', 'build.rust_std=2018'], + rust_abi: 'rust', + rust_args: [ + '--cfg', 'feature="use_std"', + '--cfg', 'feature="use_alloc"', + ], + dependencies: [], + native: true, +) + +either_dep = declare_dependency( + link_with: _either_rs, +) + +meson.override_dependency('either-1-rs', either_dep, native: true) diff --git a/subprojects/packagefiles/itertools-0.11-rs/meson.build b/subprojects/packagefiles/itertools-0.11-rs/meson.build new file mode 100644 index 0000000000..13d2d27019 --- /dev/null +++ b/subprojects/packagefiles/itertools-0.11-rs/meson.build @@ -0,0 +1,30 @@ +project('itertools-0.11-rs', 'rust', + version: '0.11.0', + license: 'MIT OR Apache-2.0', + default_options: []) + +subproject('either-1-rs', required: true) + +either_dep = dependency('either-1-rs', native: true) + +_itertools_rs = static_library( + 'itertools', + files('src/lib.rs'), + gnu_symbol_visibility: 'hidden', + override_options: ['rust_std=2018', 'build.rust_std=2018'], + rust_abi: 'rust', + rust_args: [ + '--cfg', 'feature="use_std"', + '--cfg', 'feature="use_alloc"', + ], + dependencies: [ + either_dep, + ], + native: true, +) + +itertools_dep = declare_dependency( + link_with: _itertools_rs, +) + +meson.override_dependency('itertools-0.11-rs', itertools_dep, native: true) diff --git a/subprojects/packagefiles/proc-macro-error-1-rs/meson.build b/subprojects/packagefiles/proc-macro-error-1-rs/meson.build new file mode 100644 index 0000000000..38ea7b89d3 --- /dev/null +++ b/subprojects/packagefiles/proc-macro-error-1-rs/meson.build @@ -0,0 +1,40 @@ +project('proc-macro-error-1-rs', 'rust', + version: '1.0.4', + license: 'MIT OR Apache-2.0', + default_options: []) + +subproject('proc-macro-error-attr-1-rs', required: true) +subproject('quote-1-rs', required: true) +subproject('syn-2-rs', required: true) +subproject('proc-macro2-1-rs', required: true) + +proc_macro_error_attr_dep = dependency('proc-macro-error-attr-1-rs', native: true) +proc_macro2_dep = dependency('proc-macro2-1-rs', native: true) +quote_dep = dependency('quote-1-rs', native: true) +syn_dep = dependency('syn-2-rs', native: true) + +_proc_macro_error_rs = static_library( + 'proc_macro_error', + files('src/lib.rs'), + override_options: ['rust_std=2018', 'build.rust_std=2018'], + rust_abi: 'rust', + rust_args: [ + '--cfg', 'use_fallback', + '--cfg', 'feature="syn-error"', + '--cfg', 'feature="proc-macro"', + '-A', 'non_fmt_panics' + ], + dependencies: [ + proc_macro_error_attr_dep, + proc_macro2_dep, + quote_dep, + syn_dep, + ], + native: true, +) + +proc_macro_error_dep = declare_dependency( + link_with: _proc_macro_error_rs, +) + +meson.override_dependency('proc-macro-error-1-rs', proc_macro_error_dep, native: true) diff --git a/subprojects/packagefiles/proc-macro-error-attr-1-rs/meson.build b/subprojects/packagefiles/proc-macro-error-attr-1-rs/meson.build new file mode 100644 index 0000000000..d900c54cfd --- /dev/null +++ b/subprojects/packagefiles/proc-macro-error-attr-1-rs/meson.build @@ -0,0 +1,32 @@ +project('proc-macro-error-attr-1-rs', 'rust', + version: '1.12.0', + license: 'MIT OR Apache-2.0', + default_options: []) + +subproject('proc-macro2-1-rs', required: true) +subproject('quote-1-rs', required: true) + +proc_macro2_dep = dependency('proc-macro2-1-rs', native: true) +quote_dep = dependency('quote-1-rs', native: true) + +rust = import('rust') +_proc_macro_error_attr_rs = rust.proc_macro( + 'proc_macro_error_attr', + files('src/lib.rs'), + override_options: ['rust_std=2018', 'build.rust_std=2018'], + rust_args: [ + '--cfg', 'use_fallback', + '--cfg', 'feature="syn-error"', + '--cfg', 'feature="proc-macro"' + ], + dependencies: [ + proc_macro2_dep, + quote_dep, + ], +) + +proc_macro_error_attr_dep = declare_dependency( + link_with: _proc_macro_error_attr_rs, +) + +meson.override_dependency('proc-macro-error-attr-1-rs', proc_macro_error_attr_dep, native: true) diff --git a/subprojects/packagefiles/proc-macro2-1-rs/meson.build b/subprojects/packagefiles/proc-macro2-1-rs/meson.build new file mode 100644 index 0000000000..818ec59336 --- /dev/null +++ b/subprojects/packagefiles/proc-macro2-1-rs/meson.build @@ -0,0 +1,31 @@ +project('proc-macro2-1-rs', 'rust', + version: '1.0.84', + license: 'MIT OR Apache-2.0', + default_options: []) + +subproject('unicode-ident-1-rs', required: true) + +unicode_ident_dep = dependency('unicode-ident-1-rs', native: true) + +_proc_macro2_rs = static_library( + 'proc_macro2', + files('src/lib.rs'), + gnu_symbol_visibility: 'hidden', + override_options: ['rust_std=2021', 'build.rust_std=2021'], + rust_abi: 'rust', + rust_args: [ + '--cfg', 'feature="proc-macro"', + '--cfg', 'span_locations', + '--cfg', 'wrap_proc_macro', + ], + dependencies: [ + unicode_ident_dep, + ], + native: true, +) + +proc_macro2_dep = declare_dependency( + link_with: _proc_macro2_rs, +) + +meson.override_dependency('proc-macro2-1-rs', proc_macro2_dep, native: true) diff --git a/subprojects/packagefiles/quote-1-rs/meson.build b/subprojects/packagefiles/quote-1-rs/meson.build new file mode 100644 index 0000000000..d36609bd3c --- /dev/null +++ b/subprojects/packagefiles/quote-1-rs/meson.build @@ -0,0 +1,29 @@ +project('quote-1-rs', 'rust', + version: '1.12.0', + license: 'MIT OR Apache-2.0', + default_options: []) + +subproject('proc-macro2-1-rs', required: true) + +proc_macro2_dep = dependency('proc-macro2-1-rs', native: true) + +_quote_rs = static_library( + 'quote', + files('src/lib.rs'), + gnu_symbol_visibility: 'hidden', + override_options: ['rust_std=2021', 'build.rust_std=2021'], + rust_abi: 'rust', + rust_args: [ + '--cfg', 'feature="proc-macro"', + ], + dependencies: [ + proc_macro2_dep, + ], + native: true, +) + +quote_dep = declare_dependency( + link_with: _quote_rs, +) + +meson.override_dependency('quote-1-rs', quote_dep, native: true) diff --git a/subprojects/packagefiles/syn-2-rs/meson.build b/subprojects/packagefiles/syn-2-rs/meson.build new file mode 100644 index 0000000000..a53335f309 --- /dev/null +++ b/subprojects/packagefiles/syn-2-rs/meson.build @@ -0,0 +1,40 @@ +project('syn-2-rs', 'rust', + version: '2.0.66', + license: 'MIT OR Apache-2.0', + default_options: []) + +subproject('proc-macro2-1-rs', required: true) +subproject('quote-1-rs', required: true) +subproject('unicode-ident-1-rs', required: true) + +proc_macro2_dep = dependency('proc-macro2-1-rs', native: true) +quote_dep = dependency('quote-1-rs', native: true) +unicode_ident_dep = dependency('unicode-ident-1-rs', native: true) + +_syn_rs = static_library( + 'syn', + files('src/lib.rs'), + gnu_symbol_visibility: 'hidden', + override_options: ['rust_std=2021', 'build.rust_std=2021'], + rust_abi: 'rust', + rust_args: [ + '--cfg', 'feature="full"', + '--cfg', 'feature="derive"', + '--cfg', 'feature="parsing"', + '--cfg', 'feature="printing"', + '--cfg', 'feature="clone-impls"', + '--cfg', 'feature="proc-macro"', + ], + dependencies: [ + quote_dep, + proc_macro2_dep, + unicode_ident_dep, + ], + native: true, +) + +syn_dep = declare_dependency( + link_with: _syn_rs, +) + +meson.override_dependency('syn-2-rs', syn_dep, native: true) diff --git a/subprojects/packagefiles/unicode-ident-1-rs/meson.build b/subprojects/packagefiles/unicode-ident-1-rs/meson.build new file mode 100644 index 0000000000..54f2376854 --- /dev/null +++ b/subprojects/packagefiles/unicode-ident-1-rs/meson.build @@ -0,0 +1,20 @@ +project('unicode-ident-1-rs', 'rust', + version: '1.0.12', + license: '(MIT OR Apache-2.0) AND Unicode-DFS-2016', + default_options: []) + +_unicode_ident_rs = static_library( + 'unicode_ident', + files('src/lib.rs'), + gnu_symbol_visibility: 'hidden', + override_options: ['rust_std=2021', 'build.rust_std=2021'], + rust_abi: 'rust', + dependencies: [], + native: true, +) + +unicode_ident_dep = declare_dependency( + link_with: _unicode_ident_rs, +) + +meson.override_dependency('unicode-ident-1-rs', unicode_ident_dep, native: true) diff --git a/subprojects/proc-macro-error-1-rs.wrap b/subprojects/proc-macro-error-1-rs.wrap new file mode 100644 index 0000000000..b7db03b06a --- /dev/null +++ b/subprojects/proc-macro-error-1-rs.wrap @@ -0,0 +1,7 @@ +[wrap-file] +directory = proc-macro-error-1.0.4 +source_url = https://crates.io/api/v1/crates/proc-macro-error/1.0.4/download +source_filename = proc-macro-error-1.0.4.tar.gz +source_hash = da25490ff9892aab3fcf7c36f08cfb902dd3e71ca0f9f9517bea02a73a5ce38c +#method = cargo +patch_directory = proc-macro-error-1-rs diff --git a/subprojects/proc-macro-error-attr-1-rs.wrap b/subprojects/proc-macro-error-attr-1-rs.wrap new file mode 100644 index 0000000000..d13d8a239a --- /dev/null +++ b/subprojects/proc-macro-error-attr-1-rs.wrap @@ -0,0 +1,7 @@ +[wrap-file] +directory = proc-macro-error-attr-1.0.4 +source_url = https://crates.io/api/v1/crates/proc-macro-error-attr/1.0.4/download +source_filename = proc-macro-error-attr-1.0.4.tar.gz +source_hash = a1be40180e52ecc98ad80b184934baf3d0d29f979574e439af5a55274b35f869 +#method = cargo +patch_directory = proc-macro-error-attr-1-rs diff --git a/subprojects/proc-macro2-1-rs.wrap b/subprojects/proc-macro2-1-rs.wrap new file mode 100644 index 0000000000..7053e2c013 --- /dev/null +++ b/subprojects/proc-macro2-1-rs.wrap @@ -0,0 +1,7 @@ +[wrap-file] +directory = proc-macro2-1.0.84 +source_url = https://crates.io/api/v1/crates/proc-macro2/1.0.84/download +source_filename = proc-macro2-1.0.84.0.tar.gz +source_hash = ec96c6a92621310b51366f1e28d05ef11489516e93be030060e5fc12024a49d6 +#method = cargo +patch_directory = proc-macro2-1-rs diff --git a/subprojects/quote-1-rs.wrap b/subprojects/quote-1-rs.wrap new file mode 100644 index 0000000000..6e7ea69049 --- /dev/null +++ b/subprojects/quote-1-rs.wrap @@ -0,0 +1,7 @@ +[wrap-file] +directory = quote-1.0.36 +source_url = https://crates.io/api/v1/crates/quote/1.0.36/download +source_filename = quote-1.0.36.0.tar.gz +source_hash = 0fa76aaf39101c457836aec0ce2316dbdc3ab723cdda1c6bd4e6ad4208acaca7 +#method = cargo +patch_directory = quote-1-rs diff --git a/subprojects/syn-2-rs.wrap b/subprojects/syn-2-rs.wrap new file mode 100644 index 0000000000..13ffdac3c3 --- /dev/null +++ b/subprojects/syn-2-rs.wrap @@ -0,0 +1,7 @@ +[wrap-file] +directory = syn-2.0.66 +source_url = https://crates.io/api/v1/crates/syn/2.0.66/download +source_filename = syn-2.0.66.0.tar.gz +source_hash = c42f3f41a2de00b01c0aaad383c5a45241efc8b2d1eda5661812fda5f3cdcff5 +#method = cargo +patch_directory = syn-2-rs diff --git a/subprojects/unicode-ident-1-rs.wrap b/subprojects/unicode-ident-1-rs.wrap new file mode 100644 index 0000000000..4609f96ed9 --- /dev/null +++ b/subprojects/unicode-ident-1-rs.wrap @@ -0,0 +1,7 @@ +[wrap-file] +directory = unicode-ident-1.0.12 +source_url = https://crates.io/api/v1/crates/unicode-ident/1.0.12/download +source_filename = unicode-ident-1.0.12.tar.gz +source_hash = 3354b9ac3fae1ff6755cb6db53683adb661634f67557942dea4facebec0fee4b +#method = cargo +patch_directory = unicode-ident-1-rs