diff mbox series

[PULL,23/27] hw/net/can/xlnx-versal-canfd: Fix FIFO issues

Message ID 20240913151411.2167922-24-peter.maydell@linaro.org (mailing list archive)
State New, archived
Headers show
Series [PULL,01/27] hw/s390/ccw-device: Convert to three-phase reset | expand

Commit Message

Peter Maydell Sept. 13, 2024, 3:14 p.m. UTC 
From: Doug Brown <doug@schmorgal.com>

The read index should not be changed when storing a new message into the
RX or TX FIFO. Changing it at this point will cause the reader to get
out of sync. The wrapping of the read index is already handled by the
pre-write functions for the FIFO status registers anyway.

Additionally, the calculation for wrapping the store index was off by
one, which caused new messages to be written to the wrong location in
the FIFO. This caused incorrect messages to be delivered.

Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240827034927.66659-8-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/can/xlnx-versal-canfd.c | 36 +++-------------------------------
 1 file changed, 3 insertions(+), 33 deletions(-)
diff mbox series

Patch

diff --git a/hw/net/can/xlnx-versal-canfd.c b/hw/net/can/xlnx-versal-canfd.c
index ccfed364cc9..e148bd7b465 100644
--- a/hw/net/can/xlnx-versal-canfd.c
+++ b/hw/net/can/xlnx-versal-canfd.c
@@ -1144,18 +1144,8 @@  static void update_rx_sequential(XlnxVersalCANFDState *s,
             read_index = ARRAY_FIELD_EX32(s->regs, RX_FIFO_STATUS_REGISTER, RI);
             store_index = read_index + fill_level;
 
-            if (read_index == s->cfg.rx0_fifo - 1) {
-                /*
-                 * When ri is s->cfg.rx0_fifo - 1 i.e. max, it goes cyclic that
-                 * means we reset the ri to 0x0.
-                 */
-                read_index = 0;
-                ARRAY_FIELD_DP32(s->regs, RX_FIFO_STATUS_REGISTER, RI,
-                                 read_index);
-            }
-
             if (store_index > s->cfg.rx0_fifo - 1) {
-                store_index -= s->cfg.rx0_fifo - 1;
+                store_index -= s->cfg.rx0_fifo;
             }
 
             store_location = R_RB_ID_REGISTER +
@@ -1172,18 +1162,8 @@  static void update_rx_sequential(XlnxVersalCANFDState *s,
                                           RI_1);
             store_index = read_index + fill_level;
 
-            if (read_index == s->cfg.rx1_fifo - 1) {
-                /*
-                 * When ri is s->cfg.rx1_fifo - 1 i.e. max, it goes cyclic that
-                 * means we reset the ri to 0x0.
-                 */
-                read_index = 0;
-                ARRAY_FIELD_DP32(s->regs, RX_FIFO_STATUS_REGISTER, RI_1,
-                                 read_index);
-            }
-
             if (store_index > s->cfg.rx1_fifo - 1) {
-                store_index -= s->cfg.rx1_fifo - 1;
+                store_index -= s->cfg.rx1_fifo;
             }
 
             store_location = R_RB_ID_REGISTER_1 +
@@ -1265,18 +1245,8 @@  static void tx_fifo_stamp(XlnxVersalCANFDState *s, uint32_t tb0_regid)
                           " Discarding the message\n");
             ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXEOFLW, 1);
         } else {
-            if (read_index == s->cfg.tx_fifo - 1) {
-                /*
-                 * When ri is s->cfg.tx_fifo - 1 i.e. max, it goes cyclic that
-                 * means we reset the ri to 0x0.
-                 */
-                read_index = 0;
-                ARRAY_FIELD_DP32(s->regs, TX_EVENT_FIFO_STATUS_REGISTER, TXE_RI,
-                                 read_index);
-            }
-
             if (store_index > s->cfg.tx_fifo - 1) {
-                store_index -= s->cfg.tx_fifo - 1;
+                store_index -= s->cfg.tx_fifo;
             }
 
             assert(store_index < s->cfg.tx_fifo);