diff mbox series

hw/loongarch: virt: support up to 4 serial ports

Message ID 20240906044944.2427297-1-Jason@zx2c4.com (mailing list archive)
State New
Headers show
Series hw/loongarch: virt: support up to 4 serial ports | expand

Commit Message

Jason A. Donenfeld Sept. 6, 2024, 4:49 a.m. UTC 
In order to support additional channels of communication using
`-serial`, add several serial ports, up to the standard 4 generally
supported by the 8250 driver.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 hw/loongarch/virt.c        | 24 ++++++++++++++----------
 include/hw/pci-host/ls7a.h |  9 +++++----
 2 files changed, 19 insertions(+), 14 deletions(-)

Comments

maobibo Sept. 6, 2024, 8:34 a.m. UTC | #1 
On 2024/9/6 下午12:49, Jason A. Donenfeld wrote:
> In order to support additional channels of communication using
> `-serial`, add several serial ports, up to the standard 4 generally
> supported by the 8250 driver.
> 
> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> ---
>   hw/loongarch/virt.c        | 24 ++++++++++++++----------
>   include/hw/pci-host/ls7a.h |  9 +++++----
>   2 files changed, 19 insertions(+), 14 deletions(-)
> 
> diff --git a/hw/loongarch/virt.c b/hw/loongarch/virt.c
> index 4151fc5e0c..155678b684 100644
> --- a/hw/loongarch/virt.c
> +++ b/hw/loongarch/virt.c
> @@ -319,10 +319,10 @@ static void fdt_add_ged_reset(LoongArchVirtMachineState *lvms)
>   }
>   
>   static void fdt_add_uart_node(LoongArchVirtMachineState *lvms,
> -                              uint32_t *pch_pic_phandle)
> +                              uint32_t *pch_pic_phandle, hwaddr base,
> +                              int irq, bool chosen)
>   {
>       char *nodename;
> -    hwaddr base = VIRT_UART_BASE;
>       hwaddr size = VIRT_UART_SIZE;
>       MachineState *ms = MACHINE(lvms);
>   
> @@ -331,9 +331,9 @@ static void fdt_add_uart_node(LoongArchVirtMachineState *lvms,
>       qemu_fdt_setprop_string(ms->fdt, nodename, "compatible", "ns16550a");
>       qemu_fdt_setprop_cells(ms->fdt, nodename, "reg", 0x0, base, 0x0, size);
>       qemu_fdt_setprop_cell(ms->fdt, nodename, "clock-frequency", 100000000);
> -    qemu_fdt_setprop_string(ms->fdt, "/chosen", "stdout-path", nodename);
> -    qemu_fdt_setprop_cells(ms->fdt, nodename, "interrupts",
> -                           VIRT_UART_IRQ - VIRT_GSI_BASE, 0x4);
> +    if (chosen)
> +        qemu_fdt_setprop_string(ms->fdt, "/chosen", "stdout-path", nodename);
> +    qemu_fdt_setprop_cells(ms->fdt, nodename, "interrupts", irq, 0x4);
>       qemu_fdt_setprop_cell(ms->fdt, nodename, "interrupt-parent",
>                             *pch_pic_phandle);
>       g_free(nodename);
> @@ -750,11 +750,15 @@ static void virt_devices_init(DeviceState *pch_pic,
>       /* Add pcie node */
>       fdt_add_pcie_node(lvms, pch_pic_phandle, pch_msi_phandle);
>   
> -    serial_mm_init(get_system_memory(), VIRT_UART_BASE, 0,
> -                   qdev_get_gpio_in(pch_pic,
> -                                    VIRT_UART_IRQ - VIRT_GSI_BASE),
> -                   115200, serial_hd(0), DEVICE_LITTLE_ENDIAN);
> -    fdt_add_uart_node(lvms, pch_pic_phandle);
> +    for (i = 0; i < VIRT_UART_COUNT; ++i) {
How about adding serial_hd(i) checking here, such as
   for (i = 0; (i < VIRT_UART_COUNT) && serial_hd(i); ++i) {

> +        hwaddr base = VIRT_UART_BASE + i * VIRT_UART_SIZE;
> +        int irq = VIRT_UART_IRQ + i - VIRT_GSI_BASE;
> +        serial_mm_init(get_system_memory(), base, 0,
> +                       qdev_get_gpio_in(pch_pic, irq),
> +                       115200, serial_hd(VIRT_UART_COUNT - 1 - i),
is it serial_hd(i) here rather than serial_hd(VIRT_UART_COUNT - 1 - i)? 
In general serial_hd(0) is default serial.

> +                       DEVICE_LITTLE_ENDIAN);
> +        fdt_add_uart_node(lvms, pch_pic_phandle, base, irq, i == 0);
> +    }
>   
>       /* Network init */
>       pci_init_nic_devices(pci_bus, mc->default_nic);
> diff --git a/include/hw/pci-host/ls7a.h b/include/hw/pci-host/ls7a.h
> index cd7c9ec7bc..79d4ea8501 100644
> --- a/include/hw/pci-host/ls7a.h
> +++ b/include/hw/pci-host/ls7a.h
> @@ -36,17 +36,18 @@
>   #define VIRT_PCH_PIC_IRQ_NUM     32
>   #define VIRT_GSI_BASE            64
>   #define VIRT_DEVICE_IRQS         16
> +#define VIRT_UART_COUNT          4
>   #define VIRT_UART_IRQ            (VIRT_GSI_BASE + 2)
>   #define VIRT_UART_BASE           0x1fe001e0
> -#define VIRT_UART_SIZE           0X100
> -#define VIRT_RTC_IRQ             (VIRT_GSI_BASE + 3)
> +#define VIRT_UART_SIZE           0x100
> +#define VIRT_RTC_IRQ             (VIRT_GSI_BASE + 6)
>   #define VIRT_MISC_REG_BASE       (VIRT_PCH_REG_BASE + 0x00080000)
>   #define VIRT_RTC_REG_BASE        (VIRT_MISC_REG_BASE + 0x00050100)
>   #define VIRT_RTC_LEN             0x100
> -#define VIRT_SCI_IRQ             (VIRT_GSI_BASE + 4)
> +#define VIRT_SCI_IRQ             (VIRT_GSI_BASE + 7)
>   
>   #define VIRT_PLATFORM_BUS_BASEADDRESS   0x16000000
>   #define VIRT_PLATFORM_BUS_SIZE          0x2000000
>   #define VIRT_PLATFORM_BUS_NUM_IRQS      2
> -#define VIRT_PLATFORM_BUS_IRQ           (VIRT_GSI_BASE + 5)
> +#define VIRT_PLATFORM_BUS_IRQ           (VIRT_GSI_BASE + 8)
>   #endif
> 
By the way, serial port for acpi table should be refreshed also, such as
diff --git a/hw/loongarch/acpi-build.c b/hw/loongarch/acpi-build.c
index 2638f87434..5bd2a9beaa 100644
--- a/hw/loongarch/acpi-build.c
+++ b/hw/loongarch/acpi-build.c
@@ -31,6 +31,7 @@

  #include "hw/acpi/generic_event_device.h"
  #include "hw/pci-host/gpex.h"
+#include "sysemu/sysemu.h"
  #include "sysemu/tpm.h"
  #include "hw/platform-bus.h"
  #include "hw/acpi/aml-build.h"
@@ -252,23 +253,26 @@ struct AcpiBuildState {
      MemoryRegion *linker_mr;
  } AcpiBuildState;

-static void build_uart_device_aml(Aml *table)
+static void build_uart_device_aml(Aml *table, int index)
  {
      Aml *dev;
      Aml *crs;
      Aml *pkg0, *pkg1, *pkg2;
-    uint32_t uart_irq = VIRT_UART_IRQ;
+    uint32_t uart_irq;
+    uint64_t base;

+    uart_irq = VIRT_UART_IRQ + index;
+    base = VIRT_UART_BASE + index * VIRT_UART_SIZE;
      Aml *scope = aml_scope("_SB");
-    dev = aml_device("COMA");
+    dev = aml_device("COM%d", index);
      aml_append(dev, aml_name_decl("_HID", aml_string("PNP0501")));
-    aml_append(dev, aml_name_decl("_UID", aml_int(0)));
+    aml_append(dev, aml_name_decl("_UID", aml_int(index)));
      aml_append(dev, aml_name_decl("_CCA", aml_int(1)));
      crs = aml_resource_template();
      aml_append(crs,
          aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED,
                           AML_NON_CACHEABLE, AML_READ_WRITE,
-                         0, VIRT_UART_BASE, VIRT_UART_BASE + 
VIRT_UART_SIZE - 1,
+                         0, base, base + VIRT_UART_SIZE - 1,
                           0, VIRT_UART_SIZE));
      aml_append(crs, aml_interrupt(AML_CONSUMER, AML_LEVEL, 
AML_ACTIVE_HIGH,
                                    AML_SHARED, &uart_irq, 1));
@@ -405,10 +409,13 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, 
MachineState *machine)
      LoongArchVirtMachineState *lvms = LOONGARCH_VIRT_MACHINE(machine);
      AcpiTable table = { .sig = "DSDT", .rev = 1, .oem_id = lvms->oem_id,
                          .oem_table_id = lvms->oem_table_id };
+    int i;

      acpi_table_begin(&table, table_data);
      dsdt = init_aml_allocator();
-    build_uart_device_aml(dsdt);
+    for (i = 0; (i < VIRT_UART_COUNT) && serial_hd(i); i++) {
+        build_uart_device_aml(dsdt, i);
+    }
      build_pci_device_aml(dsdt, lvms);
      build_la_ged_aml(dsdt, machine);
      build_flash_aml(dsdt, lvms);


Regards
Bibo Mao
Jason A. Donenfeld Sept. 6, 2024, 2:30 p.m. UTC | #2 
On Fri, Sep 06, 2024 at 04:34:53PM +0800, maobibo wrote:
> > +    for (i = 0; i < VIRT_UART_COUNT; ++i) {
> How about adding serial_hd(i) checking here, such as
>    for (i = 0; (i < VIRT_UART_COUNT) && serial_hd(i); ++i) {

That doesn't seem to do anything, unfortunately.

> 
> > +        hwaddr base = VIRT_UART_BASE + i * VIRT_UART_SIZE;
> > +        int irq = VIRT_UART_IRQ + i - VIRT_GSI_BASE;
> > +        serial_mm_init(get_system_memory(), base, 0,
> > +                       qdev_get_gpio_in(pch_pic, irq),
> > +                       115200, serial_hd(VIRT_UART_COUNT - 1 - i),
> is it serial_hd(i) here rather than serial_hd(VIRT_UART_COUNT - 1 - i)? 
> In general serial_hd(0) is default serial.

They've got to be added in reverse order. The chosen calculation needed
to be fixed though, in the line below:

> > +        fdt_add_uart_node(lvms, pch_pic_phandle, base, irq, i == 0);

That now checks for the last index.

> By the way, serial port for acpi table should be refreshed also, such as

Thanks. Will send you a v2.

Jason
diff mbox series

Patch

diff --git a/hw/loongarch/virt.c b/hw/loongarch/virt.c
index 4151fc5e0c..155678b684 100644
--- a/hw/loongarch/virt.c
+++ b/hw/loongarch/virt.c
@@ -319,10 +319,10 @@  static void fdt_add_ged_reset(LoongArchVirtMachineState *lvms)
 }
 
 static void fdt_add_uart_node(LoongArchVirtMachineState *lvms,
-                              uint32_t *pch_pic_phandle)
+                              uint32_t *pch_pic_phandle, hwaddr base,
+                              int irq, bool chosen)
 {
     char *nodename;
-    hwaddr base = VIRT_UART_BASE;
     hwaddr size = VIRT_UART_SIZE;
     MachineState *ms = MACHINE(lvms);
 
@@ -331,9 +331,9 @@  static void fdt_add_uart_node(LoongArchVirtMachineState *lvms,
     qemu_fdt_setprop_string(ms->fdt, nodename, "compatible", "ns16550a");
     qemu_fdt_setprop_cells(ms->fdt, nodename, "reg", 0x0, base, 0x0, size);
     qemu_fdt_setprop_cell(ms->fdt, nodename, "clock-frequency", 100000000);
-    qemu_fdt_setprop_string(ms->fdt, "/chosen", "stdout-path", nodename);
-    qemu_fdt_setprop_cells(ms->fdt, nodename, "interrupts",
-                           VIRT_UART_IRQ - VIRT_GSI_BASE, 0x4);
+    if (chosen)
+        qemu_fdt_setprop_string(ms->fdt, "/chosen", "stdout-path", nodename);
+    qemu_fdt_setprop_cells(ms->fdt, nodename, "interrupts", irq, 0x4);
     qemu_fdt_setprop_cell(ms->fdt, nodename, "interrupt-parent",
                           *pch_pic_phandle);
     g_free(nodename);
@@ -750,11 +750,15 @@  static void virt_devices_init(DeviceState *pch_pic,
     /* Add pcie node */
     fdt_add_pcie_node(lvms, pch_pic_phandle, pch_msi_phandle);
 
-    serial_mm_init(get_system_memory(), VIRT_UART_BASE, 0,
-                   qdev_get_gpio_in(pch_pic,
-                                    VIRT_UART_IRQ - VIRT_GSI_BASE),
-                   115200, serial_hd(0), DEVICE_LITTLE_ENDIAN);
-    fdt_add_uart_node(lvms, pch_pic_phandle);
+    for (i = 0; i < VIRT_UART_COUNT; ++i) {
+        hwaddr base = VIRT_UART_BASE + i * VIRT_UART_SIZE;
+        int irq = VIRT_UART_IRQ + i - VIRT_GSI_BASE;
+        serial_mm_init(get_system_memory(), base, 0,
+                       qdev_get_gpio_in(pch_pic, irq),
+                       115200, serial_hd(VIRT_UART_COUNT - 1 - i),
+                       DEVICE_LITTLE_ENDIAN);
+        fdt_add_uart_node(lvms, pch_pic_phandle, base, irq, i == 0);
+    }
 
     /* Network init */
     pci_init_nic_devices(pci_bus, mc->default_nic);
diff --git a/include/hw/pci-host/ls7a.h b/include/hw/pci-host/ls7a.h
index cd7c9ec7bc..79d4ea8501 100644
--- a/include/hw/pci-host/ls7a.h
+++ b/include/hw/pci-host/ls7a.h
@@ -36,17 +36,18 @@ 
 #define VIRT_PCH_PIC_IRQ_NUM     32
 #define VIRT_GSI_BASE            64
 #define VIRT_DEVICE_IRQS         16
+#define VIRT_UART_COUNT          4
 #define VIRT_UART_IRQ            (VIRT_GSI_BASE + 2)
 #define VIRT_UART_BASE           0x1fe001e0
-#define VIRT_UART_SIZE           0X100
-#define VIRT_RTC_IRQ             (VIRT_GSI_BASE + 3)
+#define VIRT_UART_SIZE           0x100
+#define VIRT_RTC_IRQ             (VIRT_GSI_BASE + 6)
 #define VIRT_MISC_REG_BASE       (VIRT_PCH_REG_BASE + 0x00080000)
 #define VIRT_RTC_REG_BASE        (VIRT_MISC_REG_BASE + 0x00050100)
 #define VIRT_RTC_LEN             0x100
-#define VIRT_SCI_IRQ             (VIRT_GSI_BASE + 4)
+#define VIRT_SCI_IRQ             (VIRT_GSI_BASE + 7)
 
 #define VIRT_PLATFORM_BUS_BASEADDRESS   0x16000000
 #define VIRT_PLATFORM_BUS_SIZE          0x2000000
 #define VIRT_PLATFORM_BUS_NUM_IRQS      2
-#define VIRT_PLATFORM_BUS_IRQ           (VIRT_GSI_BASE + 5)
+#define VIRT_PLATFORM_BUS_IRQ           (VIRT_GSI_BASE + 8)
 #endif