From patchwork Fri Nov 1 20:27:25 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: dan tan X-Patchwork-Id: 13859743 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from lists.gnu.org (lists.gnu.org [209.51.188.17]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 5DA80E6F086 for ; Fri, 1 Nov 2024 20:28:49 +0000 (UTC) Received: from localhost ([::1] helo=lists1p.gnu.org) by lists.gnu.org with esmtp (Exim 4.90_1) (envelope-from ) id 1t6yFJ-00036B-3V; Fri, 01 Nov 2024 16:27:49 -0400 Received: from eggs.gnu.org ([2001:470:142:3::10]) by lists.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1t6yFG-00034e-Ct; Fri, 01 Nov 2024 16:27:46 -0400 Received: from mx0b-001b2d01.pphosted.com ([148.163.158.5]) by eggs.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1t6yFD-0001IR-Tw; Fri, 01 Nov 2024 16:27:46 -0400 Received: from pps.filterd (m0356516.ppops.net [127.0.0.1]) by mx0a-001b2d01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 4A1AmRRG018629; Fri, 1 Nov 2024 20:27:35 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ibm.com; h=cc :content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=pp1; bh=cdNr72 JERNA7d4Pm4ABYACEYSH32heoRjTucSsJ1tDs=; b=GLOUqb//HQqZASV3UXIdTU 8Z/pdUM23hmjoqApUMjFyFMpiX++7t3UNO9FagPXYj6mUd+KWLfdbvENyjHPQYxO S6ObvvWIGszhsy2ERtf6MLoDjGuIkA+eU0aQWFt69P/L+pOkMyrtVnnqzVC3iPm4 bw4eXxhzkoFlxEUGcWUNA9HcjC3w3ADdx9RV04YRltT4p8xkJukTEzGe23Yvf+5e Oi3tn3zRd1CGi8+SsDaGoMgd6LNdF4QIOjwjT44/VMb8SuLqKuqicq1gvG0pZ9SO Wo2Oi87BXirJFfwj3HY+wDzNrjDt06EU10mWZzgQOJkVh++gcdlXeVIfWbmvLu3g == Received: from ppma22.wdc07v.mail.ibm.com (5c.69.3da9.ip4.static.sl-reverse.com [169.61.105.92]) by mx0a-001b2d01.pphosted.com (PPS) with ESMTPS id 42mwj0a5gp-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 01 Nov 2024 20:27:34 +0000 (GMT) Received: from pps.filterd (ppma22.wdc07v.mail.ibm.com [127.0.0.1]) by ppma22.wdc07v.mail.ibm.com (8.18.1.2/8.18.1.2) with ESMTP id 4A1K2mWb028216; Fri, 1 Nov 2024 20:27:34 GMT Received: from smtprelay07.wdc07v.mail.ibm.com ([172.16.1.74]) by ppma22.wdc07v.mail.ibm.com (PPS) with ESMTPS id 42hb4ybecp-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 01 Nov 2024 20:27:34 +0000 Received: from smtpav01.wdc07v.mail.ibm.com (smtpav01.wdc07v.mail.ibm.com [10.39.53.228]) by smtprelay07.wdc07v.mail.ibm.com (8.14.9/8.14.9/NCO v10.0) with ESMTP id 4A1KRX7S40894834 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=OK); Fri, 1 Nov 2024 20:27:34 GMT Received: from smtpav01.wdc07v.mail.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id DB6B55805B; Fri, 1 Nov 2024 20:27:33 +0000 (GMT) Received: from smtpav01.wdc07v.mail.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id 5C33A5804B; Fri, 1 Nov 2024 20:27:33 +0000 (GMT) Received: from gfwa829.aus.stglabs.ibm.com (unknown [9.3.84.19]) by smtpav01.wdc07v.mail.ibm.com (Postfix) with ESMTP; Fri, 1 Nov 2024 20:27:33 +0000 (GMT) From: dan tan To: qemu-devel@nongnu.org Cc: qemu-ppc@nongnu.org, stefanb@linux.vnet.ibm.com, pbonzini@redhat.com, farosas@suse.de, lvivier@redhat.com, clg@kaod.org, dantan@linux.vnet.ibm.com Subject: [PATCH v4 1/3] tpm/tpm_tis_spi: Support TPM for SPI (Serial Peripheral Interface) Date: Fri, 1 Nov 2024 15:27:25 -0500 Message-Id: <20241101202727.9023-2-dantan@linux.vnet.ibm.com> X-Mailer: git-send-email 2.39.5 In-Reply-To: <20241101202727.9023-1-dantan@linux.vnet.ibm.com> References: <20241101202727.9023-1-dantan@linux.vnet.ibm.com> MIME-Version: 1.0 X-TM-AS-GCONF: 00 X-Proofpoint-GUID: aIQUMnLWzfLH5RZac2jJtWMuEfyLfLPr X-Proofpoint-ORIG-GUID: aIQUMnLWzfLH5RZac2jJtWMuEfyLfLPr X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1051,Hydra:6.0.680,FMLib:17.12.62.30 definitions=2024-10-15_01,2024-10-11_01,2024-09-30_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 bulkscore=0 phishscore=0 impostorscore=0 adultscore=0 mlxscore=0 lowpriorityscore=0 clxscore=1015 suspectscore=0 priorityscore=1501 mlxlogscore=999 malwarescore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2409260000 definitions=main-2411010144 Received-SPF: none client-ip=148.163.158.5; envelope-from=dantan@linux.vnet.ibm.com; helo=mx0b-001b2d01.pphosted.com X-Spam_score_int: -26 X-Spam_score: -2.7 X-Spam_bar: -- X-Spam_report: (-2.7 / 5.0 requ) BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_EF=-0.1, RCVD_IN_DNSWL_LOW=-0.7, RCVD_IN_MSPIKE_H3=0.001, RCVD_IN_MSPIKE_WL=0.001, RCVD_IN_VALIDITY_CERTIFIED_BLOCKED=0.001, RCVD_IN_VALIDITY_RPBL_BLOCKED=0.001, SPF_HELO_NONE=0.001, SPF_NONE=0.001 autolearn=ham autolearn_force=no X-Spam_action: no action X-BeenThere: qemu-devel@nongnu.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: qemu-devel-bounces+qemu-devel=archiver.kernel.org@nongnu.org Sender: qemu-devel-bounces+qemu-devel=archiver.kernel.org@nongnu.org Implement support for TPM via SPI interface. The SPI bus master is provided by PowerNV SPI device which is an SSI peripheral. It can uses the tpm_emulator driver backend with the external swtpm. Although the implementation is endian neutral, the SPI bus master provider, pnv_spi.c is only supported on the PowerNV platform, thus, is big endian specific. tpm/tpm_tis_spi: Support TPM for SPI (rev 4) - moved variable tis_addr from TPMStateSPI struct to local - added the VM suspend/resume support: - added vmstate_tpm_tis_spi declaration - added tpm_tis_spi_pre_save() function - fixed trace formatting string Signed-off-by: dan tan --- docs/specs/tpm.rst | 15 ++ include/sysemu/tpm.h | 3 + hw/tpm/tpm_tis_spi.c | 360 +++++++++++++++++++++++++++++++++++++++++++ hw/tpm/Kconfig | 6 + hw/tpm/meson.build | 1 + hw/tpm/trace-events | 7 + 6 files changed, 392 insertions(+) create mode 100644 hw/tpm/tpm_tis_spi.c diff --git a/docs/specs/tpm.rst b/docs/specs/tpm.rst index 1ad36ad709..63c3a43c7d 100644 --- a/docs/specs/tpm.rst +++ b/docs/specs/tpm.rst @@ -24,6 +24,7 @@ QEMU files related to TPM TIS interface: - ``hw/tpm/tpm_tis_isa.c`` - ``hw/tpm/tpm_tis_sysbus.c`` - ``hw/tpm/tpm_tis_i2c.c`` + - ``hw/tpm/tpm_tis_spi.c`` - ``hw/tpm/tpm_tis.h`` Both an ISA device and a sysbus device are available. The former is @@ -33,6 +34,9 @@ Arm virt machine. An I2C device support is also provided which can be instantiated in the Arm based emulation machines. This device only supports the TPM 2 protocol. +A Serial Peripheral Interface (SPI) device support has been added to the +PowerNV emulation machines. This device only supports the TPM 2 protocol. + CRB interface ------------- @@ -371,6 +375,17 @@ attached to I2C bus, use the following command line: echo tpm_tis_i2c 0x2e > /sys/bus/i2c/devices/i2c-12/new_device +In case a PowerNV machine is emulated and you want to use a TPM device +attached to SPI bus, use the following command line (SPI bus master is +provided by PowerNV SPI device): + +.. code-block:: console + + qemu-system-ppc64 -m 2G -machine powernv10 -nographic \ + -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \ + -tpmdev emulator,id=tpm0,chardev=chrtpm \ + -device tpm-tis-spi,tpmdev=tpm0,bus=pnv-spi-bus.4 + In case SeaBIOS is used as firmware, it should show the TPM menu item after entering the menu with 'ESC'. diff --git a/include/sysemu/tpm.h b/include/sysemu/tpm.h index 1ee568b3b6..22b05110e2 100644 --- a/include/sysemu/tpm.h +++ b/include/sysemu/tpm.h @@ -49,6 +49,7 @@ struct TPMIfClass { #define TYPE_TPM_CRB "tpm-crb" #define TYPE_TPM_SPAPR "tpm-spapr" #define TYPE_TPM_TIS_I2C "tpm-tis-i2c" +#define TYPE_TPM_TIS_SPI "tpm-tis-spi" #define TPM_IS_TIS_ISA(chr) \ object_dynamic_cast(OBJECT(chr), TYPE_TPM_TIS_ISA) @@ -60,6 +61,8 @@ struct TPMIfClass { object_dynamic_cast(OBJECT(chr), TYPE_TPM_SPAPR) #define TPM_IS_TIS_I2C(chr) \ object_dynamic_cast(OBJECT(chr), TYPE_TPM_TIS_I2C) +#define TPM_IS_TIS_SPI(chr) \ + object_dynamic_cast(OBJECT(chr), TYPE_TPM_TIS_SPI) /* returns NULL unless there is exactly one TPM device */ static inline TPMIf *tpm_find(void) diff --git a/hw/tpm/tpm_tis_spi.c b/hw/tpm/tpm_tis_spi.c new file mode 100644 index 0000000000..4aee1c6d6c --- /dev/null +++ b/hw/tpm/tpm_tis_spi.c @@ -0,0 +1,360 @@ +/* + * QEMU PowerPC SPI TPM 2.0 model + * + * Copyright (c) 2024, IBM Corporation. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#define IBM_PONQ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/sysbus.h" +#include "hw/acpi/tpm.h" +#include "tpm_prop.h" +#include "qemu/log.h" +#include "trace.h" +#include "tpm_tis.h" +#include "hw/ssi/ssi.h" +#include "migration/vmstate.h" + +typedef struct TPMStateSPI { + /*< private >*/ + SSIPeripheral parent_object; + + uint8_t byte_offset; /* byte offset in transfer */ + uint8_t wait_state_cnt; /* wait state counter */ + uint8_t xfer_size; /* data size of transfer */ + uint32_t reg_addr; /* register address of transfer */ + + uint8_t spi_state; /* READ / WRITE / IDLE */ +#define SPI_STATE_IDLE 0 +#define SPI_STATE_WRITE 1 +#define SPI_STATE_READ 2 + + bool command; + + /*< public >*/ + TPMState tpm_state; /* not a QOM object */ + +} TPMStateSPI; + +#define CMD_BYTE_WRITE (1 << 7) +#define CMD_BYTE_XFER_SZ_MASK 0x1f +#define TIS_SPI_HIGH_ADDR_BYTE 0xd4 + +DECLARE_INSTANCE_CHECKER(TPMStateSPI, TPM_TIS_SPI, TYPE_TPM_TIS_SPI) + +static int tpm_tis_spi_pre_save(void *opaque) +{ + TPMStateSPI *spist = opaque; + + return tpm_tis_pre_save(&spist->tpm_state); +} + +static const VMStateDescription vmstate_tpm_tis_spi = { + .name = "tpm-tis-spi", + .version_id = 0, + .pre_save = tpm_tis_spi_pre_save, + .fields = (const VMStateField[]) { + VMSTATE_BUFFER(tpm_state.buffer, TPMStateSPI), + VMSTATE_UINT16(tpm_state.rw_offset, TPMStateSPI), + VMSTATE_UINT8(tpm_state.active_locty, TPMStateSPI), + VMSTATE_UINT8(tpm_state.aborting_locty, TPMStateSPI), + VMSTATE_UINT8(tpm_state.next_locty, TPMStateSPI), + + VMSTATE_STRUCT_ARRAY(tpm_state.loc, TPMStateSPI, + TPM_TIS_NUM_LOCALITIES, 0, + vmstate_locty, TPMLocality), + + /* spi specifics */ + VMSTATE_UINT8(byte_offset, TPMStateSPI), + VMSTATE_UINT8(wait_state_cnt, TPMStateSPI), + VMSTATE_UINT8(xfer_size, TPMStateSPI), + VMSTATE_UINT32(reg_addr, TPMStateSPI), + VMSTATE_UINT8(spi_state, TPMStateSPI), + VMSTATE_BOOL(command, TPMStateSPI), + + VMSTATE_END_OF_LIST() + } +}; + +static inline void tpm_tis_spi_clear_data(TPMStateSPI *spist) +{ + spist->spi_state = SPI_STATE_IDLE; + spist->byte_offset = 0; + spist->wait_state_cnt = 0; + spist->xfer_size = 0; + spist->reg_addr = 0; + + return; +} + +/* Callback from TPM to indicate that response is copied */ +static void tpm_tis_spi_request_completed(TPMIf *ti, int ret) +{ + TPMStateSPI *spist = TPM_TIS_SPI(ti); + TPMState *s = &spist->tpm_state; + + /* Inform the common code. */ + tpm_tis_request_completed(s, ret); +} + +static enum TPMVersion tpm_tis_spi_get_tpm_version(TPMIf *ti) +{ + TPMStateSPI *spist = TPM_TIS_SPI(ti); + TPMState *s = &spist->tpm_state; + + return tpm_tis_get_tpm_version(s); +} + +/* + * TCG PC Client Platform TPM Profile Specification for TPM 2.0 ver 1.05 rev 14 + * + * For system Software, the TPM has a 64-bit address of 0x0000_0000_FED4_xxxx. + * On SPI, the chipset passes the least significant 24 bits to the TPM. + * The upper bytes will be used by the chipset to select the TPM’s SPI CS# + * signal. Table 9 shows the locality based on the 16 least significant address + * bits and assume that either the LPC TPM sync or SPI TPM CS# is used. + * + */ +static void tpm_tis_spi_write(TPMStateSPI *spist, uint32_t addr, uint8_t val) +{ + TPMState *tpm_st = &spist->tpm_state; + + trace_tpm_tis_spi_write(addr, val); + tpm_tis_write_data(tpm_st, addr, val, 1); +} + +static uint8_t tpm_tis_spi_read(TPMStateSPI *spist, uint32_t addr) +{ + TPMState *tpm_st = &spist->tpm_state; + uint8_t data; + + data = tpm_tis_read_data(tpm_st, addr, 1); + trace_tpm_tis_spi_read(addr, data); + return data; +} + +static Property tpm_tis_spi_properties[] = { + DEFINE_PROP_TPMBE("tpmdev", TPMStateSPI, tpm_state.be_driver), + DEFINE_PROP_UINT32("irq", TPMStateSPI, tpm_state.irq_num, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void tpm_tis_spi_reset(DeviceState *dev) +{ + TPMStateSPI *spist = TPM_TIS_SPI(dev); + TPMState *s = &spist->tpm_state; + + tpm_tis_spi_clear_data(spist); + return tpm_tis_reset(s); +} + +static uint32_t tpm_transfer(SSIPeripheral *ss, uint32_t tx) +{ + TPMStateSPI *spist = TPM_TIS_SPI(ss); + uint32_t rx = 0; + uint8_t byte; /* reversed byte value */ + uint8_t offset = 0; /* offset of byte in payload */ + uint8_t index; /* index of data byte in transfer */ + uint32_t tis_addr; /* tis address including locty */ + + /* new transfer or not */ + if (spist->command) { /* new transfer start */ + if (spist->spi_state != SPI_STATE_IDLE) { + qemu_log_mask(LOG_GUEST_ERROR, "unexpected new transfer\n"); + } + spist->byte_offset = 0; + spist->wait_state_cnt = 0; + } + /* + * Explanation of wait_state: + * The original TPM model did not have wait state or "flow control" support + * built in. If you wanted to read a TPM register through SPI you sent + * the first byte with the read/write bit and size, then three address bytes + * and any additional bytes after that were don't care bytes for reads and + * the model would begin returning byte data to the SPI reader from the + * register address provided. In the real world this would mean that a + * TPM device had only the time between the 31st clock and the 32nd clock + * to fetch the register data that it had to provide to SPI MISO starting + * with the 32nd clock. + * + * In reality the TPM begins introducing a wait state at the 31st clock + * by holding MISO low. This is how it controls the "flow" of the + * operation. Once the data the TPM needs to return is ready it will + * select bit 31 + (8*N) to send back a 1 which indicates that it will + * now start returning data on MISO. + * + * The same wait states are applied to writes. In either the read or write + * case the wait state occurs between the command+address (4 bytes) and the + * data (1-n bytes) sections of the SPI frame. The code below introduces + * the support for a 32 bit wait state for P10. All reads and writes + * through the SPI interface MUST now be aware of the need to do flow + * control in order to use the TPM via SPI. + * + * In conjunction with these changes there were changes made to the SPIM + * engine that was introduced in P10 to support the 6x op code which is + * used to receive wait state 0s on the MISO line until it sees the b'1' + * come back before continuing to read real data from the SPI device(TPM). + */ + + trace_tpm_tis_spi_transfer_data("Payload byte_offset", spist->byte_offset); + /* process payload data */ + while (offset < 4) { + spist->command = false; + byte = (tx >> (24 - 8 * offset)) & 0xFF; + trace_tpm_tis_spi_transfer_data("Extracted byte", byte); + trace_tpm_tis_spi_transfer_data("Payload offset", offset); + switch (spist->byte_offset) { + case 0: /* command byte */ + if ((byte & CMD_BYTE_WRITE) == 0) { /* bit-7 */ + spist->spi_state = SPI_STATE_WRITE; + trace_tpm_tis_spi_transfer_event("spi write"); + } else { + spist->spi_state = SPI_STATE_READ; + trace_tpm_tis_spi_transfer_event("spi read"); + } + spist->xfer_size = (byte & CMD_BYTE_XFER_SZ_MASK) + 1; + trace_tpm_tis_spi_transfer_data("xfer_size", spist->xfer_size); + break; + case 1: /* 1st address byte */ + if (byte != TIS_SPI_HIGH_ADDR_BYTE) { + qemu_log_mask(LOG_GUEST_ERROR, "incorrect high address 0x%x\n", + byte); + } + spist->reg_addr = byte << 16; + trace_tpm_tis_spi_transfer_data("first addr byte", byte); + trace_tpm_tis_spi_transfer_addr("reg_addr", spist->reg_addr); + break; + case 2: /* 2nd address byte */ + spist->reg_addr |= byte << 8; + trace_tpm_tis_spi_transfer_data("second addr byte", byte); + trace_tpm_tis_spi_transfer_addr("reg_addr", spist->reg_addr); + break; + case 3: /* 3rd address byte */ + spist->reg_addr |= byte; + trace_tpm_tis_spi_transfer_data("third addr byte", byte); + trace_tpm_tis_spi_transfer_addr("reg_addr", spist->reg_addr); + break; + default: /* data bytes */ + if (spist->wait_state_cnt < 4) { + spist->wait_state_cnt++; + if (spist->wait_state_cnt == 4) { + trace_tpm_tis_spi_transfer_data("wait complete, count", + spist->wait_state_cnt); + rx = rx | (0x01 << (24 - offset * 8)); + return rx; + } else { + trace_tpm_tis_spi_transfer_data("in wait state, count", + spist->wait_state_cnt); + rx = 0; + } + } else { + index = spist->byte_offset - 4; + trace_tpm_tis_spi_transfer_data("index", index); + trace_tpm_tis_spi_transfer_data("data byte", byte); + trace_tpm_tis_spi_transfer_addr("reg_addr", spist->reg_addr); + if (index >= spist->xfer_size) { + /* + * SPI SSI framework limits both rx and tx + * to fixed 4-byte with each xfer + */ + trace_tpm_tis_spi_transfer_event("index exceeds xfer_size"); + return rx; + } + tis_addr = spist->reg_addr + (index % 4); + if (spist->spi_state == SPI_STATE_WRITE) { + tpm_tis_spi_write(spist, tis_addr, byte); + } else { + byte = tpm_tis_spi_read(spist, tis_addr); + rx = rx | (byte << (24 - offset * 8)); + trace_tpm_tis_spi_transfer_data("byte added to response", + byte); + trace_tpm_tis_spi_transfer_data("offset", offset); + } + } + break; + } + if ((spist->wait_state_cnt == 0) || (spist->wait_state_cnt == 4)) { + offset++; + spist->byte_offset++; + } else { + break; + } + } + return rx; +} + +static int tpm_cs(SSIPeripheral *ss, bool select) +{ + TPMStateSPI *spist = TPM_TIS_SPI(ss); + + if (select) { + spist->command = false; + spist->spi_state = SPI_STATE_IDLE; + } else { + spist->command = true; + } + return 0; +} + +static void tpm_realize(SSIPeripheral *dev, Error **errp) +{ + TPMStateSPI *spist = TPM_TIS_SPI(dev); + TPMState *s = &spist->tpm_state; + + if (!tpm_find()) { + error_setg(errp, "at most one TPM device is permitted"); + return; + } + + s->be_driver = qemu_find_tpm_be("tpm0"); + + if (!s->be_driver) { + error_setg(errp, "unable to find tpm backend device"); + return; + } +} + +static void tpm_tis_spi_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + TPMIfClass *tc = TPM_IF_CLASS(klass); + SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass); + + k->transfer = tpm_transfer; + k->realize = tpm_realize; + k->set_cs = tpm_cs; + k->cs_polarity = SSI_CS_LOW; + + device_class_set_legacy_reset(dc, tpm_tis_spi_reset); + device_class_set_props(dc, tpm_tis_spi_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); + + dc->desc = "SPI TPM"; + dc->vmsd = &vmstate_tpm_tis_spi; + + tc->model = TPM_MODEL_TPM_TIS; + tc->request_completed = tpm_tis_spi_request_completed; + tc->get_version = tpm_tis_spi_get_tpm_version; +} + +static const TypeInfo tpm_tis_spi_info = { + .name = TYPE_TPM_TIS_SPI, + .parent = TYPE_SSI_PERIPHERAL, + .instance_size = sizeof(TPMStateSPI), + .class_init = tpm_tis_spi_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_TPM_IF }, + { } + } +}; + +static void tpm_tis_spi_register_types(void) +{ + type_register_static(&tpm_tis_spi_info); +} + +type_init(tpm_tis_spi_register_types) diff --git a/hw/tpm/Kconfig b/hw/tpm/Kconfig index a46663288c..5951c225cc 100644 --- a/hw/tpm/Kconfig +++ b/hw/tpm/Kconfig @@ -5,6 +5,12 @@ config TPM_TIS_I2C select I2C select TPM_TIS +config TPM_TIS_SPI + bool + depends on TPM + select TPM_BACKEND + select TPM_TIS + config TPM_TIS_ISA bool depends on TPM && ISA_BUS diff --git a/hw/tpm/meson.build b/hw/tpm/meson.build index 6968e60b3f..e03cfb11b9 100644 --- a/hw/tpm/meson.build +++ b/hw/tpm/meson.build @@ -2,6 +2,7 @@ system_ss.add(when: 'CONFIG_TPM_TIS', if_true: files('tpm_tis_common.c')) system_ss.add(when: 'CONFIG_TPM_TIS_ISA', if_true: files('tpm_tis_isa.c')) system_ss.add(when: 'CONFIG_TPM_TIS_SYSBUS', if_true: files('tpm_tis_sysbus.c')) system_ss.add(when: 'CONFIG_TPM_TIS_I2C', if_true: files('tpm_tis_i2c.c')) +system_ss.add(when: 'CONFIG_TPM_TIS_SPI', if_true: files('tpm_tis_spi.c')) system_ss.add(when: 'CONFIG_TPM_CRB', if_true: files('tpm_crb.c')) system_ss.add(when: 'CONFIG_TPM_TIS', if_true: files('tpm_ppi.c')) system_ss.add(when: 'CONFIG_TPM_CRB', if_true: files('tpm_ppi.c')) diff --git a/hw/tpm/trace-events b/hw/tpm/trace-events index fa882dfefe..0324ceb6d0 100644 --- a/hw/tpm/trace-events +++ b/hw/tpm/trace-events @@ -42,3 +42,10 @@ tpm_tis_i2c_recv(uint8_t data) "TPM I2C read: 0x%X" tpm_tis_i2c_send(uint8_t data) "TPM I2C write: 0x%X" tpm_tis_i2c_event(const char *event) "TPM I2C event: %s" tpm_tis_i2c_send_reg(const char *name, int reg) "TPM I2C write register: %s(0x%X)" + +# tpm_tis_spi.c +tpm_tis_spi_write(uint32_t addr, uint8_t val) "TPM SPI write - addr:0x%08X 0x%02x" +tpm_tis_spi_read(uint32_t addr, uint8_t val) "TPM SPI read - addr:0x%08X 0x%02x" +tpm_tis_spi_transfer_event(const char *event) "TPM SPI XFER event: %s" +tpm_tis_spi_transfer_data(const char *name, uint8_t val) "TPM SPI XFER: %s = 0x%02x" +tpm_tis_spi_transfer_addr(const char *name, uint32_t addr) "TPM SPI XFER: %s = 0x%08x"