@@ -595,7 +595,7 @@ static int ipl_eckd(void)
* IPL a SCSI disk
*/
-static void zipl_load_segment(ComponentEntry *entry)
+static int zipl_load_segment(ComponentEntry *entry)
{
const int max_entries = (MAX_SECTOR_SIZE / sizeof(ScsiBlockPtr));
ScsiBlockPtr *bprs = (void *)sec;
@@ -615,7 +615,10 @@ static void zipl_load_segment(ComponentEntry *entry)
do {
memset(bprs, FREE_SPACE_FILLER, bprs_size);
fill_hex_val(blk_no, &blockno, sizeof(blockno));
- read_block(blockno, bprs, err_msg);
+ if (virtio_read(blockno, bprs)) {
+ puts(err_msg);
+ return -EIO;
+ }
for (i = 0;; i++) {
uint64_t *cur_desc = (void *)&bprs[i];
@@ -643,23 +646,37 @@ static void zipl_load_segment(ComponentEntry *entry)
}
address = virtio_load_direct(cur_desc[0], cur_desc[1], 0,
(void *)address);
- IPL_assert(address != -1, "zIPL load segment failed");
+ if (!address) {
+ puts("zIPL load segment failed");
+ return -EIO;
+ }
}
} while (blockno);
+
+ return 0;
}
/* Run a zipl program */
-static void zipl_run(ScsiBlockPtr *pte)
+static int zipl_run(ScsiBlockPtr *pte)
{
ComponentHeader *header;
ComponentEntry *entry;
uint8_t tmp_sec[MAX_SECTOR_SIZE];
- read_block(pte->blockno, tmp_sec, "Cannot read header");
+ if (virtio_read(pte->blockno, tmp_sec)) {
+ puts("Cannot read header");
+ return -EIO;
+ }
header = (ComponentHeader *)tmp_sec;
- IPL_assert(magic_match(tmp_sec, ZIPL_MAGIC), "No zIPL magic in header");
- IPL_assert(header->type == ZIPL_COMP_HEADER_IPL, "Bad header type");
+ if (!magic_match(tmp_sec, ZIPL_MAGIC)) {
+ puts("No zIPL magic in header");
+ return -EINVAL;
+ }
+ if (header->type != ZIPL_COMP_HEADER_IPL) {
+ puts("Bad header type");
+ return -EINVAL;
+ }
dputs("start loading images\n");
@@ -674,22 +691,30 @@ static void zipl_run(ScsiBlockPtr *pte)
continue;
}
- zipl_load_segment(entry);
+ if (zipl_load_segment(entry)) {
+ return -1;
+ }
entry++;
- IPL_assert((uint8_t *)(&entry[1]) <= (tmp_sec + MAX_SECTOR_SIZE),
- "Wrong entry value");
+ if ((uint8_t *)(&entry[1]) > (tmp_sec + MAX_SECTOR_SIZE)) {
+ puts("Wrong entry value");
+ return -EINVAL;
+ }
}
- IPL_assert(entry->component_type == ZIPL_COMP_ENTRY_EXEC, "No EXEC entry");
+ if (entry->component_type != ZIPL_COMP_ENTRY_EXEC) {
+ puts("No EXEC entry");
+ return -EINVAL;
+ }
/* should not return */
write_reset_psw(entry->compdat.load_psw);
jump_to_IPL_code(0);
+ return -1;
}
-static void ipl_scsi(void)
+static int ipl_scsi(void)
{
ScsiMbr *mbr = (void *)sec;
int program_table_entries = 0;
@@ -700,10 +725,13 @@ static void ipl_scsi(void)
/* Grab the MBR */
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
- read_block(0, mbr, "Cannot read block 0");
+ if (virtio_read(0, mbr)) {
+ puts("Cannot read block 0");
+ return -EIO;
+ }
if (!magic_match(mbr->magic, ZIPL_MAGIC)) {
- return;
+ return 0;
}
puts("Using SCSI scheme.");
@@ -711,11 +739,20 @@ static void ipl_scsi(void)
IPL_check(mbr->version_id == 1,
"Unknown MBR layout version, assuming version 1");
debug_print_int("program table", mbr->pt.blockno);
- IPL_assert(mbr->pt.blockno, "No Program Table");
+ if (!mbr->pt.blockno) {
+ puts("No Program Table");
+ return -EINVAL;
+ }
/* Parse the program table */
- read_block(mbr->pt.blockno, sec, "Error reading Program Table");
- IPL_assert(magic_match(sec, ZIPL_MAGIC), "No zIPL magic in PT");
+ if (virtio_read(mbr->pt.blockno, sec)) {
+ puts("Error reading Program Table");
+ return -EIO;
+ }
+ if (!magic_match(sec, ZIPL_MAGIC)) {
+ puts("No zIPL magic in Program Table");
+ return -EINVAL;
+ }
for (i = 0; i < MAX_BOOT_ENTRIES; i++) {
if (prog_table->entry[i].scsi.blockno) {
@@ -725,17 +762,22 @@ static void ipl_scsi(void)
}
debug_print_int("program table entries", program_table_entries);
- IPL_assert(program_table_entries != 0, "Empty Program Table");
+ if (program_table_entries == 0) {
+ puts("Empty Program Table");
+ return -EINVAL;
+ }
if (menu_is_enabled_enum()) {
loadparm = menu_get_enum_boot_index(valid_entries);
}
debug_print_int("loadparm", loadparm);
- IPL_assert(loadparm < MAX_BOOT_ENTRIES, "loadparm value greater than"
- " maximum number of boot entries allowed");
+ if (loadparm >= MAX_BOOT_ENTRIES) {
+ puts("loadparm value greater than max number of boot entries allowed");
+ return -EINVAL;
+ }
- zipl_run(&prog_table->entry[loadparm].scsi); /* no return */
+ return zipl_run(&prog_table->entry[loadparm].scsi);
}
/***********************************************************************
@@ -1032,7 +1074,9 @@ void zipl_load(void)
netmain();
}
- ipl_scsi();
+ if (ipl_scsi()) {
+ panic("\n! Cannot IPL this SCSI device !\n");
+ }
switch (virtio_get_device_type()) {
case VIRTIO_ID_BLOCK:
@@ -73,13 +73,13 @@ unsigned long virtio_load_direct(unsigned long rec_list1, unsigned long rec_list
unsigned long addr = (unsigned long)load_addr;
if (sec_len != virtio_get_block_size()) {
- return -1;
+ return 0;
}
printf(".");
status = virtio_read_many(sec, (void *)addr, sec_num);
if (status) {
- panic("I/O Error");
+ return 0;
}
addr += sec_num * virtio_get_block_size();
@@ -26,7 +26,7 @@ static uint8_t scsi_inquiry_std_response[256];
static ScsiInquiryEvpdPages scsi_inquiry_evpd_pages_response;
static ScsiInquiryEvpdBl scsi_inquiry_evpd_bl_response;
-static inline void vs_assert(bool term, const char **msgs)
+static inline bool vs_assert(bool term, const char **msgs)
{
if (!term) {
int i = 0;
@@ -35,11 +35,13 @@ static inline void vs_assert(bool term, const char **msgs)
while (msgs[i]) {
printf("%s", msgs[i++]);
}
- panic(" !\n");
+ puts(" !");
}
+
+ return term;
}
-static void virtio_scsi_verify_response(VirtioScsiCmdResp *resp,
+static bool virtio_scsi_verify_response(VirtioScsiCmdResp *resp,
const char *title)
{
const char *mr[] = {
@@ -56,8 +58,8 @@ static void virtio_scsi_verify_response(VirtioScsiCmdResp *resp,
0
};
- vs_assert(resp->response == VIRTIO_SCSI_S_OK, mr);
- vs_assert(resp->status == CDB_STATUS_GOOD, ms);
+ return vs_assert(resp->response == VIRTIO_SCSI_S_OK, mr) &&
+ vs_assert(resp->status == CDB_STATUS_GOOD, ms);
}
static void prepare_request(VDev *vdev, const void *cdb, int cdb_size,
@@ -78,24 +80,31 @@ static void prepare_request(VDev *vdev, const void *cdb, int cdb_size,
}
}
-static inline void vs_io_assert(bool term, const char *msg)
+static inline bool vs_io_assert(bool term, const char *msg)
{
- if (!term) {
- virtio_scsi_verify_response(&resp, msg);
+ if (!term && !virtio_scsi_verify_response(&resp, msg)) {
+ return false;
}
+
+ return true;
}
-static void vs_run(const char *title, VirtioCmd *cmd, VDev *vdev,
+static int vs_run(const char *title, VirtioCmd *cmd, VDev *vdev,
const void *cdb, int cdb_size,
void *data, uint32_t data_size)
{
prepare_request(vdev, cdb, cdb_size, data, data_size);
- vs_io_assert(virtio_run(vdev, VR_REQUEST, cmd) == 0, title);
+ if (!vs_io_assert(virtio_run(vdev, VR_REQUEST, cmd) == 0, title)) {
+ puts(title);
+ return -EIO;
+ }
+
+ return 0;
}
/* SCSI protocol implementation routines */
-static bool scsi_inquiry(VDev *vdev, uint8_t evpd, uint8_t page,
+static int scsi_inquiry(VDev *vdev, uint8_t evpd, uint8_t page,
void *data, uint32_t data_size)
{
ScsiCdbInquiry cdb = {
@@ -110,12 +119,13 @@ static bool scsi_inquiry(VDev *vdev, uint8_t evpd, uint8_t page,
{ data, data_size, VRING_DESC_F_WRITE },
};
- vs_run("inquiry", inquiry, vdev, &cdb, sizeof(cdb), data, data_size);
+ int ret = vs_run("inquiry", inquiry,
+ vdev, &cdb, sizeof(cdb), data, data_size);
- return virtio_scsi_response_ok(&resp);
+ return ret ? ret : virtio_scsi_response_ok(&resp);
}
-static bool scsi_test_unit_ready(VDev *vdev)
+static int scsi_test_unit_ready(VDev *vdev)
{
ScsiCdbTestUnitReady cdb = {
.command = 0x00,
@@ -131,7 +141,7 @@ static bool scsi_test_unit_ready(VDev *vdev)
return virtio_scsi_response_ok(&resp);
}
-static bool scsi_report_luns(VDev *vdev, void *data, uint32_t data_size)
+static int scsi_report_luns(VDev *vdev, void *data, uint32_t data_size)
{
ScsiCdbReportLuns cdb = {
.command = 0xa0,
@@ -144,13 +154,13 @@ static bool scsi_report_luns(VDev *vdev, void *data, uint32_t data_size)
{ data, data_size, VRING_DESC_F_WRITE },
};
- vs_run("report luns", report_luns,
+ int ret = vs_run("report luns", report_luns,
vdev, &cdb, sizeof(cdb), data, data_size);
- return virtio_scsi_response_ok(&resp);
+ return ret ? ret : virtio_scsi_response_ok(&resp);
}
-static bool scsi_read_10(VDev *vdev,
+static int scsi_read_10(VDev *vdev,
unsigned long sector, int sectors, void *data,
unsigned int data_size)
{
@@ -168,12 +178,13 @@ static bool scsi_read_10(VDev *vdev,
debug_print_int("read_10 sector", sector);
debug_print_int("read_10 sectors", sectors);
- vs_run("read(10)", read_10, vdev, &cdb, sizeof(cdb), data, data_size);
+ int ret = vs_run("read(10)", read_10,
+ vdev, &cdb, sizeof(cdb), data, data_size);
- return virtio_scsi_response_ok(&resp);
+ return ret ? ret : virtio_scsi_response_ok(&resp);
}
-static bool scsi_read_capacity(VDev *vdev,
+static int scsi_read_capacity(VDev *vdev,
void *data, uint32_t data_size)
{
ScsiCdbReadCapacity16 cdb = {
@@ -187,10 +198,10 @@ static bool scsi_read_capacity(VDev *vdev,
{ data, data_size, VRING_DESC_F_WRITE },
};
- vs_run("read capacity", read_capacity_16,
+ int ret = vs_run("read capacity", read_capacity_16,
vdev, &cdb, sizeof(cdb), data, data_size);
- return virtio_scsi_response_ok(&resp);
+ return ret ? ret : virtio_scsi_response_ok(&resp);
}
/* virtio-scsi routines */
@@ -207,7 +218,7 @@ static int virtio_scsi_locate_device(VDev *vdev)
static uint8_t data[16 + 8 * 63];
ScsiLunReport *r = (void *) data;
ScsiDevice *sdev = vdev->scsi_device;
- int i, luns;
+ int i, ret, luns;
/* QEMU has hardcoded channel #0 in many places.
* If this hardcoded value is ever changed, we'll need to add code for
@@ -233,13 +244,21 @@ static int virtio_scsi_locate_device(VDev *vdev)
sdev->channel = channel;
sdev->target = target;
sdev->lun = 0; /* LUN has to be 0 for REPORT LUNS */
- if (!scsi_report_luns(vdev, data, sizeof(data))) {
+ ret = scsi_report_luns(vdev, data, sizeof(data));
+ if (ret < 0) {
+ return ret;
+ }
+
+ else if (ret == 0) {
if (resp.response == VIRTIO_SCSI_S_BAD_TARGET) {
continue;
}
printf("target 0x%X\n", target);
- virtio_scsi_verify_response(&resp, "SCSI cannot report LUNs");
+ if (!virtio_scsi_verify_response(&resp, "SCSI cannot report LUNs")) {
+ return -EIO;
+ }
}
+
if (r->lun_list_len == 0) {
printf("no LUNs for target 0x%X\n", target);
continue;
@@ -283,7 +302,9 @@ int virtio_scsi_read_many(VDev *vdev,
data_size = sector_count * virtio_get_block_size() * f;
if (!scsi_read_10(vdev, sector * f, sector_count * f, load_addr,
data_size)) {
- virtio_scsi_verify_response(&resp, "virtio-scsi:read_many");
+ if (!virtio_scsi_verify_response(&resp, "virtio-scsi:read_many")) {
+ return -1;
+ }
}
load_addr += data_size;
sector += sector_count;
@@ -352,11 +373,16 @@ static int virtio_scsi_setup(VDev *vdev)
uint8_t code = resp.sense[0] & SCSI_SENSE_CODE_MASK;
uint8_t sense_key = resp.sense[2] & SCSI_SENSE_KEY_MASK;
- IPL_assert(resp.sense_len != 0, "virtio-scsi:setup: no SENSE data");
+ if (resp.sense_len == 0) {
+ puts("virtio-scsi: setup: no SENSE data");
+ return -EINVAL;
+ }
- IPL_assert(retry_test_unit_ready && code == 0x70 &&
- sense_key == SCSI_SENSE_KEY_UNIT_ATTENTION,
- "virtio-scsi:setup: cannot retry");
+ if (!retry_test_unit_ready || code != 0x70 ||
+ sense_key != SCSI_SENSE_KEY_UNIT_ATTENTION) {
+ puts("virtio-scsi:setup: cannot retry");
+ return -EIO;
+ }
/* retry on CHECK_CONDITION/UNIT_ATTENTION as it
* may not designate a real error, but it may be
@@ -367,16 +393,22 @@ static int virtio_scsi_setup(VDev *vdev)
continue;
}
- virtio_scsi_verify_response(&resp, "virtio-scsi:setup");
+ if (!virtio_scsi_verify_response(&resp, "virtio-scsi:setup")) {
+ return -1;
+ }
}
/* read and cache SCSI INQUIRY response */
- if (!scsi_inquiry(vdev,
+ ret = scsi_inquiry(vdev,
SCSI_INQUIRY_STANDARD,
SCSI_INQUIRY_STANDARD_NONE,
scsi_inquiry_std_response,
- sizeof(scsi_inquiry_std_response))) {
- virtio_scsi_verify_response(&resp, "virtio-scsi:setup:inquiry");
+ sizeof(scsi_inquiry_std_response));
+ if (ret < 1) {
+ if (ret != 0 || !virtio_scsi_verify_response(&resp,
+ "virtio-scsi:setup:inquiry")) {
+ return -1;
+ }
}
if (virtio_scsi_inquiry_response_is_cdrom(scsi_inquiry_std_response)) {
@@ -385,12 +417,16 @@ static int virtio_scsi_setup(VDev *vdev)
vdev->scsi_block_size = VIRTIO_ISO_BLOCK_SIZE;
}
- if (!scsi_inquiry(vdev,
+ ret = scsi_inquiry(vdev,
SCSI_INQUIRY_EVPD,
SCSI_INQUIRY_EVPD_SUPPORTED_PAGES,
evpd,
- sizeof(*evpd))) {
- virtio_scsi_verify_response(&resp, "virtio-scsi:setup:supported_pages");
+ sizeof(*evpd));
+ if (ret < 1) {
+ if (ret != 0 || !virtio_scsi_verify_response(&resp,
+ "virtio-scsi:setup:supported_pages")) {
+ return -1;
+ }
}
debug_print_int("EVPD length", evpd->page_length);
@@ -402,12 +438,16 @@ static int virtio_scsi_setup(VDev *vdev)
continue;
}
- if (!scsi_inquiry(vdev,
+ ret = scsi_inquiry(vdev,
SCSI_INQUIRY_EVPD,
SCSI_INQUIRY_EVPD_BLOCK_LIMITS,
evpd_bl,
- sizeof(*evpd_bl))) {
- virtio_scsi_verify_response(&resp, "virtio-scsi:setup:blocklimits");
+ sizeof(*evpd_bl));
+ if (ret < 1) {
+ if (ret != 0 || !virtio_scsi_verify_response(&resp,
+ "virtio-scsi:setup:blocklimits")) {
+ return -1;
+ }
}
debug_print_int("max transfer", evpd_bl->max_transfer);
@@ -423,8 +463,12 @@ static int virtio_scsi_setup(VDev *vdev)
vdev->max_transfer = MIN_NON_ZERO(VIRTIO_SCSI_MAX_SECTORS,
vdev->max_transfer);
- if (!scsi_read_capacity(vdev, data, data_size)) {
- virtio_scsi_verify_response(&resp, "virtio-scsi:setup:read_capacity");
+ ret = scsi_read_capacity(vdev, data, data_size);
+ if (ret < 1) {
+ if (ret != 0 || !virtio_scsi_verify_response(&resp,
+ "virtio-scsi:setup:read_capacity")) {
+ return -1;
+ }
}
scsi_parse_capacity_report(data, &vdev->scsi_last_block,
(uint32_t *) &vdev->scsi_block_size);
@@ -439,10 +483,15 @@ int virtio_scsi_setup_device(SubChannelId schid)
vdev->schid = schid;
virtio_setup_ccw(vdev);
- IPL_assert(vdev->config.scsi.sense_size == VIRTIO_SCSI_SENSE_SIZE,
- "Config: sense size mismatch");
- IPL_assert(vdev->config.scsi.cdb_size == VIRTIO_SCSI_CDB_SIZE,
- "Config: CDB size mismatch");
+ if (vdev->config.scsi.sense_size != VIRTIO_SCSI_SENSE_SIZE) {
+ puts("Config: sense size mismatch");
+ return -EINVAL;
+ }
+
+ if (vdev->config.scsi.cdb_size != VIRTIO_SCSI_CDB_SIZE) {
+ puts("Config: CDB size mismatch");
+ return -EINVAL;
+ }
puts("Using virtio-scsi.");