diff mbox series

[PULL,09/23] pc-bios/s390-ccw: Remove panics from SCSI IPL path

Message ID 20241023131710.906748-10-thuth@redhat.com (mailing list archive)
State New
Headers show
Series [PULL,01/23] hw/s390x/ipl: Provide more memory to the s390-ccw.img firmware | expand

Commit Message

Thomas Huth Oct. 23, 2024, 1:16 p.m. UTC
From: Jared Rossi <jrossi@linux.ibm.com>

Remove panic-on-error from virtio-scsi IPL specific functions so that error
recovery may be possible in the future.

Functions that would previously panic now provide a return code.

Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-10-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 pc-bios/s390-ccw/bootmap.c       |  88 ++++++++++++++-----
 pc-bios/s390-ccw/virtio-blkdev.c |   4 +-
 pc-bios/s390-ccw/virtio-scsi.c   | 143 +++++++++++++++++++++----------
 3 files changed, 164 insertions(+), 71 deletions(-)
diff mbox series

Patch

diff --git a/pc-bios/s390-ccw/bootmap.c b/pc-bios/s390-ccw/bootmap.c
index b9596e28c7..652807a16a 100644
--- a/pc-bios/s390-ccw/bootmap.c
+++ b/pc-bios/s390-ccw/bootmap.c
@@ -595,7 +595,7 @@  static int ipl_eckd(void)
  * IPL a SCSI disk
  */
 
-static void zipl_load_segment(ComponentEntry *entry)
+static int zipl_load_segment(ComponentEntry *entry)
 {
     const int max_entries = (MAX_SECTOR_SIZE / sizeof(ScsiBlockPtr));
     ScsiBlockPtr *bprs = (void *)sec;
@@ -615,7 +615,10 @@  static void zipl_load_segment(ComponentEntry *entry)
     do {
         memset(bprs, FREE_SPACE_FILLER, bprs_size);
         fill_hex_val(blk_no, &blockno, sizeof(blockno));
-        read_block(blockno, bprs, err_msg);
+        if (virtio_read(blockno, bprs)) {
+            puts(err_msg);
+            return -EIO;
+        }
 
         for (i = 0;; i++) {
             uint64_t *cur_desc = (void *)&bprs[i];
@@ -643,23 +646,37 @@  static void zipl_load_segment(ComponentEntry *entry)
             }
             address = virtio_load_direct(cur_desc[0], cur_desc[1], 0,
                                          (void *)address);
-            IPL_assert(address != -1, "zIPL load segment failed");
+            if (!address) {
+                puts("zIPL load segment failed");
+                return -EIO;
+            }
         }
     } while (blockno);
+
+    return 0;
 }
 
 /* Run a zipl program */
-static void zipl_run(ScsiBlockPtr *pte)
+static int zipl_run(ScsiBlockPtr *pte)
 {
     ComponentHeader *header;
     ComponentEntry *entry;
     uint8_t tmp_sec[MAX_SECTOR_SIZE];
 
-    read_block(pte->blockno, tmp_sec, "Cannot read header");
+    if (virtio_read(pte->blockno, tmp_sec)) {
+        puts("Cannot read header");
+        return -EIO;
+    }
     header = (ComponentHeader *)tmp_sec;
 
-    IPL_assert(magic_match(tmp_sec, ZIPL_MAGIC), "No zIPL magic in header");
-    IPL_assert(header->type == ZIPL_COMP_HEADER_IPL, "Bad header type");
+    if (!magic_match(tmp_sec, ZIPL_MAGIC)) {
+        puts("No zIPL magic in header");
+        return -EINVAL;
+    }
+    if (header->type != ZIPL_COMP_HEADER_IPL) {
+        puts("Bad header type");
+        return -EINVAL;
+    }
 
     dputs("start loading images\n");
 
@@ -674,22 +691,30 @@  static void zipl_run(ScsiBlockPtr *pte)
             continue;
         }
 
-        zipl_load_segment(entry);
+        if (zipl_load_segment(entry)) {
+            return -1;
+        }
 
         entry++;
 
-        IPL_assert((uint8_t *)(&entry[1]) <= (tmp_sec + MAX_SECTOR_SIZE),
-                   "Wrong entry value");
+        if ((uint8_t *)(&entry[1]) > (tmp_sec + MAX_SECTOR_SIZE)) {
+            puts("Wrong entry value");
+            return -EINVAL;
+        }
     }
 
-    IPL_assert(entry->component_type == ZIPL_COMP_ENTRY_EXEC, "No EXEC entry");
+    if (entry->component_type != ZIPL_COMP_ENTRY_EXEC) {
+        puts("No EXEC entry");
+        return -EINVAL;
+    }
 
     /* should not return */
     write_reset_psw(entry->compdat.load_psw);
     jump_to_IPL_code(0);
+    return -1;
 }
 
-static void ipl_scsi(void)
+static int ipl_scsi(void)
 {
     ScsiMbr *mbr = (void *)sec;
     int program_table_entries = 0;
@@ -700,10 +725,13 @@  static void ipl_scsi(void)
 
     /* Grab the MBR */
     memset(sec, FREE_SPACE_FILLER, sizeof(sec));
-    read_block(0, mbr, "Cannot read block 0");
+    if (virtio_read(0, mbr)) {
+        puts("Cannot read block 0");
+        return -EIO;
+    }
 
     if (!magic_match(mbr->magic, ZIPL_MAGIC)) {
-        return;
+        return 0;
     }
 
     puts("Using SCSI scheme.");
@@ -711,11 +739,20 @@  static void ipl_scsi(void)
     IPL_check(mbr->version_id == 1,
               "Unknown MBR layout version, assuming version 1");
     debug_print_int("program table", mbr->pt.blockno);
-    IPL_assert(mbr->pt.blockno, "No Program Table");
+    if (!mbr->pt.blockno) {
+        puts("No Program Table");
+        return -EINVAL;
+    }
 
     /* Parse the program table */
-    read_block(mbr->pt.blockno, sec, "Error reading Program Table");
-    IPL_assert(magic_match(sec, ZIPL_MAGIC), "No zIPL magic in PT");
+    if (virtio_read(mbr->pt.blockno, sec)) {
+        puts("Error reading Program Table");
+        return -EIO;
+    }
+    if (!magic_match(sec, ZIPL_MAGIC)) {
+        puts("No zIPL magic in Program Table");
+        return -EINVAL;
+    }
 
     for (i = 0; i < MAX_BOOT_ENTRIES; i++) {
         if (prog_table->entry[i].scsi.blockno) {
@@ -725,17 +762,22 @@  static void ipl_scsi(void)
     }
 
     debug_print_int("program table entries", program_table_entries);
-    IPL_assert(program_table_entries != 0, "Empty Program Table");
+    if (program_table_entries == 0) {
+        puts("Empty Program Table");
+        return -EINVAL;
+    }
 
     if (menu_is_enabled_enum()) {
         loadparm = menu_get_enum_boot_index(valid_entries);
     }
 
     debug_print_int("loadparm", loadparm);
-    IPL_assert(loadparm < MAX_BOOT_ENTRIES, "loadparm value greater than"
-               " maximum number of boot entries allowed");
+    if (loadparm >= MAX_BOOT_ENTRIES) {
+        puts("loadparm value greater than max number of boot entries allowed");
+        return -EINVAL;
+    }
 
-    zipl_run(&prog_table->entry[loadparm].scsi); /* no return */
+    return zipl_run(&prog_table->entry[loadparm].scsi);
 }
 
 /***********************************************************************
@@ -1032,7 +1074,9 @@  void zipl_load(void)
         netmain();
     }
 
-    ipl_scsi();
+    if (ipl_scsi()) {
+        panic("\n! Cannot IPL this SCSI device !\n");
+    }
 
     switch (virtio_get_device_type()) {
     case VIRTIO_ID_BLOCK:
diff --git a/pc-bios/s390-ccw/virtio-blkdev.c b/pc-bios/s390-ccw/virtio-blkdev.c
index 2666326801..1c585f034b 100644
--- a/pc-bios/s390-ccw/virtio-blkdev.c
+++ b/pc-bios/s390-ccw/virtio-blkdev.c
@@ -73,13 +73,13 @@  unsigned long virtio_load_direct(unsigned long rec_list1, unsigned long rec_list
     unsigned long addr = (unsigned long)load_addr;
 
     if (sec_len != virtio_get_block_size()) {
-        return -1;
+        return 0;
     }
 
     printf(".");
     status = virtio_read_many(sec, (void *)addr, sec_num);
     if (status) {
-        panic("I/O Error");
+        return 0;
     }
     addr += sec_num * virtio_get_block_size();
 
diff --git a/pc-bios/s390-ccw/virtio-scsi.c b/pc-bios/s390-ccw/virtio-scsi.c
index 6b4a1caf8a..71db75ce7b 100644
--- a/pc-bios/s390-ccw/virtio-scsi.c
+++ b/pc-bios/s390-ccw/virtio-scsi.c
@@ -26,7 +26,7 @@  static uint8_t scsi_inquiry_std_response[256];
 static ScsiInquiryEvpdPages scsi_inquiry_evpd_pages_response;
 static ScsiInquiryEvpdBl scsi_inquiry_evpd_bl_response;
 
-static inline void vs_assert(bool term, const char **msgs)
+static inline bool vs_assert(bool term, const char **msgs)
 {
     if (!term) {
         int i = 0;
@@ -35,11 +35,13 @@  static inline void vs_assert(bool term, const char **msgs)
         while (msgs[i]) {
             printf("%s", msgs[i++]);
         }
-        panic(" !\n");
+        puts(" !");
     }
+
+    return term;
 }
 
-static void virtio_scsi_verify_response(VirtioScsiCmdResp *resp,
+static bool virtio_scsi_verify_response(VirtioScsiCmdResp *resp,
                                         const char *title)
 {
     const char *mr[] = {
@@ -56,8 +58,8 @@  static void virtio_scsi_verify_response(VirtioScsiCmdResp *resp,
         0
     };
 
-    vs_assert(resp->response == VIRTIO_SCSI_S_OK, mr);
-    vs_assert(resp->status == CDB_STATUS_GOOD, ms);
+    return vs_assert(resp->response == VIRTIO_SCSI_S_OK, mr) &&
+           vs_assert(resp->status == CDB_STATUS_GOOD, ms);
 }
 
 static void prepare_request(VDev *vdev, const void *cdb, int cdb_size,
@@ -78,24 +80,31 @@  static void prepare_request(VDev *vdev, const void *cdb, int cdb_size,
     }
 }
 
-static inline void vs_io_assert(bool term, const char *msg)
+static inline bool vs_io_assert(bool term, const char *msg)
 {
-    if (!term) {
-        virtio_scsi_verify_response(&resp, msg);
+    if (!term && !virtio_scsi_verify_response(&resp, msg)) {
+        return false;
     }
+
+    return true;
 }
 
-static void vs_run(const char *title, VirtioCmd *cmd, VDev *vdev,
+static int vs_run(const char *title, VirtioCmd *cmd, VDev *vdev,
                    const void *cdb, int cdb_size,
                    void *data, uint32_t data_size)
 {
     prepare_request(vdev, cdb, cdb_size, data, data_size);
-    vs_io_assert(virtio_run(vdev, VR_REQUEST, cmd) == 0, title);
+    if (!vs_io_assert(virtio_run(vdev, VR_REQUEST, cmd) == 0, title)) {
+        puts(title);
+        return -EIO;
+    }
+
+    return 0;
 }
 
 /* SCSI protocol implementation routines */
 
-static bool scsi_inquiry(VDev *vdev, uint8_t evpd, uint8_t page,
+static int scsi_inquiry(VDev *vdev, uint8_t evpd, uint8_t page,
                          void *data, uint32_t data_size)
 {
     ScsiCdbInquiry cdb = {
@@ -110,12 +119,13 @@  static bool scsi_inquiry(VDev *vdev, uint8_t evpd, uint8_t page,
         { data, data_size, VRING_DESC_F_WRITE },
     };
 
-    vs_run("inquiry", inquiry, vdev, &cdb, sizeof(cdb), data, data_size);
+    int ret = vs_run("inquiry", inquiry,
+                     vdev, &cdb, sizeof(cdb), data, data_size);
 
-    return virtio_scsi_response_ok(&resp);
+    return ret ? ret : virtio_scsi_response_ok(&resp);
 }
 
-static bool scsi_test_unit_ready(VDev *vdev)
+static int scsi_test_unit_ready(VDev *vdev)
 {
     ScsiCdbTestUnitReady cdb = {
         .command = 0x00,
@@ -131,7 +141,7 @@  static bool scsi_test_unit_ready(VDev *vdev)
     return virtio_scsi_response_ok(&resp);
 }
 
-static bool scsi_report_luns(VDev *vdev, void *data, uint32_t data_size)
+static int scsi_report_luns(VDev *vdev, void *data, uint32_t data_size)
 {
     ScsiCdbReportLuns cdb = {
         .command = 0xa0,
@@ -144,13 +154,13 @@  static bool scsi_report_luns(VDev *vdev, void *data, uint32_t data_size)
         { data, data_size, VRING_DESC_F_WRITE },
     };
 
-    vs_run("report luns", report_luns,
+    int ret = vs_run("report luns", report_luns,
            vdev, &cdb, sizeof(cdb), data, data_size);
 
-    return virtio_scsi_response_ok(&resp);
+    return ret ? ret : virtio_scsi_response_ok(&resp);
 }
 
-static bool scsi_read_10(VDev *vdev,
+static int scsi_read_10(VDev *vdev,
                          unsigned long sector, int sectors, void *data,
                          unsigned int data_size)
 {
@@ -168,12 +178,13 @@  static bool scsi_read_10(VDev *vdev,
     debug_print_int("read_10  sector", sector);
     debug_print_int("read_10 sectors", sectors);
 
-    vs_run("read(10)", read_10, vdev, &cdb, sizeof(cdb), data, data_size);
+    int ret = vs_run("read(10)", read_10,
+            vdev, &cdb, sizeof(cdb), data, data_size);
 
-    return virtio_scsi_response_ok(&resp);
+    return ret ? ret : virtio_scsi_response_ok(&resp);
 }
 
-static bool scsi_read_capacity(VDev *vdev,
+static int scsi_read_capacity(VDev *vdev,
                                void *data, uint32_t data_size)
 {
     ScsiCdbReadCapacity16 cdb = {
@@ -187,10 +198,10 @@  static bool scsi_read_capacity(VDev *vdev,
         { data, data_size, VRING_DESC_F_WRITE },
     };
 
-    vs_run("read capacity", read_capacity_16,
+    int ret = vs_run("read capacity", read_capacity_16,
            vdev, &cdb, sizeof(cdb), data, data_size);
 
-    return virtio_scsi_response_ok(&resp);
+    return ret ? ret : virtio_scsi_response_ok(&resp);
 }
 
 /* virtio-scsi routines */
@@ -207,7 +218,7 @@  static int virtio_scsi_locate_device(VDev *vdev)
     static uint8_t data[16 + 8 * 63];
     ScsiLunReport *r = (void *) data;
     ScsiDevice *sdev = vdev->scsi_device;
-    int i, luns;
+    int i, ret, luns;
 
     /* QEMU has hardcoded channel #0 in many places.
      * If this hardcoded value is ever changed, we'll need to add code for
@@ -233,13 +244,21 @@  static int virtio_scsi_locate_device(VDev *vdev)
         sdev->channel = channel;
         sdev->target = target;
         sdev->lun = 0;          /* LUN has to be 0 for REPORT LUNS */
-        if (!scsi_report_luns(vdev, data, sizeof(data))) {
+        ret = scsi_report_luns(vdev, data, sizeof(data));
+        if (ret < 0) {
+            return ret;
+        }
+
+        else if (ret == 0) {
             if (resp.response == VIRTIO_SCSI_S_BAD_TARGET) {
                 continue;
             }
             printf("target 0x%X\n", target);
-            virtio_scsi_verify_response(&resp, "SCSI cannot report LUNs");
+            if (!virtio_scsi_verify_response(&resp, "SCSI cannot report LUNs")) {
+                return -EIO;
+            }
         }
+
         if (r->lun_list_len == 0) {
             printf("no LUNs for target 0x%X\n", target);
             continue;
@@ -283,7 +302,9 @@  int virtio_scsi_read_many(VDev *vdev,
         data_size = sector_count * virtio_get_block_size() * f;
         if (!scsi_read_10(vdev, sector * f, sector_count * f, load_addr,
                           data_size)) {
-            virtio_scsi_verify_response(&resp, "virtio-scsi:read_many");
+            if (!virtio_scsi_verify_response(&resp, "virtio-scsi:read_many")) {
+                return -1;
+            }
         }
         load_addr += data_size;
         sector += sector_count;
@@ -352,11 +373,16 @@  static int virtio_scsi_setup(VDev *vdev)
             uint8_t code = resp.sense[0] & SCSI_SENSE_CODE_MASK;
             uint8_t sense_key = resp.sense[2] & SCSI_SENSE_KEY_MASK;
 
-            IPL_assert(resp.sense_len != 0, "virtio-scsi:setup: no SENSE data");
+            if (resp.sense_len == 0) {
+                puts("virtio-scsi: setup: no SENSE data");
+                return -EINVAL;
+            }
 
-            IPL_assert(retry_test_unit_ready && code == 0x70 &&
-                       sense_key == SCSI_SENSE_KEY_UNIT_ATTENTION,
-                       "virtio-scsi:setup: cannot retry");
+            if (!retry_test_unit_ready || code != 0x70 ||
+                       sense_key != SCSI_SENSE_KEY_UNIT_ATTENTION) {
+                puts("virtio-scsi:setup: cannot retry");
+                return -EIO;
+            }
 
             /* retry on CHECK_CONDITION/UNIT_ATTENTION as it
              * may not designate a real error, but it may be
@@ -367,16 +393,22 @@  static int virtio_scsi_setup(VDev *vdev)
             continue;
         }
 
-        virtio_scsi_verify_response(&resp, "virtio-scsi:setup");
+        if (!virtio_scsi_verify_response(&resp, "virtio-scsi:setup")) {
+            return -1;
+        }
     }
 
     /* read and cache SCSI INQUIRY response */
-    if (!scsi_inquiry(vdev,
+    ret = scsi_inquiry(vdev,
                       SCSI_INQUIRY_STANDARD,
                       SCSI_INQUIRY_STANDARD_NONE,
                       scsi_inquiry_std_response,
-                      sizeof(scsi_inquiry_std_response))) {
-        virtio_scsi_verify_response(&resp, "virtio-scsi:setup:inquiry");
+                      sizeof(scsi_inquiry_std_response));
+    if (ret < 1) {
+        if (ret != 0 || !virtio_scsi_verify_response(&resp,
+                "virtio-scsi:setup:inquiry")) {
+            return -1;
+        }
     }
 
     if (virtio_scsi_inquiry_response_is_cdrom(scsi_inquiry_std_response)) {
@@ -385,12 +417,16 @@  static int virtio_scsi_setup(VDev *vdev)
         vdev->scsi_block_size = VIRTIO_ISO_BLOCK_SIZE;
     }
 
-    if (!scsi_inquiry(vdev,
+    ret = scsi_inquiry(vdev,
                       SCSI_INQUIRY_EVPD,
                       SCSI_INQUIRY_EVPD_SUPPORTED_PAGES,
                       evpd,
-                      sizeof(*evpd))) {
-        virtio_scsi_verify_response(&resp, "virtio-scsi:setup:supported_pages");
+                      sizeof(*evpd));
+    if (ret < 1) {
+        if (ret != 0 || !virtio_scsi_verify_response(&resp,
+                "virtio-scsi:setup:supported_pages")) {
+            return -1;
+        }
     }
 
     debug_print_int("EVPD length", evpd->page_length);
@@ -402,12 +438,16 @@  static int virtio_scsi_setup(VDev *vdev)
             continue;
         }
 
-        if (!scsi_inquiry(vdev,
+        ret = scsi_inquiry(vdev,
                           SCSI_INQUIRY_EVPD,
                           SCSI_INQUIRY_EVPD_BLOCK_LIMITS,
                           evpd_bl,
-                          sizeof(*evpd_bl))) {
-            virtio_scsi_verify_response(&resp, "virtio-scsi:setup:blocklimits");
+                          sizeof(*evpd_bl));
+        if (ret < 1) {
+            if (ret != 0 || !virtio_scsi_verify_response(&resp,
+                    "virtio-scsi:setup:blocklimits")) {
+                return -1;
+            }
         }
 
         debug_print_int("max transfer", evpd_bl->max_transfer);
@@ -423,8 +463,12 @@  static int virtio_scsi_setup(VDev *vdev)
     vdev->max_transfer = MIN_NON_ZERO(VIRTIO_SCSI_MAX_SECTORS,
                                       vdev->max_transfer);
 
-    if (!scsi_read_capacity(vdev, data, data_size)) {
-        virtio_scsi_verify_response(&resp, "virtio-scsi:setup:read_capacity");
+    ret = scsi_read_capacity(vdev, data, data_size);
+    if (ret < 1) {
+        if (ret != 0 || !virtio_scsi_verify_response(&resp,
+                "virtio-scsi:setup:read_capacity")) {
+            return -1;
+        }
     }
     scsi_parse_capacity_report(data, &vdev->scsi_last_block,
                                (uint32_t *) &vdev->scsi_block_size);
@@ -439,10 +483,15 @@  int virtio_scsi_setup_device(SubChannelId schid)
     vdev->schid = schid;
     virtio_setup_ccw(vdev);
 
-    IPL_assert(vdev->config.scsi.sense_size == VIRTIO_SCSI_SENSE_SIZE,
-               "Config: sense size mismatch");
-    IPL_assert(vdev->config.scsi.cdb_size == VIRTIO_SCSI_CDB_SIZE,
-               "Config: CDB size mismatch");
+    if (vdev->config.scsi.sense_size != VIRTIO_SCSI_SENSE_SIZE) {
+        puts("Config: sense size mismatch");
+        return -EINVAL;
+    }
+
+    if (vdev->config.scsi.cdb_size != VIRTIO_SCSI_CDB_SIZE) {
+        puts("Config: CDB size mismatch");
+        return -EINVAL;
+    }
 
     puts("Using virtio-scsi.");