@@ -140,6 +140,7 @@ static uint64_t aspeed_i2c_bus_old_read(AspeedI2CBus *bus, hwaddr offset,
static uint64_t aspeed_i2c_bus_new_read(AspeedI2CBus *bus, hwaddr offset,
unsigned size)
{
+ AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
uint64_t value = bus->regs[offset / sizeof(*bus->regs)];
switch (offset) {
@@ -170,6 +171,16 @@ static uint64_t aspeed_i2c_bus_new_read(AspeedI2CBus *bus, hwaddr offset,
case A_I2CM_CMD:
value = SHARED_FIELD_DP32(value, BUS_BUSY_STS, i2c_bus_busy(bus->bus));
break;
+ case A_I2CM_DMA_TX_ADDR_HI:
+ case A_I2CM_DMA_RX_ADDR_HI:
+ case A_I2CS_DMA_TX_ADDR_HI:
+ case A_I2CS_DMA_RX_ADDR_HI:
+ if (!aic->has_dma64) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
+ __func__);
+ value = -1;
+ }
+ break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset);
@@ -731,6 +742,42 @@ static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus, hwaddr offset,
qemu_log_mask(LOG_UNIMP, "%s: Slave mode DMA TX is not implemented\n",
__func__);
break;
+
+ case A_I2CM_DMA_TX_ADDR_HI:
+ if (!aic->has_dma64) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
+ __func__);
+ break;
+ }
+ bus->regs[R_I2CM_DMA_TX_ADDR_HI] = FIELD_EX32(value,
+ I2CM_DMA_TX_ADDR_HI,
+ ADDR_HI);
+ break;
+ case A_I2CM_DMA_RX_ADDR_HI:
+ if (!aic->has_dma64) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
+ __func__);
+ break;
+ }
+ bus->regs[R_I2CM_DMA_RX_ADDR_HI] = FIELD_EX32(value,
+ I2CM_DMA_RX_ADDR_HI,
+ ADDR_HI);
+ break;
+ case A_I2CS_DMA_TX_ADDR_HI:
+ qemu_log_mask(LOG_UNIMP,
+ "%s: Slave mode DMA TX Addr high is not implemented\n",
+ __func__);
+ break;
+ case A_I2CS_DMA_RX_ADDR_HI:
+ if (!aic->has_dma64) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
+ __func__);
+ break;
+ }
+ bus->regs[R_I2CS_DMA_RX_ADDR_HI] = FIELD_EX32(value,
+ I2CS_DMA_RX_ADDR_HI,
+ ADDR_HI);
+ break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
@@ -1554,6 +1601,7 @@ static void aspeed_2700_i2c_class_init(ObjectClass *klass, void *data)
aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base;
aic->has_dma = true;
aic->mem_size = 0x2000;
+ aic->has_dma64 = true;
}
static const TypeInfo aspeed_2700_i2c_info = {
@@ -38,7 +38,7 @@ OBJECT_DECLARE_TYPE(AspeedI2CState, AspeedI2CClass, ASPEED_I2C)
#define ASPEED_I2C_SHARE_POOL_SIZE 0x800
#define ASPEED_I2C_BUS_POOL_SIZE 0x20
#define ASPEED_I2C_OLD_NUM_REG 11
-#define ASPEED_I2C_NEW_NUM_REG 22
+#define ASPEED_I2C_NEW_NUM_REG 28
#define A_I2CD_M_STOP_CMD BIT(5)
#define A_I2CD_M_RX_CMD BIT(3)
@@ -227,6 +227,15 @@ REG32(I2CS_DMA_LEN_STS, 0x4c)
FIELD(I2CS_DMA_LEN_STS, TX_LEN, 0, 13)
REG32(I2CC_DMA_ADDR, 0x50)
REG32(I2CC_DMA_LEN, 0x54)
+/* DMA 64bits */
+REG32(I2CM_DMA_TX_ADDR_HI, 0x60)
+ FIELD(I2CM_DMA_TX_ADDR_HI, ADDR_HI, 0, 7)
+REG32(I2CM_DMA_RX_ADDR_HI, 0x64)
+ FIELD(I2CM_DMA_RX_ADDR_HI, ADDR_HI, 0, 7)
+REG32(I2CS_DMA_TX_ADDR_HI, 0x68)
+ FIELD(I2CS_DMA_TX_ADDR_HI, ADDR_HI, 0, 7)
+REG32(I2CS_DMA_RX_ADDR_HI, 0x6c)
+ FIELD(I2CS_DMA_RX_ADDR_HI, ADDR_HI, 0, 7)
struct AspeedI2CState;
@@ -292,6 +301,7 @@ struct AspeedI2CClass {
bool has_dma;
bool has_share_pool;
uint64_t mem_size;
+ bool has_dma64;
};
static inline bool aspeed_i2c_is_new_mode(AspeedI2CState *s)
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35) and the base address of dram is "0x4 00000000" which is 64bits address. It has "Master DMA Mode Tx Buffer Base Address[39:32](0x60)" and "Master DMA Mode Rx Buffer Base Address[39:32](0x64)" registers to save the high part physical address of Tx/Rx buffer address for master mode. It has "Slave DMA Mode Tx Buffer Base Address[39:32](0x68)" and "Slave DMA Mode Rx Buffer Base Address[39:32](0x6C)" registers to save the high part physical address of Tx/Rx buffer address for slave mode. Ex: Tx buffer address for master mode [39:0] The "Master DMA Mode Tx Buffer Base Address[39:32](0x60)" bits [7:0] which corresponds the bits [39:32] of the 64 bits address of the Tx buffer address. The "Master DMA Mode Tx Buffer Base Address(0x30)" bits [31:0] which corresponds the bits [31:0] of the 64 bits address of the Tx buffer address. Introduce a new has_dma64 class attribute and new registers for the new mode to support DMA 64 bits dram address. Update new mode register number to 28. The aspeed_i2c_bus_vmstate is changed again and version is not increased because it was done earlier in the same series. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> --- hw/i2c/aspeed_i2c.c | 48 +++++++++++++++++++++++++++++++++++++ include/hw/i2c/aspeed_i2c.h | 12 +++++++++- 2 files changed, 59 insertions(+), 1 deletion(-)