@@ -391,6 +391,12 @@ static void aspeed_soc_ast2700_init(Object *obj)
/* Init sd card slot class here so that they're under the correct parent */
object_initialize_child(obj, "sd-controller.sdhci",
&s->sdhci.slots[0], TYPE_SYSBUS_SDHCI);
+
+ object_initialize_child(obj, "emmc-controller", &s->emmc, typename);
+ object_property_set_int(OBJECT(&s->emmc), "num-slots", 1, &error_abort);
+
+ object_initialize_child(obj, "emmc-controller.sdhci", &s->emmc.slots[0],
+ TYPE_SYSBUS_SDHCI);
}
/*
@@ -701,6 +707,15 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_SDHCI));
+ /* eMMC */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->emmc), errp)) {
+ return;
+ }
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->emmc), 0,
+ sc->memmap[ASPEED_DEV_EMMC]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0,
+ aspeed_soc_get_irq(s, ASPEED_DEV_EMMC));
+
create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);
Add SDHCI model for AST2700 eMMC support. The eMMC controller only support 1 slot and registers base address is start at 0x1209_0000 and its interrupt is connected to GICINT 15. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> --- hw/arm/aspeed_ast27x0.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)