| Message ID | 20241103210829.2307729-1-clg@redhat.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] aspeed: Don't set always boot properties of the emmc device | expand |
On Sun, 2024-11-03 at 22:08 +0100, Cédric Le Goater wrote: > Commit e554e45b4478 ("aspeed: Tune eMMC device properties to reflect > HW strapping") added support to boot from an eMMC device by setting > the boot properties of the eMMC device. This change made the > assumption that the device always has boot areas. > > However, if the machine boots from the flash device (or -kernel) and > uses an eMMC device without boot areas, support would be broken. This > impacts the ast2600-evb machine which can choose to boot from flash or > eMMC using the "boot-emmc" machine option. > > To provide some flexibility for Aspeed machine users to use different > flavors of eMMC devices (with or without boot areas), do not set the > eMMC device boot properties when the machine is not configured to boot > from eMMC. However, this approach makes another assumption about eMMC > devices, namely that eMMC devices from which the machine does not boot > do not have boot areas. > > A preferable alternative would be to add support for user creatable > eMMC devices and define the device boot properties on the QEMU command > line : > > -blockdev node-name=emmc0,driver=file,filename=mmc-ast2600-evb.raw \ > -device emmc,bus=sdhci-bus.2,drive=emmc0,boot-partition-size=1048576,boot-config=8 > > This is a global change requiring more thinking. Nevertheless, in the > case of the ast2600-evb machine booting from an eMMC device and when > default devices are created, the proposed change still makes sense > since the device is required to have boot areas. > > Cc: Jan Luebbe <jlu@pengutronix.de> > Fixes: e554e45b4478 ("aspeed: Tune eMMC device properties to reflect > HW strapping") > Signed-off-by: Cédric Le Goater <clg@redhat.com> > Tested-by: Guenter Roeck <linux@roeck-us.net> > --- > > Changes in v2: > > - Simplified "boot-config setting > > hw/arm/aspeed.c | 16 +++++++++++++--- > 1 file changed, 13 insertions(+), 3 deletions(-) > > diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c > index e447923536b4..6ca145362cbd 100644 > --- a/hw/arm/aspeed.c > +++ b/hw/arm/aspeed.c > @@ -338,10 +338,20 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc, > return; > } > card = qdev_new(emmc ? TYPE_EMMC : TYPE_SD_CARD); > - if (emmc) { > + > + /* > + * Force the boot properties of the eMMC device only when the > + * machine is strapped to boot from eMMC. Without these > + * settings, the machine would not boot. > + * > + * This also allows the machine to use an eMMC device without > + * boot areas when booting from the flash device (or -kernel) > + * Ideally, the device and its properties should be defined on > + * the command line. > + */ > + if (emmc && boot_emmc) { > qdev_prop_set_uint64(card, "boot-partition-size", 1 * MiB); > - qdev_prop_set_uint8(card, "boot-config", > - boot_emmc ? 0x1 << 3 : 0x0); > + qdev_prop_set_uint8(card, "boot-config", 0x1 << 3); > } > qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), > &error_fatal); Reviewed-by: Jan Luebbe <jlu@pengutronix.de> Thanks, Jan
On 3/11/24 18:08, Cédric Le Goater wrote: > Commit e554e45b4478 ("aspeed: Tune eMMC device properties to reflect > HW strapping") added support to boot from an eMMC device by setting > the boot properties of the eMMC device. This change made the > assumption that the device always has boot areas. > > However, if the machine boots from the flash device (or -kernel) and > uses an eMMC device without boot areas, support would be broken. This > impacts the ast2600-evb machine which can choose to boot from flash or > eMMC using the "boot-emmc" machine option. > > To provide some flexibility for Aspeed machine users to use different > flavors of eMMC devices (with or without boot areas), do not set the > eMMC device boot properties when the machine is not configured to boot > from eMMC. However, this approach makes another assumption about eMMC > devices, namely that eMMC devices from which the machine does not boot > do not have boot areas. > > A preferable alternative would be to add support for user creatable > eMMC devices and define the device boot properties on the QEMU command > line : > > -blockdev node-name=emmc0,driver=file,filename=mmc-ast2600-evb.raw \ > -device emmc,bus=sdhci-bus.2,drive=emmc0,boot-partition-size=1048576,boot-config=8 > > This is a global change requiring more thinking. Nevertheless, in the > case of the ast2600-evb machine booting from an eMMC device and when > default devices are created, the proposed change still makes sense > since the device is required to have boot areas. > > Cc: Jan Luebbe <jlu@pengutronix.de> > Fixes: e554e45b4478 ("aspeed: Tune eMMC device properties to reflect > HW strapping") > Signed-off-by: Cédric Le Goater <clg@redhat.com> > Tested-by: Guenter Roeck <linux@roeck-us.net> > --- > > Changes in v2: > > - Simplified "boot-config setting > > hw/arm/aspeed.c | 16 +++++++++++++--- > 1 file changed, 13 insertions(+), 3 deletions(-) Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index e447923536b4..6ca145362cbd 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -338,10 +338,20 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc, return; } card = qdev_new(emmc ? TYPE_EMMC : TYPE_SD_CARD); - if (emmc) { + + /* + * Force the boot properties of the eMMC device only when the + * machine is strapped to boot from eMMC. Without these + * settings, the machine would not boot. + * + * This also allows the machine to use an eMMC device without + * boot areas when booting from the flash device (or -kernel) + * Ideally, the device and its properties should be defined on + * the command line. + */ + if (emmc && boot_emmc) { qdev_prop_set_uint64(card, "boot-partition-size", 1 * MiB); - qdev_prop_set_uint8(card, "boot-config", - boot_emmc ? 0x1 << 3 : 0x0); + qdev_prop_set_uint8(card, "boot-config", 0x1 << 3); } qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), &error_fatal);
Commit e554e45b4478 ("aspeed: Tune eMMC device properties to reflect HW strapping") added support to boot from an eMMC device by setting the boot properties of the eMMC device. This change made the assumption that the device always has boot areas. However, if the machine boots from the flash device (or -kernel) and uses an eMMC device without boot areas, support would be broken. This impacts the ast2600-evb machine which can choose to boot from flash or eMMC using the "boot-emmc" machine option. To provide some flexibility for Aspeed machine users to use different flavors of eMMC devices (with or without boot areas), do not set the eMMC device boot properties when the machine is not configured to boot from eMMC. However, this approach makes another assumption about eMMC devices, namely that eMMC devices from which the machine does not boot do not have boot areas. A preferable alternative would be to add support for user creatable eMMC devices and define the device boot properties on the QEMU command line : -blockdev node-name=emmc0,driver=file,filename=mmc-ast2600-evb.raw \ -device emmc,bus=sdhci-bus.2,drive=emmc0,boot-partition-size=1048576,boot-config=8 This is a global change requiring more thinking. Nevertheless, in the case of the ast2600-evb machine booting from an eMMC device and when default devices are created, the proposed change still makes sense since the device is required to have boot areas. Cc: Jan Luebbe <jlu@pengutronix.de> Fixes: e554e45b4478 ("aspeed: Tune eMMC device properties to reflect HW strapping") Signed-off-by: Cédric Le Goater <clg@redhat.com> Tested-by: Guenter Roeck <linux@roeck-us.net> --- Changes in v2: - Simplified "boot-config setting hw/arm/aspeed.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)