diff --git a/include/hw/usb/hcd-musb.h b/include/hw/usb/hcd-musb.h
deleted file mode 100644
index 4d4b1ec0fc2..00000000000
--- a/include/hw/usb/hcd-musb.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * "Inventra" High-speed Dual-Role Controller (MUSB-HDRC), Mentor Graphics,
- * USB2.0 OTG compliant core used in various chips.
- *
- * Only host-mode and non-DMA accesses are currently supported.
- *
- * Copyright (C) 2008 Nokia Corporation
- * Written by Andrzej Zaborowski <balrog@zabor.org>
- *
- * SPDX-License-Identifier: GPL-2.0-or-later
- */
-
-#ifndef HW_USB_HCD_MUSB_H
-#define HW_USB_HCD_MUSB_H
-
-#include "exec/hwaddr.h"
-
-enum musb_irq_source_e {
-    musb_irq_suspend = 0,
-    musb_irq_resume,
-    musb_irq_rst_babble,
-    musb_irq_sof,
-    musb_irq_connect,
-    musb_irq_disconnect,
-    musb_irq_vbus_request,
-    musb_irq_vbus_error,
-    musb_irq_rx,
-    musb_irq_tx,
-    musb_set_vbus,
-    musb_set_session,
-    /* Add new interrupts here */
-    musb_irq_max /* total number of interrupts defined */
-};
-
-/* TODO convert hcd-musb to QOM/qdev and remove MUSBReadFunc/MUSBWriteFunc */
-typedef void MUSBWriteFunc(void *opaque, hwaddr addr, uint32_t value);
-typedef uint32_t MUSBReadFunc(void *opaque, hwaddr addr);
-extern MUSBReadFunc * const musb_read[];
-extern MUSBWriteFunc * const musb_write[];
-
-typedef struct MUSBState MUSBState;
-
-MUSBState *musb_init(DeviceState *parent_device, int gpio_base);
-void musb_reset(MUSBState *s);
-uint32_t musb_core_intr_get(MUSBState *s);
-void musb_core_intr_clear(MUSBState *s, uint32_t mask);
-void musb_set_size(MUSBState *s, int epnum, int size, int is_tx);
-
-#endif
diff --git a/hw/usb/hcd-musb.c b/hw/usb/hcd-musb.c
deleted file mode 100644
index 6dca373cb1f..00000000000
--- a/hw/usb/hcd-musb.c
+++ /dev/null
@@ -1,1553 +0,0 @@
-/*
- * "Inventra" High-speed Dual-Role Controller (MUSB-HDRC), Mentor Graphics,
- * USB2.0 OTG compliant core used in various chips.
- *
- * Copyright (C) 2008 Nokia Corporation
- * Written by Andrzej Zaborowski <andrew@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 or
- * (at your option) version 3 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Only host-mode and non-DMA accesses are currently supported.
- */
-#include "qemu/osdep.h"
-#include "qemu/timer.h"
-#include "hw/usb.h"
-#include "hw/usb/hcd-musb.h"
-#include "hw/irq.h"
-#include "hw/hw.h"
-
-/* Common USB registers */
-#define MUSB_HDRC_FADDR         0x00    /* 8-bit */
-#define MUSB_HDRC_POWER         0x01    /* 8-bit */
-
-#define MUSB_HDRC_INTRTX        0x02    /* 16-bit */
-#define MUSB_HDRC_INTRRX        0x04
-#define MUSB_HDRC_INTRTXE       0x06
-#define MUSB_HDRC_INTRRXE       0x08
-#define MUSB_HDRC_INTRUSB       0x0a    /* 8 bit */
-#define MUSB_HDRC_INTRUSBE      0x0b    /* 8 bit */
-#define MUSB_HDRC_FRAME         0x0c    /* 16-bit */
-#define MUSB_HDRC_INDEX         0x0e    /* 8 bit */
-#define MUSB_HDRC_TESTMODE      0x0f    /* 8 bit */
-
-/* Per-EP registers in indexed mode */
-#define MUSB_HDRC_EP_IDX        0x10    /* 8-bit */
-
-/* EP FIFOs */
-#define MUSB_HDRC_FIFO          0x20
-
-/* Additional Control Registers */
-#define MUSB_HDRC_DEVCTL        0x60    /* 8 bit */
-
-/* These are indexed */
-#define MUSB_HDRC_TXFIFOSZ      0x62    /* 8 bit (see masks) */
-#define MUSB_HDRC_RXFIFOSZ      0x63    /* 8 bit (see masks) */
-#define MUSB_HDRC_TXFIFOADDR    0x64    /* 16 bit offset shifted right 3 */
-#define MUSB_HDRC_RXFIFOADDR    0x66    /* 16 bit offset shifted right 3 */
-
-/* Some more registers */
-#define MUSB_HDRC_VCTRL         0x68    /* 8 bit */
-#define MUSB_HDRC_HWVERS        0x6c    /* 8 bit */
-
-/* Added in HDRC 1.9(?) & MHDRC 1.4 */
-/* ULPI pass-through */
-#define MUSB_HDRC_ULPI_VBUSCTL  0x70
-#define MUSB_HDRC_ULPI_REGDATA  0x74
-#define MUSB_HDRC_ULPI_REGADDR  0x75
-#define MUSB_HDRC_ULPI_REGCTL   0x76
-
-/* Extended config & PHY control */
-#define MUSB_HDRC_ENDCOUNT      0x78    /* 8 bit */
-#define MUSB_HDRC_DMARAMCFG     0x79    /* 8 bit */
-#define MUSB_HDRC_PHYWAIT       0x7a    /* 8 bit */
-#define MUSB_HDRC_PHYVPLEN      0x7b    /* 8 bit */
-#define MUSB_HDRC_HS_EOF1       0x7c    /* 8 bit, units of 546.1 us */
-#define MUSB_HDRC_FS_EOF1       0x7d    /* 8 bit, units of 533.3 ns */
-#define MUSB_HDRC_LS_EOF1       0x7e    /* 8 bit, units of 1.067 us */
-
-/* Per-EP BUSCTL registers */
-#define MUSB_HDRC_BUSCTL        0x80
-
-/* Per-EP registers in flat mode */
-#define MUSB_HDRC_EP            0x100
-
-/* offsets to registers in flat model */
-#define MUSB_HDRC_TXMAXP        0x00    /* 16 bit apparently */
-#define MUSB_HDRC_TXCSR         0x02    /* 16 bit apparently */
-#define MUSB_HDRC_CSR0          MUSB_HDRC_TXCSR         /* re-used for EP0 */
-#define MUSB_HDRC_RXMAXP        0x04    /* 16 bit apparently */
-#define MUSB_HDRC_RXCSR         0x06    /* 16 bit apparently */
-#define MUSB_HDRC_RXCOUNT       0x08    /* 16 bit apparently */
-#define MUSB_HDRC_COUNT0        MUSB_HDRC_RXCOUNT       /* re-used for EP0 */
-#define MUSB_HDRC_TXTYPE        0x0a    /* 8 bit apparently */
-#define MUSB_HDRC_TYPE0         MUSB_HDRC_TXTYPE        /* re-used for EP0 */
-#define MUSB_HDRC_TXINTERVAL    0x0b    /* 8 bit apparently */
-#define MUSB_HDRC_NAKLIMIT0     MUSB_HDRC_TXINTERVAL    /* re-used for EP0 */
-#define MUSB_HDRC_RXTYPE        0x0c    /* 8 bit apparently */
-#define MUSB_HDRC_RXINTERVAL    0x0d    /* 8 bit apparently */
-#define MUSB_HDRC_FIFOSIZE      0x0f    /* 8 bit apparently */
-#define MUSB_HDRC_CONFIGDATA    MGC_O_HDRC_FIFOSIZE     /* re-used for EP0 */
-
-/* "Bus control" registers */
-#define MUSB_HDRC_TXFUNCADDR    0x00
-#define MUSB_HDRC_TXHUBADDR     0x02
-#define MUSB_HDRC_TXHUBPORT     0x03
-
-#define MUSB_HDRC_RXFUNCADDR    0x04
-#define MUSB_HDRC_RXHUBADDR     0x06
-#define MUSB_HDRC_RXHUBPORT     0x07
-
-/*
- * MUSBHDRC Register bit masks
- */
-
-/* POWER */
-#define MGC_M_POWER_ISOUPDATE           0x80
-#define MGC_M_POWER_SOFTCONN            0x40
-#define MGC_M_POWER_HSENAB              0x20
-#define MGC_M_POWER_HSMODE              0x10
-#define MGC_M_POWER_RESET               0x08
-#define MGC_M_POWER_RESUME              0x04
-#define MGC_M_POWER_SUSPENDM            0x02
-#define MGC_M_POWER_ENSUSPEND           0x01
-
-/* INTRUSB */
-#define MGC_M_INTR_SUSPEND              0x01
-#define MGC_M_INTR_RESUME               0x02
-#define MGC_M_INTR_RESET                0x04
-#define MGC_M_INTR_BABBLE               0x04
-#define MGC_M_INTR_SOF                  0x08
-#define MGC_M_INTR_CONNECT              0x10
-#define MGC_M_INTR_DISCONNECT           0x20
-#define MGC_M_INTR_SESSREQ              0x40
-#define MGC_M_INTR_VBUSERROR            0x80    /* FOR SESSION END */
-#define MGC_M_INTR_EP0                  0x01    /* FOR EP0 INTERRUPT */
-
-/* DEVCTL */
-#define MGC_M_DEVCTL_BDEVICE            0x80
-#define MGC_M_DEVCTL_FSDEV              0x40
-#define MGC_M_DEVCTL_LSDEV              0x20
-#define MGC_M_DEVCTL_VBUS               0x18
-#define MGC_S_DEVCTL_VBUS               3
-#define MGC_M_DEVCTL_HM                 0x04
-#define MGC_M_DEVCTL_HR                 0x02
-#define MGC_M_DEVCTL_SESSION            0x01
-
-/* TESTMODE */
-#define MGC_M_TEST_FORCE_HOST           0x80
-#define MGC_M_TEST_FIFO_ACCESS          0x40
-#define MGC_M_TEST_FORCE_FS             0x20
-#define MGC_M_TEST_FORCE_HS             0x10
-#define MGC_M_TEST_PACKET               0x08
-#define MGC_M_TEST_K                    0x04
-#define MGC_M_TEST_J                    0x02
-#define MGC_M_TEST_SE0_NAK              0x01
-
-/* CSR0 */
-#define MGC_M_CSR0_FLUSHFIFO            0x0100
-#define MGC_M_CSR0_TXPKTRDY             0x0002
-#define MGC_M_CSR0_RXPKTRDY             0x0001
-
-/* CSR0 in Peripheral mode */
-#define MGC_M_CSR0_P_SVDSETUPEND        0x0080
-#define MGC_M_CSR0_P_SVDRXPKTRDY        0x0040
-#define MGC_M_CSR0_P_SENDSTALL          0x0020
-#define MGC_M_CSR0_P_SETUPEND           0x0010
-#define MGC_M_CSR0_P_DATAEND            0x0008
-#define MGC_M_CSR0_P_SENTSTALL          0x0004
-
-/* CSR0 in Host mode */
-#define MGC_M_CSR0_H_NO_PING            0x0800
-#define MGC_M_CSR0_H_WR_DATATOGGLE      0x0400  /* set to allow setting: */
-#define MGC_M_CSR0_H_DATATOGGLE         0x0200  /* data toggle control */
-#define MGC_M_CSR0_H_NAKTIMEOUT         0x0080
-#define MGC_M_CSR0_H_STATUSPKT          0x0040
-#define MGC_M_CSR0_H_REQPKT             0x0020
-#define MGC_M_CSR0_H_ERROR              0x0010
-#define MGC_M_CSR0_H_SETUPPKT           0x0008
-#define MGC_M_CSR0_H_RXSTALL            0x0004
-
-/* CONFIGDATA */
-#define MGC_M_CONFIGDATA_MPRXE          0x80    /* auto bulk pkt combining */
-#define MGC_M_CONFIGDATA_MPTXE          0x40    /* auto bulk pkt splitting */
-#define MGC_M_CONFIGDATA_BIGENDIAN      0x20
-#define MGC_M_CONFIGDATA_HBRXE          0x10    /* HB-ISO for RX */
-#define MGC_M_CONFIGDATA_HBTXE          0x08    /* HB-ISO for TX */
-#define MGC_M_CONFIGDATA_DYNFIFO        0x04    /* dynamic FIFO sizing */
-#define MGC_M_CONFIGDATA_SOFTCONE       0x02    /* SoftConnect */
-#define MGC_M_CONFIGDATA_UTMIDW         0x01    /* Width, 0 => 8b, 1 => 16b */
-
-/* TXCSR in Peripheral and Host mode */
-#define MGC_M_TXCSR_AUTOSET             0x8000
-#define MGC_M_TXCSR_ISO                 0x4000
-#define MGC_M_TXCSR_MODE                0x2000
-#define MGC_M_TXCSR_DMAENAB             0x1000
-#define MGC_M_TXCSR_FRCDATATOG          0x0800
-#define MGC_M_TXCSR_DMAMODE             0x0400
-#define MGC_M_TXCSR_CLRDATATOG          0x0040
-#define MGC_M_TXCSR_FLUSHFIFO           0x0008
-#define MGC_M_TXCSR_FIFONOTEMPTY        0x0002
-#define MGC_M_TXCSR_TXPKTRDY            0x0001
-
-/* TXCSR in Peripheral mode */
-#define MGC_M_TXCSR_P_INCOMPTX          0x0080
-#define MGC_M_TXCSR_P_SENTSTALL         0x0020
-#define MGC_M_TXCSR_P_SENDSTALL         0x0010
-#define MGC_M_TXCSR_P_UNDERRUN          0x0004
-
-/* TXCSR in Host mode */
-#define MGC_M_TXCSR_H_WR_DATATOGGLE     0x0200
-#define MGC_M_TXCSR_H_DATATOGGLE        0x0100
-#define MGC_M_TXCSR_H_NAKTIMEOUT        0x0080
-#define MGC_M_TXCSR_H_RXSTALL           0x0020
-#define MGC_M_TXCSR_H_ERROR             0x0004
-
-/* RXCSR in Peripheral and Host mode */
-#define MGC_M_RXCSR_AUTOCLEAR           0x8000
-#define MGC_M_RXCSR_DMAENAB             0x2000
-#define MGC_M_RXCSR_DISNYET             0x1000
-#define MGC_M_RXCSR_DMAMODE             0x0800
-#define MGC_M_RXCSR_INCOMPRX            0x0100
-#define MGC_M_RXCSR_CLRDATATOG          0x0080
-#define MGC_M_RXCSR_FLUSHFIFO           0x0010
-#define MGC_M_RXCSR_DATAERROR           0x0008
-#define MGC_M_RXCSR_FIFOFULL            0x0002
-#define MGC_M_RXCSR_RXPKTRDY            0x0001
-
-/* RXCSR in Peripheral mode */
-#define MGC_M_RXCSR_P_ISO               0x4000
-#define MGC_M_RXCSR_P_SENTSTALL         0x0040
-#define MGC_M_RXCSR_P_SENDSTALL         0x0020
-#define MGC_M_RXCSR_P_OVERRUN           0x0004
-
-/* RXCSR in Host mode */
-#define MGC_M_RXCSR_H_AUTOREQ           0x4000
-#define MGC_M_RXCSR_H_WR_DATATOGGLE     0x0400
-#define MGC_M_RXCSR_H_DATATOGGLE        0x0200
-#define MGC_M_RXCSR_H_RXSTALL           0x0040
-#define MGC_M_RXCSR_H_REQPKT            0x0020
-#define MGC_M_RXCSR_H_ERROR             0x0004
-
-/* HUBADDR */
-#define MGC_M_HUBADDR_MULTI_TT          0x80
-
-/* ULPI: Added in HDRC 1.9(?) & MHDRC 1.4 */
-#define MGC_M_ULPI_VBCTL_USEEXTVBUSIND  0x02
-#define MGC_M_ULPI_VBCTL_USEEXTVBUS     0x01
-#define MGC_M_ULPI_REGCTL_INT_ENABLE    0x08
-#define MGC_M_ULPI_REGCTL_READNOTWRITE  0x04
-#define MGC_M_ULPI_REGCTL_COMPLETE      0x02
-#define MGC_M_ULPI_REGCTL_REG           0x01
-
-/* #define MUSB_DEBUG */
-
-#ifdef MUSB_DEBUG
-#define TRACE(fmt, ...) fprintf(stderr, "%s@%d: " fmt "\n", __func__, \
-                                __LINE__, ##__VA_ARGS__)
-#else
-#define TRACE(...)
-#endif
-
-
-static void musb_attach(USBPort *port);
-static void musb_detach(USBPort *port);
-static void musb_child_detach(USBPort *port, USBDevice *child);
-static void musb_schedule_cb(USBPort *port, USBPacket *p);
-static void musb_async_cancel_device(MUSBState *s, USBDevice *dev);
-
-static USBPortOps musb_port_ops = {
-    .attach = musb_attach,
-    .detach = musb_detach,
-    .child_detach = musb_child_detach,
-    .complete = musb_schedule_cb,
-};
-
-static USBBusOps musb_bus_ops = {
-};
-
-typedef struct MUSBPacket MUSBPacket;
-typedef struct MUSBEndPoint MUSBEndPoint;
-
-struct MUSBPacket {
-    USBPacket p;
-    MUSBEndPoint *ep;
-    int dir;
-};
-
-struct MUSBEndPoint {
-    uint16_t faddr[2];
-    uint8_t haddr[2];
-    uint8_t hport[2];
-    uint16_t csr[2];
-    uint16_t maxp[2];
-    uint16_t rxcount;
-    uint8_t type[2];
-    uint8_t interval[2];
-    uint8_t config;
-    uint8_t fifosize;
-    int timeout[2];     /* Always in microframes */
-
-    uint8_t *buf[2];
-    int fifolen[2];
-    int fifostart[2];
-    int fifoaddr[2];
-    MUSBPacket packey[2];
-    int status[2];
-    int ext_size[2];
-
-    /* For callbacks' use */
-    int epnum;
-    int interrupt[2];
-    MUSBState *musb;
-    USBCallback *delayed_cb[2];
-    QEMUTimer *intv_timer[2];
-};
-
-struct MUSBState {
-    qemu_irq irqs[musb_irq_max];
-    USBBus bus;
-    USBPort port;
-
-    int idx;
-    uint8_t devctl;
-    uint8_t power;
-    uint8_t faddr;
-
-    uint8_t intr;
-    uint8_t mask;
-    uint16_t tx_intr;
-    uint16_t tx_mask;
-    uint16_t rx_intr;
-    uint16_t rx_mask;
-
-    int setup_len;
-    int session;
-
-    uint8_t buf[0x8000];
-
-        /* Duplicating the world since 2008!...  probably we should have 32
-         * logical, single endpoints instead.  */
-    MUSBEndPoint ep[16];
-};
-
-void musb_reset(MUSBState *s)
-{
-    int i;
-
-    s->faddr = 0x00;
-    s->devctl = 0;
-    s->power = MGC_M_POWER_HSENAB;
-    s->tx_intr = 0x0000;
-    s->rx_intr = 0x0000;
-    s->tx_mask = 0xffff;
-    s->rx_mask = 0xffff;
-    s->intr = 0x00;
-    s->mask = 0x06;
-    s->idx = 0;
-
-    s->setup_len = 0;
-    s->session = 0;
-    memset(s->buf, 0, sizeof(s->buf));
-
-    /* TODO: _DW */
-    s->ep[0].config = MGC_M_CONFIGDATA_SOFTCONE | MGC_M_CONFIGDATA_DYNFIFO;
-    for (i = 0; i < 16; i ++) {
-        s->ep[i].fifosize = 64;
-        s->ep[i].maxp[0] = 0x40;
-        s->ep[i].maxp[1] = 0x40;
-        s->ep[i].musb = s;
-        s->ep[i].epnum = i;
-        usb_packet_init(&s->ep[i].packey[0].p);
-        usb_packet_init(&s->ep[i].packey[1].p);
-    }
-}
-
-struct MUSBState *musb_init(DeviceState *parent_device, int gpio_base)
-{
-    MUSBState *s = g_malloc0(sizeof(*s));
-    int i;
-
-    for (i = 0; i < musb_irq_max; i++) {
-        s->irqs[i] = qdev_get_gpio_in(parent_device, gpio_base + i);
-    }
-
-    musb_reset(s);
-
-    usb_bus_new(&s->bus, sizeof(s->bus), &musb_bus_ops, parent_device);
-    usb_register_port(&s->bus, &s->port, s, 0, &musb_port_ops,
-                      USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);
-
-    return s;
-}
-
-static void musb_vbus_set(MUSBState *s, int level)
-{
-    if (level)
-        s->devctl |= 3 << MGC_S_DEVCTL_VBUS;
-    else
-        s->devctl &= ~MGC_M_DEVCTL_VBUS;
-
-    qemu_set_irq(s->irqs[musb_set_vbus], level);
-}
-
-static void musb_intr_set(MUSBState *s, int line, int level)
-{
-    if (!level) {
-        s->intr &= ~(1 << line);
-        qemu_irq_lower(s->irqs[line]);
-    } else if (s->mask & (1 << line)) {
-        s->intr |= 1 << line;
-        qemu_irq_raise(s->irqs[line]);
-    }
-}
-
-static void musb_tx_intr_set(MUSBState *s, int line, int level)
-{
-    if (!level) {
-        s->tx_intr &= ~(1 << line);
-        if (!s->tx_intr)
-            qemu_irq_lower(s->irqs[musb_irq_tx]);
-    } else if (s->tx_mask & (1 << line)) {
-        s->tx_intr |= 1 << line;
-        qemu_irq_raise(s->irqs[musb_irq_tx]);
-    }
-}
-
-static void musb_rx_intr_set(MUSBState *s, int line, int level)
-{
-    if (line) {
-        if (!level) {
-            s->rx_intr &= ~(1 << line);
-            if (!s->rx_intr)
-                qemu_irq_lower(s->irqs[musb_irq_rx]);
-        } else if (s->rx_mask & (1 << line)) {
-            s->rx_intr |= 1 << line;
-            qemu_irq_raise(s->irqs[musb_irq_rx]);
-        }
-    } else
-        musb_tx_intr_set(s, line, level);
-}
-
-uint32_t musb_core_intr_get(MUSBState *s)
-{
-    return (s->rx_intr << 15) | s->tx_intr;
-}
-
-void musb_core_intr_clear(MUSBState *s, uint32_t mask)
-{
-    if (s->rx_intr) {
-        s->rx_intr &= mask >> 15;
-        if (!s->rx_intr)
-            qemu_irq_lower(s->irqs[musb_irq_rx]);
-    }
-
-    if (s->tx_intr) {
-        s->tx_intr &= mask & 0xffff;
-        if (!s->tx_intr)
-            qemu_irq_lower(s->irqs[musb_irq_tx]);
-    }
-}
-
-void musb_set_size(MUSBState *s, int epnum, int size, int is_tx)
-{
-    s->ep[epnum].ext_size[!is_tx] = size;
-    s->ep[epnum].fifostart[0] = 0;
-    s->ep[epnum].fifostart[1] = 0;
-    s->ep[epnum].fifolen[0] = 0;
-    s->ep[epnum].fifolen[1] = 0;
-}
-
-static void musb_session_update(MUSBState *s, int prev_dev, int prev_sess)
-{
-    int detect_prev = prev_dev && prev_sess;
-    int detect = !!s->port.dev && s->session;
-
-    if (detect && !detect_prev) {
-        /* Let's skip the ID pin sense and VBUS sense formalities and
-         * and signal a successful SRP directly.  This should work at least
-         * for the Linux driver stack.  */
-        musb_intr_set(s, musb_irq_connect, 1);
-
-        if (s->port.dev->speed == USB_SPEED_LOW) {
-            s->devctl &= ~MGC_M_DEVCTL_FSDEV;
-            s->devctl |= MGC_M_DEVCTL_LSDEV;
-        } else {
-            s->devctl |= MGC_M_DEVCTL_FSDEV;
-            s->devctl &= ~MGC_M_DEVCTL_LSDEV;
-        }
-
-        /* A-mode?  */
-        s->devctl &= ~MGC_M_DEVCTL_BDEVICE;
-
-        /* Host-mode bit?  */
-        s->devctl |= MGC_M_DEVCTL_HM;
-#if 1
-        musb_vbus_set(s, 1);
-#endif
-    } else if (!detect && detect_prev) {
-#if 1
-        musb_vbus_set(s, 0);
-#endif
-    }
-}
-
-/* Attach or detach a device on our only port.  */
-static void musb_attach(USBPort *port)
-{
-    MUSBState *s = (MUSBState *) port->opaque;
-
-    musb_intr_set(s, musb_irq_vbus_request, 1);
-    musb_session_update(s, 0, s->session);
-}
-
-static void musb_detach(USBPort *port)
-{
-    MUSBState *s = (MUSBState *) port->opaque;
-
-    musb_async_cancel_device(s, port->dev);
-
-    musb_intr_set(s, musb_irq_disconnect, 1);
-    musb_session_update(s, 1, s->session);
-}
-
-static void musb_child_detach(USBPort *port, USBDevice *child)
-{
-    MUSBState *s = (MUSBState *) port->opaque;
-
-    musb_async_cancel_device(s, child);
-}
-
-static void musb_cb_tick0(void *opaque)
-{
-    MUSBEndPoint *ep = (MUSBEndPoint *) opaque;
-
-    ep->delayed_cb[0](&ep->packey[0].p, opaque);
-}
-
-static void musb_cb_tick1(void *opaque)
-{
-    MUSBEndPoint *ep = (MUSBEndPoint *) opaque;
-
-    ep->delayed_cb[1](&ep->packey[1].p, opaque);
-}
-
-#define musb_cb_tick    (dir ? musb_cb_tick1 : musb_cb_tick0)
-
-static void musb_schedule_cb(USBPort *port, USBPacket *packey)
-{
-    MUSBPacket *p = container_of(packey, MUSBPacket, p);
-    MUSBEndPoint *ep = p->ep;
-    int dir = p->dir;
-    int timeout = 0;
-
-    if (ep->status[dir] == USB_RET_NAK)
-        timeout = ep->timeout[dir];
-    else if (ep->interrupt[dir])
-        timeout = 8;
-    else {
-        musb_cb_tick(ep);
-        return;
-    }
-
-    if (!ep->intv_timer[dir])
-        ep->intv_timer[dir] = timer_new_ns(QEMU_CLOCK_VIRTUAL, musb_cb_tick, ep);
-
-    timer_mod(ep->intv_timer[dir], qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
-                   muldiv64(timeout, NANOSECONDS_PER_SECOND, 8000));
-}
-
-static int musb_timeout(int ttype, int speed, int val)
-{
-#if 1
-    return val << 3;
-#endif
-
-    switch (ttype) {
-    case USB_ENDPOINT_XFER_CONTROL:
-        if (val < 2)
-            return 0;
-        else if (speed == USB_SPEED_HIGH)
-            return 1 << (val - 1);
-        else
-            return 8 << (val - 1);
-
-    case USB_ENDPOINT_XFER_INT:
-        if (speed == USB_SPEED_HIGH)
-            if (val < 2)
-                return 0;
-            else
-                return 1 << (val - 1);
-        else
-            return val << 3;
-
-    case USB_ENDPOINT_XFER_BULK:
-    case USB_ENDPOINT_XFER_ISOC:
-        if (val < 2)
-            return 0;
-        else if (speed == USB_SPEED_HIGH)
-            return 1 << (val - 1);
-        else
-            return 8 << (val - 1);
-        /* TODO: what with low-speed Bulk and Isochronous?  */
-    }
-
-    hw_error("bad interval\n");
-}
-
-static void musb_packet(MUSBState *s, MUSBEndPoint *ep,
-                int epnum, int pid, int len, USBCallback cb, int dir)
-{
-    USBDevice *dev;
-    USBEndpoint *uep;
-    int idx = epnum && dir;
-    int id;
-    int ttype;
-
-    /* ep->type[0,1] contains:
-     * in bits 7:6 the speed (0 - invalid, 1 - high, 2 - full, 3 - slow)
-     * in bits 5:4 the transfer type (BULK / INT)
-     * in bits 3:0 the EP num
-     */
-    ttype = epnum ? (ep->type[idx] >> 4) & 3 : 0;
-
-    ep->timeout[dir] = musb_timeout(ttype,
-                    ep->type[idx] >> 6, ep->interval[idx]);
-    ep->interrupt[dir] = ttype == USB_ENDPOINT_XFER_INT;
-    ep->delayed_cb[dir] = cb;
-
-    /* A wild guess on the FADDR semantics... */
-    dev = usb_find_device(&s->port, ep->faddr[idx]);
-    if (dev == NULL) {
-        return;
-    }
-    uep = usb_ep_get(dev, pid, ep->type[idx] & 0xf);
-    id = pid | (dev->addr << 16) | (uep->nr << 8);
-    usb_packet_setup(&ep->packey[dir].p, pid, uep, 0, id, false, true);
-    usb_packet_addbuf(&ep->packey[dir].p, ep->buf[idx], len);
-    ep->packey[dir].ep = ep;
-    ep->packey[dir].dir = dir;
-
-    usb_handle_packet(dev, &ep->packey[dir].p);
-
-    if (ep->packey[dir].p.status == USB_RET_ASYNC) {
-        usb_device_flush_ep_queue(dev, uep);
-        ep->status[dir] = len;
-        return;
-    }
-
-    if (ep->packey[dir].p.status == USB_RET_SUCCESS) {
-        ep->status[dir] = ep->packey[dir].p.actual_length;
-    } else {
-        ep->status[dir] = ep->packey[dir].p.status;
-    }
-    musb_schedule_cb(&s->port, &ep->packey[dir].p);
-}
-
-static void musb_tx_packet_complete(USBPacket *packey, void *opaque)
-{
-    /* Unfortunately we can't use packey->devep because that's the remote
-     * endpoint number and may be different than our local.  */
-    MUSBEndPoint *ep = (MUSBEndPoint *) opaque;
-    int epnum = ep->epnum;
-    MUSBState *s = ep->musb;
-
-    ep->fifostart[0] = 0;
-    ep->fifolen[0] = 0;
-#ifdef CLEAR_NAK
-    if (ep->status[0] != USB_RET_NAK) {
-#endif
-        if (epnum)
-            ep->csr[0] &= ~(MGC_M_TXCSR_FIFONOTEMPTY | MGC_M_TXCSR_TXPKTRDY);
-        else
-            ep->csr[0] &= ~MGC_M_CSR0_TXPKTRDY;
-#ifdef CLEAR_NAK
-    }
-#endif
-
-    /* Clear all of the error bits first */
-    if (epnum)
-        ep->csr[0] &= ~(MGC_M_TXCSR_H_ERROR | MGC_M_TXCSR_H_RXSTALL |
-                        MGC_M_TXCSR_H_NAKTIMEOUT);
-    else
-        ep->csr[0] &= ~(MGC_M_CSR0_H_ERROR | MGC_M_CSR0_H_RXSTALL |
-                        MGC_M_CSR0_H_NAKTIMEOUT | MGC_M_CSR0_H_NO_PING);
-
-    if (ep->status[0] == USB_RET_STALL) {
-        /* Command not supported by target! */
-        ep->status[0] = 0;
-
-        if (epnum)
-            ep->csr[0] |= MGC_M_TXCSR_H_RXSTALL;
-        else
-            ep->csr[0] |= MGC_M_CSR0_H_RXSTALL;
-    }
-
-    if (ep->status[0] == USB_RET_NAK) {
-        ep->status[0] = 0;
-
-        /* NAK timeouts are only generated in Bulk transfers and
-         * Data-errors in Isochronous.  */
-        if (ep->interrupt[0]) {
-            return;
-        }
-
-        if (epnum)
-            ep->csr[0] |= MGC_M_TXCSR_H_NAKTIMEOUT;
-        else
-            ep->csr[0] |= MGC_M_CSR0_H_NAKTIMEOUT;
-    }
-
-    if (ep->status[0] < 0) {
-        if (ep->status[0] == USB_RET_BABBLE)
-            musb_intr_set(s, musb_irq_rst_babble, 1);
-
-        /* Pretend we've tried three times already and failed (in
-         * case of USB_TOKEN_SETUP).  */
-        if (epnum)
-            ep->csr[0] |= MGC_M_TXCSR_H_ERROR;
-        else
-            ep->csr[0] |= MGC_M_CSR0_H_ERROR;
-
-        musb_tx_intr_set(s, epnum, 1);
-        return;
-    }
-    /* TODO: check len for over/underruns of an OUT packet?  */
-
-#ifdef SETUPLEN_HACK
-    if (!epnum && ep->packey[0].pid == USB_TOKEN_SETUP)
-        s->setup_len = ep->packey[0].data[6];
-#endif
-
-    /* In DMA mode: if no error, assert DMA request for this EP,
-     * and skip the interrupt.  */
-    musb_tx_intr_set(s, epnum, 1);
-}
-
-static void musb_rx_packet_complete(USBPacket *packey, void *opaque)
-{
-    /* Unfortunately we can't use packey->devep because that's the remote
-     * endpoint number and may be different than our local.  */
-    MUSBEndPoint *ep = (MUSBEndPoint *) opaque;
-    int epnum = ep->epnum;
-    MUSBState *s = ep->musb;
-
-    ep->fifostart[1] = 0;
-    ep->fifolen[1] = 0;
-
-#ifdef CLEAR_NAK
-    if (ep->status[1] != USB_RET_NAK) {
-#endif
-        ep->csr[1] &= ~MGC_M_RXCSR_H_REQPKT;
-        if (!epnum)
-            ep->csr[0] &= ~MGC_M_CSR0_H_REQPKT;
-#ifdef CLEAR_NAK
-    }
-#endif
-
-    /* Clear all of the imaginable error bits first */
-    ep->csr[1] &= ~(MGC_M_RXCSR_H_ERROR | MGC_M_RXCSR_H_RXSTALL |
-                    MGC_M_RXCSR_DATAERROR);
-    if (!epnum)
-        ep->csr[0] &= ~(MGC_M_CSR0_H_ERROR | MGC_M_CSR0_H_RXSTALL |
-                        MGC_M_CSR0_H_NAKTIMEOUT | MGC_M_CSR0_H_NO_PING);
-
-    if (ep->status[1] == USB_RET_STALL) {
-        ep->status[1] = 0;
-
-        ep->csr[1] |= MGC_M_RXCSR_H_RXSTALL;
-        if (!epnum)
-            ep->csr[0] |= MGC_M_CSR0_H_RXSTALL;
-    }
-
-    if (ep->status[1] == USB_RET_NAK) {
-        ep->status[1] = 0;
-
-        /* NAK timeouts are only generated in Bulk transfers and
-         * Data-errors in Isochronous.  */
-        if (ep->interrupt[1]) {
-            musb_packet(s, ep, epnum, USB_TOKEN_IN,
-                        packey->iov.size, musb_rx_packet_complete, 1);
-            return;
-        }
-
-        ep->csr[1] |= MGC_M_RXCSR_DATAERROR;
-        if (!epnum)
-            ep->csr[0] |= MGC_M_CSR0_H_NAKTIMEOUT;
-    }
-
-    if (ep->status[1] < 0) {
-        if (ep->status[1] == USB_RET_BABBLE) {
-            musb_intr_set(s, musb_irq_rst_babble, 1);
-            return;
-        }
-
-        /* Pretend we've tried three times already and failed (in
-         * case of a control transfer).  */
-        ep->csr[1] |= MGC_M_RXCSR_H_ERROR;
-        if (!epnum)
-            ep->csr[0] |= MGC_M_CSR0_H_ERROR;
-
-        musb_rx_intr_set(s, epnum, 1);
-        return;
-    }
-    /* TODO: check len for over/underruns of an OUT packet?  */
-    /* TODO: perhaps make use of e->ext_size[1] here.  */
-
-    if (!(ep->csr[1] & (MGC_M_RXCSR_H_RXSTALL | MGC_M_RXCSR_DATAERROR))) {
-        ep->csr[1] |= MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY;
-        if (!epnum)
-            ep->csr[0] |= MGC_M_CSR0_RXPKTRDY;
-
-        ep->rxcount = ep->status[1]; /* XXX: MIN(packey->len, ep->maxp[1]); */
-        /* In DMA mode: assert DMA request for this EP */
-    }
-
-    /* Only if DMA has not been asserted */
-    musb_rx_intr_set(s, epnum, 1);
-}
-
-static void musb_async_cancel_device(MUSBState *s, USBDevice *dev)
-{
-    int ep, dir;
-
-    for (ep = 0; ep < 16; ep++) {
-        for (dir = 0; dir < 2; dir++) {
-            if (!usb_packet_is_inflight(&s->ep[ep].packey[dir].p) ||
-                s->ep[ep].packey[dir].p.ep->dev != dev) {
-                continue;
-            }
-            usb_cancel_packet(&s->ep[ep].packey[dir].p);
-            /* status updates needed here? */
-        }
-    }
-}
-
-static void musb_tx_rdy(MUSBState *s, int epnum)
-{
-    MUSBEndPoint *ep = s->ep + epnum;
-    int pid;
-    int total, valid = 0;
-    TRACE("start %d, len %d",  ep->fifostart[0], ep->fifolen[0] );
-    ep->fifostart[0] += ep->fifolen[0];
-    ep->fifolen[0] = 0;
-
-    /* XXX: how's the total size of the packet retrieved exactly in
-     * the generic case?  */
-    total = ep->maxp[0] & 0x3ff;
-
-    if (ep->ext_size[0]) {
-        total = ep->ext_size[0];
-        ep->ext_size[0] = 0;
-        valid = 1;
-    }
-
-    /* If the packet is not fully ready yet, wait for a next segment.  */
-    if (epnum && (ep->fifostart[0]) < total)
-        return;
-
-    if (!valid)
-        total = ep->fifostart[0];
-
-    pid = USB_TOKEN_OUT;
-    if (!epnum && (ep->csr[0] & MGC_M_CSR0_H_SETUPPKT)) {
-        pid = USB_TOKEN_SETUP;
-        if (total != 8) {
-            TRACE("illegal SETUPPKT length of %i bytes", total);
-        }
-        /* Controller should retry SETUP packets three times on errors
-         * but it doesn't make sense for us to do that.  */
-    }
-
-    musb_packet(s, ep, epnum, pid, total, musb_tx_packet_complete, 0);
-}
-
-static void musb_rx_req(MUSBState *s, int epnum)
-{
-    MUSBEndPoint *ep = s->ep + epnum;
-    int total;
-
-    /* If we already have a packet, which didn't fit into the
-     * 64 bytes of the FIFO, only move the FIFO start and return. (Obsolete) */
-    if (ep->packey[1].p.pid == USB_TOKEN_IN && ep->status[1] >= 0 &&
-                    (ep->fifostart[1]) + ep->rxcount <
-                    ep->packey[1].p.iov.size) {
-        TRACE("0x%08x, %d",  ep->fifostart[1], ep->rxcount );
-        ep->fifostart[1] += ep->rxcount;
-        ep->fifolen[1] = 0;
-
-        ep->rxcount = MIN(ep->packey[0].p.iov.size - (ep->fifostart[1]),
-                        ep->maxp[1]);
-
-        ep->csr[1] &= ~MGC_M_RXCSR_H_REQPKT;
-        if (!epnum)
-            ep->csr[0] &= ~MGC_M_CSR0_H_REQPKT;
-
-        /* Clear all of the error bits first */
-        ep->csr[1] &= ~(MGC_M_RXCSR_H_ERROR | MGC_M_RXCSR_H_RXSTALL |
-                        MGC_M_RXCSR_DATAERROR);
-        if (!epnum)
-            ep->csr[0] &= ~(MGC_M_CSR0_H_ERROR | MGC_M_CSR0_H_RXSTALL |
-                            MGC_M_CSR0_H_NAKTIMEOUT | MGC_M_CSR0_H_NO_PING);
-
-        ep->csr[1] |= MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY;
-        if (!epnum)
-            ep->csr[0] |= MGC_M_CSR0_RXPKTRDY;
-        musb_rx_intr_set(s, epnum, 1);
-        return;
-    }
-
-    /* The driver sets maxp[1] to 64 or less because it knows the hardware
-     * FIFO is this deep.  Bigger packets get split in
-     * usb_generic_handle_packet but we can also do the splitting locally
-     * for performance.  It turns out we can also have a bigger FIFO and
-     * ignore the limit set in ep->maxp[1].  The Linux MUSB driver deals
-     * OK with single packets of even 32KB and we avoid splitting, however
-     * usb_msd.c sometimes sends a packet bigger than what Linux expects
-     * (e.g. 8192 bytes instead of 4096) and we get an OVERRUN.  Splitting
-     * hides this overrun from Linux.  Up to 4096 everything is fine
-     * though.  Currently this is disabled.
-     *
-     * XXX: mind ep->fifosize.  */
-    total = MIN(ep->maxp[1] & 0x3ff, sizeof(s->buf));
-
-#ifdef SETUPLEN_HACK
-    /* Why should *we* do that instead of Linux?  */
-    if (!epnum) {
-        if (ep->packey[0].p.devaddr == 2) {
-            total = MIN(s->setup_len, 8);
-        } else {
-            total = MIN(s->setup_len, 64);
-        }
-        s->setup_len -= total;
-    }
-#endif
-
-    musb_packet(s, ep, epnum, USB_TOKEN_IN, total, musb_rx_packet_complete, 1);
-}
-
-static uint8_t musb_read_fifo(MUSBEndPoint *ep)
-{
-    uint8_t value;
-    if (ep->fifolen[1] >= 64) {
-        /* We have a FIFO underrun */
-        TRACE("EP%d FIFO is now empty, stop reading", ep->epnum);
-        return 0x00000000;
-    }
-    /* In DMA mode clear RXPKTRDY and set REQPKT automatically
-     * (if AUTOREQ is set) */
-
-    ep->csr[1] &= ~MGC_M_RXCSR_FIFOFULL;
-    value=ep->buf[1][ep->fifostart[1] + ep->fifolen[1] ++];
-    TRACE("EP%d 0x%02x, %d", ep->epnum, value, ep->fifolen[1] );
-    return value;
-}
-
-static void musb_write_fifo(MUSBEndPoint *ep, uint8_t value)
-{
-    TRACE("EP%d = %02x", ep->epnum, value);
-    if (ep->fifolen[0] >= 64) {
-        /* We have a FIFO overrun */
-        TRACE("EP%d FIFO exceeded 64 bytes, stop feeding data", ep->epnum);
-        return;
-     }
-
-     ep->buf[0][ep->fifostart[0] + ep->fifolen[0] ++] = value;
-     ep->csr[0] |= MGC_M_TXCSR_FIFONOTEMPTY;
-}
-
-static void musb_ep_frame_cancel(MUSBEndPoint *ep, int dir)
-{
-    if (ep->intv_timer[dir])
-        timer_del(ep->intv_timer[dir]);
-}
-
-/* Bus control */
-static uint8_t musb_busctl_readb(void *opaque, int ep, int addr)
-{
-    MUSBState *s = (MUSBState *) opaque;
-
-    switch (addr) {
-    /* For USB2.0 HS hubs only */
-    case MUSB_HDRC_TXHUBADDR:
-        return s->ep[ep].haddr[0];
-    case MUSB_HDRC_TXHUBPORT:
-        return s->ep[ep].hport[0];
-    case MUSB_HDRC_RXHUBADDR:
-        return s->ep[ep].haddr[1];
-    case MUSB_HDRC_RXHUBPORT:
-        return s->ep[ep].hport[1];
-
-    default:
-        TRACE("unknown register 0x%02x", addr);
-        return 0x00;
-    };
-}
-
-static void musb_busctl_writeb(void *opaque, int ep, int addr, uint8_t value)
-{
-    MUSBState *s = (MUSBState *) opaque;
-
-    switch (addr) {
-    case MUSB_HDRC_TXFUNCADDR:
-        s->ep[ep].faddr[0] = value;
-        break;
-    case MUSB_HDRC_RXFUNCADDR:
-        s->ep[ep].faddr[1] = value;
-        break;
-    case MUSB_HDRC_TXHUBADDR:
-        s->ep[ep].haddr[0] = value;
-        break;
-    case MUSB_HDRC_TXHUBPORT:
-        s->ep[ep].hport[0] = value;
-        break;
-    case MUSB_HDRC_RXHUBADDR:
-        s->ep[ep].haddr[1] = value;
-        break;
-    case MUSB_HDRC_RXHUBPORT:
-        s->ep[ep].hport[1] = value;
-        break;
-
-    default:
-        TRACE("unknown register 0x%02x", addr);
-        break;
-    };
-}
-
-static uint16_t musb_busctl_readh(void *opaque, int ep, int addr)
-{
-    MUSBState *s = (MUSBState *) opaque;
-
-    switch (addr) {
-    case MUSB_HDRC_TXFUNCADDR:
-        return s->ep[ep].faddr[0];
-    case MUSB_HDRC_RXFUNCADDR:
-        return s->ep[ep].faddr[1];
-
-    default:
-        return musb_busctl_readb(s, ep, addr) |
-                (musb_busctl_readb(s, ep, addr | 1) << 8);
-    };
-}
-
-static void musb_busctl_writeh(void *opaque, int ep, int addr, uint16_t value)
-{
-    MUSBState *s = (MUSBState *) opaque;
-
-    switch (addr) {
-    case MUSB_HDRC_TXFUNCADDR:
-        s->ep[ep].faddr[0] = value;
-        break;
-    case MUSB_HDRC_RXFUNCADDR:
-        s->ep[ep].faddr[1] = value;
-        break;
-
-    default:
-        musb_busctl_writeb(s, ep, addr, value & 0xff);
-        musb_busctl_writeb(s, ep, addr | 1, value >> 8);
-    };
-}
-
-/* Endpoint control */
-static uint8_t musb_ep_readb(void *opaque, int ep, int addr)
-{
-    MUSBState *s = (MUSBState *) opaque;
-
-    switch (addr) {
-    case MUSB_HDRC_TXTYPE:
-        return s->ep[ep].type[0];
-    case MUSB_HDRC_TXINTERVAL:
-        return s->ep[ep].interval[0];
-    case MUSB_HDRC_RXTYPE:
-        return s->ep[ep].type[1];
-    case MUSB_HDRC_RXINTERVAL:
-        return s->ep[ep].interval[1];
-    case (MUSB_HDRC_FIFOSIZE & ~1):
-        return 0x00;
-    case MUSB_HDRC_FIFOSIZE:
-        return ep ? s->ep[ep].fifosize : s->ep[ep].config;
-    case MUSB_HDRC_RXCOUNT:
-        return s->ep[ep].rxcount;
-
-    default:
-        TRACE("unknown register 0x%02x", addr);
-        return 0x00;
-    };
-}
-
-static void musb_ep_writeb(void *opaque, int ep, int addr, uint8_t value)
-{
-    MUSBState *s = (MUSBState *) opaque;
-
-    switch (addr) {
-    case MUSB_HDRC_TXTYPE:
-        s->ep[ep].type[0] = value;
-        break;
-    case MUSB_HDRC_TXINTERVAL:
-        s->ep[ep].interval[0] = value;
-        musb_ep_frame_cancel(&s->ep[ep], 0);
-        break;
-    case MUSB_HDRC_RXTYPE:
-        s->ep[ep].type[1] = value;
-        break;
-    case MUSB_HDRC_RXINTERVAL:
-        s->ep[ep].interval[1] = value;
-        musb_ep_frame_cancel(&s->ep[ep], 1);
-        break;
-    case (MUSB_HDRC_FIFOSIZE & ~1):
-        break;
-    case MUSB_HDRC_FIFOSIZE:
-        TRACE("somebody messes with fifosize (now %i bytes)", value);
-        s->ep[ep].fifosize = value;
-        break;
-    default:
-        TRACE("unknown register 0x%02x", addr);
-        break;
-    };
-}
-
-static uint16_t musb_ep_readh(void *opaque, int ep, int addr)
-{
-    MUSBState *s = (MUSBState *) opaque;
-    uint16_t ret;
-
-    switch (addr) {
-    case MUSB_HDRC_TXMAXP:
-        return s->ep[ep].maxp[0];
-    case MUSB_HDRC_TXCSR:
-        return s->ep[ep].csr[0];
-    case MUSB_HDRC_RXMAXP:
-        return s->ep[ep].maxp[1];
-    case MUSB_HDRC_RXCSR:
-        ret = s->ep[ep].csr[1];
-
-        /* TODO: This and other bits probably depend on
-         * ep->csr[1] & MGC_M_RXCSR_AUTOCLEAR.  */
-        if (s->ep[ep].csr[1] & MGC_M_RXCSR_AUTOCLEAR)
-            s->ep[ep].csr[1] &= ~MGC_M_RXCSR_RXPKTRDY;
-
-        return ret;
-    case MUSB_HDRC_RXCOUNT:
-        return s->ep[ep].rxcount;
-
-    default:
-        return musb_ep_readb(s, ep, addr) |
-                (musb_ep_readb(s, ep, addr | 1) << 8);
-    };
-}
-
-static void musb_ep_writeh(void *opaque, int ep, int addr, uint16_t value)
-{
-    MUSBState *s = (MUSBState *) opaque;
-
-    switch (addr) {
-    case MUSB_HDRC_TXMAXP:
-        s->ep[ep].maxp[0] = value;
-        break;
-    case MUSB_HDRC_TXCSR:
-        if (ep) {
-            s->ep[ep].csr[0] &= value & 0xa6;
-            s->ep[ep].csr[0] |= value & 0xff59;
-        } else {
-            s->ep[ep].csr[0] &= value & 0x85;
-            s->ep[ep].csr[0] |= value & 0xf7a;
-        }
-
-        musb_ep_frame_cancel(&s->ep[ep], 0);
-
-        if ((ep && (value & MGC_M_TXCSR_FLUSHFIFO)) ||
-                        (!ep && (value & MGC_M_CSR0_FLUSHFIFO))) {
-            s->ep[ep].fifolen[0] = 0;
-            s->ep[ep].fifostart[0] = 0;
-            if (ep)
-                s->ep[ep].csr[0] &=
-                        ~(MGC_M_TXCSR_FIFONOTEMPTY | MGC_M_TXCSR_TXPKTRDY);
-            else
-                s->ep[ep].csr[0] &=
-                        ~(MGC_M_CSR0_TXPKTRDY | MGC_M_CSR0_RXPKTRDY);
-        }
-        if (
-                        (ep &&
-#ifdef CLEAR_NAK
-                         (value & MGC_M_TXCSR_TXPKTRDY) &&
-                         !(value & MGC_M_TXCSR_H_NAKTIMEOUT)) ||
-#else
-                         (value & MGC_M_TXCSR_TXPKTRDY)) ||
-#endif
-                        (!ep &&
-#ifdef CLEAR_NAK
-                         (value & MGC_M_CSR0_TXPKTRDY) &&
-                         !(value & MGC_M_CSR0_H_NAKTIMEOUT)))
-#else
-                         (value & MGC_M_CSR0_TXPKTRDY)))
-#endif
-            musb_tx_rdy(s, ep);
-        if (!ep &&
-                        (value & MGC_M_CSR0_H_REQPKT) &&
-#ifdef CLEAR_NAK
-                        !(value & (MGC_M_CSR0_H_NAKTIMEOUT |
-                                        MGC_M_CSR0_RXPKTRDY)))
-#else
-                        !(value & MGC_M_CSR0_RXPKTRDY))
-#endif
-            musb_rx_req(s, ep);
-        break;
-
-    case MUSB_HDRC_RXMAXP:
-        s->ep[ep].maxp[1] = value;
-        break;
-    case MUSB_HDRC_RXCSR:
-        /* (DMA mode only) */
-        if (
-                (value & MGC_M_RXCSR_H_AUTOREQ) &&
-                !(value & MGC_M_RXCSR_RXPKTRDY) &&
-                (s->ep[ep].csr[1] & MGC_M_RXCSR_RXPKTRDY))
-            value |= MGC_M_RXCSR_H_REQPKT;
-
-        s->ep[ep].csr[1] &= 0x102 | (value & 0x4d);
-        s->ep[ep].csr[1] |= value & 0xfeb0;
-
-        musb_ep_frame_cancel(&s->ep[ep], 1);
-
-        if (value & MGC_M_RXCSR_FLUSHFIFO) {
-            s->ep[ep].fifolen[1] = 0;
-            s->ep[ep].fifostart[1] = 0;
-            s->ep[ep].csr[1] &= ~(MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY);
-            /* If double buffering and we have two packets ready, flush
-             * only the first one and set up the fifo at the second packet.  */
-        }
-#ifdef CLEAR_NAK
-        if ((value & MGC_M_RXCSR_H_REQPKT) && !(value & MGC_M_RXCSR_DATAERROR))
-#else
-        if (value & MGC_M_RXCSR_H_REQPKT)
-#endif
-            musb_rx_req(s, ep);
-        break;
-    case MUSB_HDRC_RXCOUNT:
-        s->ep[ep].rxcount = value;
-        break;
-
-    default:
-        musb_ep_writeb(s, ep, addr, value & 0xff);
-        musb_ep_writeb(s, ep, addr | 1, value >> 8);
-    };
-}
-
-/* Generic control */
-static uint32_t musb_readb(void *opaque, hwaddr addr)
-{
-    MUSBState *s = (MUSBState *) opaque;
-    int ep, i;
-    uint8_t ret;
-
-    switch (addr) {
-    case MUSB_HDRC_FADDR:
-        return s->faddr;
-    case MUSB_HDRC_POWER:
-        return s->power;
-    case MUSB_HDRC_INTRUSB:
-        ret = s->intr;
-        for (i = 0; i < sizeof(ret) * 8; i ++)
-            if (ret & (1 << i))
-                musb_intr_set(s, i, 0);
-        return ret;
-    case MUSB_HDRC_INTRUSBE:
-        return s->mask;
-    case MUSB_HDRC_INDEX:
-        return s->idx;
-    case MUSB_HDRC_TESTMODE:
-        return 0x00;
-
-    case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf):
-        return musb_ep_readb(s, s->idx, addr & 0xf);
-
-    case MUSB_HDRC_DEVCTL:
-        return s->devctl;
-
-    case MUSB_HDRC_TXFIFOSZ:
-    case MUSB_HDRC_RXFIFOSZ:
-    case MUSB_HDRC_VCTRL:
-        /* TODO */
-        return 0x00;
-
-    case MUSB_HDRC_HWVERS:
-        return (1 << 10) | 400;
-
-    case (MUSB_HDRC_VCTRL | 1):
-    case (MUSB_HDRC_HWVERS | 1):
-    case (MUSB_HDRC_DEVCTL | 1):
-        return 0x00;
-
-    case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f):
-        ep = (addr >> 3) & 0xf;
-        return musb_busctl_readb(s, ep, addr & 0x7);
-
-    case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff):
-        ep = (addr >> 4) & 0xf;
-        return musb_ep_readb(s, ep, addr & 0xf);
-
-    case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f):
-        ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf;
-        return musb_read_fifo(s->ep + ep);
-
-    default:
-        TRACE("unknown register 0x%02x", (int) addr);
-        return 0x00;
-    };
-}
-
-static void musb_writeb(void *opaque, hwaddr addr, uint32_t value)
-{
-    MUSBState *s = (MUSBState *) opaque;
-    int ep;
-
-    switch (addr) {
-    case MUSB_HDRC_FADDR:
-        s->faddr = value & 0x7f;
-        break;
-    case MUSB_HDRC_POWER:
-        s->power = (value & 0xef) | (s->power & 0x10);
-        /* MGC_M_POWER_RESET is also read-only in Peripheral Mode */
-        if ((value & MGC_M_POWER_RESET) && s->port.dev) {
-            usb_device_reset(s->port.dev);
-            /* Negotiate high-speed operation if MGC_M_POWER_HSENAB is set.  */
-            if ((value & MGC_M_POWER_HSENAB) &&
-                            s->port.dev->speed == USB_SPEED_HIGH)
-                s->power |= MGC_M_POWER_HSMODE; /* Success */
-            /* Restart frame counting.  */
-        }
-        if (value & MGC_M_POWER_SUSPENDM) {
-            /* When all transfers finish, suspend and if MGC_M_POWER_ENSUSPEND
-             * is set, also go into low power mode.  Frame counting stops.  */
-            /* XXX: Cleared when the interrupt register is read */
-        }
-        if (value & MGC_M_POWER_RESUME) {
-            /* Wait 20ms and signal resuming on the bus.  Frame counting
-             * restarts.  */
-        }
-        break;
-    case MUSB_HDRC_INTRUSB:
-        break;
-    case MUSB_HDRC_INTRUSBE:
-        s->mask = value & 0xff;
-        break;
-    case MUSB_HDRC_INDEX:
-        s->idx = value & 0xf;
-        break;
-    case MUSB_HDRC_TESTMODE:
-        break;
-
-    case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf):
-        musb_ep_writeb(s, s->idx, addr & 0xf, value);
-        break;
-
-    case MUSB_HDRC_DEVCTL:
-        s->session = !!(value & MGC_M_DEVCTL_SESSION);
-        musb_session_update(s,
-                        !!s->port.dev,
-                        !!(s->devctl & MGC_M_DEVCTL_SESSION));
-
-        /* It seems this is the only R/W bit in this register?  */
-        s->devctl &= ~MGC_M_DEVCTL_SESSION;
-        s->devctl |= value & MGC_M_DEVCTL_SESSION;
-        break;
-
-    case MUSB_HDRC_TXFIFOSZ:
-    case MUSB_HDRC_RXFIFOSZ:
-    case MUSB_HDRC_VCTRL:
-        /* TODO */
-        break;
-
-    case (MUSB_HDRC_VCTRL | 1):
-    case (MUSB_HDRC_DEVCTL | 1):
-        break;
-
-    case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f):
-        ep = (addr >> 3) & 0xf;
-        musb_busctl_writeb(s, ep, addr & 0x7, value);
-        break;
-
-    case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff):
-        ep = (addr >> 4) & 0xf;
-        musb_ep_writeb(s, ep, addr & 0xf, value);
-        break;
-
-    case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f):
-        ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf;
-        musb_write_fifo(s->ep + ep, value & 0xff);
-        break;
-
-    default:
-        TRACE("unknown register 0x%02x", (int) addr);
-        break;
-    };
-}
-
-static uint32_t musb_readh(void *opaque, hwaddr addr)
-{
-    MUSBState *s = (MUSBState *) opaque;
-    int ep, i;
-    uint16_t ret;
-
-    switch (addr) {
-    case MUSB_HDRC_INTRTX:
-        ret = s->tx_intr;
-        /* Auto clear */
-        for (i = 0; i < sizeof(ret) * 8; i ++)
-            if (ret & (1 << i))
-                musb_tx_intr_set(s, i, 0);
-        return ret;
-    case MUSB_HDRC_INTRRX:
-        ret = s->rx_intr;
-        /* Auto clear */
-        for (i = 0; i < sizeof(ret) * 8; i ++)
-            if (ret & (1 << i))
-                musb_rx_intr_set(s, i, 0);
-        return ret;
-    case MUSB_HDRC_INTRTXE:
-        return s->tx_mask;
-    case MUSB_HDRC_INTRRXE:
-        return s->rx_mask;
-
-    case MUSB_HDRC_FRAME:
-        /* TODO */
-        return 0x0000;
-    case MUSB_HDRC_TXFIFOADDR:
-        return s->ep[s->idx].fifoaddr[0];
-    case MUSB_HDRC_RXFIFOADDR:
-        return s->ep[s->idx].fifoaddr[1];
-
-    case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf):
-        return musb_ep_readh(s, s->idx, addr & 0xf);
-
-    case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f):
-        ep = (addr >> 3) & 0xf;
-        return musb_busctl_readh(s, ep, addr & 0x7);
-
-    case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff):
-        ep = (addr >> 4) & 0xf;
-        return musb_ep_readh(s, ep, addr & 0xf);
-
-    case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f):
-        ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf;
-        return (musb_read_fifo(s->ep + ep) | musb_read_fifo(s->ep + ep) << 8);
-
-    default:
-        return musb_readb(s, addr) | (musb_readb(s, addr | 1) << 8);
-    };
-}
-
-static void musb_writeh(void *opaque, hwaddr addr, uint32_t value)
-{
-    MUSBState *s = (MUSBState *) opaque;
-    int ep;
-
-    switch (addr) {
-    case MUSB_HDRC_INTRTXE:
-        s->tx_mask = value;
-        /* XXX: the masks seem to apply on the raising edge like with
-         * edge-triggered interrupts, thus no need to update.  I may be
-         * wrong though.  */
-        break;
-    case MUSB_HDRC_INTRRXE:
-        s->rx_mask = value;
-        break;
-
-    case MUSB_HDRC_FRAME:
-        /* TODO */
-        break;
-    case MUSB_HDRC_TXFIFOADDR:
-        s->ep[s->idx].fifoaddr[0] = value;
-        s->ep[s->idx].buf[0] =
-                s->buf + ((value << 3) & 0x7ff );
-        break;
-    case MUSB_HDRC_RXFIFOADDR:
-        s->ep[s->idx].fifoaddr[1] = value;
-        s->ep[s->idx].buf[1] =
-                s->buf + ((value << 3) & 0x7ff);
-        break;
-
-    case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf):
-        musb_ep_writeh(s, s->idx, addr & 0xf, value);
-        break;
-
-    case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f):
-        ep = (addr >> 3) & 0xf;
-        musb_busctl_writeh(s, ep, addr & 0x7, value);
-        break;
-
-    case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff):
-        ep = (addr >> 4) & 0xf;
-        musb_ep_writeh(s, ep, addr & 0xf, value);
-        break;
-
-    case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f):
-        ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf;
-        musb_write_fifo(s->ep + ep, value & 0xff);
-        musb_write_fifo(s->ep + ep, (value >> 8) & 0xff);
-        break;
-
-    default:
-        musb_writeb(s, addr, value & 0xff);
-        musb_writeb(s, addr | 1, value >> 8);
-    };
-}
-
-static uint32_t musb_readw(void *opaque, hwaddr addr)
-{
-    MUSBState *s = (MUSBState *) opaque;
-    int ep;
-
-    switch (addr) {
-    case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f):
-        ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf;
-        return ( musb_read_fifo(s->ep + ep)       |
-                 musb_read_fifo(s->ep + ep) << 8  |
-                 musb_read_fifo(s->ep + ep) << 16 |
-                 musb_read_fifo(s->ep + ep) << 24 );
-    default:
-        TRACE("unknown register 0x%02x", (int) addr);
-        return 0x00000000;
-    };
-}
-
-static void musb_writew(void *opaque, hwaddr addr, uint32_t value)
-{
-    MUSBState *s = (MUSBState *) opaque;
-    int ep;
-
-    switch (addr) {
-    case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f):
-        ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf;
-        musb_write_fifo(s->ep + ep, value & 0xff);
-        musb_write_fifo(s->ep + ep, (value >> 8 ) & 0xff);
-        musb_write_fifo(s->ep + ep, (value >> 16) & 0xff);
-        musb_write_fifo(s->ep + ep, (value >> 24) & 0xff);
-            break;
-    default:
-        TRACE("unknown register 0x%02x", (int) addr);
-        break;
-    };
-}
-
-MUSBReadFunc * const musb_read[] = {
-    musb_readb,
-    musb_readh,
-    musb_readw,
-};
-
-MUSBWriteFunc * const musb_write[] = {
-    musb_writeb,
-    musb_writeh,
-    musb_writew,
-};
diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
index 0bffcda1b19..5fbecd2f43b 100644
--- a/hw/usb/Kconfig
+++ b/hw/usb/Kconfig
@@ -53,10 +53,6 @@ config USB_XHCI_SYSBUS
     bool
     select USB_XHCI
 
-config USB_MUSB
-    bool
-    select USB
-
 config USB_DWC2
     bool
     select USB
diff --git a/hw/usb/meson.build b/hw/usb/meson.build
index ae901481597..1b4d1507e41 100644
--- a/hw/usb/meson.build
+++ b/hw/usb/meson.build
@@ -23,7 +23,6 @@ system_ss.add(when: 'CONFIG_USB_XHCI', if_true: files('hcd-xhci.c'))
 system_ss.add(when: 'CONFIG_USB_XHCI_PCI', if_true: files('hcd-xhci-pci.c'))
 system_ss.add(when: 'CONFIG_USB_XHCI_SYSBUS', if_true: files('hcd-xhci-sysbus.c'))
 system_ss.add(when: 'CONFIG_USB_XHCI_NEC', if_true: files('hcd-xhci-nec.c'))
-system_ss.add(when: 'CONFIG_USB_MUSB', if_true: files('hcd-musb.c'))
 system_ss.add(when: 'CONFIG_USB_DWC2', if_true: files('hcd-dwc2.c'))
 system_ss.add(when: 'CONFIG_USB_DWC3', if_true: files('hcd-dwc3.c'))
 
